Used Mosca Strapping Machine, Mosca, Ro-Tr700-4 for sale (1,04,135)

Condition: used, Year of construction: 2001, 150 kg Ppjdpfey Ihbfox Antjt weight ca. 70 kg dimensions ca. 940 x 500 x 800 mm SEMI-AUTOMATIC Continuously adjustable strap tension: 5–500 N Up to 15 strapping cycles per minute Strapping triggered automatically when the strap is inserted or via foot pedal Heat-sealed closure Load capacity: 150 kg Minimum product dimensions (W x H): 45 × 20 mm Height-adjustable · Ergonomic operation Clear control panel, · Easy operation from both sides No protruding controls · Strap tension adjustable via the keypad Finely adjustable strap tension from 5–500 N Strap widths 6, 9, 12 mm · Versatile application Easy access · Tape spool can be replaced quickly and easily The drive motor runs only during the strapping process · Energy-saving

Condition: used, Year of construction: 2016, Folding machine Psdpfx Anjyr Nypjtspt MBO K8 S-KTL/4 Year: 2016 Description: - 16 page folder - Colour monitor with touch screen - Semi automatic setting Feeder - Pallet feeder: K8-FP120 - Counter - Pump Folding unit MBO K8 S-KTL/4-FP120 - Parallel fold unit with 4 buckle plates: 66cm - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hood over the entire folding section Delivery Palamides Delta 502 Year: 2007 - Vertical stack delivery with pressing - Banding device(s): 2 MBO K8 - 380 volts - 3 phase Palamides Delta 502 - 220 volts - 3 phase Infeed width: 17 -78 cm Infeed length: 25 - 120 cm Max. mechanical speed: 10 - 230 mtr/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2008, functionality: fully functional, Automatic Vertical Strapping Machine VR 88 Year of manufacture: 2008 Machine type: VR88 Machine number: 3177 The automatic vertical strapping machine VR 88 is ideally suited for strapping pallets. It is suitable for integration into both powered and non-powered conveyor systems. The lower lance enables the strap to be fed through the pallet. During tensioning, the strapping head moves horizontally to compensate for tolerances, ensuring consistent strap tension and high stability. The system control program allows for single or multiple strapping cycles, depending on the specific packaging requirements of the customer. The machine has been fully overhauled by us and is in fully functional condition. Technical Data Power supply: 230 V / 400 V / 3 Ph / 50 Hz Power consumption: 3 kW Strap types: PP or PET Strap width: 12 mm Strap thickness: 0.6 – 1.0 mm Strap tension: up to 200 kg (optionally up to 500 kg) Seal type: Hot-wedge welding Sealing time: approx. 1 – 3 s, depending on strap type Strap feed speed: 2.5 – 5.5 m/s Strap retraction speed: 2.5 – 5.5 m/s Strap tensioning speed: approx. 0.25 m/s Ppedpsx Ta Sasfx Antst Strap dispenser: 405 mm core Strap frame: 1,200 × 1,600 mm (can be rebuilt for a clearance height of 2500 mm) When installed at the customer site, a 6-month warranty is available.

Condition: used, functionality: fully functional, machine/vehicle number: N/A, The GH-4 type shot blasting machine is primarily recommended for surface cleaning and treatment of cast, forged, and pressed parts in bulk using shot blasting. Blasting chamber dimensions: Rubber belt width: 1,300 mm Belt disc diameter: 1,150 mm Pjdpfjy Nbm Dox Antjpt Max. workpiece load weight: 800 kg Shot charge: 800 kg Blasting heads: Number of blasting heads: 2 pcs Drive motor power: 11 kW Power requirements: Electric: 27.5 kW Compressed air pressure: 6 bar Quantity: 6 m3/h Dust extraction fan capacity: 5,500 m3/h Our equipment is fully refurbished and offered for sale in like-new condition. Directly from the manufacturer! We can assist with transport and assembly upon request.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VKE / FLPS2 – 4APC/S, type of input current: three-phase, Automatic Vertical Strapping Machine VKE / FLPS2 – 4APC/S Current Status & Availability: The strapping system is fully operational and is currently still in daily use. Availability: The entire system is currently fully integrated into the production process and can be inspected under operating conditions after prior arrangement. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47 / 2026. Technical Data: Pallet Types: Pallet width 500 to 1000 mm Pallet length 600 to 1200 mm Package height (incl. pallet) min. 500 - max. 2000 mm Conveyor height 500 mm Weight (incl. pallet) 150 to 1000 kg Package stacking method: automatic Under-stretching: no Conveyor speed: 12 m / min Pallet transport direction: lengthwise onto lengthwise boards Centering accuracy: centered on the stop light barrier Machine Components: Pneumatics: Festo Gear motors: SEW Psdpoy Szflefx Antjpt Control system: PLC S7-200 Control cabinet: Rittal Protection class: IP 55 Main switch: Möller Fuses: Siemens Relays: Omron Push buttons: Siemens Signal lights: Telemecanique Light sensors / light barriers: Datalogic Inductive proximity sensors: Omron / Siemens Cam switches: Siemens Contactors: Telemecanique

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, Transpak TP 702 strapping machine, arch 550 x 400, 5 mm strapping, automatic strapping feeding and ejection, adjustable tightening tension via potentiometer, speed of 55 cycles per minute. 4 machines available. Price decreases with quantity. Psdpfxoy Uiwze Antspt

Condition: used, Year of construction: 2023, operating hours: 810 h, machine/vehicle number: 22-2261, overall weight: 97,500 kg, feed force X-axis: 2,750 N, feed force Z-axis: 3,500 N, input voltage: 380 V, Information will follow shortly. Pedpfey A Sccex Antjpt

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,870 mm, travel distance Y-axis: 1,840 mm, travel distance Z-axis: 250 mm, number of axes: 4, number of slots in tool magazine: 24, controller manufacturer: TPA Albatros, table length: 4,200 mm, table width: 1,300 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, 4-Axis CNC Machining Center – UNITEAM SPRINT 4012-M Highly comprehensive configuration, suitable for the production of furniture, doors, and windows Year of manufacture: 2003 Machine conforms to CE standards No. of controlled axes: 4 Axis strokes: X 4870 mm – Y 1840 mm – Z 250 mm – C 360° (for angular head management) Max axis speeds: X 85 m/min – Y 85 m/min – Z 25 m/min Working area: 4200 x 1300 mm No. 6 vacuum bars with 3 suction cups each No. 4 panel lifting bars No. 6+2 reference stops No. 6 disengageable clamps Vacuum pump: 100 m³/h Laser pointer Electrospindle: 9 kW (12 HP) – max speed 18,000 rpm – HSK63F interface Dual automatic tool changers (8 positions on head + 15 positions on Y axis) HSK63F angular head with variable tilt Ppodsy Samhopfx Antst Independent angular head, point-blade, with pneumatic tilt 0/8° – 3 kW (4 HP) motor Independent horizontal motor, 5.6 kW (7.6 HP) – max speed 18,000 rpm Drilling unit with 14 vertical spindles – 2+2 and 1+1 horizontal – 3 kW (4 HP) motor No. 2 HSK63F tool holders included TPA Albatros CNC control (updated in 2018) with remote pushbutton panel Automatic centralized lubrication Front sensitive safety mats + full perimeter metal fencing User manuals + electrical schematic + CE certificate Installed machine footprint: 7500 x 3800 x 2350h mm Total transport dimensions: 13,500 x 2,400 x 2,400h mm Total weight: 5,000 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 103825, type of input current: AC, For sale: fully operational Mosca SoniXs MP-6 T from 2012. Price negotiable. Contact via email or phone. Ppodpfx Ansy Sld Eotot

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 1400040505, 4-axis workingcenter usefull length: 7.6 m 12 pneumatic clamps 2 working zones Podjy R R Iyjpfx Antspt

Condition: good (used), functionality: fully functional, Year of construction: 2005, It is important to know that a total of two welding machines and two CNC corner cleaning machines are available, comprising two complete production lines. The machines are operational and still in daily use. CE Conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Current connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic press units - Electronic temperature control - Central control unit - Safety light curtain Operation Profile clamping – Insertion of the heated welding plate – PVC melting – Application of welding pressure – Welding cooling – Removal frame The system operates semi-automatically/automatically. Ppedpeyyavrjfx Antst ``` Includes: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Operator panel and industrial PC Control system Industrial PC control Safety system - Light curtain - Emergency stop button - Safety covers - CE conformity Powered up in Hungary, the system can be dismantled and delivered in approximately June.

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. steel cylinder 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. Ppsdsvxd Ttspfx Antst 4 motors total power 96kW Condition very good ! Available immediately.

Condition: excellent (used), functionality: fully functional, COPY SHAPER and SANDER machine , automatic , model BALESTRINI CP 90 - 4 second hand machine working condition : Excellent Psdpfxsx A Hatj Antept CE mark : YES with accident prevention cabin as shown in the photo machine composed by n.04 working units : 1+1 shaping units . motor power Hp 10 each one 1+1 shaping / sanding units . motor power each one Hp 4,5 / 6 ( 2 speeds ) max. working width mm.500 max. workinh heigth mm.180 max. working length mm.2500 hydraulic carriage . pump motor power Hp 5,5 adjustable hydraulic carriage advance speed: 1:18 m/min. hydraulic carriage return speed: 75 m/min. volt. 380/50

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm • Working height up to 120 mm • Min. Working height 6 mm • Spindle speed: 6000 rpm Ppodpfx Ansxxkt Aetot • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 302/07, Optical Sorting Machine DIMAC MCV 4 Operational. Condition: very good, operational Ready for immediate delivery Machinery runs without any problems. Technical information: Crack control: MARPOSS 2 telecentric front cameras Ppedpfx Aney Nx I Estjt 1 top camera Dimensional control with dual indexed movement (allows increased speed with 360° part control) Choose parts from M4x20 to M14x80 New PC with updated software.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: Feeders: KR497BW Conveyor: KR314-6 KR840RF Infeed Roller KR519F50 Vacuum Firejet, overall weight: 600 kg, type of input current: AC, input voltage: 230 V, input current: 230 A, total width: 820 mm, total length: 3,430 mm, total height: 845 mm, input frequency: 5,060 Hz, This envelope printer is for sale from the factory its in excellent working condition, ready to work, if necessary we can arrange try out on a scheduled meeting in Hungary, or we can do an online show off. Pjdpsxzfq Uefx Antjpt

Condition: used, Year of construction: 1985, functionality: unexamined, -WKG 1021- A Titan strapping machine is being offered here. The functionality cannot be tested, therefore it is sold to hobbyists or for spare parts only. The dimensions of the strapping machine can be seen in the pictures. The machine manual and operating instructions are available. Technical data: Manufacturer: Titan Model: VK 10 Pjdpfey Nav Rjx Antspt Year of manufacture: 1985 Rated current: 2.5 A Rated voltage: 380 V / 50 Hz Max. packaging size: 1200 x 600 mm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, The fully automatic Strapex SMG 25 strapping machine was manufactured in 2022 and features an arch size of 1650 x 500 mm. It processes straps with a width of 12 mm. Activation can be performed via the additional foot switch or the integrated foot switch on the machine. Strap tension is adjustable up to approximately 450N. With height-adjustable feet, the working height can be comfortably set between 720 and 950 mm. Included is an additional roll of PP strap. The original price is approximately €19,500. The device has been function-tested and comes with an electrical safety check conducted by a certified electrical company. Loading by forklift is possible. Net price: €11,000 negotiable Price is subject to 19% VAT. Ppedpfjyuqnaex Antjt Cash payment on collection is possible.

Year of construction: 2005, condition: used, CNC Machining Center 4 Axes – FOM (Aluminium/Steel Profiles) Configuration: 4-axis CNC Working length (X): 7,030 mm Condition: Working, maintained - Main Features Podpfx Anjywhf Njtopt CNC machining center designed for drilling and milling operations on aluminium and steel profiles, ideal for window and industrial profile production. 4-axis spindle (0° / 90° / 180°) for multi-side machining Electrospindle 4 kW – up to 12,000 rpm Tool holder: ISO 30 DIN 69871 6-position automatic tool magazine 6 pneumatic clamps (manual positioning) THK linear guides for high precision - Control & Software Software: FomCam + Prof2 (Windows XP) Easy programming with automatic CNC generation Movable control console (PC + display + keyboard) Barcode reader connection Remote control capability 📏 Technical Data X-axis: 7,030 mm Y-axis: 1,100 mm Z-axis: 425 mm Machine dimensions: 8,307 x 1,875 x 2,460 mm Weight: 3,200 kg - Equipment Forced air spindle cooling Inverter-controlled spindle Automatic lubrication Protected tool magazine with rotary system - Machine ready to work, ideal for aluminium profile machining and window production.

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Ppjdpjiv Imnofx Antjt Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: used, Year of construction: 2014, Folding machine MBO T700/4 Year: 2014 Description: - 4 page folder - MBO Navigator Feeder - Round pile feeder: R 700 - Pump Buckle folding unit: 1 MBO FP 10 - Automatic buckle plate adjustment - First buckle folding section with 4 buckle plates - Slitter shaft cassette - Perforating shaft - Anti noise hood(s) Podpfx Ansyzdt Djtspt - Excluding delivery Max. mechanical speed: 30 - 230 m/min Maximum size range: 68 x 120 cm Minimum size range: 15 x 20 cm

Condition: excellent (used), Model: JK-2 Power supply: 230 V Ppodjyubk Ejpfx Antjt Number of phases: 1 Frequency: 50 / 60 Hz Power: 0.56 kVA

Condition: excellent (used), Year of construction: 1997, Manufacturer: Brüninghaus Verpackungssysteme GmbH & Co. KG Ppsdjyubh Dspfx Antjt Year of manufacture: 1997 Machine serial number: 1390542 Model: SKL-90

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Automatic strapping machine Mosca ROM P5, arch 500 x 400 or 600 x 500 mm, 5 mm strap, automatic strap threading and ejection, adjustable tension via potentiometer, cycle rate 50 to 55 cycles per minute. Several machines available. Podpfsy N Rr Aox Antjpt

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, automatic strapping machine Transpak TP 702, year 2018, 12 mm strap, arch 850 x 600 mm, capacity 50 to 55 cycles per minute, automatic strap feeding and ejection, tension adjustable via potentiometer. Pedpjytr Ncofx Antjpt