Used Rietschle Vc 700 for sale (6,420)

Condition: used, functionality: unexamined, input voltage: 345 V, input frequency: 87 Hz, input current: 4 A, rotational speed (max.): 5,000 rpm, Elmo Rietschle G-BH1 BH1430 Vacuum Blower, new Hnsdpszv Sn Nsfx Ah Sjt Manufacturer: Elmo Rietschle / Gardner Denver Model: G-BH1 BH1430-7A221 Adjustable speed, Voltage: 380 Volt, 50 Hz.

Condition: excellent (used), Year of construction: 2012, operating hours: 10,168 h, functionality: fully functional, machine/vehicle number: NL254120635, CNC turning machine Manufacturer: DMG MORI Type: NLX 2500 SY 700 with WH10 automation Year of manufacture: 2012 Turning diameter: 460 mm Turning length: 795 mm Control system: MORI SEIKI M730 BM Hnodpfx Aey Szwhoh Sst Diameter over cross slide: 590/360 mm Spindle bore: 80 mm Travel distances X/Z: 260/795 mm Total power consumption: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 3.994 x 3.056 x 2.187 m

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Spindle speed: 12,000 rpm Table area: 1,020 × 510 mm Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax EQUIPMENT Internal cooling system (ICS) Fourth axis Hnsdpfxoz Ahx Ds Ah Set

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. Hsdpfx Ahozxz Dfo Sjnt I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm Hsdpszlcyuofx Ah Sjnt with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Hodpfx Ajzv T Aush Sent Divert bin Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just passed through our complete maintenance program. The machine is therefore 100% complete works like new. Please come over for a test if you like.

Condition: used, functionality: fully functional, total width: 600 mm, total length: 900 mm, total height: 2,100 mm, Pie filling machine, brand Anko. Hnsdpfezxh Rfjx Ah Set

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 2500 x 700 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 800 mmZ axis traverse: 800 mmVertical capacity (VC): 22 / 822 mm Milling head Head type: Manual universal long nose head (Option: new automatic milling head UDG 2,5º)Tool clamping system: HydraulicTaper nose: ISO-50 (DIN 2080)   /   Pull stud: DIN 69872Speed range: 4000 rpmSpindle power: 22 kW Feedrates Working feedrate: 5 - 5000 mm/minRapid feedrate (X,Y,Z): 12000 mm/min Weight and dimensions Maximum weight on table: 4000 kgMachine weight approximate: 9500 kgMachine dimensions approximate: 6605 x 3315 x 2730 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Hnjdjzq H Ugopfx Ah Sot

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K Hnjdpfxezv Tz Rj Ah Set 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just passed through our complete maintenance program. The machine is therefore 100% complete works like new. Please come over for a test if you like.

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 315 mm, feed length Z-axis: 175 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 50 rpm, quill travel distance: 175 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 9 m/min, rapid traverse Z-axis: 4 m/min, total width: 2,480 mm, total length: 1,620 mm, table width: 1,230 mm, table length: 410 mm, position of the milling head: vertikal, type of input current: AC, rotational speed (max.): 9,000 rpm, rotational speed (min.): 50 rpm, overall weight: 3,200 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, space requirement width: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 2,450 mm, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Due to restructuring measures, we are selling our CNC milling machine – Fehlmann Picomax 80 CNC 2/3 - robust Swiss precision machine - year of manufacture 1995 - low operating hours - very good condition considering its age - Heidenhain 315B control system - 4 axes (X, Y, Z + A [rotary axis]) - axes can be moved in parallel - travel distances X700 x Y315 x Z170 (+W495) mm - table 1,320 x 410 mm - 4th axis (rotary axis) AT100 original Fehlmann with 140mm three-jaw chuck and collet chuck - manual control panel - spindle 50 – 9,000 rpm - complete steel sheet enclosure with safety glass Hsdpezzd Hhsfx Ah Ssnt - fully functional - complete operating and programming manual - spare parts and service available from Fehlmann - machine can be inspected while powered on Depending on the price, a wired measuring probe (Renishaw), an electric fine milling and grinding spindle from RAY (Switzerland) 10,000 - 40,000 rpm, and various tool holders can be included. This offer is subject to change. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made with the exclusion of any warranty. Pick-up only (EXW) - no shipping.

Year of construction: 2006, condition: ready for operation (used), Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible. Hnedpfswg E Dzex Ah Set

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Electrical control cabinet IMO iSmart controller Lenze frequency inverter 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Price: €3,000 Hnjdpfx Ahszu Nf Aj Set For further information or additional photos, please contact me via message.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. Hjdpfszy N Nlex Ah Ssnt - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2008, power: 5.5 kW (7.48 HP), type of input current: three-phase, cutting height (max.): 104 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, I am selling a high-quality Felder K700 panel saw, manufactured in 2008. The machine is in good, well-maintained condition and is fully functional. Ideal for carpentry shops, joineries, or ambitious woodworkers. Technical data: + Manufacturer: Felder + Model: K700 + Year of manufacture: 2008 + Motor power: 5.5 kW + Voltage: 400 V (three-phase) + Saw blade diameter: up to approx. 315 mm + Cutting height: approx. 100 mm at 90° + Cutting height at 45°: approx. 70 mm + Main saw blade speed: approx. 4000–5000 rpm + Sliding table length: approx. 2,600 mm + Rip fence length: corresponds to the sliding table + Parallel fence: finely adjustable with scale + Miter fence: with fence guide + Dust extraction port: available (top and bottom) Equipment: + Smooth-running, precise aluminum sliding table + Robust cast iron table + Scoring saw (belt missing / never used) + Height- and swivel-adjustable saw blade (0–45°) + Safety guard with dust extraction + Precise cutting guidance through stable fences + Low maintenance and long-lasting Other: Hsdpfx Aheywlkie Sjnt Inspection and test run possible by arrangement. Shipping via freight forwarder is possible. Loading can be assisted. Price: €4,250

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Hsdpfxevxpuij Ah Sent Ready For Delivery. Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: used, Year of construction: 2006, machine/vehicle number: XDCY003807, Bertolaso Sorting Unit Hnodpjz Ai Duefx Ah Sot

Condition: used, Year of construction: 2021, Chamber dryer for recycled plastics. Manufacturer: Creative Machine Building Center Year of manufacture: 2021 Hnjdpfx Ahoztzzgs Set Power supply: 400 V Power: 75 kW Capacity: 700 kg/h (soft plastics) 1000 kg/h (hard plastics) External dimensions of the machine: - length: 4,000 mm - width: 1,500 mm - height: 2,600 mm Includes a belt conveyor. Technical condition: used

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Hjdpfx Ahov T Rtis Ssnt Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1600058, total height: 300 mm, total width: 670 mm, total length: 890 mm, rotary table diameter: 600 mm, table diameter: 600 mm, compressed air connection: 8 bar, Haas HRT600 CNC rotary table / 4th axis / Ø 600 mm Haas HRT600 CNC rotary table (4th axis) for sale. This rotary table comes from a Haas VF-6B/40HE and was used as a 4th axis. The table is equipped with a servo drive and was tested on the machine again before removal. The axis could be moved and rotated flawlessly via the control. The rotary table has a diameter of approximately 600 mm. Serial number of the rotary table: 1600058. Condition Rotary table rotates and moves via the Haas control. Functionality tested before removal. No detailed geometric measurement performed. Hnedpfxezzbitj Ah Sst Angular accuracy, runout, and repeatability were not checked with a dial indicator. Sale due to non-use. Technical data Manufacturer: Haas Automation Model: HRT600 Type: CNC rotary table / 4th axis Table diameter: 600 mm Serial number: 1600058 Year of manufacture probably 2004/2005 (matching the original machine)

Condition: used, Year of construction: 2012, functionality: fully functional, Weiler Primus VC Precision Lathe, manufactured in 2012. 3-axis digital display from Siemens with AC drive and stepless speed control. CE certified. Technical specifications: >> Year of manufacture: 2012, Machine No. HB 01 >> Center height: 140 mm >> Distance between centers: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 Hnsdezl T Hxspfx Ah Set >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display from Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck, 160 mm, with 7 sets of jaws >> Stop >> Mulifix, size A, with 4 steel holders >> Electric chip guard >> Machine lamp >> Spindle stop, drill chuck, center >> Change gears >> Splash guard About the machine: Offered for sale is a Weiler Primus VC lead screw and draw spindle lathe, manufactured in 2012, in very good condition. The control system, in combination with a precision lathe from Weiler, performs the following functions: graphical display of travel paths and travel direction, graphical representation of the coordinate system on the lathe, compensation of tool corrections, zero point shift to compensate for workpiece position, radius/diameter switching, graphical display of the main spindle direction of rotation, and graphical display of the position of the machine's speed potentiometer. This is a very nice lathe with AC drive and stepless speed control of the spindle. All slides move very easily and smoothly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that are as smooth as ground surfaces. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: used, Year of construction: 1987, machine/vehicle number: 015988798960, Item No. 26303 Technical Data: - Punching force: 700 kN - Punching capacity, e.g.: up to 30 mm diameter in steel, 20 mm - Or with special punching unit: up to 150 mm diameter in steel, 4.0 mm Hnedpfozzzi Hjx Ah Set - Stroke adjustable in steps: 0 to 75 mm - Stroke rate: 13 to 48 strokes/min - Overhang: 760 mm - Installation height: 240 mm - Working height: 1040 mm - Drive: 400V / 8.5 kW - Space requirement: approx. W 750 x H 1900 x D 1750 mm - Weight: approx. 1650 kg - Includes: - Foot switch - Center-finding device - Support table with stops and scales

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, feed length X-axis: 559 mm, feed length Y-axis: 406 mm, feed length Z-axis: 508 mm, controller model: NGC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, 12,000 rpm inline direct-drive spindle High-speed, 30+1 tool capacity side-mount tool changer Hnjdpfszr U Hyjx Ah Sot Integrated pallet changer with 559 x 368 mm T-slot pallets Machine parts are placed on one pallet while the other is being prepared.

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed Hnjdpfx Aezqdagsh Sot The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: like new (used), Year of construction: 2008, operating hours: 3,088 h, functionality: fully functional, machine/vehicle number: P08ZWG962, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, feed rate X-axis: 54 m/min, feed rate Y-axis: 54 m/min, feed rate Z-axis: 54 m/min, total height: 2,336 mm, total length: 1,565 mm, total width: 2,027 mm, table width: 400 mm, table length: 650 mm, table load: 300 kg, overall weight: 2,100 kg, spindle speed (min.): 24,000 rpm, distance table center to spindle nose: 250 mm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, The machine is in very good condition and has been used sparingly. It has only processed aluminum alloys. The machine comes with various tool holders, as shown in the photo – thermal tool holders, Weldon tool holders, etc., a total of 47 pieces. It also includes a probing sensor: Garant Hoffmann 359500 – a 3D digital sensor with a tactile probe. The spindle has a BT30 tool holder taper. Hnsdjzw Iv Ejpfx Ah Sjt The video shows the machine with a 4-5 axis configuration, but this is not included in the sale. Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), functionality: fully functional, CNC Heavy-Duty Lathe POREBA TPK-90N × 2000 mm – SIEMENS CNC We offer a heavy-duty CNC lathe POREBA TPK-90N with a turning length of 2000 mm, equipped with a SIEMENS CNC control. The machine is designed for precise machining of large and heavy workpieces. Its robust construction and massive machine bed, characteristic of POREBA heavy-duty lathes, provide high rigidity during machining. Main technical specifications: Manufacturer: POREBA Model: TPK-90N CNC control: SIEMENS Turning length / distance between centers: 2000 mm Swing over bed: approx. 930 mm Swing over carriage: approx. 630 mm Swing in gap: approx. 1200 mm Spindle bore: approx. 95 mm Max. spindle speed: up to 800 rpm Main motor power: approx. 22 kW Tailstock taper: Morse 6 Main features: SIEMENS CNC control, heavy and highly rigid machine construction, large swing over bed of approx. 930 mm, 2000 mm turning length, suitable for machining large and heavy workpieces, Hsdoz Atg Tspfx Ah Sjnt proven design of POREBA heavy-duty industrial lathes. The machine is located in Bydgoszcz, Poland. Inspection and test run are possible by prior arrangement. METALEX – machine tools since 1979.