Used Sisal Cloth Rag for sale (1,572)

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Nsdpfx Aomkixweqvjlb When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Nljdpfxsmhh Dtj Aqvob - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Nledpfeguk Dvex Aqveb Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Workpiece Clamping & Table: • Pallets according to DIN 55201, maximum load capacity 5,000 kg • Tilting moment: 50,000 Nm • Rotary table: 10 rpm, resolution 0.001°, tangential moment (clamped): 25,000 Nm Pallet & Tool Changer: • Automatic pallet changer for 3 pallets, changeover time 47 s • Automatic tool changer, chip-to-chip time: 13 s • Tool weight up to 15 kg • Drum magazine with 320 storage slots (4 drums), max. tool diameter 250 mm, max. length 450 mm, max. weight 35 kg Nlsdpfxsyzr Ayj Aqvsb Travel & Feed Rates: • Feed range: 1–40,000 mm/min • Rapid traverse: 40 m/min • Acceleration (x/y/z): 4 / 5 / 3 m/s² • Feed forces: max. 20 kN Main Spindle: • Spindle diameter: 100 mm • Speed range: 20–6,000 rpm (optional 10,000 rpm, 2-stage gearbox) • Tool interface: SK50 (DIN 69871), optional BT50 or HSK-A100 • Through-spindle coolant, max. 70 bar Coolant System: • Coolant unit with gravity fleece filter • Supply pressure: 10–70 bar, tank volume 3,400 l • Temperature stabilization and compensation for high precision • Optional: Sag and spindle expansion compensation, spindle warm-up program • Hinged belt chip conveyor (optional, with fleece or vacuum filter) • Connection to central coolant system possible Performance & Accuracy: • Continuous power consumption as per installation plan • Sound pressure level ≤ 80 dBA • Positioning accuracy (x/y/z): o Tp = 0.006 mm o Psmax = 0.005 mm o Umax = 0.004 mm General Data: • Net weight (complete): approx. 26,500 kg • Color scheme: Light grey RAL 7035 / Mouse grey RAL 7005 / Ruby red RAL 3003 • Operating voltage: 400 V / 50 Hz • Documentation in German language

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,150 h, travel distance X-axis: 650 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,500 W, number of slots in tool magazine: 80, number of axes: 4, This 4-axis Starrag Heckert HEC 400 D was manufactured in 2012. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 80 tools, allowing for efficient machining operations. The machine includes two workpiece pallets with a size of 400 × 500 mm. If you are looking to get high-quality machining capabilities, consider the Starrag Heckert HEC 400 D horizontal machining centre we have for sale. Contact us for further details. • Temperature range: 5–35 °C • Operating hours: 41,150 hours • NCU type: NCU 710.2 • NC software version: V02.07.01.06 • MMC software: 07.06.02.02 • Standard software cycles: 07.05.11 • Tool magazine type: Chain magazine • Workpiece pallets: 2 • Pallet size: 400 × 500 mm • Spindle torque: 200 Nm • Coolant pressure (option): up to 80 bar • Coolant tank capacity: 1350 l Nlodpfx Aqsyzn Dgsvob • Coolant flow (swivel shower): approx. 70 l/min • Axis measurement system: Heidenhain LC483 • Rotary axis measurement: Heidenhain RCN226 • Position frequency analysis X-axis: 29 Hz • Position frequency analysis Y-axis: 54 Hz • Position frequency analysis Z-axis: 52 Hz • Spindle + motor replaced: July 2025 Additional equipment • Vapour extractor: AFS 600 Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2010, FERAG station for loading printed products into the chain including 5690616 motor and 31232590 encoder year 2010 Nlsdov Sdhkopfx Aqvjb

Condition: refurbished (used), functionality: fully functional, -KOM 3180- Offered here is a fully overhauled motor spindle, type HSK-A-100, from Starrag Heckert AG. The spindle underwent comprehensive maintenance and testing in 2013 (test reports can be provided upon request). During inspection, no anomalies outside the tolerance range were identified. Furthermore, components such as seals, operational noise, and air circulation were thoroughly examined. The spindle is packed in a wooden crate and is ready for transport. The original purchase price of this spindle was approximately €80,000. Nedpfx Aqoy H Hydsvslb Technical specifications: Manufacturer: Starrag Heckert Type: HSK-A-100 Spindle type: Motor spindle Material: Metal Max. speed: 15,000 rpm Clamping force: 47 kN (target range: 45–55 kN)

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,300 mm, table load: 2,000 kg, Travel Paths Travel path X: 1450 mm (longitudinal) Travel path Y: 1100 mm (vertical) Travel path Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg Spindle & Drives NC rotary table with direct drive Positioning: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Nlsdpoy Idykofx Aqvob Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool Changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Accessories: - Coolant through spindle - Coolant shower - Tool breakage detection in tool changer - Spindle motor load monitoring - Spindle extension by 100 mm - Electronic handwheel - Various tools

Condition: used, Centerless grinding machine PARAGON RC16 Nljdpfx Aoxzu E Usqveb 200*400 G.W. through-feed grinding under power in our warehouse (see video)

Year of construction: 2018, condition: ready for operation (used), Comp Air screw compressor incl. refrigeration dryer Comp Air screw compressor L 06 5.5 kW Year of manufacture: 2018 10 bar Delivery rate: 0.67 m³/h Refrigeration dryer PT 9 Nlodpfsy Amknjx Aqvjb

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed Nlodsuq Iy Rspfx Aqveb

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, working width: 2,440 mm, welding power (max.): 1,200 kVA, wire diameter (max.): 12 mm, type of input current: AC, wire diameter (min.): 4 mm, Refurbished Schlatter MG903 - PG24 Nljdpoy D H T Eefx Aqvsb - Longitudinal wire inserter LFE - Longitudinal wire feeder LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mesh output MVL4.2 - Mesh stacker MS12 - Control and power cabinet - Siemens S7 TIA machine control Mesh width: 2450mm Wire: 4-12mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, welding power (max.): 420 kVA, wire diameter (max.): 8 mm, type of input current: AC, mesh size: 25 mm, working length: 4,000 mm, wire diameter (min.): 2 mm, Machine Profile: Schlatter MG900 PG12 The Schlatter MG900 is a high-performance, fully refurbished resistance welding line, specifically designed for the production of wire mesh panels. It can process wire diameters of up to 12 mm with a maximum mesh width of 1,250 mm and a length of up to 3,000 mm. The machine has undergone comprehensive modernization to ensure maximum efficiency and flexibility in production. Technical Specifications 1. Main Components: Longitudinal Wire Feeder LV - Upgraded to a high-precision servo axis. - Magazine feeders for wires up to 3,000 mm in length. MG12.4 Mesh Welding Machine - Fitted with 6 transformers. - Four (4) Schlatter welding presses, 5 kN each. - Machine upgraded to 12 welding presses. Cross Wire Feeder QFD34 - Allows double wire insertion for two different line wires. - Note: The second tier is not yet installed in the photos. Mesh Extraction MVL - Driven by MS2N servo motor with CtrlX by Bosch Rexroth. - Equipped with three Schlatter mesh grippers (expandable on request). Mesh Stacking Unit MS - Automatic stacking of mesh panels (travel distance 3,100 mm). Control and Power Cabinet - Siemens S7 TIA machine control system. - Rexroth CtrlX components for high-dynamic motion control. Nodpoy D Huijfx Aqvelb Longitudinal Wire Loader LFE - Not included, available on request. Special Features and Advantages: - Full Refurbishment: Machine has been completely overhauled and modernized, with warranty included. - Efficiency: Fully automated operations via mesh stacker and servo-driven longitudinal wire feeder. - Future-Proof: Equipped with the latest technologies and control components. Specification: - Mesh width (cross wire length): max. 1,250 mm / min. 200 mm - Mesh length, with manual loading: max. 3,200 mm / min. 300 mm - Maximum distance between outermost line wires: 1,200 mm - Longitudinal wire spacing: 25 – 150 mm - Cross wire spacing: min. 12.5 mm, infinitely programmable - Longitudinal wire diameter: 2.0 – 10.0 mm - Cross wire diameter: 2.0 – 8.0 mm - Maximum number of longitudinal wires: 24

Condition: good (used), Pressure reducer, pressure regulator Nodpfxjb A Nzfo Aqvelb -Type: D14100 -Connection -Inlet: max. 20 bar -Output: max. 10 mbar -Weight: 2.7 kg

Condition: ready for operation (used), * Brand: Dragon * Surface: 5000 x 1800 mm - 4 decks * Driving: E-motor 30 kW Nljdpfxsywm N To Aqvob * Incl.: springs with springsupport.

Condition: ready for operation (used), * Brand: Nordberg-Dragon * Type: 25/60-3.5 * Surface: 6000 mm x 2500 mm – 3,5 decks * Upper deck: screen opening [] 30 mm * Middle deck: screen opening [] 17 mm Nlodpfx Aeywmmfeqvob * Middle deck: screen opening [] 10 mm * Lower deck: screen opening [] 5 mm * Driving: 30 kW E-motor

Condition: good (used), Cantilever rack OHRA 3 m high Over 100 meters in stock, see pictures. Height: 3 m Nlodpfx Aqocd Dwyevob Arms: 100 cm Load capacity per arm: 800 kg 4.5 running meters, 4 uprights with arms. Negotiation price: €2,360 net Offer includes: - 4 uprights with base, each 3 m high - 4 adjustable arms per upright, each arm 100 cm, load capacity 800 kg/arm - Diagonal braces, stabilizers, and spacers included - Frame distance: 150 cm - Load capacity per upright/per side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m also available Other configurations available on request. Constant stock of over 3000 lfm pallet racking from various manufacturers. Transport and assembly available on request. (Technical data, specifications, and prices subject to change without notice. Intermediate sale reserved! See our general terms and conditions. All prices excl. VAT, ex stock.) Buying / Selling: We are constantly purchasing and offering numerous items from various sectors: - broom-clean business clearances - company liquidations - fast – flexible – effective! We also clear or dispose for insolvency administrators. Contact us with a brief description and we will get back to you promptly. To visit our page, please click on our logo!

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 3,300 mm, table width: 4,000 mm, overall weight: 15,000 kg, product length (max.): 4,850 mm, number of axes: 4, This 4-axis Starrag Heckert CWK500D was manufactured in 2002. It features an impressive X-axis travel of 750 mm, Y-axis travel of 750 mm, and Z-axis travel of 700 mm. The machine includes a robust pallet size of 500 × 500 mm and a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Starrag Heckert CWK500D horizontal machining centre we have for sale. Contact us for further details. • B-Axis: 360° continuous rotation (0.001° resolution), max speed 25 rpm; indexing time (90°) approx. 1.2 sec (rotary table completely overhauled by manufacturer FTW in 2022) • Rapid Traverse: 40 m/min • Pallet Size: 500 x 500 mm • Max Pallet Load (centered): 500 kg • Automatic Pallet Changer: 2 pallets with a pallet change time of approx. 9 sec • Tool Magazine (Chain Magazine): 80 tool positions • Max tool diameter: 160 mm (with free adjacent pockets) • Max tool diameter: 85 mm (with adjacent pockets occupied) • Max tool length: 400 mm • Max tool weight: 10 kg Nlsdpeynlcrjfx Aqvob • Spindle taper: HSK63 • Spindle Speed: up to 15000 rpm • Power: up to 37 kW • Torque: up to 350 Nm • Internal coolant supply (IKZ): 50 bar • Coolant system: Belt filter

Condition: ready for operation (used), functionality: fully functional, Several used radial fans are being offered here, including Siemens electric motors in various power ratings and sizes. The fans can be used for supply or exhaust air applications. They originate from a furnace system and are therefore heat-resistant. Currently, 5 fans are available for sale. 1x Alko Therm GmbH RZR 15-630 Siemens 1LA2186-4AA60-ZA11 22 kW / 1460 rpm (Sold) Nljdpsyrffbsfx Aqveb 1x Gebhardt Ventilatoren RZR 11-0560 LG/90 Siemens 1LA7163-4AA60 11 kW / 1460 rpm 1x Alko Therm GmbH RZR 15-710 Siemens 1LA2207-4AA60-ZA11 30 kW / 1465 rpm 1x Alko Therm GmbH RZR 15-710 Siemens - 1x Alko Therm GmbH RZR 15-0630 1x Gebhardt Ventilatoren RZR 11-0560 LG/90 Siemens 1LA7163-4AA60Z 11 kW / 1460 rpm Radial fan, centrifugal blower, centrifugal fan

Condition: used, functionality: fully functional, Packing machine for tuna and other fish. - Great convenience for the placement of fish. - Empty cans are fed from the air and full cans are discharged from a single lane. - Centralized fattening system Njdpfown Dqiox Aqvslb - Herfraga’ cutting quality: unbeatable packaging presentation. The most versatile. Cans be packed: - Round up to 100 to 150 mm diameter. - Oval (OL-240). - Rectangular (RR-725). - Maximum height: 120mm TECHNICAL CHARACTERISTICS: Production: up to 50 cans/minute maximum. (depending on the type of format) Diameters to be packed: 100-150 mm. Height of cans: max. 120mm. Shape of cans: round, oval or rectangular.

Condition: used, functionality: fully functional, Packing machine for tunafish and other fishes, classical model. Njdpfjwn Dnhjx Aqvslb MEASURES: -Large convenience for the fish position. -Moved by a motor-reducing of 4 HP, and equipped with an electronic converter to regulate the speed and other functions. -Equipped with a linear detector to regulate fish entry. -The empty cans feeding is airborne and the full cans exit is done by a unique track. -Centralize lubricated system. -The most versatile. -Cans to pack: -Rounds up to 100mm of diameter. -Oval (OL-120 adaptable to OL-240). -Rectangular (RR-125). -Maximum height: 62 mm. -Output: up to 200 cans/minute. -Recommended output: 150 to 180 cans/minute (according to the can type). -Diameter to pack: 50-100 mm. -Cans height: 25 - 62 mm. -Cans shape: circular, oval or rectangular.

Year of construction: 2004, condition: good (used), Built in: 2004 Equipment: Feeder Nedpfxsc U Syue Aqvelb

Year of construction: 2002, condition: good (used), Build in 2002 Njdod S Su Topfx Aqvolb

Year of construction: 2005, condition: used, Equipment Twin Multi Disc unwind station MTD-AWS-OWK Njdoc Ihxrepfx Aqvjlb • 2 MTD-AWS-OWK Combination unwinding station • 1 MTD-ZSF-LI-MSD Stack pacer LAT • 1 LAT-2:1

Year of construction: 2004, condition: ready for operation (used), Built in 2004 Size max 470 x 310 mm min 210 x 148 mm Speed max 90.000 Ex./h Nedpfjdygvzsx Aqvjlb