Used Scheer Router for sale (466)

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: Dkjdpfxsqwyclj Aptjt X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: new, machine/vehicle number: 8fbda13da8c595f64678f0f82, empty load weight: 2,100 kg, maximum load weight: 11,300 kg, overall weight: 13,400 kg, axle configuration: 2 axles, total width: 2,550 mm, tire size: 275/70 r 22,5, Additional information Chassis: Central axle semi-trailer Fine-grain steel welded construction Fifth wheel coupling, manufacturer at our discretion, for 2 kingpins, with ball bearing swivel ring, locking angle max. 20° Support at the drawbar and at the front dolly Underrun protection, steel Half-shell fenders Coupling system for central axle semi-trailer CLG under-coupling drawbar with tested 50 mm towing eyes for the dolly and the tractor unit, including drawbar locking mechanism on the truck! Axles + Suspension BPW disc brake axles Air suspension For swap train design, standard fifth wheel height lowered to approx. 1100 mm, fifth wheel height raised to approx. 1280 mm, fifth wheel mounting height approx. 1140 mm. Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit 2 fail-safe coupling heads with coil-flex connecting lines to the semi-trailer EBS, electronic braking system with EBS plug at the front, with connecting cable EBS coil-flex connecting lines to the semi-trailer With raising and lowering function, ECAS, via truck control, ECAS CAN 2 bus required in the truck. Without ECAS CAN 2 bus in the truck, additional operating control required in the truck (not included in the scope of delivery): Electrical system with a pre-wired cable and a distribution box. Operation via 15-pin socket, pin 11 and 15, or 2 x 7-pin socket, pin 7 and 5. Note! This design must be technically checked in conjunction with the semi-trailer. If it is not technically possible to raise and lower the dolly and semi-trailer together, the operation is carried out via WABCO eTASC with a hold function in the lowered position + auto-reset function (no power required from the truck). Additional operation on the vehicle via WABCO eTASC + hold function in the lowered position + auto-reset function (no power required from the truck) Vehicle driving stability system ECAS only possible in conjunction with WABCO EBS. Dsdpfxoi Rizxj Aptokt Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the cab, the truck must be appropriately prepared, no truck installation. Brake release function from the truck to PIN 14 and additionally via a button on the vehicle next to the H & S valve, for releasing the brake in the coupled state, EBS power supply must be ensured! With CAN router Wheels and tires 275/70 R 22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal, flashing side marker lights 2 white position lights at the front, LED 2 white/red side marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 2 x 7-pin fail-safe plugs with coil-flex connecting lines to the semi-trailer Cable + plug/or socket for reversing camera system, depending on the vehicle type Operating instructions Note! Observe the long truck regulations! Please note the currently permitted route network! The tractor unit must be brought to the Triptis plant for approximately 1 week for adjustment of the drawbar!

Condition: new, Year of construction: 2026, Technical data: Control system: multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 2 ms, correction map, RTCP, remote service access. Working area: 2100 x 3100 mm (optionally 2100 x 4100 mm) Z-axis clearance: 100 – 300 mm Dkjdsu U Hnaspfx Aptst Drive system: servo drives with EtherCat protocol, X and Y axes with hardened, helical ground racks, accuracy class 6; Z-axis with ball screw, accuracy class 5. Linear bearings: trapezoidal rails Rapid traverse speed: up to 80 m/min Software resolution: 0.0001 mm Positioning accuracy: 0.01 mm Gantry drive: dual-side master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW, inverter-driven Tool holder taper: ISO30 or HSK63 ER32 Maximum spindle speed: 24,000 rpm Construction: welded, ribbed, stress-relieved steel, precision machined Table type: vacuum Equipment options: - Material positioning and correction via camera, laser, or measuring probe - Revolver-type tool magazine - Tool cooling by oil mist or chilled air - 3D scanner (laser or touch probe) - Positioning bases - Drilling units, angular heads - Active oscillating knife, circular knife, drag knife, creasing tool, pen, knife - Electric and pneumatic options - Chip extraction system - Pneumatic sections - Printer, barcode reader - CAD/CAM software for furniture, cabinetry, and front design - Automatic central lubrication #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling machine, net price €68,800. Technical data: Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle: 5.5 kW (7.5 HP) motor First right vertical spindle: Shared motor with the left vertical spindle: 11 kW (15 HP) First left vertical spindle: Shared motor with the 1st right vertical spindle Second right vertical spindle: 5.5 kW (7.5 HP) motor First upper horizontal spindle: 7.5 kW (10 HP) motor Second upper horizontal spindle: 7.5 kW (10 HP) motor Second lower horizontal spindle: 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable: 5 - 30 m/min Motor: 4 kW (5.5 HP) Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. All spindles with high rotational accuracy. Standard equipment for PowerLock. Planing table length: 2 m (including a longitudinal guide) Marathon Coating for the machine table and guides Special coating for protecting the table segments and guides against excessive wear. Recommended for machining abrasive materials (e.g., tropical wood, MDF, chipboard). Djdoytd S Nopfx Aptskt OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 mm Tool diameter max. 300 mm Tool length: 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R), and height (H), with display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools NEW: PowerLock HSK63 adapter, shank D=50 x 260 mm 2. ROUTER HEADS WITH POWERLOCK MOUNTING, price €7,500 Two cabinets full of router heads for various applications, approximately 45 pieces.

Condition: excellent (used), functionality: fully functional, Sicar Furore 300I – Multi-function Machine SAW -Saw table length: 1200 mm Dkedezarwyopfx Aptst -Saw adjustable at an angle of 0 – 45° -Saw blade diameter: 250 mm -Cutting height: 80 mm -Motor power: 1.5 kW / 230 V Jointer -Working width: 300 mm -Table dimensions: 300 x 1500 mm -3-knife cutter block -Cutter block speed: 5700 rpm -Noise reduction combs -Both tables adjustable -Motor power: 1.5 kW / 230 V Thickness Planer -Table dimensions: 300 x 660 mm -Max. workpiece height: 220 mm -Feed rate: 7 m/min Router -Spindle diameter: 30 mm -2 speeds: 4300, 6000 rpm -Motor power: 1.5 kW / 230 V Drill Press -Work table dimensions: 500 x 250 mm -Longitudinal travel: 200 mm -Transverse travel: 100 mm -Eccentric clamping device

Condition: used, machine/vehicle number: 169/79, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Details of the R80SM model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Dkodpfxezfh Eio Aptst Typical technical parameters R80 - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, Technical specifications: Planer: Max. planing width: 350 mm Cutterhead diameter: 110 mm Number of knives: 3 Table length: 1760 mm Motor power: 2.2 kW Voltage: 380 V Thicknesser: Max. planing width: 350 mm Max. planing height: 230 mm Saw: Max. saw blade diameter: 250 mm Work table with carriage Motor power: 2.2 kW Voltage: 380 V Overhead router: Spindle diameter: 40 mm Manual spindle height adjustment Spindle height: 120 mm Motor power: 2.2 kW Voltage: 380 V Overall dimensions: Djdpfxeziayte Aptjkt Length: 2000 mm Width: 1300 mm Height: 1250 mm

Condition: used, Industrial security appliance for protecting and segmenting automation networks. Suitable for use in production facilities, machine controls, and industrial Ethernet networks. Manufacturer: Phoenix Contact Series: FL MGUARD Type: RS4000 TX/TX Product type: Industrial security router/firewall Dksdpszduzhjfx Aptst Condition: used Quantity: 1 Communication standard: Industrial Ethernet Ports: 2 × RJ45 Ethernet TX Transmission rate: 10/100 Mbit/s Function: Firewall, VPN, network segmentation Mounting type: DIN rail Protection class: IP20 Diagnostic functions: LED status indicators Application area: Industrial network security, remote maintenance, machine and system communication

Condition: good (used), Code: 0403 Brand: SICAR Model: BRAVA 350/3 - CE Standard 3-works combined machine (Surface planer /Thickness planer /Mortiser) for wood, joinery, furniture, joinery fittings, plastics and various – CE Standard Technical specifications: Working width 350 mm Work surface length 1600 mm Tilting of fenknives Knives dimensions 350 x 20 x 3 mm Thickness planer table dimensions 350 x 660 mm Max working height 220 mm Min working height 7 mm Feed speed 7 mt/min Router: Table dimensions 250 x 500 mm Longitudinal stroke 200 mm Transversal stroke 100 mm Vertical stroke 90 mm Chuck 16 mm Chuck rotation speed 5700 rpm Workpiece clamping presser Three-phase motor 2,2 Kw Overall dimensions mm 1700 x 950 x 1000 h Dedpfjzcfwxjx Aptskt Weight kg 340

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points. Dkodoyrn Raepfx Aptet

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: Djdjyyz Ebjpfx Aptekt - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Year of construction: 1999, operating hours: 47,973 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20472666, Complete compounding and granulation system based on a co-rotating twin-screw extruder, Krupp Werner & Pfleiderer ZSK 50, manufactured in 1999. The system is suitable for compounding, processing, and regranulating thermoplastic materials. Dkodpfjzn Um Esx Aptjt Previous process: ABS recycling The system consists of: Twin-screw extruder ZSK 50 Mc 900 with a process length of 36 L/D Drive power: 181 kW Screw speed: up to 1200 rpm including water ring vacuum pump and water cooling including Autotherm temperature control unit including strand die head Multi-component dosing and material feeding system from Colortronic - Graviblend (manufactured in 1999), gravimetric, with 5 gravimetric feeders, including vacuum material conveying with Busch vacuum pump, type RC 0160, suction via suction lances Downstream: Ettlinger melt filter, type ERF 200 with 1250 cm² filter area for up to 900 kg/h Water bath, 4.0 m, including heat exchanger Granulate air blower Scheer strand granulator SGS 200-E5, manufactured in 2011 Classification vibration screen Cooling screw conveyor Control cabinets included. The system is currently still assembled and can be inspected under power until the end of September.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,148 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 650 mm, spindle motor power: 37,000 W, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, positioning accuracy: 0.008 mm, tool weight: 20,000 g, number of slots in tool magazine: 48, number of axes: 5, This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details. Technical Data • Machine Type: Twin-Spindle Horizontal Machining Center • Control Unit: Siemens SINUMERIK 840D sl • Operator Panel: Siemens OP15T with integrated TCU • ECO Mode • Remote Diagnostics (eWON Router) • PROFIBUS Interface for Automatic Workpiece Loading • Signal Tower (3-color LED) Travels • X-Axis Travel: 750 mm • Y-Axis Travel: 660 mm • Z1-Axis Travel: 650 mm • Z2-Axis Travel: 650 mm Rapid Traverse • X-Axis: 60 m/min • Y-Axis: 60 m/min • Z1/Z2 Axes: 90 m/min Axis Performance • X-Axis Acceleration: 6 m/s² • Y-Axis Acceleration: 6 m/s² • Z1/Z2 Axis Acceleration: 9 m/s² • Feed Force X: 15,000 N • Feed Force Y: 15,000 N • Feed Force Z1/Z2: 10,000 N • Positioning Accuracy: 8 µm Spindle • Number of Spindles: 2 Dodpfezqr Sksx Aptokt • Precision Motor Spindles • Tool Holder: HSK-A63 (DIN 69893-1) • Spindle Speed: 12,000 rpm • Spindle Power: 37 kW (40% ED) • Spindle Torque: 85 Nm (40% ED) • Maximum Torque: 100 Nm • Direct Drive Axes / Swivel System • 2 NC B-Axes • 2 NC Rotary Axes (A-Axes) • Swivel Range: 0°–180° • Swivel Time (0°–180°): approx. 5 s Technology • Independent X, Y and Z Axes for both Spindles • Separate Direct Measuring System for each Axis • Independent Z-Axis Correction Range: 5 mm Tool Magazine • 96 Tool Stations (2 × 48) • Maximum Tool Length: 400 mm • Maximum Tool Diameter (Adjacent Pockets Occupied): 80 mm • Maximum Tool Diameter (Adjacent Pockets Free): 250 mm • Maximum Tool Weight: 20 kg Lubrication • Automatic Central Lubrication • 5-Channel Media Transfer (Oil or Air) Cooling / Coolant • 70 bar Through-Spindle Coolant • Coolant Tank Capacity: 2,300 l • Coolant Flow Rate: 400 l/min • High-Pressure Pump: 15 kW • Automatic Coolant Refill • Coolant Cleaning System • Water Cooling • Cooling Water Temperature: 22 °C • Cooling Water Flow Rate: 800 l/h Chip Management • Scraper-Type Chip Conveyor • Chip Conveyor Discharge Height: < 1,150 mm • Dry Machining Ready • MMS (Minimum Quantity Lubrication) Compatible Electrical Data • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V DC • Connected Load: 150 kW Additional Features • Automatic Workpiece Loading Interface • Automatic Tool Changer • Closed Machine Enclosure • Machine Lighting • Pneumatic Equipment • Energy Monitoring System • Automatic Media Connections • Modular Machine Design Additional Information • Motor Spindle 11 replaced in Week 19/2024 • Motor Spindle 12 replaced in Week 24/2023 Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis PELCO MECCANICA CLOUD was manufactured in 2015. It features a working area of 2000 × 1000 mm and a Z-axis travel of 250 mm. The machine is equipped with a 12-position tool changer and an electrospindle speed ranging from 2000 to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the PELCO MECCANICA CLOUD CNC router we have for sale. Contact us for further details. Dsdpozug Egjfx Aptjkt • Suitable materials: wood, PVC, plexiglass, polycarbonate, polymers, high-density polyurethane (model making), soft metals • Applications: fast interpolations ideal for 3D machining, cutting, shaping • Feed rate (interpolated): 10 m/min • Tool changer: 12 positions, ISO20 • Electrospindle speed: 2000–18,000 rpm • Controls: handwheel for precise positioning; handwheel for feed rate adjustment during machining • Coolant: prepared for mist cooling system (unit not included) • Certification/year: CE, 2015 • Power supply: 400 V, 3-phase + neutral • Power consumption: 3.5 kW • Compressed air requirement: minimum 6 bar Additional equipment • Tool length preset probe • Chip collection tray/conveyor under the table with extraction outlet

Condition: new, Year of construction: 2026, Key features 5 functions in one machine Straightening width: 400 mm Sealing width: 400 mm Max. sealing height: 220 mm Saw blade diameter: 300 mm Cutting height: up to 100 mm (90°) Saw blade tilt: 0–45° Sliding table: 1800 mm Router: spindle Ø30 mm, 4 speeds Drill (mortiser): chuck 16 mm Motor: 3 × 3.0 kW (option 3 × 4.0 kW) Power supply: 380 V Weight: approx. 645 kg Advantages Robust cast iron construction Precise aluminum sliding table Fast function change High processing accuracy Suitable for professional woodworking shops Reliable operation with minimal maintenance Dodpfx Aszl Nz Ssptskt

Condition: used, Year of construction: 1995, Second-hand machine Year of manufacture: 1995 Features and technical specifications: Versatile copy router with extremely short set-up times, both when switching from manual work steps for automated operations, as well as when switching between a wide variety of automated machining processes The automatic stencil feed (consisting of a central copying roller and a pressure roller) was manufactured by SCM Designed to automatically feed workpieces secured to a jig past the milling tool The automatic copy roller and pressure roller can be removed in a matter of seconds. This means that the machine Available for one-off and custom-made items produced by hand Distance between tool axis and column: 915 mm Spindle stroke 105 mm Table stroke 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed 10,000/20,000 rpm Table dimensions with extensions 1510 x 1170 mm Dsdpfjzk N Nysx Aptskt Motor power 4 kW Motor power for template feed: 0.14 kW Stencil feed speed 1.5–12 m/min Number of adjustable turret depth stops: 6 Dimensions approx. 1690 x 1100 x 1890 mm Weight 650 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 The T 110 is SCM’s table router, offering an ideal combination of quality and an affordable purchase price The structure is extremely sturdy For ease of use, all controls are within easy reach on the front of the machine Precise height adjustment of the tool is ensured by a mechanical indicator Spindle tilt from -5 to +45 degrees Table size 1000 x 750 mm Spindle clamping length: 140 mm Spindle overhang from the table: 20 mm Spindle speeds 3,000–4,500–6,000–9,000–10,000 rpm Max. diameter of the tool that can be lowered beneath the table: 320 x 40 mm Profiling tool, max. 250 mm Motor 4 kW Extraction nozzle 120 mm with 3-roller feed mechanism Dkedpfx Apozk N Rdstst Weight 520 kg Availability: at short notice Storage location: Röllbach

Condition: used, Technical specifications: Max. saw blade diameter: 300 mm Dkodpfezik Diox Aptot Min. saw blade diameter: 100 mm Saw blade arbor diameter: 25 mm Router bit arbor diameter: 35 mm Router bit arbor height: 120 mm Manual feed adjustment for the arbor and saw blade Table length: 1400 mm Manual clamping device Separate motor for the arbor and saw blade Power supply: 400 V Overall dimensions: Length: 1950 mm Width: 1000 mm Height: 1250 mm

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation - Special ball bearings for high-speed operation - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h - Airflow rate at the router fence: 1,060 m³/h Dodpfozr Rq Isx Aptokt - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) Djdpfx Asttakhoptskt - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: used, functionality: fully functional, WEINIG Profimat 14/6 Four-Sided Planer Dsdpfxjzd Tmve Aptekt Specifications: • Condition - used, after technical inspection, has defects • Manufacturer - WEINIG • Model - Profimat 14/6 • Working width 140 mm • Working height 120 mm • The machine has 6 spindles with a diameter of 35 mm • Spindle motors - 5 x 3.0 kW (separate for each head) and 1 x 7.5 kW (burnt out) • Total power 24 kW • Electric adjustment of planing height from the control panel and at the end of the machine, at the 6th head • Manual adjustment of planing width • Possibility of adjusting the vertical spindles up/down (as in an up-cutting router) • Infeed gear before the first head • Pressure from spring-loaded feed rollers • Infeed table with a length of 200 cm and a width of 20 cm • Smooth speed adjustment on a variator • Several profile cutters and wrenches included • Overall dimensions 440 x 140 x 155 cm (L x W x H) Additional information: • The machine has one burnt-out motor (the price takes this defect into account), but the remaining spindles and functions of the machine can be checked on-site • The machine shows signs of wear, but its solid construction ensures it will last for many years • The photos show the actual condition of the item for sale • Possibility to switch on and test the machine on-site • Free training on how to operate the machine (at the company's headquarters) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We organize transport with the MDD fleet, courier companies or external carriers • We can provide financial support in the form of leasing or a leasing loan

Condition: used, Year of construction: 1985, Second-hand machine Year of manufacture: 1985 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Weight: 420 kg Availability: at short notice Location: Röllbach Dksdpfszk N A Tsx Aptjt

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 1984 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Djdozk Nuvepfx Aptokt Dimensions: 140x88x160 Weight: 420 kg Availability: at short notice Location: DE-63934 Röllbach

Condition: used, Year of construction: 1982, Second-hand machine Condition: good Features and technical specifications: Cutting length (mm): 3,100 Cutting height (mm): 45 Saw blade diameter (mm): 180 Dkodpfx Apszk Nvtetet Depth to stop (mm): 500 Main motor: 1.8 kW Pneumatic clamp Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: at short notice

Condition: excellent (used), functionality: fully functional, Kitchen Worktop Router FG 314-2 - with overhead router HM / 18 Scheer - Milling length: 900 mm - Milling depth: 0–90 mm - Complete with template - Weight approx. 21 kg - 2000 watts Dkedpfox R Efgjx Aptot - 7 kg - Speed: 10,000 – 18,000 rpm Transport available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.