Used Mwm Gmbh Tcg 2016 V8C for sale (69,424)

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. Hsdoff Huwspfx Ag Sofn • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing) Hfodpfx Agjt U Uiae Son

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Hfodpfx Ajyc U Dbog Son Weight: approx. 40 kg Displacement resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Load cell: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: ready for operation (used), Year of construction: 2000, There are 13 LTA Type IR dust extraction systems available. They are from various production years (1997-2001), but are all the same type. The systems will be dismantled in week 35 and will then be available for delivery. The ionizer and collector will be cleaned in an ultrasonic bath, and the housing will be wiped down. More systems will become available in the coming months. Hfodezv Ttaspfx Ag Ssn 20 x LTA AC3001 R, production years 2004-2011.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Hodpfxezw T Due Ag Ssfn Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Hfedpfx Agezw Ucxe Son Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Hfsdpfszw Ug Rsx Ag Sjn Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Special equipment: automatic oil skimmer Technical data Heatable for aqueous cleaning agents. For the removal of oil and grease contamination in the shortest possible time. Universally applicable for the fully automatic cleaning of small parts from production, manufacturing, and maintenance, such as bolts, sleeves, and ball bearings. 2129905 Easy operation thanks to the fully automatic cleaning process. This allows skilled workers to concentrate on other important tasks. The washing tank is filled with a mixture of water and a water-soluble IBS special cleaner (washing solution). The contaminated parts to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the device is switched on, and the solution in the tank is heated. Hfjdpfozwb Eaex Ag Ssn In the closed device, the basket rotates around its own axis at a constant speed. The pump unit draws the washing solution from the washing tank and pumps it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The parts to be cleaned are intensively blasted with the hot solution from all sides during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the device switches off automatically. ∙∙ 1 pump arranged vertically ∙∙ 3 three-dimensional nozzle tubes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel (Ø 170 mm) ∙∙ rotating washing basket made of stainless steel, gear rim drive via separate motor ∙∙ intake filter in front of the pump shaft ∙∙ high spray pressure ∙∙ fume extraction ∙∙ stainless steel sieve plate with filter basket ∙∙ low water level protection W x D x H (closed): 1130 x 1010 x 1150 mm W x D x H (open): 1130 x 1220 x 1730 mm Usable height: 500 mm Load capacity: 150 kg Basket diameter: 780 mm Washing tank capacity: 85 liters Pump pressure: 3.1 bar Spray rate: 4800 L/h Power consumption: 4.8 kW / 400 V / 50 Hz Weight: 90 kg Temperature: 0-60°C

Year of construction: 2026, operating hours: 1 h, condition: new, machine/vehicle number: H10TM, Universal testing machine H10TM Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 84 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option to control and evaluate the test using the basic software. Hsdpfezuma Rsx Ag Sofn This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Load cells: 5N-10N-20N-50N-100N-200N-500N-1kN-2kN-3kN-5kN-10kN - Grips: Compression platens, bending fixtures, shear fixtures, wedge grips, scissor grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive Hfodpfxozt Ip Rj Ag Ssn onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Year of construction: 1995, condition: used, Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - Insulated and clad - Stand frame, short - Cleaning air fitting with safety valve Additional title: Refrigerated stainless steel tanks for outdoor installation Capacity: 74480 l Operating pressure: 0,9 bar Width: 12,55 m Height: 3,27 m Hedpfx Agezgcvle Sofn Material: Stainless steel Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip with steel lid, 3000 x 2000 x 1250 mm Product description: For sale is a skip with a steel lid, 3000 x 2000 x 1250 mm, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: - Base: 3 mm - Sides: 3 mm Hfedezq E R Tepfx Ag Sen - Steel lid: 2 mm - Frame, C-profile: 80 x 50 x 4 - Fasteners for transport, made of 6 mm sheet metal - Drain valve in the base of the container - Transport with a forklift is possible along and across the container - Transport with a crane is possible - Warning stickers: white and red - The entire range of RAL colors is available - Interior and exterior: zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: - Robust construction for heavy materials - Easy handling thanks to sturdy hinges - Stackable - Weather-resistant due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system Hsdpszntfmefx Ag Ssfn - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Hedpfx Agonxk Ixo Ssfn

Condition: ready for operation (used), Year of construction: 2019, fting height: 3000mm, rated load capacity: 7t, load center: 600mm, weight: 11,29t, operating hours: approx. 3000h, with 360° rotator and air conditioning, the rear axle is defective (mounting pin and wheel hub). An on-site inspection is possible. Hfjdpfx Agozuktbo Son

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. Hedex Sq I Njpfx Ag Ssfn The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM10 Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Hfsdpsd R Dpmsfx Ag Sjn Weight: approx. 85 kg Resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 10 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option of control and evaluation with the basic software. This allows you to generate different test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM3 Hfjdpfxsd R Dpus Ag Sen Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a keypad, allowing for a “quick test” even without a PC. For tests that require data storage and a record of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Hfsdpfeuz Hmxex Ag Sen ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, air demand: 7.08 m³/h, year of last overhaul: 2025, air pressure: 87 bar, film width: 360 mm, product height (max.): 430 mm, product height (min.): 110 mm, product length (max.): 600 mm, product length (min.): 300 mm, The SAVOYE INTELIS packing machine is a fully automatic packaging line designed for packing products in corrugated cardboard boxes. The unit was manufactured in France in 2016 and features a modular plug & play architecture, enabling quick assembly, disassembly and adaptation of the process to current logistics requirements. This machine is suitable for medium to large distribution centers, e-commerce operations, contract logistics providers, and manufacturing plants. Its capacity is up to 840 cartons/hour, with a maximum single package weight of up to 32 kg. The packaging line consists of the following components (as per documentation): INTELIS F12 – Carton erector – automatic forming of boxes from corrugated board. INTELIS T18 – Shrink tunnel – carton and film stabilization through thermal shrinkage. INTELIS C12 – Carton closer – lid application and final closing of the carton. NORDSON PROBLUE – Glue application system – professional glue applicator for packaging. Key features: - Fully automated packing cycle. Hfedox Uphgjpfx Ag Ssn - Forming, shrinking, closing, and preparing parcels for shipment. - Stable and energy-efficient transport system – conveyors with integrated roller drives. - Intelligent speed and load adjustment. - ECO mode with regenerative braking energy recovery. Technical specifications: PLC: TSXP572634M Throughput: 840 cartons/hour Carton dimensions: • min. 300 × 200 × 110 mm • max. 600 × 400 × 430 mm Max. package weight: 32 kg Power: 5 kVA Power supply: 3-phase 400 V

Condition: new, Electrically Heated 545L Stainless Steel Agitated Tank Type: EBB500RWP Includes operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in different sizes. Volume: 545L Dimensions approx.: Ø 950mm x cylindrical height 880mm Total height: 1120mm plus agitator motor Material: 1.4301 / AISI304 stainless steel Surface finish: Internal and external IIIc/2B Hfedpfx Aow Dy Ddjg Ssn Internal weld seams ground Max. operating temperature: 110°C Max. operating pressure: ATM - Vertical design on four legs with forklift tunnel - Top: Hinged lid, central crossbeam with two hinged lid halves - Bottom: Flat bottom with side outlet DN50 DIN11851 and disk valve - 2x side handles - 1x nameplate Propeller agitator for low-viscosity media Power: 0.75KW Speed: 1410RPM Operating voltage: 3PH 400V

Condition: new, Factory-new stainless steel agitator tank with propeller agitator Type: CILC100BRWP Volume: 109L Design: Vertical construction on legs Version: Single-walled Product-contact material: 1.4301 stainless steel Surface: Satin-finished exterior, interior BA finish Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Hinged lid, half bolted, half foldable Bottom: Conical bottom with forward-extended DN25 pipework, DIN11851 Tank dimensions: Tank diameter: 477mm Overall height: 930mm (plus agitator motor) Cylindrical height: 600mm Leg height: 330mm Equipment: - Hinged lid with stainless steel sheet grate as reach-in protection, bolted, removable - Hold function for hinged lid - 1x DN25 discharge ball valve, DIN11851 Agitator: Propeller agitator Brand: Schwarzer Rührtechnik GmbH Type: SRT4-1000 Power: 0.25kW Speed: 980 RPM Hfjdsw Dy H Sopfx Ag Sjn Operating voltage: 3PH 400V Product-contact material: 1.4301 stainless steel - Heavy-duty agitator shaft mounted to agitator motor, non-removable - Shaft balanced for concentricity within speed range - 1 piece 3-blade mixing propeller Ø125mm screwed onto end of agitator shaft - Stainless steel flange with V-ring seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, emergency stop, phase inverter, no-voltage release

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Hfodefhbuyspfx Ag Ssn - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: as good as new (ex-display), Year of construction: 2021, - Mobile scissor lift table with a single-scissor mechanism - With a smooth metal sheet platform, WITHOUT a sliding bar - The lifting mechanism (up/down) is operated via a hydraulic foot pump - Load capacity: 1200 kg - Overall height: 450 mm - Lifting height: 700 mm Hjdpfx Agjfnnays Sjfn - Maximum height: 1150 mm - Platform size: 2000 mm x 1000 mm - Weight: 420 kg - 2 swivel casters with brakes, 2 fixed casters without brakes - Wheel diameter: 150 mm - Powder-coated finish: base frame and platform frame in light gray RAL 7035, scissors in violet-blue RAL 5000

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 Hedpfsiw Eafjx Ag Sjfn - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003