Used Pfannenberg Vibration Warning Signal for sale (8,187)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) Knodpfsyug Hxsx Afdeb • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, mileage: 73,830 km, power: 53 kW (72.06 HP), first registration: 05/2022, fuel type: gasoline, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, electronic stability program (ESP), immobilizer system, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please do not hesitate to contact us by phone or email to arrange a viewing appointment. The vehicles are not always available on our premises. Kedpfx Afezz Uk Dedonb We are updating our fleet, and therefore 12 vehicles are currently available. Please send us an email or call us directly. Special features: Sound package, audio system: Multimedia Toyota Touch, Bluetooth hands-free system, USB interface, smartphone integration x-connect (Apple CarPlay and Android Auto), multimedia display (7.0 inches) Additional features: 3rd brake light, passenger airbag can be deactivated, driver/passenger airbag, active headrests in the front, audio controls on the steering wheel, automatic lighting function (follow me home, FMH), exterior mirrors electrically adjustable and heated, turn signal integrated into exterior mirror, roof antenna, electronic brake force distribution, driving assistance system: eco display for fuel-efficient driving, driving assistance system: Toyota Connect safety system with automatic emergency call (eCall), hands-free system with audio mute and voice control, luggage compartment cover/roller blind, speed limiter, interior filter: dust and pollen filter with activated carbon filter, Isofix child seat system, body: 5-door, headrests in the front and rear adjustable, steering column (steering wheel) adjustable, reading light, engine 1.0 L - 53 kW catalytic converter, parking brake electric (EPB), tire repair kit, rear seat split, rear seat foldable, low emissions according to Euro 6d emission standard, windshield wipers with intermittent function, side airbags in the rear, side airbags in the front, service system: MyT-Connected Services, front left seat height adjustable, Toyota Safety Sense, warning system for rear seat belts, warning system for front seat belts The vehicle is located in our external storage facility; please contact us to arrange a viewing. Thank you very much! Subject to price changes, typographical errors and errors, and prior sale.

Condition: used, mileage: 2,72,000 km, power: 120 kW (163.15 HP), first registration: 03/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: 2nd battery (auxiliary battery) in engine compartment, storage compartment in the headliner of the cab, airbag on the passenger side, hill start assist, 13-pin trailer socket, audio system: MB audio system radio with USB and Bluetooth hands-free system, ceiling light in the cargo area with door contact switch, grab handle on the rear pillar on the left, grab handle on the rear pillar on the right, tachograph control located at the front under the headliner, digital tachograph, downloadable, suspension: stabilization level II, vehicle without lowered suspension, gearbox lock for auxiliary drive, cup holder at the front, grab handles on the A-pillars, additional main key, rear door (opening angle 270 degrees), connection strip for electrical connections (driver's seat box), fuel tank: main tank 93 liters, cargo area light LED, marker lights on the sides, auxiliary drive 2 B with reduction gear, configurable special module, cross member with integrated step, smoker's package, spare wheel with driving tires, spare wheel holder under the end of the frame including jack, reversing warning system (audible warning signal outside), safety belt system with warning system (passenger side), seats in the cab: double passenger seat, seats in the cab: driver's comfort seat, socket (12V connection) in the cab, battery isolation relay with additional battery, USB connection in the center under the dashboard (charging function only), fleece battery 92 Ah, reinforced front axle, jack Kedpfx Afjza Nhvjdonb Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag on the driver's side, traction control system (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, brake assist, headlining in the cab, automatic activation of driving lights, grab handle for sliding door on the cargo area partition, electronic brake force distribution (EBV), driver assistance system: crosswind assist, body/structure: high-roof box van standard, keyless start, child lock, communication module (LTE) for digital services, continuous cargo area partition, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 liters - 120 kW CDI catalytic converter, wheelbase 3665 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment on the right, safety belt system with warning system (driver's side), seat cover/upholstery: fabric, maintenance interval display Assyst, heat-insulating glass, permissible total weight 3.50 t

Condition: used, mileage: 1,31,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: * Total tank volume 9770L, diameter 1600 mm * Hydraulically fully opening bottom flap with hydraulically actuated central locking * Separation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/Sludge 6880L * Position 2: Water chamber 4360/Sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m HD hose DN25 with automatic hose guide Knedpfx Aezz Tz Ijfdsb * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun * Cassette deck for storing the suction hose DN125 * HD pump Uraca KD718 G60 with 648 l/h * Vacuum pump Kaiser VPC 60 with 1625 l/h * Total operating hours of the vehicle: 8118 h * Hand washbasin * Cable winch, hydraulically operated, mounted on swiveling reel * Control panel on the right at the rear of the vehicle * Control panel on the swiveling reel * Operation also possible via radio remote control * Vehicle with radio remote control * Axle load, front axle: 8.0 t * Trailer socket 12V / 13-pin * Audio system: CD radio (Bluetooth) * Exhaust pipe extended behind the cab * Battery 220 Ah * Compressed air connection in the cab * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Cab: steel-sprung, comfort * Suspension: front springs 8.0 t, 2 leaves * Transmission: 12-speed - Type: G 330-12 * Rear axle: differential gear 300 * Communication interface * Fenders, 3-piece * Engine compartment encapsulation, reinforced * Tag axle, steered, liftable * Auxiliary drive MB 123-10c * Parameterizable special module * Reversing warning, acoustic (warning signal externally) * Rear cross member, reinforced * Circuit breaker * Seats in the cab: driver's seat, sprung comfort seat * Sun visor, exterior * Sunblind, side window, driver's door * 12V socket in the front passenger footwell * 24V / 25 A socket in the front passenger footwell * Rotating beacon * Two-plate clutch * Oil cooler, transmission Additional equipment: * Emission standard EURO 6 * Axle configuration: 6x2 * Trailer brake, 2-line * Connections on the left, trailer socket 24V / 15-pin * Antos * Exterior mirrors, electrically adjustable and heated * Differential lock, rear axle * ClassicSpace * Stowage flap, exterior left * Cab floor with engine tunnel 320 mm * Cab: mounting height 420 mm * Suspension: leaf / air * Window lifts, electric * Windshield, tinted * Generator 100 A * Transmission: 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Lift roof, manual (steel) * Info display 10.4 cm * Comfort locking system * Fuel tank: 290 liters, aluminum * Air intake from the front * Air compressor, 2-stage * Engine 10.7 L - 315 kW R6 Diesel (OM 470) * Tag axle, single-tired * Ramp mirrors * Waste heat utilization * Disc brakes, front and rear axle * Errors, changes and prior sale reserved.

Condition: used, This listing is for the Pendotech PMAT3 Pressure Mat Sensor Monitor The unit is in full working condition and is ready for immediate use The PendoTECH PressureMAT (PMA23/PMAT) is a dedicated pressure monitor, alarm, and transmitter designed specifically for use with PendoTECH’s single-use pressure sensors in biopharmaceutical and laboratory environments. Here's a breakdown of its key functions and features: What It Does Monitor: Displays real-time pressure readings (range from approximately –7 to 75 psi, or corresponding bar values) on a user-friendly backlit LCD for applications such as filtration, chromatography, and bioreactor pressure monitoring Knjdpfx Afjxhfq Isdob Alarm: Users can configure minimum and maximum pressure set-points. If readings fall outside these thresholds, the device triggers alarms—via on-screen warnings, audio alerts, and relay outputs to control external pumps or valves Transmitter: Delivers analog output signals (4–20 mA) and RS‑232 data outputs for integration into process control systems or PCs. Optional internal data logging may also be available Models & Capabilities Standard Units: Versions available for 1 to 4 pressure sensor inputs. High-Resolution (HR): Tailored for low-pressure applications, offering up to 10× better precision PLUS Series: More advanced models (e.g., PMAT2P, PMAT3P) support additional functionalities like flow meter inputs and total flow measurement, plus external analog input and broader integration options

Condition: ready for operation (used), Year of construction: 2024, Lease Return Mahr MarSurf XP 20 Professional CNC surface and contour measuring station – manufactured in 2024 Technical Data Manufacturer: Mahr Model: MarSurf XP 20 Professional – Series 1000 Year of Manufacture: 2024 Condition: Used Equipment MarSurf XP 20 Professional with LD control MarWin Professional Contour & Roughness Plus CNC-Plus Software QS-STAT Plus (Q-DAS interface) Industrial PC (Dell) with Windows 10 IoT Enterprise Feed unit MarSurf LD 130 Feed length: 130 mm Standard measuring stroke Z: 13 mm Probe arm changer for up to 10 probe arms 4-axis CNC workpiece positioning system Swivel axis ±135° Rotary axis ±170° Linear axis X: 400 mm Linear axis Y: 400 mm Positioning accuracy: approx. ±250 µm (X/Y/Z) Hard stone measuring plate with mechanical-pneumatic vibration isolation CNC measuring column 17" touchscreen Control cabinet Soundproofed protective enclosure Machine dimensions Enclosure (W × D × H): 1450 × 1300 × 2270 mm Accessories Adapter plate X/Y/Z offset Manual chuck DM28 Signal tower Probe arm set Additional probe arm 32 GB RAM Complete technical documentation (digital and in paper form) Description For sale is a high-quality CNC surface and contour measuring station from Mahr. The system is suitable for highly precise measuring tasks in industrial quality control and features extensive equipment with professional measuring and evaluation software as well as an automatic 4-axis positioning system. The system was delivered in 2024 and is in used condition. Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction. Knedpfezqzn Uex Afdjb

Condition: used, mileage: 50,324 km, power: 235 kW (319.51 HP), first registration: 08/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, ????? ONLY COMPLETE ????? ?????ONLY COMPLETE????? Kodpfx Afez Dcr Ssdsnb Vehicle No.: 254-26 Mercedes Benz 2632 Actros MP3 6x4 MULTISYSTEM: ROLL-OFF DUMP BED / CRANE / WINTER SERVICE SALT SPREADER Mounting plate SCHMIDT with hydraulic connections * First registration: 08/2013 * Original mileage 50,324 km * Wheelbase 4,500 mm * Front axle leaf spring suspension * Rear axle air suspension * Tire condition approx. 50-70% * EURO 5 - AdBlue * Reversing camera * Blind spot camera * Automatic transmission * German vehicle Roll-off dump bed: MEILLER RK 2067, built in 2013, max 20,000 kg, 300 bar CRANE / Roll-off container: MGK Type HLK 95a3, year of manufacture 2003, max 9.18 m = 960 kg / at 2.20 m = 4,200 kg Salt spreader / roll-off frame: KÜPPER WEISSER, Type IMSSF E35050DFA, year of manufacture 2015, KUBOTA engine Cover plate for brake discs, axle load front axle 9.0 t, battery 220 Ah, additional compressed air tank, electromagnetic viscous clutch for fan, noise reduction S-package for city use, urea tank (AdBlue): 95 liters, rear axle H 7, 13 t, bevel gear 300, fuel tank: 400 liters, air compressor 2-cylinder, fan high-speed belt drive, auxiliary drive MB 2C, programmable special module, pipe breakage protection brake system, rotating beacon left / right, reversing warning audible (warning signal outside), rear window, circuit breaker, seats in the cab: driver's seat sprung comfort seat, sun visor, cab socket 24V, oil cooler transmission Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2 - line, trailer coupling: towing coupling, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, roof hatch (steel), differential lock rear axle, cab: suspension for bad roads (6.0 Hz), cab: M (medium length), generator 80 A, interior filter: pollen filter, body / superstructure: chassis, model revision from 06/2008, engine 12.0 L - 235 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, disc brake front axle, disc brake rear axle, steel rims 9.00x22.5, Telligent - gear shifting, underrun protection front, preparation CB radio, preparation telephone / fax, front axle angled, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 26.0 t Inspection possible during our opening hours at any time, test drive by appointment! In the case of export sales, a deposit will be retained, which will be refunded after receipt of the certificate of conformity. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information without guarantee - Errors, changes, typing errors and prior sale reserved. Vehicle descriptions are explicitly not guaranteed properties. We refer to our general terms and conditions and ask that you take note of them.

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI Kodpfx Aoywuczjfdonb • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: used, Year of construction: 2012, Overview This RINK KM 690/4K empty bottle unscrewing machine, manufactured in , is designed for the automatic removal of screw caps from returnable empty bottles directly inside the crate. The machine is installed in the empty bottle infeed section and removes screw closures before the bottles are transported further towards the bottle washer. The machine is equipped with 4 units, each with 4 x 3 unscrewing heads, allowing multiple bottles to be processed in parallel inside the crate. In operation, the crates are transported continuously under the unscrewing sections. The head units lower cyclically onto the bottles, unscrew the closures and then return to the upper home position. The machine is operated via a Siemens SIMATIC Panel touch display integrated into the stainless steel control cabinet. Knsdpfx Afezcgppjdjb Technical Data - Manufacturer: RINK GmbH & Co. KG - Machine Type: Empty bottle unscrewing machine - Model / Type: KM 690/4K - Year of Manufacture: Application: Unscrewing / removal of screw caps from returnable empty bottles inside crates - Equipment: 4 units, each with 4 x 3 unscrewing heads - Operation: Automatic crate transport under cyclic lowering unscrewing units - HMI / Control: Siemens SIMATIC Panel touch display - Signal Tower: Red / orange / green status light - Safety: Stainless steel enclosure with transparent sliding doors and safety warning labels - Electrical Supply: 230 / 400 V, 50 Hz - Connected Load: 18 kVA - Current: 25 A - Condition: Used, installed in industrial returnable bottle line

Year of construction: 2024, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Kodpev Iqrbofx Afdjnb Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2460428, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, fuel type: electric, tire size: 0,41 x 0,13 m, color: red, Equipment: UVV, Manitou 100 VJR Telescopic Mast Lift Technical Specifications: * Working height: 9.90 m * Platform height: 7.90 m * Load capacity: 200 kg * Overall width: 0.99 m * Overall length: 2.82 m * Overall height: 1.99 m * Weight: 2,650 kg Equipment: * Proportional control joystick * Drive possible at maximum outreach * Audible warning signal and indicator light for tilt and overload * Integrated battery charger * Manual emergency lowering * Negative brake * Audible warning system in the work basket * Hour meter * Battery charge indicator * Crane lugs * Integrated diagnostics system * Non-marking tires * Work platform with anti-slip perforated floor * CAN-BUS technology * Toolbox in the work basket Optional features available: * New CE inspection (UVV) * Removal of our company decals * Custom paintwork and decals on request * New batteries * Warranty Ksdpszmf E Aofx Afdjnb * New service * Delivery within Germany

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: DEM120281014, overall weight: 80 kg, total length: 1,000 mm, total width: 400 mm, total height: 1,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, Schmalz VAGG 40 AC3 80 Vacuum Pump – 80 l tank, mobile, automatic ✅ Mobile on 4 wheels (easy integration) Knjdpozqvpyofx Afdob ✅ 80 l vacuum reservoir (stable pressure maintenance) ✅ Automatic control (-0.7 to -0.8 bar) ✅ Warning signal in case of underpressure/power failure ✅ Very good condition, few signs of use Ideal for CNC clamping technology, as well as for clamping and moving panels in carpentry or metal construction. Accessories for panel clamping are also available used upon request. The vacuum pump can be inspected and tested in Leinfelden-Echterdingen.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Year of manufacture: 2020 Operating hours: 12,019 Load capacity: 4,000 kg Mast type: H2 Free Lift Mast 1,688 mm Mast height H1: 2,600 mm Rated lift height H3: 5,380 mm Maximum mast height H4: 6,337 mm Vehicle width: 1,399 mm Mast type: Triple-stage mast Fork carriage: 6 rollers, 1,410 mm, type 3A Forks: 2 Tyres: Superelastic Cabin: Driver’s cab with protective roof, height approx. 2,334 mm Driver’s seat: MSG 75 Exclusive PLUS textile upholstery Hydraulic attachment: Double auxiliary hydraulics for DRF+ANB Hydraulic control: Mini-levers (2 levers) Drive control: Double pedal Electrical system: Prep. for data terminal 12V/10A Hydraulic accumulator in lifting circuit Tilt cylinders: 3/6 degrees Heater: Electric heater 1,500 W Reversing lights: LED, on driver protection structure, upper right Lighting: Special lighting package Searchlights: Special design, left & right Hour meter: Only driving and lifting motors Discharge indicator with lift cut-off Battery compartment for tray type 236 Interior mirror: Panoramic mirror Battery connector: 320 A, DIN 43589, Schaltbau, LV Reverse warning signal: STILL Safety Light, front & rear Paintwork: Orange / Silver metallic Labelling: German Knedsytta Aopfx Afdob Additional equipment: Customer-specific feature 1 Residual load capacity 1: 4,000 kg Main pump motor serial no.: JA200311191;563435 Battery make: Special Battery: 80 V special battery, type 236 Water refill system: Special water refill system 80 V Electrolyte circulation: For special battery 80 V Charger: D80/

Condition: used, first registration: 02/2019, Year of construction: 2019, Fixed trailer hitch Vehicle equipment – Basic equipment in conjunction with STVZO – According to EU Directives 2007/46 and 2002/24 – Classification according to N1 – With integrated platform body in the frame – Chassis made of aluminum ENAW-5754H111 – 10-year warranty on the entire frame – Driver’s cab with steel frame and plastic cladding – Door frames glazed with safety glass and ABS on both sides, opening forwards – Towing capacity with STVZO: 450 kg – Towing capacity without STVZO: 3000 kg – AC electric motor, 3-phase, 72V/10 kW continuous output – Peak power temporarily up to 15 kW – Max. torque 83 Nm – Acting on the rear axle – Curtis controller with vector algorithm, 300 A – Driving speed 40 km/h with STVZO, turning radius up to 60 km/h – Loading area: 2,400 x 1,100 mm without platform body – Loading edge height: 730 mm – Gradeability (laden) up to 15% Equipment: Kedpjy R Snhofx Afdjnb EQ 21 Double doors with ABS safety glass and sliding windows EQ 01 Electric heater (in conjunction with EQ03 Webasto heater) EQ 31 Side mirrors EQ 33 Three-point seat belts for both seats EQ 71 Integrated battery charger for lithium batteries EQ 74 Battery preheating system for lithium batteries Opt311 Two-stage drive select, individually programmable Opt521 Forward travel warning signal Opt522 Reverse warning signal EQ 67 Lithium iron phosphate batteries 12.8 kWh / 100 km OPT316 Electric power steering OPT611 Ball-type trailer hitch LR approved for 450 kg OPT631 Rear driver’s cab protector OPT639 Storage box behind the driver’s cab, accessible from both sides OPT718 Tires 165/70R13 M&S, price surcharge for standard tires OPT723 Set of 6 lashing rings in platform/load bed OPT912 LED beacon OPT913 Class 2 reflector stripes set for Germany (in conjunction with beacon / STVZO approval) OPT931 Radio and speakers AL16 Tipper platform L 2,200 mm with drop sides Body: Waste body in complete aluminum structure, laser cut, bent, and welded as a one-piece tub with two offset sliding doors, lockable – openable and loadable from both sides – complete frame welded with underbody – mounted on tipper platform and fixed with bolts – tiltable backwards over tipper platform – rear door for emptying – four loading eyes for mounting when empty We are pleased to offer you suitable financing, hire-purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of new equipment in stock as well as demonstration units. Please contact us! We rent vehicles with or without drivers as well as machines. A wide range of used machines and equipment is always available. Subject to technical modifications, errors, and prior sale. Further information Body: Platform body with sides Operating hours: 41

Condition: used, mileage: 1,24,100 km, power: 88 kW (119.65 HP), first registration: 11/2021, fuel type: electric, empty load weight: 2,365 kg, maximum load weight: 1,135 kg, overall weight: 3,500 kg, tire size: 215/75R16, wheelbase: 3,450 mm, fuel: electricity, energy efficiency: A, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,420 mm, total width: 2,050 mm, total height: 2,580 mm, loading space length: 5,413 mm, loading space width: 2,050 mm, loading space height: 2,579 mm, Year of construction: 2021, front tire size: 215/75R16, rear tire size: 215/75R16, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, traction control, Driving assistance system: Hill start assist, Electronic parking aid, Automatic air conditioning, LED daytime running lights, Electr. adjustable and heatable, Brake assist, Electric front windows, Front fog lights, Adjustable steering column (steering wheel), Central locking with remote control, Wheelbase 3450 mm, Electronic immobilizer, Traction control system (ASR), Airbag on passenger side, Electronic stability program (ESP), Seats in cab: Double passenger seat, Seats in cab: Height-adjustable driver's seat, Speed limiter system, Tire repair kit, Tire pressure monitoring system, 6x16 steel rims, Adjustable head restraints, Driver's side airbag, Drive type: Front-wheel drive, Equipment package: Mopar Connect, E - Ducato package, Electric motor 90 kW (cont. 58 kW), Driving assistance system: Adaptive load control (LAC), Driving assistance system: Lane departure warning incl. Traffic sign recognition, Driving assistance system: Blind spot assistant, Color display above dashboard (charging indicator, E - Ducato), Transmission for electric vehicle, Rear wing doors (opening angle 260 / 270 degrees), Rear axle reinforced (suspension), HV battery 47 kWh, Infotainment system: Touchscreen, Navigation, DAB, Apple CarPlay and Android Auto, Body/bodywork: Box high compartment, charging cable with type 2 plug for high-voltage battery (mode 3), removable load compartment partition (without window), LED lighting load compartment, steering wheel and gear/selector lever handle in leather, reversing alarm acoustic (warning signal outside), headlight surround black, side protection strips, seats in cab: Driver's seat with armrest and lumbar support, Sun visor on the right with wide-angle mirror, Tele camera to the rear, Touchscreen color display (7 inch), USB port, Lightly tinted glazing, Lashing eyes load compartment floor (2) Note Despite careful checking of all our prices, errors can still creep in. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! Knjdpovikqajfx Afdeb - .

Condition: used, functionality: fully functional, machine/vehicle number: HR13445, Year of construction: 2020, operating hours: 8,625 h, load capacity: 2,500 kg, lifting height: 2,790 mm, free lift: 140 mm, fuel type: diesel, mast type: duplex, construction height: 2,000 mm, power: 43 kW (58.46 HP), fork carriage width: 1,070 mm, empty load weight: 4,000 kg, total length: 3,559 mm, drive type: Diesel, construction width: 1,157 mm, Diesel forklift Chassis number: HR13445 Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Techtronix 100, 1-speed Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Kodpszztprjfx Afdjnb Rear tire type: Superelastic Description: Machine completely inspected in the workshop, cleaned, and UVV and inspection newly approved! Damaged paint spots can be touched up or filled on request. Side shifter, 3rd valve, load guard, full cabin, CE certificate, interior mirror, LED, seat, LED lights mounted on the lifting structure, black seat belt, Grammer seat, air-suspended, vinyl, 3-way hose set, pedestrian warning light, 2 front and 1 rear LED work lights with side, brake, tail, turn signal, and reversing lights.

Condition: used, mileage: 1,66,794 km, power: 74 kW (100.61 HP), first registration: 07/2012, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * Engine warning light, possibly related to the particulate filter Knsdpfozdwtmjx Afdob * Trailer coupling, special equipment: Rear wing doors with glazing, load compartment partition, high, behind driver and passenger, with window (deformable for driver's seat back) Additional equipment: Airbag, driver's side, turn signal integrated into exterior mirror, city lights, double locking system, tachometer, electronic differential lock (EDS), driving assistance system: hill start assist, rear wing doors (opening angle 180 degrees), heater with recirculation, body variant: medium-height roof, headlight range adjustment, engine 2.2 L - 74 kW TDCi CAT, production facility: Otosan, wheelbase 3300 mm, wheel covers, low emissions according to emission standard Stage 5 / Euro 5, sliding door, cargo/passenger compartment, right-hand side, mud flaps, front and rear, seat package 22: driver's seat (3-way adjustable) - passenger double seat, tinted glazing, lining in the cargo/passenger compartment: hard fiber.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Knedpfxjykug So Afdeb Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: used, mileage: 27,000 km, power: 215 kW (292.32 HP), first registration: 07/2025, fuel type: hybrid, color: black, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Comfort Package, lumbar support for front left and right seats, electrically adjustable, ambient lighting, inductive charging tray for smartphone (wireless charging), luggage compartment package, light alloy wheels front/rear: 7.5x18 / 8.5x18 (V-spoke 780, bicolor), metallic paint, seat cover / upholstery: perforated Sensatec, sun protection glazing (darkened at the rear), sports seats front Additional equipment: Storage package, airbag on passenger side can be deactivated, airbag driver/passenger side, acoustic pedestrian protection (exterior sound), equipment package: Connected Professional, service system: Remote Services, exterior equipment: Shadow-Line high-gloss, exterior mirrors electrically adjustable and heated, exterior mirrors in vehicle color, turn signal integrated into exterior mirror, BMW Live Cockpit Plus, service system: Intelligent emergency call including TeleServices, service system: BMW Intelligent Personal Assistant, BMW Curved Display, on-board computer, DAB tuner (digital radio reception), roof rails high-gloss Shadow-Line, anti-theft wheel bolts, through-loading system (rear center armrest), dynamic brake light, dynamic traction control (DTC), first aid kit, driving assistance system: driving experience switch, remote unlocking of tailgate, floor mats velour, footwell lighting front, luggage compartment separation (net), luggage compartment lighting, speed limiter (speed limit device), rear lights LED, hybrid 215 kW (engine 2.0 L - 135 kW), interior equipment: interior trim Quartz Silver matte, body: 5-door, automatic climate control 3-zone with automatic recirculation control, head airbag system rear, head airbag system front, rear headrests folding, charging cable with Schuko plug, steering wheel (sports/leather) with multifunction buttons, light alloy wheels, model refinement (2), gasoline particulate filter (OPF), park distance control (PDC) front and rear, parking assistant package, driving assistance system: parking assistant, driving assistance system: parking aid side, driving assistance system: reversing assistant, driving assistance system: reversing assistant with emergency braking function (Active PDC), parking brake electrical, personalization system (Personal eSIM), low emission according to emission standard Euro 6e, turn signal lights LED, side airbag rear, side airbag front, service system: eDrive Services, seat heating front, mirror package, exterior mirrors electrically foldable, exterior mirrors with automatic curb function, right, interior mirror with automatic anti-dazzle function, start/stop system (function), warning triangle, widescreen display, heat protection glazing tinted, windshield (version: climate comfort). Kjdpfx Afozt D Hxsdsnb

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Ksdpezxzrpofx Afdonb Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Condition: new, functionality: fully functional, power: 183.87 kW (249.99 HP), fuel type: diesel, axle configuration: 4x2, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: airbag, cable winch, differential lock, From our immediately available stock of new vehicles, we offer you: MLF/TLF 2500 crew version on MAN TGL 12.250 4x2 Our MLF on MAN TGL meets many requirements. In addition to a crew configuration and ample space for equipment, it also provides a substantial water supply. This enables immediate firefighting operations without delay. Chassis: • MAN TGL 12.250 4x2 EURO 6 with 250 HP (184 kW) • Automated gearbox • Differential lock • Twin tires on rear axle for high driving stability • Front winch available upon request Cab • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 BA (breathing apparatus) holders in the crew compartment Body • High-quality superstructure in frame construction, made from rust and corrosion-free materials • Folding steps for each side equipment compartment • Stainless steel equipment mounts individually adapted to your requirements • Walkable, anti-slip vehicle roof • Generous roof box Ksdpfx Aoxn T Uzofdjnb Vehicle Pump/Extinguishing Agent Tank • Maintenance-free combined normal/high pressure pump FPN 2000-10 • PUMP&ROLL-capable • Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • 2,500 l water tank with integrated 250 l foam agent tank • Additional heating in GR (pump compartment) Firefighting Equipment • High-pressure rapid intervention hose reel with 50 m form-stable hose • 2,000 l/min foam/water monitor on the vehicle roof • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting • LED lightbar on vehicle roof/2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W loudspeaker system with announcement unit • Rear-view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on body and additional spotlights • Pneumatic LED light mast with remote control • Rear warning system • Hygiene board available upon request We would be happy to provide you with a detailed quotation and give you a comprehensive vehicle demonstration at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer but serves as information only. Subject to prior sale!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Knedpfx Aeykty Dsfdjb Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system Kjdpfx Afowfgbrjdjnb 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2017, SICK S30B-3011BA Safety Laser Scanner Features Design sensor without system connector Indoor application area Protective field range 3 m Warning field range 8 m (at 15 % remission) Distance measuring range 30 m Type of field set Triple field sets Number of field sets 1 Number of fields 3 Number of monitoring cases 1 Scanning angle 270 Resolution (configurable) 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angle resolution 0.5° Response time 80 ms 1) Protective field allowance 100 mm Number of multiple evaluations 2 ... 16, configurable Delay of automatic reset 2 s ... 60 s, configurable Safety characteristics Kjdjpudqxjpfx Afdonb Type 3 (IEC 61496) Safety integrity level SIL2 (IEC 61508) Category Category 3 (EN ISO 13849) Performance Level PL d (EN ISO 13849) PFHD (mean probability of dangerous failure per hour) 8.0 x 10-8 TM (service life) 20 years (EN ISO 13849) Function Restart interlock ✔ Contactor monitoring (EDM) ✔ Multiple evaluation ✔ Contour as reference ✔ Integrated configuration memory ✔ Measurement data output Measurement data output Via RS-422 Secure SICK device communication via EFI ✔ Connection type Connection type System connector with or without connecting cable Universal I/Os 5 1) Inputs Contactor monitoring (EDM) 1 2) Reset/restart 1 2) Stand-by 1 Outputs OSSD pairs 1 Signal outputs 3 3) Type of configuration PC with CDS (configuration and diagnostics software) Configuration and diagnostics interface RS-232 Transmission rate 38.4 kBaud Data interface RS-422 Transmission rate ≤ 500 kBaud Secure SICK device communication via EFI Transmission rate ≤ 500 kBaud Cable length ≤ 50 m Conductor cross-section 0.22 mm² 1) Freely programmable, e.g. contactor monitoring input, reset input, contamination warning, reset required. 2) Availability depends on configuration of universal I/Os. 3) Freely programmable, e.g. warning field, contamination, reset required. Protection class III (EN 50178) EN 60950 Supply voltage Uv 24 V DC (16.8 V DC ... 30 V DC) Current consumption ≤ 0.33 A 1) ≤ 1,7 A 2) Outputs Safety outputs (OSSDs) 2 x 250 mA Signaling outputs 3 x 100 mA 3) 1) At 24 V DC without output load. 2) At 24 V DC with maximum output load. 3) Freely programmable, e.g. warning field, contamination, reset required. Item condition: new, from stock liquidation (Without original packaging). Year of manufacture 2017 Financing through our bank is also possible. komplett-konzept.leasingo.de More scanners - new and used - you can find in our store! International shipping costs on request!

Condition: new, Year of construction: 2022, SICK S30B-3011BA Safety Laser Scanner Features Design sensor without system connector Indoor application area Protective field range 3 m Warning field range 8 m (at 15 % remission) Distance measuring range 30 m Type of field set Triple field sets Number of field sets 1 Number of fields 3 Number of monitoring cases 1 Scanning angle 270 Resolution (configurable) 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angle resolution 0.5° Response time 80 ms 1) Protective field allowance 100 mm Number of multiple evaluations 2 ... 16, configurable Delay of automatic reset 2 s ... 60 s, configurable Safety characteristics Type 3 (IEC 61496) Safety integrity level SIL2 (IEC 61508) Category Category 3 (EN ISO 13849) Performance Level PL d (EN ISO 13849) PFHD (mean probability of dangerous failure per hour) 8.0 x 10-8 TM (service life) 20 years (EN ISO 13849) Function Restart interlock ✔ Contactor monitoring (EDM) ✔ Multiple evaluation ✔ Contour as reference ✔ Integrated configuration memory ✔ Measurement data output Measurement data output Via RS-422 Secure SICK device communication via EFI ✔ Connection type Connection type System connector with or without connecting cable Universal I/Os 5 1) Inputs Contactor monitoring (EDM) 1 2) Reset/restart 1 2) Stand-by 1 Outputs OSSD pairs 1 Signal outputs 3 3) Type of configuration PC with CDS (configuration and diagnostics software) Configuration and diagnostics interface RS-232 Transmission rate 38.4 kBaud Data interface RS-422 Transmission rate ≤ 500 kBaud Secure SICK device communication via EFI Transmission rate ≤ 500 kBaud Cable length ≤ 50 m Knjdopudtlepfx Afdjb Conductor cross-section 0.22 mm² 1) Freely programmable, e.g. contactor monitoring input, reset input, contamination warning, reset required. 2) Availability depends on configuration of universal I/Os. 3) Freely programmable, e.g. warning field, contamination, reset required. Protection class III (EN 50178) EN 60950 Supply voltage Uv 24 V DC (16.8 V DC ... 30 V DC) Current consumption ≤ 0.33 A 1) ≤ 1,7 A 2) Outputs Safety outputs (OSSDs) 2 x 250 mA Signaling outputs 3 x 100 mA 3) 1) At 24 V DC without output load. 2) At 24 V DC with maximum output load. 3) Freely programmable, e.g. warning field, contamination, reset required. Item condition: new, from stock clearance (Without original packaging) Year of manufacture 2022 Financing through our bank is also possible. komplett-konzept.leasingo.de More scanners - new and used - you will find in our store! International shipping costs on request!