Used Martina 30 for sale (24,815)

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Fpodpfsk Aa Unex Ap Dsn For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Fedpfxjt D R R Ee Ap Djpn With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2016, Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Belt width (RB): 1000 mm Frame height: 150 mm Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable V 380-500 kW 0.4-4 Fjdpfek Abifsx Ap Depn Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left Fjdpfx Aozycpxsp Djpn * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1995, turning diameter 510 mm Fsdozyvcrspfx Ap Dspn turning length 1000 mm control MAZATROL T PLUS total power requirement 22-26 kW weight of the machine ca. 6,5 t

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/90/H75 mm -Total weight: 4.5 kg Fodszxyvyepfx Ap Djpn

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/90/H75 mm -Total weight: 4.4 kg Fjdpfx Ajzxzg Tep Dopn

Condition: used, Punching force: 300 kN Dimension(e) e.g. a 20 mm hole in 12 mm steel Stroke triggering via foot switch Assortment of tools is included in the price Fodpsxcndyofx Ap Dspn Very good condition

Condition: new, pressure 30 t Fjdpfxexabg Ns Ap Djpn stroke 150 mm table surface area 185 mm Breite column travel between the guideways 530 mm weight of the machine ca. 162 kg dimensions of the machine ca. 800 x 700 x 1805 mm

Condition: used, functionality: unexamined, Ferwood Code: RU0012082 - Manufacturer Code: V15-30-00-08 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 8KG - Dimensions: 70X46X34 cm - If interested, we offer a refurbishment service; please contact us. Fpjdpfx Aeyz U Sdsp Den

Condition: used, functionality: unexamined, Ferwood Code: RU0011174 - Manufacturer Code: H6161090B4 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC BIESSE - If interested, we offer an overhaul service; please contact us. Fpsdpfxezmihnj Ap Den

Condition: excellent (used), functionality: fully functional, VERTICAL CLAMP PRESS , HYDRAULIC , model ITALPRESSE PROGRAM 30 second hand machine operation in manual and/or automatic mode with automatic piston opening timer volt. 380/50 technical data: max. useful working dimensions mm. 3000 x 1700 min. useful working dimensions mm. 250 x 340 hydraulic pump , motor power Hp 2 adjustable vertical pressure adjustable horizontal pressure movable control panel Fsdpfx Apeuxdpre Dspn base with height adjustment overall dimensions mm 3600 x 1000 x 2340 (H)

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, warranty duration: 12 months, Our company (EXPOGLASS®) manufactures machines, glass racks for the glass industry. Our offer includes a 321 x 255 pull-out glass rack. New product on request. Technical data : Number of drawers - 30 Size of panes - 2550 X 3210 for storage Load capacity of a single drawer - 1500 kg Loading space width - 80 mm Total storage width - 4460 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - floor friendly polyamide Rear wheel of drawer - steel - turned, bearing-mounted, with Fpjdpfx Apsh Uudvo Den double flange, running on steel track We export our products all over the world.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,137 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion engine forklift Load center: 500 Fodpfx Apjz Ecvgo Depn ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 80 - 100% Description: Delivery includes a new FEM 4.004 inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We would be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded at the time the listing was created. Subject to prior sale, changes and errors. Side shifter, pre-installed side shifter 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light, seat heating.

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 430 mm, area performance: 1,160 m²/h, overall weight: 127 kg, tank capacity: 30 l, total height: 1,020 mm, total width: 560 mm, total length: 1,210 mm, water tank capacity: 30 l, battery voltage: 24 V, gradeability: 2 %, TECHNICAL SPECIFICATIONS Fodjzpxm Sopfx Ap Djpn FEATURES Working width (cleaning) mm 430 Working width (vacuuming) mm 650 Area performance/hour (theoretical - practical) m²/h 1720 - 1030 Power supply Battery 24V Power consumption W 600 Drive type Manual IP rating IPX3 BATTERIES Type Gel battery set (2 units) 12V 50Ah (*) Battery life h - min 1 h and 30 min Dimensions battery compartment x quantity mm x no. 340x340x240 X 1 BRUSHES Diameter pad x quantity mm - inch x no. 430 - 17” x 1 Motor power x quantity W x no. 200 x 1 Motor speed rpm 120 Weight (head) - specific pressure Kg - g/cm² 18 - 17.4 TRACTION Motor power W --- Maximum travel speed Km/h 4 Climbing ability at full load % 2 VACUUMING Motor power W 400 Vacuum (water column) mbar - mmH2O 1189 Airflow rate l/s 28 Noise level dB(A) 64 TANK Type Double tank Capacity (cleaning solution) l 30 Capacity (dirty water tank) l 33 Weight (without/with batteries) Kg 66 / 104 Dimensions mm 1210x560x1020

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm 590 x 450 mm 125 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Fpsdpfx Apjynnczj Den Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, maximum load weight: 30,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2013, next inspection (TÜV): 10/2026, total length: 12,627 mm, total width: 2,495 mm, total height: 1,500 mm, Equipment: ABS,

Condition: good (used), functionality: fully functional, total height: 2,100 mm, total width: 1,400 mm, table length: 480 mm, table width: 450 mm, pressing force: 30 t, distance between side stands: 280 mm, year of last overhaul: 2026, Stroke: 16-40 mm Fedpsz Hk I Tefx Ap Dopn Strokes per minute: 100-600

Condition: used, Year of construction: 1984, x-travel 760 mm y-travel 381 mm z-travel 450 mm quill stroke 152 mm table-size 1300 x 305 mm control Heidenhain TNC 360 tool adaptor SK40 turning speed range 100- 4.000 U/min rapid speed 5000 / 7000 m/min feed speeds 2,5 bis 3000 mm/min power requirement 2.2 kW diameter of quill 101 mm total power requirement 15,0 kW weight of the machine ca. 2,4 t dimensions 2,4 x 2,3 x 2,2 m Equipment: - Heidenhain TNC 360 - Coolant system - Hydraulic tool clamping - Milling head with quill - Machine light Fsdpfx Aoz Euv Sop Depn - Chip tray - Documentation

Condition: new, Year of construction: 2026, power: 30 kW (40.79 HP), motor manufacturer: Yunnei / DEF20CFA4, General information Field of application: Construction Weights Empty weight: 2.800 kg Functional Generator capacity: 30 kVA Dimensions of cargo space: 210 x 115 x 170 cm CE mark: yes Other information Generator: Stamford Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 100 l Additional information Please contact Team DPX for more information Fpodpfjuidyijx Ap Don = Additional options and accessories = - Battery - Control Panel - Tank

Condition: used, empty load weight: 6,950 kg, maximum load weight: 30,050 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 02/1998, suspension: air, tire size: 385/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, BPW axles, air suspension, 1st axle liftable, last axle with self-steering, ABS (anti-lock braking system), container locking, underbody protection, supports, storage box. Construction: Swap body semi-trailer for 20/2x20/30 and 40-foot containers, 3x BPW axles, drum brakes! 1st axle liftable, 3rd axle with self-steering! Spare wheel available for an additional charge! ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors. - . Fpodpfx Asz Ehwiep Den

Year of construction: 2026, condition: new, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Fjdpefir Srofx Ap Depn

Year of construction: 2026, condition: new, functionality: fully functional, Titus™ is the smallest, lightest and easiest to integrate laser marking head in the world. Because this is precisely the reason why Titus™ ("tiny tubus") is so great, the world's smallest laser marking head will remain small. After all, it makes a big impact wherever production environments are limited: with Titus™, the new 20 W and 30 W fiber laser markers Y.0200-xs and Y.0300-xs are not only incredibly small, but also incredibly easy to integrate. This opens up new areas of application for fast direct part marking with lasers, particularly for the automotive, aerospace and electronics industries. Thanks to the high integration flexibility, high throughput and significant savings potential in terms of operating costs, Titus™ customers can finally fully exploit their marking potential. Fpsdot E I Ecepfx Ap Dsn Think small. Achieve bigger. Main application areas Electronics industry, automotive engineering, automotive supply industry, integrators, plastics and metalworking industries, machine and tool construction, marking at a standstill or in motion

Condition: used, Year of construction: 2005, operating hours: 20,098 h, Type of fuel: Electric Colour: Grey Empty weight: 5.120 kg Dimensions (LxBxH): 242 x 130 x 239 cm Lifting capacity: 3.000 kg Lift height: 360 cm Fork dimensions: 1.070 x 990 mm - Year: 2005 - Documentation available: Yes - CE marking present: Yes - Serial number: 516045005907 - Operating hours: 20098 - Lifting capacity: 3000kg - Lifting height: 3600mm - Overhead clearance: 2390mm - Free lift: 0mm - Fork length: 1070mm - Maximum fork width: 990mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Radio, Full cabin, Work lights - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 5 PzS 775 - └ Battery year of construction: 2017 - └ Capacity: 775Ah - └ Battery voltage: 80V - Transport dimensions: 2426mm x 1300mm x 2390mm (l x w x h) - Transport weight [kg]: 5120kg - Transport packages [pcs.]: 1 Financial information Fpedoyvf E Aspfx Ap Dsn VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: excellent (used), mileage: 30,191 km, color: white, lifting height: 30,000 mm, Year of construction: 2006, operating hours: 1,136 h, Drivetrain Drive: Wheel Weights Empty weight: 7.450 kg Functional Lifting capacity: 1.300 kg Dimensions of cargo space: 860 x 230 x 320 cm Fpsdpfxoyi Hdge Ap Den CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 350 kg Delivery terms: EXW Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Klaas K 25-30 TS * 2006 * Diesel drive * 1136 working hours * Equipped with a man basket * Refurbished remote control * 30-meter working height * 25-meter horizontal reach * 1300 kg lifting capacity * 30,191 km * 7,450 kg net weight