Used Schuko Förderschnecke for sale (151)

Condition: used, mileage: 17,700 km, power: 100 kW (135.96 HP), first registration: 10/2021, fuel type: electric, overall weight: 2,390 kg, color: white, gearing type: automatic, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Special Equipment: Driver/Passenger Airbag Towbar Preparation Multimedia Audio System Floor Covering: Luggage/Cargo Area (Wood) Front Power Windows with Pinch Protection Dcedpoy Evdisfx Ai Tjh LED Cargo Area Lighting Rearview Camera Visibility Package Steel Wheels 6.5x16 Additional Equipment: Driver Airbag, Audio Controls on Steering Wheel, DAB Tuner (Digital Radio Reception), Electric Vehicle, Electric Motor 100 kW (cont. 57 kW), Driver Assistance System: Hill Start Assist (HSA), Rear Wing Doors without Glazing, Body/Configuration: Panel Van, Charging Cable with Schuko Plug (Mode 2), Full Bulkhead, On-Board Charger (11 kW), Rear Parking Pilot System, Wheel Hub Covers, Wheelbase 2785 mm, Halogen Headlights, Right Sliding Door, Driver’s Seat with 6-Way Adjustment

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration Djdpjwugczefx Ai Tech 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 177 kg, fuel type: gasoline, color: yellow, power: 13.5 kW (18.35 HP), output current: 16 A, Wacker Neuson GS 12 AI Generator NEW Wacker Neuson GS 12 AI Generator – NEW | Continuous output: 5.0 to 9.4 kVA | 12 kW Honda petrol engine | Electric start | 230 / 400 V voltage | incl. trolley frame | Operating weight: 177 kg Item number: 5000620317 Technical Specifications: Manufacturer: Wacker Neuson Model: GS 12 AI Condition: NEW Operating Weight: 177 kg Continuous Output: 5.0 to 9.4 kVA Engine: Honda GX 630 petrol engine Engine Power: 12 kW Starting System: Electric Voltage: 230 V / 400 V Connections: 2 x Schuko 230 V / 16 A, 1 x CEE 230 V / 16 A, 1 x CEE 400 V / 16 A, 1~ CEE 7/3 Special feature: Incl. trolley frame Highlights & Features: - Powerful generator – ideal for construction sites & industry - Robust Honda engine – reliable & easy to maintain - Electric start – convenient & fast - Integrated chassis – mobile & versatile - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Construction site supply & trades ✓ Events & temporary power supply ✓ Agriculture & municipal operations ✓ Workshop & emergency power supply ✓ Commercial use Location: Warehouse D-46514 Schermbeck (NRW) – Inspection and collection possible Delivery: Germany-wide & international upon request Pricing: ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded Dodpfx Aiszaqche Tsch Other models and sizes available! Also in stock: GV 7003 A etc. ➡️ New & used machines, accessories & spare parts Buy a Wacker Neuson Generator | GS 12 AI NEW | 12 kW petrol generator | Construction site generator with 400/230 V | Honda GX 630 engine | Wacker Neuson quality Your reliable partner for generators & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! A virtual inspection of the machine via video call is available on request.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2792.28 € 10 mm B 16 220 mm 250 - 3000 U/min 0,45 kW 320 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.410 with intermediate table and table height adjustment via toothed rack OPTIONS: Dcodpfjy Hf Rzjx Ai Teh Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2625.31 € 10 mm B 16 220 mm 60 - 6000 U/min 0,54 kW 350 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug Djdpey Hf Rnofx Ai Tsch 3 years warranty for single shift Operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Dodpfxjy Hf Rho Ai Toch Deutschland 3303.85 € 6 mm B 12 220 mm 100 - 10000 U/min 0,54 kW M5 452 mm 700 mm 1130 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 6/8 (in E335/ST60) Drilling capacity / normal drilling performance Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, input voltage: 230 V, type of input current: AC, volume flow: 1.6 m³/h, total height: 20,000 mm, total length: 5,500 mm, total width: 6,600 mm, overall weight: 130 kg, Equipment: type plate available, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Dcodpfeq Sttcsx Ai Tjh Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Weight: 130 kg Manu´facturer: ISI: Industrieprodukte Scope of delivery: 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Condition: new, Year of construction: 2026, Standard equipment: Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob EMERGENCY STOP button Thermal overload protection Spindle stop Drill protection with electric. Protection Connection cable with Schuko plug 3-year guarantee for single-shift operationContinuous/normal drilling performance (mm) 6/8 (in E335/ST60) Thread cutting performance (depending on pitch) M5 Spindle B12 drilling depth (mm) 60 Thrust (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), distance (mm), width dimension (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Dcsdpfovupt Dsx Ai Tsh Drill depth stop stop ring (positive locking) Drill depth display digital Speed display digital Motor three-phase - frequency-controlled, mains connection 230 V (kW) 0.54 Spindle speeds continuously variable (1/min) 100 – 10000 Spindle/work surface (mm) 140 – 315 Machine dimensions with packaging (mm) 452 x 700 x 1,130 Machine dimensions without packaging (mm) 320 x 520 x 820 Weight (kg) 44 Optional accessories: Precision keyless chuck for Turbo Dril (0.5-6 mm), B 12: €160 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Large 3-phase gasoline generator on wheels Professional power station for you with a great need for backup for your home in the event of a power cut, or for the tradesman who needs many hours of continuous operation with high performance. The generator delivers a maximum output of 6.6 kW, has a large 25-liter tank and 2 x 230 V sockets with IP44-approved Schuko plugs and 1x 400 V CEE plug (16 A). The functional emergency power system runs on unleaded gasoline and has both an electric start and a reversing starter, terminal for earthing the generator, oil alarm, overload protection and VFT meter (displays volts, frequency and hours). The gasoline generator has an operating time of 7 hours at full load and 13.5 hours at 50% load and can be used for power tools, lighting and larger electrically powered products such as an electric radiator or water heater. The Ford generator is built to last - BUILT TOUGH as Ford describes it - and the long operating time, large 25 liter tank and built-in oil alarm mean you don't have to constantly check that the generator is running as it should. Manufacturer / Brand: Ford Model. No.: FGT9250E Voltage: AC 230V/400V AC current: 10.8A Power class: G1 Continuous power: 6000W MAX power: 6500W Frequency: 50Hz Tank capacity: 25L Oil volume: 0.6 liters Power factor 0.8 Revolutions per minute: 300 min-1 Maximum altitude: 1000m Maximum ambient temperature: 40°C Protection class: IP23M Engine: 420 ccm, 4-stroke, air-cooled Operating time v/max load: 7 hours Starting method: Reverse start & electric start Battery: 12V 9Ah Dedpfxjuziaus Ai Tech Dimensions: H70 x L70 x W50 cm Weight: 70 kg Manufacturer price: 1.899,00 € You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Bäko LF68 Storage Freezer Deep freezer for trays 600 x 800 mm Stainless steel construction Temperature adjustable from -15 to -25°C Freezer is ready to plug in Storage freezer Refrigerant R 134a Dcsdpfx Aiey Ik D No Tsh Connection 230V, with Schuko plug Used unit We have more freezers in stock!

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Discount: You get a 20% discount on this item -Soundproofed: 91 dB -Power: 7.0 kVA 50 Hz -Petrol engine: Honda -2x: Schuko 230 Volt Dsdpecgan Aofx Ai Tech -1x: 380 Volt power outlet -1x: Charging cable, 12-volt socket -Dimensions of unit: 590/780/H750 mm -Weight: 136 kg

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-30B-SA, overall weight: 785 kg, fuel type: diesel, tank capacity: 100 l, color: green, power: 30.16 kW (41.01 HP), output current: 44 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 26 kW (35.35 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 1,800 mm, total width: 850 mm, total height: 1,275 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin, type of cooling: water, In stock at Agregaat.store/Van Delft Staal, ENERGY dealer. ENERGY INDUSTRIAL GENERATOR SET MODEL EY-30B-SA, 30 kVA PRP, 33 kVA LTP, 400/230 V THREE-PHASE, 50 Hz, 1500 RPM. CONFIGURATION: DIESEL ENGINE BAUDOUIN 4M06G35/5 Djdpey S T Tbsfx Ai Tjch LINZ ALTERNATOR PRO18S C/4 WITH AVR WEATHER- AND SOUND-PROOF GREEN HOUSING RAL6017. ROOF, BASE FRAME AND PANELS GRAY RAL7012. AUTOMATIC MAINS FAILURE PANEL (AMF), DEEPSEA DSE4520 CONTROL PANEL, BATTERY CHARGER AND SOCKET SET: 1 x CEE 400V 5P 63A 1 x CEE 400V 5P 16A 1 x CEE 230V 3P 16A 1 x SCHUKO 230V CIRCUIT BREAKER FOR EACH SOCKET GENERAL DIFFERENTIAL CIRCUIT BREAKER TYPE "A" QUICK CONNECTION FOR ATS OPTIONAL ATS CONTROL CABINET Ready for start-up 1-year warranty

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-33Y-SA, overall weight: 1,000 kg, fuel type: diesel, tank capacity: 120 l, color: green, power: 32.07 kW (43.60 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 29 kW (39.43 HP), nominal power (apparent): 36 kVA, continuous power: 26.4 kW (35.89 HP), continuous power (apparent): 33 kVA, total length: 2,400 mm, total width: 924 mm, total height: 1,490 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, In stock at AGGREGAAT.STORE/VAN DELFT STAAL Dealer of ENERGY Power for life INDUSTRIAL GENERATOR SET MODEL EY-33Y-SA, 33 kVA PRP, 36.3 kVA LTP, 400/230 V THREE-PHASE, 50 Hz, 1500 RPM. CONFIGURATION: - DIESEL ENGINE YANMAR 4TNV98C-IYE (STAGE V) - LINZ ALTERNATOR MODEL PRO18M D/4 C WITH AVR - WEATHER- AND SOUND-PROOF HOUSING, GREEN RAL6017. ROOF, BASE FRAME AND PANELS, GREY Dedpoy S T Aisfx Ai Tjch RAL7012. AUTOMATIC PANEL (AMF) WITH BATTERY CHARGER AND COMAP AMF8 CONTROL BOARD, WITH SOCKET SET: - 1 x CEE 400V 5P 63A - 1 x CEE 400V 5P 16A - 1 x CEE 230V 3P 16A - 1 x SCHUKO 230V - MAGNETOTHERMAL SWITCH FOR EACH SOCKET If in stock, our items can be collected directly from our location in Nieuwkuijk. Would you prefer to have your items delivered? No problem! We deliver throughout the Netherlands. As a family-owned business, we value personal contact. We offer short communication lines, a customer-focused approach, and tailored advice. Since our establishment in 1975, we have been continuously expanding our business and are characterized by: More than 50 years of experience In stock! 1 year warranty Also for all your maintenance and repair needs.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-30Y-SA Yanmar, overall weight: 890 kg, fuel type: diesel, tank capacity: 90 l, color: green, power: 30.16 kW (41.01 HP), output current: 43 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 26 kW (35.35 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 2,000 mm, total width: 850 mm, total height: 1,275 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, Aggregaat.store/Van Delft Staal, Dealer of ENERGY Power for Life Generator set for industrial use, model EY-30Y-SA Electrical power 30 kVA, 24 kW PRP; 33 kVA, 26.4 kW LTP, 400/230 V three-phase, 50 Hz, 1500 rpm. Configuration: Diesel engine Yanmar 4TNV98-IGECS (Stage IIIA) Automatic Voltage Regulator (AVR) Design with weather- and sound-proof enclosure, fuel tank, fuel leak protection tray, and muffler (sound level 70 dB +/- 3 at 7 meters) Automatic Mains Failure (AMF) panel with complete power connection box, circuit breaker, battery charger, and electronic circuit board. Without automatic transfer switch (ATS). EY-30Y-SA - Datasheet Set with 4 sockets + residual current device (RCD) for generator sets from 30 kVA to 45 kVA Set with 4 sockets + residual current device (RCD) for industrial series generator sets from 30 kVA to 45 kVA KIT 4 PRESE (30-45kVA) - Datasheet Socket kit including (standard version): - 1 x CEE 400V 5P 63A - 1 x CEE 400V 5P 16A - 1 x CEE 230V 3P 16A - 1 x Schuko 230V - Circuit breaker for each socket - General residual current device (RCD) ATS automatic transfer switch for an off-grid system, and automatic switching during power outages. ATS 45A model ATS-31, ATS connector ATS 45A three-phase, 23kVA to 31kVA If in stock, our items can be picked up directly from our location in Nieuwkuijk. Would you prefer to have your items delivered? That is possible! We deliver throughout the Netherlands. Dedpfxjy S Th So Ai Toch As a family-owned business, we value personal contact. Short lines of communication, a customer-focused approach, and appropriate advice. Since our founding in 1975, we have been working on further expanding our company, and we are characterized by: More than 50 years of experience Personal advice for your projects Large stock with fast delivery times We ensure that all generators are ready to start and operate. 1 year warranty.

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dsdpfey D Adtsx Ai Tjch Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: Protection class IP21, MeccALte Start type: electric Generator with AVR control Dimensions and weight: Dcsdpoq A T Eusfx Ai Tsh Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg Key start Sockets: 1 x 32 A 400 V 1 x 16 A - 400 V 1 x 230 V Schuko 2 x 16 A 230 V CEE

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 05/2028, total length: 825 mm, total width: 520 mm, total height: 1,010 mm, input frequency: 50 Hz, power: 2.2 kW (2.99 HP), electrical fuse: 16 A, Spiral kneader Model: ECO 24 Kneading machine with sophisticated and robust technology! LED control Dough machine with 2 timers 2 courses in 10 steps for min/max. 3 to 24 kg of dough Flour dust hood Stainless steel boiler and spiral Machine mobile with 4 brakes DGUV V3 tested Connection 220V, 2.2 kW, Schuko plug Dimensions: 520 x 825 x 1010mm, WxDxH NEW machine With a 24 month warranty Come to us and see over 400 bakery machines! Djdpfsn Si S Tjx Ai Tjch

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1781.01 € 10 mm B 16 180 mm 250 - 3000 U/min 0,45 kW 400 mm 248 mm 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Djdpfoynmz Nox Ai Tsch Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, Year of construction: 2025, neu 2025 030138 Dcjdpfx Aoxcbhrei Tsh prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500)

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit Dcodpfxjm Nclve Ai Tsh clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: ready for operation (used), Year of construction: 1991, Used strip cutting line consisting of: Alphamatic vacuum feeding system with 4 roller conveyors Feeder to the crosscut saw Crosscut saw with vacuum workpiece clamping Conveyor to the rip saw Rip saw Manufacturer: Holzma Model: HPP81-3200 Year of manufacture: 1991 Discharge conveyor Longitudinal roller conveyor with length measurement REA JET automatic labeling system Shredder Brand: Schuko Type: 6M900K Year of manufacture: 2017 Technical specifications - 18.5 kW Belt conveyor system Brand: Kraft Year of manufacture: 2018 Technical specifications - Consists of 13 individual belt conveyors - Conveyor length: 3000 mm each - Belt width: approx. 580 mm - 3 of the 13 conveyors are swing-out Scissor lift table Year of manufacture: 2005 Technical specifications - Load capacity: approx. 1000 kg Edge processing machine Brand: Hebrock Type: AKV2001F Djdpfx Aisy Drgwj Tech Year of manufacture: 2000 Technical specifications - With scrapers and brush unit on a chassis Tilting skip Brand: Bauer Type: WU-R 750 Year of manufacture: 1991 Used strip cutting lineconsisting of:Alphamatic vacuum feeding system with 4 roller conveyorsFeeder to the crosscut sawCrosscut saw with vacuum workpiece clampingConveyor to the rip sawRip sawManufacturer: HolzmaModel: HPP81-3200Year of manufacture: 1991Discharge conveyorLongitudinal roller conveyor with length measurementREA JET automatic labeling systemShredderBrand: SchukoType: 6M900KYear of manufacture: 2017Technical specifications- 18.5 kWBelt conveyor systemBrand: KraftYear of manufacture: 2018Technical specifications- Consists of 13 individual belt conveyors- Conveyor length: 3000 mm each- Belt width: approx. 580 mm- 3 of the 13 conveyors are swing-outScissor lift tableYear of manufacture: 2005Technical specifications- Load capacity: approx. 1000 kgEdge processing machineBrand: HebrockType: AKV2001FYear of manufacture: 2000Technical specifications- With scrapers and brush unit on a chassisTilting skipBrand: BauerType: WU-R 750Year of manufacture: 1991Note:The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm Dedpjx D Rlpsfx Ai Tjch • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 4758.02 € 18 mm MK 2 240 mm Dedpfx Aisynm Aae Toch 30 - 3000 U/min M12 355 mm 705 mm 1065 mm 170 kg 100 mm 155 - 415 mm 155 - 550 mm 340 x 280 mm 82 mm Continuous/normal drilling performance 18/20 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Coolant device LED lighting with pivot arm Drill package 3 (vice & keyless chuck)

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GWB 22 Y CDS Noise protection hood: 64 dB(A) 7m Continuous power: 18.4 kVA / 14.45 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Yanmar 4TNV88 BIPGE Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 2190 cm³ Intake: Normal Dcodpfsq A U Axox Ai Tsh Engine speed: 1500 rpm Engine control: Mechanical Electric start Consumption at 3/4 load: 3.87 liters Consumption at full load: 5.17 l/h Generator: MeccAlte ECP28-M/4 or equivalent Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Manual control panel: Key start Voltmeter, ammeter, operating hours counter, Motor fault display Sockets: 1 x Schuko 220V 2 x CEE 16A -230V 1 x CEE 16A -400V 1 x CEE 32A -400V Dimensions: Length: 1645 mm Width: 870 mm Height: 1072 mm Tank capacity: 51 liters Weight: approx. 560 kg Crane eye Forklift can be driven under

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN Dcsdpfx Aiey Aktms Tjh distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG