Used Sternflex Axial Compensator for sale (1,490)

Condition: used, Weiss Type: WK3-2200/40/5/V Weiss Climate Chamber, Water-Cooled Data for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal: ± 0.8 K Spatial: ± 2.0 K Maximum heat compensation: 8000 W Data for climate tests: Temperature range: +10 to +95°C Dew point temperature range: +4 to +94°C with closed bottom element Humidity range: 10 to 95% RH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% RH Temperature homogeneity: Spatial: ± 1.0 K Maximum heat compensation: 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height: 1115 mm, Width: 1400 mm, Depth: 1400 mm External dimensions (lowered): Height: 2318 mm, Width: 1860 mm, Depth: 3658 mm External dimensions (above shaker): Height: 2710 mm External dimensions (maximum stroke height): 3038 mm Dimensions of interchangeable floor: Width: 1600 mm, Depth: 1504 mm Data for operation: Rated voltage: 3/N/PE AC 400V, 10%, 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse protection: 80 A, slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! Psdpfx Aieziixrorjrc The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. If necessary, refilling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber, Li-Ion, CO/CO₂ -42 to +150 °C, 400 V, Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, type VC³ 4018/S, manufactured in 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring and CO₂ inertization to enhance operational safety. Important Note: Due to this safety equipment, the test chamber is software-limited to a temperature range of -42 °C to +150 °C. The chamber is ideally suited for: Li-Ion battery tests Electronics and component testing Temperature and climate stress tests Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feedthrough installed as standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -42 °C to +150 °C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± K Humidity deviation over time: ± 1 to ± 3 % RH Heat compensation: 400 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg Prodpfxszimfvo Airoc For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC³ 7018 Climate testing chamber Temperature and climate testing chamber, air-cooled For sale is a used climate testing chamber from Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7018 Device type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 190 liters Dimensions (approx.): Width: 870 mm, Depth: 1,550 mm, Height: 1,800 mm Test chamber dimensions: Width: 580 mm, Depth: 450 mm, Height: 750 mm Weight: approx. 460 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 3 K/min Max. heat compensation: approx. 1,500 W Temperature deviation (time-related): ± 0.1 to ± 0.3 K Climate range (temperature): +10 °C to +95 °C Humidity range: 10 to 98 % RH Refrigerant 1: R404A Refrigerant quantity: 2.5 kg ND max.: 22.5 bar g HD max.: 25 bar g Pjdpfx Aijzm Ni Eorsrc Refrigerant 2: R23 Refrigerant quantity: 0.75 kg ND max.: 22.5 bar g HD max.: 25 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.9 kW Rated current: 16 A Equipment Touch panel control Programmable controller Stainless steel interior Temperature and humidity control LAN/Ethernet interface Viewing window with internal lighting Documentation / Operating manual Test reports Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Workshop-checked Moisture absorber replaced Optical condition as shown in the pictures Scope of delivery 1x Vötsch VC³ 7018 climate testing chamber Documentation / Operating manual Test reports Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. Podexx R Nqepfx Airerc - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: repair required (used), Year of construction: 2019, functionality: not functional, machine/vehicle number: BB19076267, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Maximum Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Prjdpfx Aoxx Shueiroc Design & Features - Guide Channel: Manually exchangeable, made from Vulkollan-type plastic to support high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar stabilization. - Remnant Handling: Provides rear extraction using a self-centering extractor or front ejection option. - Repositioning System: Optional rail system allows for up to 600 mm of axial or radial displacement for lathe maintenance. - Automation: Fully controlled by a PLC with brushless motor and digital pneumatic valves to manage speed and thrust. - Bar Storage: Single-level magazine with 235 mm bar capacity. Machine status: NOT WORKING # Set of guides and accessories for bar clamping included # Bearing set for the pusher head "Pusher head bar" included

Condition: used, mileage: 9,850 km, power: 140 kW (190.35 HP), first registration: 10/2025, fuel type: diesel, fuel: diesel, energy efficiency: G, CO₂ emissions: 196 g/km, fuel consumption (urban): 7.5 l/100km, fuel consumption (extra-urban): 7.5 l/100km, fuel consumption (combined): 7.5 l/100km, color: blue, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 6, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill Start Assist, E65 Burmester Surround Sound System, E7M MBUX Multimedia System, JB6 Parking Package with 360° Camera, JH0 Widescreen Cockpit, P2Y STYLE Plus Package, Q50 Trailer Coupling, ball-type, removable, T55 Electric actuation for sliding door, right, T56 Electric actuation for sliding door, left, VR9 STYLE, 553 Trailer Maneuvering Assist, 02B OPERATING MANUAL AND SERVICE BOOKLET - GERMAN, 502 Digital extra: Updates for intelligent speed assistance system, 7B4 WIPPS countries WEU+COC, 806 AEJ X5/1, 875 Wet Wiper Heated Wiper Blades, A1M Rear axle shaft without specified manufacturer, B25 Parking brake, electric, BA3 Active Brake Assist, BB6 Brake booster failure compensation, BB7 CO2-optimized braking system, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C6L Multifunction steering wheel, C74 Illuminated Mercedes-Benz lettering on the door sill, CA1 AGILITY CONTROL chassis, CA3 Active Steering Assist, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and attachments painted in vehicle color, D14 Roof rails, anodized, E1D Digital radio (DAB), E1E Digital extra: Hard drive navigation, E1T Touchpad, E4S Digital extra: Smartphone integration, ED4 Fleece battery 12 V 92 Ah, EI0 Wireless charging system for mobile devices, ES2 12 V socket, trunk/cargo area, ES3 12 V sockets for rear seat rows, right and left, ET4 Active Distance Assist. Prsds Afag Aspfx Airec We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle in trade. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage; touch-up paintwork may have been carried out on the vehicle as part of the preparation. No liability for printing and typographical errors. Errors and prior sale subject to change; click features may include digital extras that can be subscribed to completely or with a time limit via MercedesMe. ... more on our homepage

Condition: used, Year of construction: 1991, grinding length 600 mm grinding width 375 mm workpiece height 375 mm workpiece weight 300 kg table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m MICRO GRANIT has excellent properties for high-precision grinding machine construction. Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. - Table stroke: 100–250 mm. Prjdjzycnnspfx Airjc - Table speed: 40 m/min. - Switching: via cams, contactless. - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: used, mileage: 80,000 km, power: 375 kW (509.86 HP), first registration: 10/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, compressor, electronic stability program (ESP), navigation system, MAN TGX 18.520 4X4 BL SA Equipment: Compressor Hydraulic system: Tipping hydraulics Safety: ABS * All-wheel drive * EBS * ESP * Retarder/Intarder Extras: Rental possible MAN TGX 18.510 4X4 BL SA Wheelbase: 3600 mm Engine power: 375 kW / 510 HP Permissible gross combination weight: 40 t Gross vehicle weight: 18 t Other equipment: * Electronic Brake System (EBS) Psdey Dacmspfx Airorc * Anti-lock Braking System (ABS), off-road with additional terrain logic, emergency brake assist, high-performance engine brake, MAN PriTarder with MAN EVBec, adjustable * Roll-away protection * Emergency brake signal, automatic hazard warning activation * Front axle tires: 385/65R22.5 -Drive, wheel nut cover ring * MAN Hydrodrive 4x4 H * Driver seat heating * Driver seat armrests * Air-suspended passenger comfort seat * Multifunction steering wheel * Digital tachograph, Continental, pre-installed for Toll Collect toll system * 2 power sockets, center cab, 12V and 24V, open storage compartment with 2 USB charging ports, 5V (charging only) * Comfort storage below infotainment display, cigarette lighter * CB radio antenna preparation on cab roof * Air conditioning Climatronic * Cab GM: spacious (wide, long, medium height), comfort cab suspension, glass sunroof * Electrically operated stone guard for front headlights, coarse mesh grille * LED daytime running lights * H7 fog lights * H7 cornering lights * 3 storage compartments, high roof at front, 1 left and 1 right with hinged cover, 1 in the middle with roller blind * 2 drawers, center instrument panel * Pull-out refrigerator and drawer, center storage compartment * Rear wall cab, below bunk, with control panel, 2 power sockets in lower bunk area, 12V and 24V, and 2 USB ports 5V (charging only) * Compressed air connection with hose and nozzle * ESP * ASR (traction control) * Cruise control ACC Stop and Go, adaptive distance control * Adjustable speed limiter Fifth wheel * Fifth wheel: 40 mm mounting height * Fifth wheel plate (up to 20,000 kg fifth wheel load) * Fifth wheel coupling JOST JSK 37 C 2? * King pin diameter 2 inches * Automatic fifth wheel lubrication * Rubber-mounted fifth wheel coupling, confirmation of coupling, standard handle * Hydraulic system for tipping semi-trailer, 2-line system, MEILLER, 275/150 bar, axial pump, tipping hydraulics, MEILLER type 295/110 Rental possible! Interim sale and errors expressly reserved! Sale exclusively in accordance with our Terms and Conditions. Important notice: Despite careful verification of all details in our offer, errors may occur. Sometimes, these are caused by transmission errors between different platform systems. Therefore, we point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB (German Civil Code). Rather, it provides information for initiating a contract. The information provided is without guarantee and does not represent warranted characteristics.

Condition: used, mileage: 46,482 km, power: 120 kW (163.15 HP), first registration: 04/2025, fuel type: diesel, empty load weight: 2,130 kg, maximum load weight: 670 kg, overall weight: 2,800 kg, wheelbase: 3,200 mm, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 5,140 mm, loading space length: 2,336 mm, loading space width: 1,650 mm, loading space height: 1,353 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), had accident, navigation system, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, interior trim, wooden loading floor, partition wall, lumbar support, heat-protective glass, clock & tachometer, brake pad indicator, 5-door, 1st owner, Euro6e, green environmental badge (4), steel rims, rearview camera, anthracite color, passenger airbag, sliding door on the right, navigation with screen, color monitor for navigation system, parking assist, parking assist camera, parking assist sensors rear, parking assist sensors front, electric windows (2), seat heating, radio, radio/MP3, outside temperature display, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, comfort seats, rear-wheel drive, 3rd brake light, center armrest, country version Germany, additional equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will create a customized offer for you. Nationwide delivery possible. 502 Digital extra: Updates for intelligent speed assistant B25 Electric parking brake BA3 Active brake assist BB6 Brake force compensation in case of failure BB7 CO2-optimized braking system BH1 HOLD function C6L Multifunction steering wheel CF0 Basic chassis CLL Steering wheel adjustable in inclination and height D50 Continuous partition wall E0 Hill start assist E1D Digital radio (DAB) E1E Digital extra: Hard disk navigation E5 Electrical system for trailer socket E7M MBUX multimedia system EL8 2-way speakers front EY2 Digital extra: Live traffic information EY5 Mercedes-Benz emergency call system EY6 Breakdown management F3Z Comfort closing F48 Heating for windshield washer system F64 Electrically folding exterior mirrors F6 Lockable glove compartment F68 Heated and electrically adjustable exterior mirrors FR1 Rear camera not foldable FY Multi-button remote control FZ5 Anti-theft alarm G43 9G-TRONIC H15 Seat heating for passenger H16 Seat heating for driver H20 Heat-insulating glass all around HH9 Semi-automatic climate control system TEMPMATIC IK0 Complete vehicle J55 Seatbelt warning system for passenger seat JA7 Blind spot assist Prodpfxo Af Afhe Airsc

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902031226, empty load weight: 6,467 kg, maximum load weight: 32,533 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 90 %, color: black, Attention: The images are archive photos. The vehicle may be in use! #Chassis – haulage semi-trailer - Fifth wheel plate with replaceable 2" kingpin - Outer frame slightly inclined, new design with "Load-Lock-Profil" for attaching lashing straps - 24 t 2-speed landing gear, one-side operation, with straight lower section, with movable thrust compensation - Note: free landing leg corner clearance / free swing radius to the rear approx. 1930 mm - Pull-out ladder at rear - Side door holders - Rear underrun protection, galvanised steel - Anti-spray mud flaps according to EC - Rear corner impact protection - Pallet stop on both sides approx. 15–20 mm high, bolted design, loading height reduced by approx. 15–20 mm - Plastic toolbox #Axles + suspension - Disc brake axles with 430 mm disc diameter - Laser-aligned axles/running gear – reduced tyre wear and fuel consumption - Air suspension Prsdpfx Aij Ad N Dbjroc #Braking system - 2-line air brake system - Colour-coded line routing for easy servicing - Spring brake parking brake - 2 non-interchangeable coupling heads at front - EBS, electronic braking system with EBS socket at front - with raise & lower valve - Vehicle stability system - Axle load detection via EBS CAN bus signal, for display in the driver's cab - AAC Basic, automatic load relief on the last axle as manoeuvring aid, up to 20 km/h, can be switched off manually #Wheels and tyres - 435/50 R19.5" make at manufacturer's discretion - Steel rims, factory silver #Electrics - 24 volt, multi-chamber lamps, yellow LED side lighting - Yellow LED side lighting coupled with indicators - 2 white front position lamps - 2 white/red rear outline marker lights - Red/yellow non-interchangeable coupling heads #Floor - Screen-printed plywood approx. 30 mm thick, on longitudinal bearers for high point loading, forklift axle load max. 7100 kg #Front wall / front corner posts - 2 580 mm high, heavy-duty steel corner posts, release device for side curtain at front wall, - "Crash-Blocker", lower inside at approx. 140 mm height with steel impact protection #Centre stanchions - 3 pairs of sliding stanchions, movable along the full length, with 4-fold insertion pockets and long pocket at the bottom - 3 pairs of stanchion positions #Insert boards - Wooden insert boards #Rear wall / rear corner posts - Steel rear corner posts up to lower edge of roof, curtain attachment with round tube and curtain tensioning ratchet - Rear portal doors, 2-leaf, each with 2 internal turn-rod locks #Curtain - Curtain with welded-in horizontal and vertical straps - Stainless steel tensioning buckles #Roof - Fliegl-Blitz-Verdeck - Sliding roof, rear end section can be folded up, roof slides from rear to front, L-shaped roof rail for automotive industry, internal width between roof rails approx. 2 490 mm, curtain colour: white, lifetime "breakage guarantee", Roof non-elastic, minimal roof rail deflection during loading and unloading #Approval - with DEKRA inspection and expert report (acc. to §13 EG-FGV) - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL, acc. to DL 9.5 and load securing acc. to VDI 2700 sheet 12 ff. - Warning sign for longer vehicle - Expert report for longer vehicle combination

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,880 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, traction control, trailer coupling, - Heated exterior mirrors - Heated mirrors - Passenger seat - Leaf suspension - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio/multimedia system - Beacon light - Reversing camera - Disc brakes - Sliding roof - Seat heating - Sun visor - Lane departure warning system - Stability control Podpfx Aiszbbqrjrorc - Windshield Internal number for customer inquiries: 5-128 MAN TGM 18.320 4x2 BL WITH MEILLER Trigenius 3-Way Tipper Body AND PALFINGER CRANE Vehicle: * MAN TGM 18.320 4X2 BL crane tipper * Tipper body 4200x2420 mm, manufacturer MEILLER Type TRIGENIUS (new model series) Front wall height 800 mm Side wall height 600 mm Fully retractable lashing eyes in the platform floor * Cab CC: the compact (narrow, short, standard height) * Wheelbase 3,875 mm * Suspension: leaf/air * Drivetrain 4x2 * Tires FA 2x 295/80R22.5, RA 4x 295/80R22.5 * Gross vehicle weight 18,000 kg * Automatic transmission MAN PowerMatic 08.13 OD (8-speed gearbox) * Diesel engine MAN D0836 LFLBI, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6e * Transmission feature: EfficientRoll * Cruise control * Differential lock on rear axle * MEILLER axial pump 270/45 * Tipper body controls in cab * MAN EasyControl panel, 4 functions, operable from outside with door open * Tow coupling RINGFEDER type 4040/G150B * 2-line brake connection at end of frame * Sun visor in front of windshield * Central locking with remote * MAN Mediasystem Navigation Advanced 7" * Turn-assist system * Electronic Stability Program (ESP) * Traction control system (ASR) * Cruise control (FGR) * Adjustable speed limiter, Limiter (engine governor) * Reversing motion system * Smartphone integration * Heated and electrically adjustable rear- and wide-angle mirrors * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating * Adjustable height seatbelt on driver’s seat * 2 work lights on cab roof * 2 halogen beacon lights on cab roof * And much more Loader crane: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID truck-mounted loader crane with KTL coating * Hydraulic 4-stage extension - 11.7 m * Lifting moment 142.4 kNm (14.5 mt) * Slew range 420° * Electronic overload protection PALTRONIC incl. emergency stop and load indicator * Hour meter with service interval display * Scanreco radio remote control * PALTRONIC load and overload display at control panel * 5 selectable speeds Optionally also available from stock as Fassi F135AC0.24 !!! Financing, leasing, or hire purchase available. This is a non-binding offer. Subject to prior sale, errors, and modifications. Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Gross Vehicle Weight (GVW): 18,000 kg Axle configuration Brakes: drum brakes Front axle: Tire size: 385/65-22.5; steering; suspension: leaf springs Rear axle: Tire size: 315/80-22.5; differential lock; suspension: air suspension Functional Crane: Palfinger PK 14501 K SLD...

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,910 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, trailer coupling, - Heated exterior mirrors - Heated mirrors Prjdpfxjzd Skmo Airsc - Co-driver's seat - Differential lock - High beams - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Particle filter - Radio/multimedia system - Rotating beacon - Rear view camera - Disc brakes - Sunroof - Seat heating - Sun visor - Lane keeping assist - Stability control - Windshield Internal number for customer inquiries: 5-133 MAN TGS 18.440 4x2 BL with MEILLER Trigenius 3-sided tipper body and PALFINGER crane Loading crane needs to be installed. Image 1 serves as an example. Truck available immediately, completion after order placement approximately 2-3 weeks! Vehicle: Diesel engine MAN D2676 LFAY, 353 kW (480 hp), 2,450 Nm torque, Euro 6e MAN TipMatic 12.28 OD driving program MAN TipMatic Performance, Efficiency and Offroad, up to 70,000 kg Drive 4x2 Suspension Leaf/Leaf Differential lock 3,900 mm wheelbase 300 l fuel tank volume, 60 l AdBlue tank volume Full brake assist High-performance engine brake MAN EVBec, adjustable Disc brakes on front axle, drum brakes on rear axles Trailer coupling ROCKINGER Type 500 G 6B Cab NN: the practical one (narrow, medium-length, normal height) Tilting roof, mechanical Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating Sunblind door window, inside, mechanical, driver's side Cool box Infotainment control MAN SmartSelect with touchpad and direct selection buttons MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced Navigation map Europe and Russia Online traffic for navigation function Auxiliary drive, gear-dependent, type NTX/10c in conjunction with axial pump for tipping hydraulics, MEILLER Type 270/63 Hydraulic connection for tipping trailer, end of frame Control option for lift/relief of trailer axles DuoMatic coupling Body: Meiller Trigenius D212, 4,200 x 2,450 mm Floor of tipper body, made of steel HBW 450, 4 mm Load securing with floor and side wall lashing eyes Loading crane: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID truck-mounted crane with KTL coating * Single-arm with Single Link Plus 15° * Hydraulic four-stage extension (4-stage hydraulic) = 11.6 m at 1020 kg * Slewing range 420° * Electronic overload protection PALTRONIC including EMERGENCY/OFF and utilization display * Hour meter with service interval display * Radio remote control Scanreco (joystick control) * 5th and 6th control circuit with hose reel * Outriggers hydraulically extendable * DISPLAY OF UTILIZATION and overload PALTRONIC on the remote control * 5 selectable speeds Financing, as well as leasing or hire purchase is possible. This is a non-binding offer. Subject to prior sale, errors and changes. Technical information Number of cylinders: 6 Engine displacement: 12,419 cc GVWR: 18,000 kg Axle configuration Brakes: Drum brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80-22.5; Differential lock; Suspension: Air suspension Functional Crane: Palfinger PK 14.501 K SLD5, behind the...

Year of construction: 2022, operating hours: 100 h, condition: reconditioned (used), functionality: fully functional, Complete, fully functional potato processing line consisting of the following components: - Hopper with bottom conveyor for approximately 2 tons of potatoes - Elevator belt for supplying the washing drum, stainless steel - Washing or peeling machine Dornow 35kg, automatic program, stainless steel - Sorting table, approx. 2.5 meters long, stainless steel - Feed hopper elevator with water, stainless steel (new belt) - Marcellissen french fry cutter, max 500kg/hour (new blades) - Axial french fry sorter, stainless steel - Elevator belt, stainless steel - Weighing system, digitally adjustable, stainless steel (new drives, weighing cell, and indicator) - Henkovac vacuum packaging machine, stainless steel (new sealing parts) This system was completely overhauled and prepared for production in 2022. The individual components are coordinated and switch on or off automatically during the process. Podj Afywnspfx Airjrc Potatoes are fed into the system unwashed and come out vacuum-packed. You can choose between washing and peeling. The total capacity is a maximum of approximately 500kg per hour. Questions? Feel free to call.

Condition: used, mileage: 16,050 km, power: 120 kW (163.15 HP), color: grey, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Phone: B25 Parking brake, electric; BA3 Active Brake Assist; BB6 Brake booster failure compensation; BH1 HOLD function; C6L Multifunction steering wheel; CF7 Comfort chassis; CL1 Steering wheel adjustable in inclination and height; CM2 Bumpers and trim in vehicle color; CU4 Aerodynamics package; E07 Hill start assist; E1D DIGITAL RADIO (DAB); E1E Navigation; E4S Smartphone Integration Package; E7M MBUX Multimedia System; ED4 Fleece battery 12 V 92 Ah; EL9 2-way speakers front and rear; ES2 12 V socket in trunk/cargo area; ES3 12 V sockets for rear seat rows, right and left; F2W Winter package; F3Z Comfort door closing; F64 Exterior mirrors, electrically folding; F66 Lockable glove compartment; F68 Exterior mirrors, heated and electrically adjustable; F71 Interior mirror, automatically dimming; FF1 Center console with storage compartment; FJ3 Double cupholder in the center of the cockpit; FK2 Radiator grille, chrome; FP2 Mirror package Vito; FP4 Chrome interior package; FS5 Illuminated mirrors for sun visors; FY7 Multi-button remote control; H00 Warm air duct to passenger compartment; H15 Seat heating for front passenger; H16 Seat heating for driver; H20 Heat-insulating glass all around; HH4 Automatic climate control system THERMOTRONIC; HZ0 Auxiliary heater, electric; HZ7 Air conditioning system, semi-automatic control, TEMPMATIC in the rear; IL6 Metallic paint; IN2 Wheelbase 3200 mm, long overhang; J2W Maintenance interval 2 years; J55 Seatbelt warning for front passenger seat; JA7 Blind Spot Assist; JA9 Traffic Sign Assist; JB4 Active Lane Keeping Assist; JB7 Parking package with reversing camera; JH3 Communication module (LTE) for digital services; JK5 Instrument cluster with color display; JW8 ATTENTION ASSIST; JX2 Maintenance interval 40,000 km; K51 Fuel misfill prevention; KB5 Main tank 70 liters; L LEFT-HAND DRIVE; LA2 Headlamp Assist; LB9 Exit lights; LC4 Comfort roof control unit; LC7 Footwell lighting, front; LC8 Ambient lighting for tailgate; LE1 Adaptive brake light; LE6 Night lighting in the rear; LG4 Tail light, brake light and indicator light in LED technology; LP2 Interior and ambient lighting, combined; M3E Electric blower, performance level 5; M60 Generator 14 V / 250 A; M6A EMISSIONS CLASS EURO 6E-BIS M1; M72 Vehicle compatible with HVO; MG9 Generator management; MJ8 ECO Start-Stop function; MK8 Speed limiter 210 km/h; MS1 Cruise control; MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min; MX0 BlueEFFICIENCY package; Q50 Trailer coupling, ball head, removable; QA4 Trailer load 2500 kg; R17 Light alloy wheels 7 J x 17, 5-spoke design; SA1 Seat cushion depth adjustment, driver; SA2 Seat cushion depth adjustment, front passenger; SA6 Airbag, front passenger; SB1 Comfort driver's seat; SB2 Comfort front passenger seat; SE4 Lumbar support, front passenger seat; SE5 Lumbar support, driver's seat; SH1 Thorax-pelvis sidebag, driver; SH2 Thorax-pelvis sidebag, front passenger; SH9 Windowbags for driver and front passenger; SK2 Seat occupancy recognition, driver's seat; SK6 Child detection in vehicle, passive; T14 Active latch for sliding door; T19 Sliding door, left; T70 Child safety lock on doors in passenger compartment; T74 Grab handle for entry; T75 Grab handles for entry, driver and front passenger; U73 Armrests for seating in passenger compartment; UR1 Seat rail system with quick-release Podszwlqyopfx Airorc

Condition: used, Year of construction: 2011, functionality: fully functional, grinding length: 500 mm, grinding width: 280 mm, total height: 2,300 mm, total length: 2,130 mm, total width: 1,780 mm, table load: 400 kg, overall weight: 3,000 kg, grinding spindle speed: 1,450 rpm, Grinding length 500 mm Grinding width 280 mm ABA Universal surface grinding machine “Made in Germany” Type 500C Year of manufacture 2011 _____ Grinding length max. (table longitudinal travel 500 mm) Grinding width max. (traverse travel max. 280 mm) Magnetic table size 500 x 250 mm Table load maximum 400 kg Prodpfx As Agglwoirsc Grinding wheel dimensions 300 x 50 x 76.2 mm Grinding spindle speed max. 1,450 rpm Grinding spindle drive approx. 5.5 kW Connection: 50Hz – 3x400 V - 50 Hz Weight approx. 3,000 kg Accessories / Special equipment: • ABA’s own program control with touchscreen color display for workshop operation! • Table movement via toothed belt drive, ideal also for fast grinding of smaller workpieces. • Feed (Y) via ball screw drive, linear guides in all axes. • Dresser mounted on the table with automatic dressing cycle including compensation. • Magnetic table EPEFINE2 500 x 250 mm with fine pole spacing and adhesion force control. • Complete enclosure of the working area with electrically monitored sliding doors. • Wet grinding system with separate belt coolant filter and optional oil mist extraction. • Modern LED lighting, various accessories, operating manuals. • Compact design 2,130 x 1,780 x 2,300 mm (plus oil mist extraction). Condition: Good condition! Suitable for all grinding tasks!

Year of construction: 2015, condition: new, functionality: fully functional, Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends Prsdpsu Itlnjfx Airec Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness. Tube bends can be manufactured with a final bend angle of 90°. Variable bend angle adjustment Simultaneous heating of the bending blank in the radiator field Rotation of bending blanks during heating to achieve homogeneous heating The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements. Siemens PLC control system with touchscreen user interface

Condition: used, Quick-change drill chuck with inserts for holding drilling, reaming, countersinking, and threading tools. Tool holder - quick-change holder - quick-change chuck Type SF 46 MK4 presumably a West German product similar to BILZ / MAYSSO Tool holder: MK4 - only suitable for vertical use (sleeve is locked by its own weight) - suitable for clockwise and counterclockwise rotation Insert sleeve diameter: 46 mm 3 pieces of insert sleeve MK2, length = 105 mm 3 pieces of insert sleeve MK3, length = 109 and 122 mm 3 pieces of insert sleeve MK4, length = 135 mm Pjdsz It Rmspfx Airerc - Quick-change system for drilling and radial drilling machines as well as CNC drilling machines - various operations can be performed with very quick tool changes in a single workpiece setup - with dual ball clamping system for secure torque transmission and play-free seating of the inserts in the chuck - Not suitable for radial loads, e.g., milling, and tensile loads, e.g., back-countersinking. Weight: 14 kg good condition The inserts can be quickly changed without any auxiliary tools and are automatically locked when inserted into the chuck. The inserts are unlocked by axially shifting the switching sleeve. The tool change can be performed with the spindle both stationary and rotating. Short insertion and retraction distances of the inserts allow for tool changes in seconds. The quick-change system can be used vertically for both clockwise and counterclockwise rotation.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. Prodpfx Aoz Ipzujirec • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 576308, workpiece weight (max.): 7,500 kg, total height: 3,360 mm, total width: 2,150 mm, total length: 3,600 mm, table length: 1,640 mm, table height: 1,140 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,510 mm, feed length Z-axis: 650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, overall weight: 12,640 kg, Equipment: documentation/manual, CNC SINKER EDM MACHINE – OPS-INGERSOLL GANTRY EAGLE 1200 For sale: a large-format, premium-class CNC sinker EDM machine – OPS-Ingersoll Gantry Eagle 1200. Manufactured in Germany, its gantry structure (Mobile Portal) provides the highest geometric stability and micron-level precision when machining heavy molds and dies. MACHINE SPECIFICATIONS • Manufacturer: OPS-Ingersoll Funkenerosion GmbH (Germany) • Model: Gantry Eagle 1200 • Serial number: 576308 • Year of manufacture: 2009 • Conformity mark: CE GEOMETRIC PARAMETERS AND KINEMATICS (Axes) Full 4-axis system, digital AC servo drives: • X-axis travel (head): 1000 mm • Y-axis travel (portal): 1510 mm (loading position extended to 1955 mm) • Z-axis travel (slide): 650 mm • Integrated C-axis: 360° rotation, 0.001° resolution, 1–20 rpm speed • Feed rate (X, Y, Z): up to 5,000 mm/min • High-Speed Jump speed: Eagle Power Jump technology up to 18,000 mm/min (18 m/min) WORK TABLE AND MACHINING AREA • Table dimensions: 1140 x 1640 mm • Maximum table load: 7,500 kg (7.5 tons) • Maximum electrode weight: up to 300 kg (manual operation up to 50 kg, automatic operation up to 25 kg) • Work tank: Automatically lifting/lowering tank structure (Lifting container). • Internal tank dimensions: 1270 x 1770 x 680 mm (max. dielectric level: 640 mm) PULSE GENERATOR (Eagle PowerTec) • Technology: Adaptive current control, resistor-less pulse generator. • Pulse shaping: Adaptive waveform (rectangular pulses, modified rectangular pulses, capacitor pulses). • Working current: PT 60 / PT 110 current module (60 A or 110 A depending on the configuration). CONTROL SYSTEM AND HMI COMPUTER • Control model: PC-NC-Dialog (2 x 32 bit), adaptive Eagle PowerTec control with a 17" LCD monitor • HMI unit: Andronic 2060S industrial computer (Intel Celeron M 1.6 GHz, 80 GB hard drive, Soft PLC CoDeSys, InterBus-S). • Operating system: Microsoft Windows® XP® Professional Embedded. • Communication: USB 2.0 ports and Ethernet network interface. • Advanced functions: Orbital erosion, backlash compensation, automatic measuring cycles. • Remote control: PowerTec Handheld with display. AUXILIARY SYSTEMS AND AUTOMATION • Filtration system: Cartridge filters in the base, area approx. 32 m², capacity 2800 liters of dielectric. Prjdpfezum Ubex Airec • Cooling: Compressor unit with a cooling capacity of 7.9 kW. • Lubrication: Automatic centralized axis lubrication. • Safety: Factory-installed fire extinguishing system (16 kg CO₂ cylinder) with automatic monitoring – enables safe unattended operation. LOGISTICAL AND TRANSPORTATION DATA • Transportation dimensions of the machine body (width x depth x height): 2150 x 3600 x 3360 mm • Transportation weight of the machine body: 12,000 kg (12 tons) • Transportation dimensions of the generator: approx. 1800 x 1600 x 2310 mm • Transportation weight of the generator: approx. 640 - 700 kg • Total set weight: approx. 12,640 kg

Condition: used, mileage: 22,350 km, power: 140 kW (190.35 HP), first registration: 04/2025, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, energy efficiency: G, CO₂ emissions: 199 g/km, fuel consumption (urban): 7.6 l/100km, fuel consumption (extra-urban): 7.6 l/100km, fuel consumption (combined): 7.6 l/100km, color: black, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 7, total width: 2,249 mm, total height: 1,901 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, D34 Panoramic sliding sunroof, E07 Hill-start assist, E7M MBUX multimedia system, JB6 Parking package with 360° camera, JH0 Widescreen cockpit, P2Y STYLE Plus package, Q50 Trailer coupling, ball head, detachable, VR9 STYLE, 553 Trailer maneuvering assistant, 055 AEJ X4/2, 502 Digital extra: Updates for intelligent speed assistance system, 805 AEJ X4/1, B25 Parking brake, electric, BA3 Active brake assist, BB6 Brake booster failure compensation, BB7 CO2-optimized braking system, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C6L Multifunction steering wheel, C74 Illuminated Mercedes-Benz lettering on the door sills, CA4 AIRMATIC, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and attachments painted in vehicle color, D14 Roof rails, anodized, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1T Touchpad, E4S Digital extra: Smartphone integration, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk/cargo area, ES3 12 V sockets for rear seat rows, right and left, ET4 Active distance assist DISTRONIC, EW6 Digital extra: Remote Services Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F1O Center console with storage compartment + cup holder, central design, F2W Winter package, F3Z Comfort closing, F48 Heating for windshield washer fluid. We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle in trade. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage; touch-up paintwork may have been carried out on the vehicle as part of the preparation process. No liability for printing and typographical errors. Subject to errors and prior sale. Click features may include digital extras that can be subscribed to completely or with a subscription fee via Mercedes me. ... more on our website. Prsdo Abt T Iopfx Airec

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 102920, Technical Characteristics: Work Area - Maximum diameter of clamping plate: 250 mm - Maximum turning diameter: 270 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 175 mm - X-axis travel: 660 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 300 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading stations by workpiece diameter: 14/(80...200 mm), 18/(30...160 mm), 30/(30...85 mm)) Main Spindle - Spindle according to DIN 55026: Size 6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Turret with Driven Tools - Tool holders per DIN 69880: 12 x VDI40 - Number of positions: 12 - Max. tool length (including holder): 190 mm - Max. speed: 6,000 rpm - Max. torque at 10% duty cycle: 37 Nm, at 25%: 26 Nm, at 100%: 14 Nm Electrical Equipment - Operating voltage: 400 V - Connected load: 36 kW / 80 A Dimensions - Total dimensions: Length: 3,120 mm (4,185 mm with chip conveyor), Width: 2,266 mm, Height: 3,200 mm - Weight: 7,500 kg Main Features and Capabilities: - Vertical design: Enables optimal chip evacuation as well as easy loading and unloading - Control: Siemens 840D - High precision: Positioning accuracy in X, Z, and Y axes ±0.001 mm, Heidenhain linear scales - Main spindle: High power and broad speed range - Automated loading/unloading: Automated workpiece loading and removal via integrated system - Driven (live) tools: Supports live tooling for extended machining range, including drilling and milling Pedpfxjxxiwyo Airorc - Part detection sensor with compressed air gauge through spindle: SMW Autoblock Linear Position Sensor LPS-X - In-process control: Marposs T25 - Chip conveyor - Coolant chiller: Texa TCW55PMSBXMF000, max. 30 bar input - Coolant filtration with paper belt filter: Micron filter EVO500Pro+KMT150, 550 liters, 80 l/min - Documentation: Digital & hard copy manuals available Machine Status: NOT WORKING - Lifetool motor - Slideways & carriages (X & Z axes) - Hydraulic pressure compensation block

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: Prodpfexx R S Eox Airoc - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Prsdexx Sclepfx Airec Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Psdpfoxx Sfasx Airorc Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING

Condition: used, mileage: 20,720 km, power: 120 kW (163.15 HP), first registration: 06/2025, fuel type: diesel, empty load weight: 2,152 kg, maximum load weight: 648 kg, overall weight: 2,800 kg, wheelbase: 3,430 mm, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 5,370 mm, loading space length: 2,566 mm, loading space width: 1,650 mm, loading space height: 1,353 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, interior trim, wooden load floor, extra-long, right-hand mirror with electric adjustment, partition, lumbar support, heat-insulating glass, clock & tachometer, brake pad indicator, 5-door, 1st owner, Euro 6e, green environmental badge (4), steel rims, rear-view camera, black, passenger airbag, sliding door on the right, navigation system with screen, color monitor for navigation system, shift paddles, parking assist, parking assist camera, parking assist sensors at the rear, parking assist sensors at the front, electric windows (2), seat heating, live information system, radio, radio/MP3, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, comfort seats, rear-wheel drive, 3rd brake light, country version Germany, additional equipment available, errors and prior sale excepted. Trade-in possible, financing possible, please contact us, we will create a customized offer for you. 502 Digital extra: updates for intelligent speed assistant, B25 Electric parking brake, BA3 Active brake assist, BB6 Brake force compensation in case of failure, BB7 CO2-optimized brake system, BH1 HOLD function, C6L Multifunction steering wheel, CF0 Basic chassis, CL1 Steering wheel adjustable in inclination and height, D50 Continuous partition, E07 Hill-start assist, E1D Digital radio (DAB), E1 Digital extra: hard drive navigation, E5 Electrical system for trailer socket, E7 MBUX multimedia system, EL8 2-way front speakers, EY2 Digital extra: live traffic information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2W Winter package, F3Z Comfort closing, F48 Heating for windshield washer system, F64 Electrically foldable exterior mirrors, F66 Lockable glove compartment, F68 Heated and electrically adjustable exterior mirrors, FR1 Rear camera not foldable, FY7 Multi-button remote control, FZ5 Burglar and theft alarm, G43 9G-TRONIC, H15 Seat heating for passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 Semi-automatic climate control system TEMPMATIC, IK0 Complete vehicle, IN3 Wheelbase 3430 mm, overhang Prsdpfx Aij Advwzersc