Used Rafamet Ubc 150 for sale (9,365)

Condition: ready for operation (used), 9 kW, 150 degrees Celsius Bdjdpozab A Eefx Adgjc Two units in stock Warranty: 6 months

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Screw: Ø 50 mm CLAMPING UNIT Clamping force: 1500 kN Opening stroke: 607 mm Ejector stroke: 150 mm Ejector force: 61 kN DRIVE Pump drive power: 30 kW INJECTION UNIT 1 Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Screw speed current: 250 r/min Injection rate: 210 cm³/s Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Bodoy Rn E Aopfx Adgsdc Nozzle cont. pressure: 67.2 kN

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,052 h, load capacity: 15,000 kg, lifting height: 3,180 mm, fuel type: diesel, mast type: simplex, construction height: 2,940 mm, fork carriage width: 1,700 mm, fork length: 1,100 mm, empty load weight: 25,060 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,000 mm, Compact forklift – Diesel Load center: 600 Fork width: 160 mm Fork thickness: 100 mm Bdodpfx Aoy Tzqqodgoc Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 40x20x30 Rear tire type: Solid tires Rear tire size: 28x12x22 Description: In addition to this autumn model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this ATAIR IV D 150CV Super Compact. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Side shifter, fork positioner Fork positioner opening range: 350/1120 mm Heater, full cab

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Veneer sanding unit: yes Oscillation: yes Bdedpfx Adoyffxzjgec Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg Bsdpfx Adey Rrywogjdc – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: excellent (used), Year of construction: 2004, CATALOG NUMBER 7880 Technical data: - max cutting height: 150mm - max element width: 500mm - working width of shaft with saws: 400mm - shaft diameter: 70mm - max saw blade diameter: 450mm - from above: - anti-kickback devices - 2 toothed feed rollers – pneumatically pressed - from below: - slip roller - anti-kickback devices - 2 toothed feed rollers - saw shaft - 2 toothed feed rollers - stepless feed speed adjustment via inverter - feed motor: 3kW - main motor: 55kW - overall dimensions L/W/H: 2120x1600x1630mm Bjdpfx Ajy Rrpxsdgodc - weight approx. 2750kg ADVANTAGES – Polish-made – robust construction – Used machine, in very good condition Net price: 55,900 PLN Net price: 13,310 EUR at 4.20 EUR exchange rate (Prices may vary with greater exchange rate fluctuations)

Condition: used, Year of construction: 1991, width of the strips 150 mm band length 2.000 mm Bjdpfx Aoy Ty A Ejdgjdc motor 400 V loading area 450 x 160 mm total power requirement 4,0 kW dimensions of the machine ca. 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, The machine is in good technical condition, including a rotary table S 35, table dimensions 2850 x 3150 mm (photo in the attachment), 2 clamping plates, a HUI 50 swivel head, a tool magazine for 80 tools, and a Siemens 840 D control system. WRD 150 CNC Year of manufacture: 2008 Bjdey U Ndzopfx Adgjdc Control system: SINUMERIK 840 D X-axis: 9000 mm Y-axis: 4000 mm Z-axis: 1000 mm W-axis: 800 mm Power: 60 kW Tool magazine capacity: 80 tools Clamping plates: 2, 6000x2000 mm Swivel head: HUI 50

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, color: orange, axle configuration: 4x4, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, suspension: steel, loading space volume: 1.5 m³, number of cylinders: 4, Equipment: additional headlights, air conditioning, all wheel drive, cruise control, trailer coupling, We are offering this Schmidt Flexigo 150 sweeper machine, manufactured in 2023, which is in very good condition. Bdedpfszam Exox Adgjc If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Injection molding unit Type 150 Bdedov Tp Ncepfx Adgjc Removed from an Arburg 420C 1000-350/150 Screw diameter 35 mm Complete with hydraulic motor, valves, etc. PRICE REDUCTION FROM 1200 TO 850 EUR!!!

Condition: new, Michaelis circuit board, article number. Bdodpfx Ajzaamvedgoc

Condition: new, 2 Michaelis control units. Bedpfxszaalre Adgjdc

Condition: used, Electric chain hoist, electric hoist, crane GIS type 150 / F serial no.: 1502802 year of construction 1981 lifting capacity 1500 kg hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines Bodpfxegi E Evs Adgedc good condition

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg Bsdsv Dxm Sjpfx Adgjdc good condition

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 28450 € 543.4 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended Bedpfx Adoyb Szhegsdc

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, Manufacturer: Werth Messtechnik GmbH Type / Model: Scope-Check 400 × 400 × 150 3D CNC Machine Type: Multi-sensor Coordinate Measuring Machine (optical / tactile) • Year of Manufacture: 2006 • Serial Number: 06-00376 Condition • Used, well-maintained overall condition • Machine was fully operational in measurement use until recently • Regular calibrations documented • No visible damage to granite, guides, or measurement system Accessories / Delivery Scope • Granite-based machine with measurement glass and protective cover • CNC control with Scope controller • Renishaw probe (multiple stylus inserts included) • PC workstation comprising: • Computer • Monitor(s) • Keyboard, mouse • Control panel / joystick • Documentation: • User manuals (WinWerth) • Calibration and inspection reports • Folder with machine and measurement room documentation • Software and calibration data carriers (CD/DVD) • Integrated control cabinet with main switch Application Area • Form and position tolerance inspection • Dimensional inspection of: • Sheet metal forming parts • Turned and milled components • Tools • Prismatic and rotationally symmetric parts The unit is currently still installed and powered. An inspection while operational is possible by appointment. Dismantling, loading, and transport are to be carried out and borne by the buyer. • Measuring range (X/Y/Z): 400 × 400 × 150 mm Bdjdpfx Adsx Sw R Djgec • Control: CNC • Software: WinWerth, version 8.40 or higher (data carrier included) • Tool holder / probe: Renishaw, MK 2 • Probe system: Renishaw Probe Interface PI 200 • Measurement accuracy: • Length measurement deviation approximately 1.5 µm (according to Werth documentation / calibration records) • Voltage: 230 V AC • Frequency: 50 Hz • Power consumption: max. 10 A

Condition: good (used), Year of construction: 2006, Used 3-meter Bystronic press brake Type: PR 150 3100 Bdodpsy Tml Hofx Adgjc Capacity: 3100 x 150 tons Y1, Y2, X, R, Z1, and Z2 CNC-controlled Cybelec ModEva 12 CNC control Hydraulic RFA top clamp Hydraulic Wila 13mm bottom clamp Includes 1 set of tooling as shown Year of manufacture: 2006

Condition: good (used), KOEBAU MULTIMAT 150-6 is a centreless grinding machine of high precision, providing great accuracy and reliability. Grinding Ø 2–100 mm; wheel width 200 mm; main wheel new Ø600/used 400 mm, bore 305 mm; regulating wheel new Ø300/used 180/210 mm, bore 127/152 mm. Wheel speeds 23–45 m/s; regulating spindle stepless 10–100 t/min. Supply 3x380 V 50 Hz; main motor 18.5 kW; size 2500×2100×2200 mm; weight ≈4200 kg. Coolant system. Suitable for tight tolerances in automotive, tooling, aerospace, medical and watchmaking. Bjdpfx Aoy S Dd Dsdgodc

Condition: like new (used), 🧰 Product Features Clearance stock, available for immediate pickup! • Manufacturer: Nedcon • Colour: Frames pre-galvanised, beams hot-dip galvanised • Condition: As new • Frames: 12 pcs. pre-assembled, 700 x 110 cm • Frame width: 10 cm • Beams: 100 pcs. with 269 cm clear span • Safety: 200 pcs. galvanised locking pins • Anchoring: 48 pcs. Hilti concrete anchors • Load capacity: 3,000 kg per level • Bay load: 12,000 kg 💰 Price € 4,500 net, excl. VAT • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Bdjdpfx Adjw Dptzogoc Always over 5,000 linear metres of pallet racking from various manufacturers in stock (Specifications, details, and prices are subject to changes and errors. Subject to prior sale. See our Terms and Conditions. All prices excl. VAT, ex stock.)

Condition: used, bore 50 mm length 310 mm knife system Centrolock Bdedpfx Adjyz Dftjgsc circle diameter 150 mm number of blades 4 Z Two planing heads Weinig type 531 150 01 498 including a batch of untested knives.

Condition: excellent (used), I sell Esab LTG150 welding machine in very good condition. Bdjdpou Sun Esfx Adgec

Condition: good (used), Year of construction: 1994, I will sell a Tampoflex Jumbo 150-400 pad printing machine, manufactured in 1994. Functional and in good condition. Bsdpfxov Eqats Adgsdc

Condition: good (used), Year of construction: 2012, operating hours: 15,796 h, Maximum pressure: 8 bar Delivery rate: 18.4 m3/h Rated power: 110 kW Compressor mains voltage: 400 V / 50 Hz Bsdpfx Adey Tui Tegsdc Dryer mains voltage: 400 V / 50 Hz Compressor has been regularly maintained; has been out of operation for 2 years.

Condition: good (used), functionality: fully functional, “Steinert NES 150 210 E 6119” for Sale Manufacturer: Steinert Bdsdpey S Tv Nefx Adgjc Type: NES 150 210 E 6119 Belt widthness: 1.500 mm (New belt) With control-unit. Overhauled, balanced, sandblasted and painted.

Condition: new, neu ca. 2 Wochen ab Auftragse 880.52 € 150 mm 40 mm 200 mm 33 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. Bdsdpsyui Ufsfx Adgoc The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary