Used Peltzer-Ehlers Thread Rolling Machine - Flat Die for sale (72,360)

Condition: used, Year of construction: 2002, Roll production line König Mini Rex G2000 Year of manufacture: 2002 Compact system G2000 with Mini Rex 4000 forming machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces Blsdpfoz A Sfxjx Af Aen For higher output without proofing cabinet operation, Mini Rex, swiveling, up to a maximum of 4,000 pieces/hour Weight range: 35-85 g Die size: SK63 and RK58 Dies for round and square rolls Lateral discharge conveyor Proofing time approx. 6 minutes at an output of 2,000 pieces/hour Dough divider included, with one dough dividing tool of your choice, subject to availability Integrated impact roller for shaping

Condition: used, Year of construction: 2002, Roll production line König Mini Rex G2000 Year of manufacture: 2002 Compact system G2000 with Mini Rex 4000 forming machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex, swiveling, up to a maximum of 4,000 pieces/hour Weight range: 35-85 g Die size: SK63 and RK58 Blsdpfx Afjz A Si Ro Asn Dies for round and square rolls Lateral discharge conveyor Proofing time approx. 6 minutes at an output of 2,000 pieces/hour Dough divider included, with one dough dividing tool of your choice, subject to availability Integrated impact roller for shaping

Condition: good (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: SY 330 -075, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Akyapak, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 330 mm, overall weight: 9,100 kg, total length: 4,585 mm, total width: 1,610 mm, total height: 1,840 mm, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, The sale includes a 2-meter longitudinal welding station equipped with an Oerlikon MIG 500 A welding unit, with all equipment in full working order. Also included are a lifting table for material handling to the plate rolling machine and a work platform. The plate rolling machine is in good condition and can be put into production immediately. The machine is currently operational, and inspection and test runs can be arranged upon request. With the inclusion of the longitudinal welding station, this package provides a complete solution for manufacturing tubes and special pipe sections to customer-specified diameters, with lengths of up to 2 meters. Bodpjzzdahjfx Af Ajln

Condition: used, Year of construction: 2008, Roll production line König Mini Rex G2000 Year of manufacture: 2008 Compact system G2000 with Mini Rex Futura heading machine Compact proofing cabinet with an hourly output of approx. 2,500 pieces For higher output without proofing cabinet operation, Mini Rex, swiveling, up to max. 4,000 pieces/h Weight range: 35-85 g Die size: SKG58 and RK58 Bljdpfxoz A Eg No Af Aon Dies for round and square rolls Side discharge conveyor Proofing time approx. 6 minutes at an output of 2,000 pieces/h Docking device including one docking tool of your choice, subject to availability Integrated infeed conveyor

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Bjdpfx Aszrnxcef Asln Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration Bedpfxsz E A Nmo Af Aeln – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: excellent (used), 3-Roll Plate Bending Machine / Round Bending Machine Manufacturer: Nosstec, Sweden Type: 8266 15/40 Year of manufacture: 1998 Serial number: 3058 Working width: 1,540 mm Plate thickness: up to approx. 4 mm Rollers: 3 pieces, steel rollers Drive: motorized Operation: electric control with foot switch and mechanical hand adjustment Bsdpfx Afsz Agn De Aoln Weight: approx. 840 kg Documentation included Very good condition, fully functional.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch Bsdpfx Afszyz D Io Asln – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit Bjdpfjzqnxtox Af Aeln - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M08L/7516, Offer Number: M08L/7516 Machinetype: 4 die - 4 blow transfer header Make: PELTZER-EHLERS Type: GB1 Constr. year: 1970 diameter range: 12 mm number of dies: 4 number of stations: 5 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 125 press power: 65 to Bsdpfjwi S Tnox Af Asln Location: In our warehouse

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2022, We are offering this used KÖNIG ECO TWIN roll production line, manufactured in 2007. Model: ECO TWIN Type: 800-(DB800)-K6-SCHN6/B-(DA) Serial number: 07.0.0782 Year of manufacture: 2007 Bsdoznm S Hepfx Af Ajln Power: 8 kW Frequency: 50 Hz Rated voltage: 3 × 400 + N V Rated current: 15 A The system has been fitted with new belts and is in perfect, fully functional condition. It was used by us solely as a backup system and was therefore only used very rarely. We acquired and overhauled the system approximately two years ago. The system is immediately available and can be collected directly after arrangement. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2011, condition: used, 32 mm direkt Bledpfx Aewa Uf Uef Aen 1:1,25 angle adjustable from - to -20/ +20 Grad weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: Bledpfezt Nbzsx Af Ajn - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: good (used), functionality: fully functional, current model HG 36 Thread-cutting capacity in ST 60: M10 - M 36 Drill chuck taper: B24 Motor power: 3 kW Bodpfx Afez Ig Tns Aeln 6 speeds: 19 – 95 rpm

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Blsdpfx Afsz E Ra Hs Asn Max. Clamping Diameter: approx. 315 mm Power: 25 kW Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Description for posting on Machineseeker: Hydraulic die casting machine TECNOFOND MR 1600 R – fully functional, Siemens control system. For sale: hydraulic die casting machine TECNOFOND MR 1600 R, manufactured in 1999, made in Italy. The machine is in perfect working order, operates correctly, and is ready for continued production. The die casting machine was used in our foundry for the production of aluminum castings. The machine has been modernized – the control system has been replaced with a Siemens system. In addition, the set includes reducing plates, which allow the machine to be adapted to different die and mold dimensions. Technical data: - Manufacturer: TECNOFOND S.n.c. – Italy - Model: MR 1600 R - Year of manufacture: 1999 - Type: hydraulic die casting machine - Maximum working pressure: 60 bar - Control system: Siemens – after modernization - Additional equipment: reducing plates - Application: production of aluminum castings The machine is in good technical condition, is fully functional, and can be inspected during operation before purchase. Bodpfx Aoz Ey Hpef Aoln The sale is related to the modernization of the machine park and the reorganization of production.

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide). Bjdpfx Afjv Nzpgs Aoln

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm Bedpfx Afezxt Txo Aoln drive elektronisch zwei angetri

Condition: used, Year of construction: 1986, sheet width 2040 mm Bljdpey Ezzyofx Af Asn plate thickness 4,0 mm distance between columns 2100 mm roll diameter 150 mm total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, actuation type: electric, roller diameter: 90 mm, working width: 1,270 mm, sheet thickness (max.): 3 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, rotational speed (max.): 6 rpm, type of input current: three-phase, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, sheet metal roll bending machine BOLUK BM 1270 x 90 - 2.5 mm NEW! for sale. manufacturer: BOLUK 1270X90mm year of manufacture: 2024 Bending Length: 1270 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers Bedjxhub Aspfx Af Aoln - Wire grooves at the ends of the rollers (4/6/9) mm - Manually adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manually foldable end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 1850x700x1200 mm Weight 520 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans Bodpfjztwx Uex Af Ajln For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 6,0 mm distance between columns 2100 mm Bsdez Ek Aujpfx Af Asln roll diam. toproll 180 mm roll diam. bottom roll 160 mm weight of the machine ca. 2,4 t dimensions of the machine ca. 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device

Condition: new, Year of construction: 2027, Machine for grinding, satin finishing, or polishing flat parts and profiles (finishing profiles, transition profiles, expansion joints, skirting profiles, decorative profiles, stair and terrace profiles, tile trims, edge protection profiles, renovation profiles). Bedpfx Afsg D Rfms Aeln Benchtop polishing machine / automatic flat polishing machine for parts up to 3,000 mm in length (longer products available upon request). Equipped with one or two processing units. Base machine and control cabinet are new; processing units are used but fully refurbished with new motors. Further information available upon request.

Condition: good (used), Year of construction: 2019, Rollfix 700 automatic rolling machine Blodpfx Aoz Hv U Eef Ajn - used - year of manufacture 2019 - computer control with touchscreen - automatic flour dispenser - automatic dough rolling - production machine - inspected and cleaned - stainless steel construction and housings - collection from warehouse / transport option available - price on request

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,840 mm, total width: 4,200 mm, total length: 10,840 mm, overall weight: 73,500 kg, Oskar Frech GmbH & Co. KG Cold chamber die casting machine DAK 1600-133 and additional equipment The system is used for the production of die castings made of aluminum, magnesium, or copper alloys, which are manufactured using the cold chamber die casting process. Clamping force 16,000 kN Clamping stroke 1,200 mm Casting volume 3,014 – 12,057 cm³ Total weight of the system 73,500 kg Dimensions of the system Length 10,840 mm Width 4,200 mm Height 3,840 mm The system is equipped with the following additional units: Bedpoz Eblajfx Af Ajln Metering furnace, manufacturer Westomat, type 1700 S, capacity 1,700 kg Mold release spray system, manufacturer Gerlieva, type GS 1600/1800 T Metering furnace, manufacturer Meltec AVDF 1800/10 K, consisting of an aluminum melting furnace and a vacuum metering unit. The entire system is designed to allow fully automated operation for die casting of workpieces when used in conjunction with automation components. All necessary interfaces for communication and monitoring are available. Oskar Frech GmbH & Co. KG is one of the leading manufacturers of die casting machines worldwide. The DAK 1600-133 is the largest machine in the smallest series currently manufactured by Frech. Automation of the die casting system, manufacturer Frech, type DAK 1600-133, using an automation cell, manufacturer Reis. These units are primarily used for removing the workpieces produced by the DAK 1600-133 die casting machine.