Used Sharpening Machine For Band Saw Blades for sale (69,344)

Condition: good (used), Year of construction: 1992, Bandsaw automation machine, manufacturer JAESPA, type: W400 AZ Hodpfx Abegf H Saohenp Control system: Minipos 807, year of manufacture: 1992 Cutting diameter for round material: max. 400 mm Saw blade length: 5500 x 32 x 1.1 mm Feed: automatic, section length: min. 20 mm Chip conveyor Total power consumption: 4 kW Weight: approx. 2500 kg Accessories: 2 saw blades, roller conveyor 6 m, motorized drive, machine documentation available. Space requirement: 2.8 x 2.8 x 2 m

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Hnsdpfsy Nuhnsx Abhep Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: good (used), Year of construction: 2018, machine/vehicle number: 431-92, Offer 26142 Technical data: - Cutting range at 90°: round 350 mm - Cutting range at 90°: flat 320 x 460 mm - Miter angle adjustable from 90° to 30° - Cutting range at 45°: round 280 mm - Cutting range at 45°: flat 350 x 280 mm - Cutting range at 45°: round 180 mm - Material feed system - Material support height approx. 740 mm - Saw band dimensions 4350 x 34 x 1.1 mm - Cutting speed adjustable from 25 to 90 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure continuously adjustable - Material clamping device - 3 roller conveyors, total length 1400 mm - 1 roller stand - Total motor power 400 V / 4.8 kW Hsdezc Izaopfx Abhsnp - Space requirement approx. W 1400 x H 1400 x D 2200 mm - Weight approx. 1900 kg

Condition: new, Bandsaw machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Condition: New machine Cutting capacity (round): 225 mm Cutting speed: 20 - 90 m/min Standard equipment includes: - Horizontal clamping device - Length stop - Automatic shut-off after the end of the cut - Chip removal brush - Coolant system - Operating manual Hnsdpfxodynpco Abhsp

Condition: ready for operation (used), Year of construction: 1952, functionality: fully functional, machine/vehicle number: Typ Cre, Saw blade sharpening machine – straight grinding – for circular saw blades with a diameter of 80 to 800 mm. A clamping device for band saw blades is available. The operating manual is also included. The machine is in working order and can be demonstrated. Hnsdpfxeza Tl Se Abhsp

Condition: new, Band saw blade Make Röntgen Type bi-alfa cobalt Dimensions :4860 x 34 x 1.1 mm Hedpfx Aborwl R Nohenp 3/4 Combi 10 unused, out of magazine

Condition: excellent (used), Frietsch SAWMILL MACHINERY Buying and selling KASTO sawing machines Dear Sir or Madam, We buy, sell, overhaul, repair, and repaint KASTO sawing machines. We have over 40 years of experience with KASTO sawing machines and have specialized in overhauling these machines. We can also handle KASTO control systems! The machines are overhauled by trained personnel according to KASTO factory standards. Hodpsfh Hukefx Abhenp We also source KASTO sawing machines according to your specifications for machine overhauls. Excellent price-performance ratio thanks to professional machine overhauls.

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º Hsdpfxjudi Uno Abhsnp ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Hnjdewqw Tvopfx Abhsp Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Year of construction: 1980, condition: excellent (used), I sell the saw blade and saw leaf sharpening machine Loroch G77, Made in Germany. Hnsdpeim Ea Dofx Abhsp

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Hnodpjy En E Ssfx Abhop Weight 151/202 kg MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Hjdpfxoudim Ds Abhonp Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Hnodpjmrp Tlofx Abhep Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 400V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Hnjdsy Emgbjpfx Abhsp Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Hjdpsi D Di Sjfx Abhenp Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Hnsdpewq A Dyofx Abhep CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 700x1000x1300 mm Weight 115 kg Hnedpsvz Hz Sjfx Abhjp Total power requirement 0,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Total power requirement 3 kw Hodpov A Hgdefx Abhonp

Condition: new, Year of construction: 2026, Width of the band swa blades 50-200 mm Sharpening pitch 60 mm Weight 750 kg WINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNC PNK-CNC is designed to grind all types of band saw blades used in metal cutting. PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technology Technical specifications: - Band saw width 50-200mm - Band saw length Max. 12m - Blade thickness Min 0.4mm - Tooth pitch Max. 60mm - Tooth depth Max. 30mm - Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°) - Feed rate (speed controlled) Max. 90 teeth/min. - Grinding wheel dimensions D: Ø250mm d:Ø20mm - Grinding wheel thickness 5-13mm (depending on tooth pitch) - CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm - CBN Grinding wheel thickness 2-3mm (depending on tooth pitch) - Grinding wheel rotation (speed controlled) 1400-5500 r.p.m. - Grinding wheel motor power 1,10kW - Coolant type Water emulsion(bakalite wheel) / Oil (CBN wheel) - Coolant motor capacity 70 lt/min. Coolant pressure 10 bars. Hsdeyk Icaspfx Abhenp - Coolant container capacity 80lt. Motor quantity 6 - Connected load 3,6kW - Voltage 400V, 3Ph, 50-60Hz - Dimensions 1550*2000*1550mm (saw blade unmounted) - Net/gross weight 750/800kg PNK-CNC at a glance: - 2 axes Servo motor controlled. - Operating screen in any language. (please state the required language in order) - Downloading a program through internet if demanded. - LCD screen control panel. - Language selection on the control panel. - Tooth form selection from the control panel. - Grinding all common tooth types. - Possibility of saving grinding programs of the blades ground. - Following the hook angle from the control panel. - Indexing by servo motor. - Absolute tooth pitch accuracy. - Variable grinding speed. - Variable grinding wheel rotation speed. - Grinding head riding on linear rails. - Optionally wet or dry grinding. - Grinding by CBN wheel or DIA wheel. - Water emulsion/oil coolant [for CBN grinding]. - Central lubrication. - Integrated light unit. - Separation of electronic and grinding areas. - Included band saw carrier legs. - Motor controlled band saw vertical movement. - Steady mechanic blade clamp. - Enclosed cabin for operator safety. - Ergonomic machine construction for ease of loading and unloading. - Simple controls for ease of use. - Rigid machine construction. - Production conformed with CE standards. OPTION: - full cover EUR 2.500,-

Condition: new, Year of construction: 2026, Sawblade width max. 120 mm Weight 350 kg Motor output 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding. Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80*120*175cm - Net/gross weight 350/375kg PNK-AB General Features: - Automatic grinding of band saw blades up to 120mm width. - Grinding wheel riding on linear rails. - Non-corroding and hardening plating on all mechanical components. - On/off switch. - Max 60mm tooth pitch. - Ease of use. - Minimum space required. - Fast and precise grinding of NV,PV and KV tooth forms. - Manual central lubrication. - Manual saw holder and blade lifting system. - Optional circular(HSS) and gang saw grinding attachments. - Production conformed with CE standards Capacity: Grinding up to 30 band saws per day. Optional supplements: - CBN Woodmizer wheel nett price EUR 375,- - Diamond wheel for Bimetal nett price EUR 520,- - Bakelite wheel 13mm nett price EUR 75,- - Ceramic wheel 16mm nett price EUR 115,- - CBN grinding wheel nett price EUR 1.125,- - Spare Index Finger nett price EUR 70, - Index finger pin nett price EUR 20,- - Wheel dresser attachment nett price EUR 1.170,- Hnodpfx Aeyk Ib Ajbhep - Wheel dresser diamond nett price EUR 100,- - Circular (HSS) saw grinding attachment nett price EUR 960,- - Frame saw grinding attachment nett price EUR 2.700,-/1meter - Coiler and uncoiler system for band saw manufacturers nett price EUR 5.800,- - Sealed packing nett price EUR 570,- - Attachment for double side saws nett price EUR 1.560,- - Pneumatic system for second indexing finger nett price EUR 1.140,- - CAM for GD tooth profile (WM) blades nett price EUR 330,-

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, The innovative flash butt welding machine for bandsaw and bimetal blades is developed entirely by our engineering department. It guarantees perfect welds and precise repeatability of the process. User friendly touch screen display from Schneider Electric that allows you to operate the machine effortlessly. The welding process is fully automatic, with the capability to adjust the electric current in 6 stages. The machine also allows for stepless regulation of electric current during annealing and pyrometric control throughout the welding process. The FBM10 is extremely easy to set up and cost-effective to maintain. Power supply voltage 400V Rated transformer capacity at 50% duty cycle 5kVA Frequency of electrical current 50HZ Clamping of the band saw blade Manual or Hydraulic clamping /Optional FBM 10.02/ Hnodpfexhf Dzex Abhop Annealing Manual or Automatic, with pyrometric control /Optional/ Menu language Bg / En / Possibility for welding: - band saw blades for wood mm 6÷60 - Bi-metal band saw blades mm 6÷54 - stainless steel band saw blades mm 6÷40 - band saw blades without teeth mm 6÷50 Weight: 197kg Dimensions: (length х width х height) mm 910 х 640 х 530

Condition: used, Manufacturer: KASTO Model: SSB 260 VA Hnedpfx Abexcnppehsp Max. cutting size: 260 x 260 mm / Diameter: 260 mm Weight: 1915 kg

Condition: new, Year of construction: 2026, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Hnjdpfx Abov R Tgtjhop Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: - Cutting range at 90° round: 220 mm Hjdpfxjy H Dmhe Abhsnp - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: new, Year of construction: 2026, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Hodpfx Abomtwktshenp Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 230V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.