Used Rvs Triple-Trough Conveyor With Dosing Unit for sale (40,196)

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Nwedpoxcvzaofx Af Rei Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Nwjdpfx Aoxcgihsf Rsi Product-contacting surfaces Elastomers with FDA compliance declaration Product-contact parts can be autoclaved Easy integration due to compact design

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22023.0202.1000, Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt upper edge adjustable from 980 to 1080 mm Undercarriage made of robust box section profiles Design in stainless steel, material 1.4301 Knife edge on both sides, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor, make: SEW, included Food-safe coating (depending on lead time) Speed adjustable via frequency converter (between 0.8 - 8 m/min) Including adjustment frame for 5 dispensers by Viscotec Adjustment is primarily via profiles and clamping units Height adjustment carried out manually via clamping units, all dispensers are adjusted simultaneously. Fine adjustment of the dispensers can be carried out individually via elongated holes, if necessary. Each dispenser can be adjusted laterally, in inclination, and in/conveying direction independently. Without side guides Includes engineering Pre-assembly included Installation of dispenser included at our facility Nwodpfoxch D Hex Af Rei In-house testing included Surface: Conveyor in stainless steel 1.4301, round tubes for dispenser frame in stainless steel 1.4301, clamping units made of aluminum 5 bars are transferred from an existing conveyor system onto our conveyor belt Control cabinet made of stainless steel 1.4301 Control and frequency converter by Mitsubishi Electric Configuration: Main switch, emergency stop switch, automatic on/off buttons Display for setting speed in m/min and adjusting the delay time for the dispenser start signal Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only for our own machine. Including control cabinet construction with 50% spare capacity Including high-grade sensors (distance photoelectric sensors capable of measuring and evaluating distance) Including high-end control (hardware and software can be expanded at any time without the need to replace the controller) Including HMI (display), approx. 7" size Including E-Plan Including program Including in-house test (interface test with Viscotec) Surface: control cabinet fully in stainless steel, sensors in stainless steel and FDA-approved.

Condition: good (used), functionality: fully functional, overall weight: 200 kg, Labotek dryer Type: DDM 60 ALB Labotek CON-EVATOR material conveyor Nsdevrubnopfx Af Rswi Type: PGT 4/DDM Power: 0.5 kW

Condition: new, functionality: fully functional, power: 1.1 kW (1.50 HP), overall weight: 1,810 kg, Year of construction: 2026, total length: 2,200 mm, total width: 3,450 mm, total height: 2,380 mm, input voltage: 400 V, conveyor belt length: 3,000 mm, conveyor belt width: 400 mm, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO® VS MEDI vibration screen with conveyor belt optimizes material processing for recycling, construction, agriculture, and gardening industries. It efficiently screens and transports materials, saving time and increasing overall throughput. Nodpfx Afjw U Rzao Rswi Key Features: • Dual vibration motors for high-performance screening • Integrated conveyor belt for continuous material transport • Optional bars for improved coarse-to-fine separation • Hopper for efficient material supply • Adjustable support feet for quick setup on uneven terrain Tech Highlights: W 3,45 m · L 2,2 m · H 2,38 m · Max bucket width 2,3 m · Screen area 2,7 m² · Qmax 55 t/h · Drive 2 x 0,55 kW · n 2 x 1400 rpm · Loading height 1,96 m · Weight 1810 kg · Conveyor belt width 0,4 m · Conveyor belt length 3 m · Conveyor belt drive power 400 V / 1,1 kW

Condition: good (used), functionality: fully functional, conveyor belt length: 3,500 mm, conveyor belt width: 500 mm, Length 350 cm Width 50 cm Height adjustable 2 units available Nsdpfxeyiar Ij Af Rowi Price: 950 EUR per unit

Condition: good (used), Year of construction: 2001, functionality: fully functional, conveyor belt length: 3,900 mm, conveyor belt width: 900 mm, Length 390 cm Nwedoylxmrepfx Af Roi Width 90 cm Height adjustable 2 units available The price is 1,250 EUR per unit!

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Njdpfxex R Df Se Af Rjwi Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Nedpfx Aoxk Tg Njf Rswi Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Nwsdsw Ad Rrepfx Af Roi Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2026, Trough belt, centrifugal impeller, shot blasting system, 7.5 kW, directly driven impeller turbine with 8 impeller blades. Belt width 700 mm and diameter 600 mm. Nwsdpfjg S Rt Eox Af Rsi

Year of construction: 2008, condition: good (used), Grist dust removal + 2 comp. Grav. dosing unit MB Engineering T 250, year: 2008, price: 6.800 €, contact: Mr. Rainer Eckerle Nwjdpfx Afjd S S Rzs Rei

Condition: good (used), mileage: 8,31,107 km, power: 353 kW (479.95 HP), first registration: 02/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, navigation system, power mirror, retarder, = Additional options and equipment = - Aluminium fuel tank - Tipping hydraulics - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Power take-off (PTO) - Power take-off (PTO) = Remarks = MAN TGX 18.480 TRACTOR, EURO 6, RETARDER, ALU TANK, HYDRAULIC UNIT, GERMAN REGISTRATION, VALID INSPECTION UNTIL 02-2026, TRUCK IS IN EXCELLENT CONDITION. MORE INFORMATION ON REQUEST. Nwodpfjwwthcex Af Roi = Further information = Technical information Number of cylinders: 6 Axle configuration Suspension: Air suspension Front axle: Steered; Left tire tread: 40%; Right tire tread: 40% Rear axle: Twin tires; Left inner tire tread: 60%; Left outer tire tread: 60%; Right inner tire tread: 60%; Right outer tire tread: 60%; Final drive: single reduction Weights Unladen weight: 7,821 kg Payload: 10,179 kg Gross vehicle weight (GVW): 18,000 kg Condition Technical condition: good Visual condition: good Further information Please contact Gerrit Haverhoek or Piet Haverhoek for more information.

Year of construction: 2020, condition: excellent (used), hopper with an integrated conveyor belt, featuring a metering screw at the front. Nwsdpfoilqfqjx Af Rsi Length: 9 meters, width: 2 meters.

Condition: used, Stainless steel dosing screw, pipe screw, auger Diameter: 150 mm Motor power: 1.1 kW, 148 rpm Entirely stainless steel Nwsdpfex Nykhsx Af Rei See our other listings VMA Wekerom

Condition: used, Dosing unit, dosing screw, dosing hopper Equipped with movable bottom to prevent bridging Njdpfx Afex Nzvfj Rswi Including control cabinet Screw diameter approx. 30 mm See our other advertisements VMA Wekerom

Year of construction: 1998, condition: good (used), Part of an old direct extrusion line for pipes (which is also still available). This machine is supplied with the following components: - 4-component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control system for dosing and extruder - Single-circuit oil tempering Nwedpfx Ajx S Rimsf Roi - Maag melt pump

Condition: ready for operation (used), * Brand: Integra * Model: screening machine with conveyors Nwodeywmyxopfx Af Roi * Screen surface: 4000 x 1100 mm – 2 Decks * Driving: 2 pieces of vibration motors of 4 kW each * Incl.: springs & construction. * Conveyors: 2 pieces * 1x: A-A length= 8000 mm, Beltwidth: 800 mm * 1x: A-A length= 3500 mm, Beltwidth: 650 mm * Driving: 3 kW Gearbox

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 10 l, Material Conveying Unit Simar FX 2504 Motor Power: 1.1 kW (brushed motor) Power Supply: 230 V / 50 Hz Container Capacity: approx. 5 litres Conveying Performance: approx. 150 – 200 kg/h (depending on material) Maximum Conveying Distance: approx. 15 – 20 meters Pipe/Hose Diameter: 38 mm (DN 38) Housing Material: Polished stainless steel Nsdpjy Hlv Refx Af Rewi Colorant Doser Simar FDX-2 Drive Type: Stepper motor (high RPM repeatability) Power Supply: 230 V / 50 Hz Speed: Infinitely adjustable (depending on control unit, typically 0.1 – 200 rpm) Color container capacity: approx. 5 – 10 litres

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. Nwjdpfjvg U Dxjx Af Rji -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Nwsdpfomk S Slsx Af Rei Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: ready for operation (used), Belt conveyor for sale Nsdpfx Aeznkt Iof Rswi ✅ Length: 7.6 m ✅ Belt width: 0.7 m ✅ Transportation can be arranged ✅ Large selection of belt conveyors available on site Please contact us. We will help you choose the right belt conveyor for your needs.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. Nedpfxsq Nfuzo Af Rewi 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: good (used), Screw Conveyor Custom made conveyor Overall dimensions: 3500 x 900 x 2600 mm Nsdehfdviepfx Af Rewi Screw dimensions: diam. 150 x 2700 mm

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Nsdpfx Afotp S E Es Rswi Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.