Used Skymaster Vm 2018 for sale (2,793)

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, working width: 550 mm, area performance: 2,475 m²/h, warranty duration: 12 months, water tank capacity: 40 l, empty load weight: 179 kg, TASKI SWINGO 955B SCRUBBER-DRYER NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW NEOS 24V 10A BATTERY CHARGER Year of manufacture: 2018 550mm cleaning head equipped with new medium-stiffness disc brushes, suitable for use on any surface. New polyurethane squeegee blades, resistant to contact with oils, greases, and petroleum-based substances. Wheel drive facilitates daily operation. Suction turbine ensures high-power water recovery from the squeegee assembly. Each machine we offer is photographed individually; you are purchasing the exact unit shown in the pictures. TECHNICAL DATA: Pgsdpe Aa I Htefx Airsu Supply voltage: 24 V Brush working width (mm): 550 Squeegee working width (mm): 800 Theoretical coverage (m²/h): 2475 Working speed (km/h): 4.5 Tank capacity (l): 40/40 Weight of the machine ready for operation (kg): ~179 Dimensions (L x W x H) (mm): 1180 x 800 x 1150 INCLUDED: NEW 12V 85Ah SIAP gel batteries (2x) NEW NEOS 24V 10A battery charger NEW 280mm disc brushes (2x) 24V 500W suction motor Suction hose + drain hose Squeegee assembly with new oil-resistant rubber blades Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 40-liter tank capacity allows for a large volume of cleaning solution, minimizing the need for frequent interruptions to refill. The machine’s design ensures excellent maneuverability; its small turning radius allows for operation even in narrow aisles and passageways. The parabolic squeegee assembly ensures thorough removal of the cleaning solution from the surface. A wide working path (550mm) ensures high surface coverage efficiency. Highly clear and intuitive control panel.

Condition: used, Year of construction: 2020, Technical details: dimensions of saw-band: 2.880 mm throat: 356 mm workpiece height: 205 mm max. table load: 150 kg table - inclinable: 12/15 li+re 8/8 vorn/hinten Grad band speed: 20 - 80 m/min table height: 990 mm Table dimensions: 500 x 500 mm motor capacity: 0,75 kW machine weight approx.: 275 kg dimension machine approx.LxWxH: 0,85 x 0,60 x 1,74 m - Integrated blade welding unit for saw blades up to 13 mm wide - Blade grinding and annealing device Pjdpfx Aj Af Hvkeirsgu - Cast iron worktable - Work area lighting - Blade tension and blade speed indicators - Chip blowing device - Rip fence *

Condition: used, Year of construction: 1997, machine/vehicle number: VM40027E, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 8,000 rpm, X-axis - 500mm, Y-axis - 550mm, Z-axis - 400mm. Speed 8000 rpm. CNC control - Seicos MYII Pgodpfx Aijvm Utmorsu

Condition: ready for operation (used), gate fold attachment Pedpfx Aeir A I Rsirogu

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system WINMAX DSM - Software version V09 Table size 1220 x 610 mm X-axis travel 1020 mm Y-axis travel 610 mm Z-axis travel 610 mm Spindle speed 10000 rpm Spindle taper SK40 Rapid traverses X/Y/Z = 35 / 35 / 30 m/min Tool magazine 24-station Main drive power 15 kW Machine weight approx. 6500 kg Dimensions 3200 x 2400 x 2650 mm Accessories, equipment - Chip conveyor - Electronic handwheel Podpez Rq Ddofx Airsgu - Coolant unit - 3D, DXF, pockets/islands, rigid tapping, helical interpolation, tool and material database, surface selection, realistic graphics, NCPP, ISNC, etc. - Manuals in PDF The machine was barelly used and is ready to buy.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, Simulation graphics, Pocket with islands, Psdpfx Aisy T Iwqjrsgu Synchronous tapping, Helix, 3D option, NC/dialog mix, Surface selection, Tool change optimization, Tool and material database, X-axis bearing likely defective.

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Ladies and Gentlemen, We hereby offer a Deckel FP1 3-axis active milling machine with retrofitted safety devices. These machines of the newer version have, among other things, central lubrication, an electric coolant pump and a brake motor. In addition, the control cabinet can be disconnected from the machine in no time at all thanks to the Harting plug. This type of connector is also used to connect the safety components to the control cabinet, so that handling is not compromised in any way. The retrofitted safety devices, which we can offer for every machine type, come with a 12-month guarantee! Pgedpfx Aieuw Uu Njrsu The electronic spindle guard can be adjusted in several axes and is designed to prevent interference with the working spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cap is designed to prevent interference with the rotating stub shaft and tool clamping. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: rigid angular table Travel: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1,9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min Equipment and accessories: Coolant device, central lubrication, manual, machine feet, electronic spindle protection, electronic spindle protection cap Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, We offer in good conditon Hurco VMX42i with BT40 spindle and Winmax software. X-Axis travel: 1067mm Y-Axis travel: 610mm Z-Axis travel: 610mm Pjdpfxs Aa Dd Is Airogu

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex-yard: Semi-automatic cold circular saw, Eisele Psdpfx Ae Aa Nb Ejirjgu Type VMS II PV Year of manufacture 1980 Saw blade 275 mm Cutting range 90 mm Stroke 120 mm Speed 40/80 Drive 2 kW Weight 1.5 tons Roller conveyors, right/left, each 2 m long Price: Euro 1,500.00 plus VAT.

Condition: used, Year of construction: 1979, functionality: fully functional, cutting diameter 440 mm Pedpjf Dwa Uefx Airsgu weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), functionality: fully functional, operating hours: 4,777 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 4,777 h Load capacity and mast Load capacity: 1,800 kg Lifting height: 4,500 mm Mast type: Triplex mast Full free lift: available Battery Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Hydraulics Hydraulic valves: 3rd and 4th valve Side shifter: available Hydraulic fork positioner: available Pedpfxe Ad N Dne Airjgu Inspections and maintenance Service valid until: 10/2027 UVV inspection valid until: 10/2027 MACHINE DETAILS Dimensions and weight Length: 3,000 mm Width: 1,150 mm Height: 2,060 mm Own weight: 3,400 kg EQUIPMENT Battery charger Fork positioner with side shifter Lateral fall-through guard LED work light at the rear Orange warning light Comfort seat with lumbar support Seat heating Lot number: 219 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS Pedpfxo Ad N D Ue Airjgu DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), Elektromotorenwerk Brienz QCAVM90S-4 three-phase motor, serial number: 146378, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pjdpfxsi D Htns Airjgu

Condition: new, Rexroth MAC117B-0-WS-4-C/130-A-1/WI1521LV Permanent Magnet Motor, Part No.: R911245926, Serial No.: MAC117-00854, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Psdpfx Asi D Ngneirogu

Condition: new, Fanuc A06B-2266-B400 SV MOTOR AIS 22, serial number: C176A4702, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Pedpfx Aioi D H Rtjrjgu

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 900 mm, total length: 2,020 mm, total width: 430 mm, Tested forklift battery for your truck - 80V 5PZS 775AH - Special container + 1 year warranty + incl. Aquamatik filling system + incl. end discharge resistor & REMA 320 connector (other connectors can be supplied on request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 2,020 mm Width 430 mm Height 900 mm Weight: approx. 2,030 kg Suitable for the following models and more: Still MX-X Jungheinrich EFG 430 Jungheinrich EKX 515 Toyota FBMF30 Baumann EMS 65-70 Caterpillar EP25N Caterpillar EP30KPAC Caterpillar EP35KPAC Caterpillar FB30 PAC Caterpillar FB35K PAC Cesab 5 Daewoo B22/35 X-5 Daewoo B30 X Daewoo B30 X-5 Daewoo B30 X-7 Daewoo B30 X-RW Daewoo B30/32 X Daewoo B35 X-7 Doosan B30X5 Doosan B35X-5 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 50 Hubtex MQ 60 Hyundai 30BH-9 Hyundai 30BHA-7 Hyundai 50B-9 Podpjy Rnp Usfx Airsgu Kalmar ECD 40-5 Kalmar EFY 50 Kalmar EFY 60 Mitsubishi FB25N Mitsubishi FB30 Mitsubishi FB30AN Mitsubishi FB30K PAC Mitsubishi FB35AN Nissan QX30 Common battery sizes available, please inquire. Transport available.

Condition: used, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,020 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 40, Vertical Machining Center Manufacturer: HURCO Model: VMX 40 Technical Data: - X-axis travel: 1,020 mm - Y-axis travel: 510 mm - Z-axis travel: 610 mm - Table size: 1,020 x 610 mm - Spindle speed: 10,000 rpm - Spindle taper: SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Pgjdpfszaf Ixox Airou Subject to technical changes, errors, and prior sale.

Condition: used, New: No Part suitable for: trucks Psdpfjympfbex Airjgu Price: On request VAT/margin scheme: VAT deductible Type number: 2018954

Condition: good (used), Year of construction: 1990, functionality: fully functional, 1 x Circular saw Eisele VMS 1 Year of manufacture: 1990 With coolant system. Pgodpsyluqgsfx Airju In good condition. Technical data: Cutting speeds: 40/80 RPM Saw blade diameter max. 280 mm Accessories: 2 x Saw blade 1 x Roller stand The machine can be inspected while powered on.

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 8, color channels: CMYK+BIAŁY+LAKIER, number of print heads: 2, resolution (max.): 1,440 dpi, paper width (max.): 1,600 mm, paper height (max.): 200 mm, input voltage: 240 V, For sale: Mutoh SmartColor H200. Large-format printer for direct LED-UV printing with a width of 160cm. This plotter is based on the bestselling Mutoh ValueJet 1638UR LED-UV model. By combining Japanese and Italian technologies, a compact plotter with great capabilities has been created. The machine is equipped with a heavy table with a conveyor belt and a very powerful vacuum system. Thanks to its robust construction, we can print materials weighing up to 100kg/m² and of unlimited length and height, up to over 200 millimeters in standard configuration! Undoubtedly, thanks to such a large clearance, the plotter offers enormous possibilities for printing on finished products. The Mutoh SmartColor H200 is a 2-head piezo LED-UV printer with a working width of 1.62 m. In addition to CMYK colors, it also features white and varnish. This configuration allows for multi-layer printing in a single pass (simultaneous printing). This provides significantly greater capabilities compared to conventional "eco" printers and competing solutions. Additionally included: - Auxiliary table - Winding system - Deionization strip The plotter is operated with dedicated software. The plotter can print on black, colored, metallic, fluorescent, reflective, transparent, and other materials. Of course, it can also handle conventional media such as papers, white films, banners, canvases, wallpapers, coated and uncoated materials. The low ink curing temperature allows for the use of heat-sensitive media, such as thin films. Furthermore, the print is immediately dry and ready for further processing, assembly, or shipping. The new LED VJ-UA31 inks do not emit volatile organic compounds (0% VOC), meaning the device can be used in an office setting without additional filtration or air exchange – something that cannot be said about competing LED technologies. The inks are also flexible and resistant to cracking, bending, etc. The Mutoh SmartColor allows for printing in several new modes, such as 2xWHITE + 2xVARNISH + CMYK + 2xVARNISH, allowing for spectacularly enhanced prints with a thick varnish. Thanks to multiple layers, it is also possible to print increasingly popular "day-night" applications. The possibilities of using white ink, whether as an undercoat, overcoat, or simply printing on colored media, do not need to be explained to anyone! Inks in 1000 ml bags (CMYK and varnish) and 500 ml (white) installed in the following combination: CMYK + 2 x white + 2 x varnish. Key advantages: - Two print heads + two LED UV lamps - Resolution up to 1440 dpi - 6 colors: CMYK + WHITE + VARNISH (simultaneous printing) - Multi-layer printing (enhancement, special effects, Braille alphabet) - Prints are dry immediately after printing - Low energy consumption - No volatile organic compounds (0% VOC) - possibility of continuous operation in "office" conditions. Pedo Admb Djpfx Airegu The plotter has been used to print approximately 900 m². It is in 100% working order and ready for use. At the time of sale, a service technician will perform an inspection and eliminate any potential defects at the seller's expense. The machine is currently cleaned and preserved. Re-commissioning requires refilling with inks. Questions only via email.

Condition: new, Year of construction: 2026, 10 machines in stock, Behringer Eisele VMS 350 & 370 in standard configuration, new machines, including 1 saw blade and full warranty. Pgjdpfxoz Ihbts Airju Great prices!

Condition: used, mileage: 4,68,111 km, power: 95 kW (129.16 HP), first registration: 04/2013, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, emission class: euro5, number of seats: 20, total length: 7,400 mm, total height: 2,700 mm, Equipment: ABS, Damage: none Pgodpjzt N A Eefx Airju = Company Information = We are an international company based in Belgium, approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for buying and selling used buses and features a spacious parking area that serves as a showroom. We always have a wide selection of buses in stock across all brands, capacities, models, and price ranges. We can find the right touring, school, or city bus tailored to your requirements and budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon–Fri: 08:30–12:00, 12:30–17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: good (used), Year of construction: 2013, Vibratory finishing machine, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator, vibratory conveyor, vibratory feeder, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood and spray device -Manufacturer: KAYAKOCVIB, Round vibrator type KVM 600 -Work container: elastically mounted -Total volume: 600 liters -Outer diameter: 1360 mm -Work basin width: 430 mm -Work basin height: 570 mm -Accessories: Soundproof hood, spray device, speed controlled, pneumatic separator flap -Machine for: Deburring, polishing, edge rounding -Machine dimensions: 1650/2230/H1330 mm Pjdpfxjzhxdue Airogu -Dimensions of the control box: 780/1070/H280 mm -Weight: 1395 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 18,262 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 520 mm, controller manufacturer: HURCO, controller model: WinMax, total height: 2,500 mm, total width: 3,000 mm, table load: 250 kg, overall weight: 7,200 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, product length (max.): 4,500 mm, number of axes: 5, This 5-axis Hurco VMX42U vertical machining centre was manufactured in 2014. It features an impressive X-axis travel of 1,067 mm, Y-axis travel of 610 mm, and Z-axis travel of 520 mm. The machine includes an integrated tilting rotary table and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX42U machine we have for sale. Contact us for further details. Axes • Number of CNC-controlled axes: 5 (X/Y/Z/A/C) • Integrated tilting rotary table with A and C axes Podpfxs Afziro Airjgu • C-axis rotation: 360°Spindle and tool changer • Maximum spindle speed: 12,000 rpm • Automatic tool changerFeed rates • X-axis rapid traverse: 35 m/min • Y-axis rapid traverse: 35 m/min • Z-axis rapid traverse: 30 m/minElectrical data • Power supply: 400 V, 3-phase • Frequency: 50 HzOptions included • Spindle chiller • Renishaw 3D touch probe • Tool magazine with 40 tools • Chip conveyor • Mobile chip container • Ethernet connection • 5-axis simultaneous machining

Condition: used, Year of construction: 2000, Cincinnati Arrow VMC 750 Vertical Machining Centre with Heidenhain Control, Table Size 950mm x 520mm, 21 Tool ATC, BT40 Spindle Taper, Handwheel Pendant, Machine Weight 3300kg. S/No. 7043-H00-KK1379 (2000). Country of Origin: United Kingdom Please Note: This lot is located in Birmingham. Lot 18 of Auction 3512 Pjdpj Afwmqefx Airegu