Used Schröder-Fasti 114 for sale (817)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Schröder Hamax 800 year of construction 2006. HAMAX 800 whole muscle stuffer is automatic filling of fresh (for example, as restructured meat) or cured meat parts/pieces of meat (for example, as raw and cooked cured meat) in artificial casings. The fundamental principle of the machine is based on a hydraulically driven piston that presses the meat into the casings. The HAMAX 800 whole muscle stuffer forms the technical requirement for increasing the efficiency in the production of sliced goods which are calibrated in length and thickness. In combination with an automated double clipping-machine, swift and efficient processing can be reached, which was previously very time-consuming for these products. The combination of the whole muscle stuffer and the integrated cutting system is the innovative factor. This affects the exact portioning of pork loins with tendon. Rodpfxjxrnkfs Akwju 2x filling pipes including 95 mm & 125 mm. Capacity up to 1200 kg / hour.

Year of construction: 1975, condition: good (used), strip width: 200 - 1.650 mm strip thickness: 0,6 - 3 mm coil weight: 7,5 t Rjdpfed Ha E Asx Akwju mandrel Ø: 508/610 mm

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm strip thickness: 0,4 - 2 mm coil weight: 7,5 t Rodpfxsgnc H De Akwou mandrel Ø: 508/610 mm

Condition: not inspected (used), Schröder double-jacketed pressure tumbler, steam tumbler, heat tumbler, 2500 liters Preheating or thawing of meat possible For heating, the tumbler must be connected to a steam generator Water vacuum pump Machine is offered as shown in the photo. Rodpowg H D Njfx Akwju All cables are labeled, which simplifies electrical connection. The machine was in operation until the last day and had to be dismantled due to its width. It was disassembled by the sausage manufacturer's in-house technician, and all electrical cables were numbered. The machine was dismantled in working condition. We have not reassembled or tested the machine.

Condition: good (used), electric clutch, electromagnetic clutch for guillotine shear, sheet metal shear, sheet metal guillotine shear, crank guillotine shear, eccentric press -for: Crank-operated guillotine shears -Equipment: Coupling, transformer, control unit -Manufacturer: LABOD electronic Rodpfx Aksb A I Uiswju -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg

Condition: good (used), Hydraulic guillotine shear (used) Manufacturer: Fasti Type: TCHE 254 Max. cutting length: 2540 mm Max. sheet thickness (ST 45): 4.0 mm Distance between side frames: 2540 mm Backgauge adjustable: 0 – 1000 mm Hold-downs: 14 units Motor power: 6.5 kW Machine weight: 3400 kg Required floor space: Width 2950 mm, Depth 2700 mm, Height 1900 mm Foot switch Angle gauge Front support arms Motorized backgauge Cutting edge illumination Digital display for backgauge The machine is in very well-maintained condition and ready for immediate use Forklift on site, free loading onto truck Inexpensive shipping possible Machine location: 48477 Hörstel Rjdpjyrhfwefx Akweu

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Rsdpfxexn Dhlo Akweu Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: used, Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment knife sharpened Rjdpsvmz Nbsfx Akwsu Weight: approx. 6500 kg

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall. Rodpfxjum Ttzj Akwou

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST Rsdpfx Akexaa I Sswou plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Redpfx Aexabd Uskweu Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Redpfxeu Rimme Akwsu Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: excellent (used), sheet width 1270 mm plate thickness 1.75 mm ST plate thickness 2.00 mm ALU plate thickness 2.50 mm KU Rsdexaa S Djpfx Akwou thickness at "Niro-steel" 0.80 mm distance between columns 1300 mm daylight opening OW ~ 380 mm work height max. 900 mm adjustment UW 60.0 mm bending angle max. 180 ° weight ca. 200 kg kg range L-W-H 2000 x 520 x 1500 mm good condition (!!) Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : ?machineno=1008-9355182

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper cheek stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail in top condition Redpfxjx Ebt Tj Akwju Manual backgauge with spring fingers 4000 kg

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Top roller diameter: 200 mm Right and left rotation via foot switch Rsdpfxoxwyfrj Akweu Safety rope pull switch Conical rounding possible Motorized rear roller delivery Lower roller adjustment via handwheel with position indicator Weight: approx. 4,500 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Motorized upper beam adjustment via foot switch Redpfsf Nwmzox Akwju

Condition: used, Max. bending length: 1270 mm Max. sheet thickness: 1.75 mm steel Motorized upper beam adjustment via foot switch Manual backgauge Redpfsxn Iwdex Akweu

Condition: used, Max. bending length: 1500 mm Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via limit switch Manual backgauge Redpfsudqd Rsx Akwju Weight: approx. 1000 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Rodpfx Aoxz Emvokwou Weight: approx. 2300 kg

Condition: used, Year of construction: 2000, Max. bending length: 3240 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Redpow R Uiasfx Akwsu Program control via touchscreen (backgauge, bending angle adjustment, upper beam stroke, sheet thickness, quantity, etc.) Motorized height adjustment of the bending beam (adjustment of the sheet thickness) Manual and automatic mode possible Controlled backgauge with spring fingers Central lubrication Various additional bending and reinforcement rails operation manual 5700 kg

Condition: good (used), Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Quantity: 5x punches -Max. width: 1000 mm -Tool built-in: 8x45 mm Rsdpfsb A I Ibjx Akweu -Distance between punches: 187 mm -powered: electric -Weight: 280 kg

Condition: good (used), Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Division: 8 x punch pairs with a spacing of 60 mm (Ø 4 mm) -Distance between the two outer pairs of punches: 975 mm Rsdpfx Akeb A I I Tswou -Spacing: 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. passage width: 1000 mm -Drive: electric -Weight: 260 kg

Condition: used, Year of construction: 1997, sheet width 2540 mm plate thickness 3 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm Redpfex Harmjx Akwsu daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories and PLC control made by Alba.

Condition: used, Year of construction: 1983, sheet width 2540 mm Rjdpfjw H Dkaox Akwou plate thickness 2 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories.

Condition: excellent (used), Hydraulic folding machine by Schröder Group, model SCHRODER-FASTI 215-40-4 A proven, robust industrial machine for precise bending, folding, and profiling of sheet metal. Despite its age, the machine operates flawlessly, delivering precise and clean results. Technical Data Machine type: Folding machine / hydraulic shear & folding machine Manufacturer: SCHRODER-FASTI Model: 215-40-4 Control: FASTI-matik 4000 (CNC) Max. sheet thickness: 4 mm (at 400 N/mm²) Working length / reference dimension: approx. 2,000 mm Stroke of upper beam: 350 mm Motorized adjustment of bending beam: 80 mm Motorized adjustment of lower beam: 80 mm Rsdpeygv S Uefx Akwou Motor power for adjustments: 0.75 kW Features - Motorized adjustment of bending and clamping beams - High clamping pressure speed - Robust, adjustable bending options - FASTI-matik 4000 CNC control - Segmented/finger rails Tools / rails: Flat rail: 18 mm Medium rail: 45° Reinforcing rail: 36 mm Finger size: 150 mm - High repeat accuracy - Fast setup times - Proven FASTI quality "Made in Germany" Condition: Used Technically tested, fully functional, and ready for immediate use Delivery time: immediate Shipping terms: ex works, loaded free of charge Loading: possible by forklift or crane Transport / forwarding: can be arranged