Used Stiefelmayer 3D for sale (1,726)

Year of construction: 2019, condition: excellent (used), Image-guided 3D coordinate measuring machine Manufacturer: Keyence Type: XM-1200 series Year of manufacture: 2019 Control system: Keyence Bsdpfxsih R Uxo Abtjdg Technical data: ----- • Camera chip: 4 MP CMOS • Measuring range: 600 x 300 x 200 mm • Smallest display unit: 1 µm • Smallest angle: 0.0001° • Repeatability (locked): ±3 µm • Maximum table load: 25 kg • Display: 15" TFT • Weight: 40 kg Accessories: ----- • Manuals • As-delivered condition (Datasheet attached)

Condition: used, RENISHAW OMP 60 3D measuring probe SK40 Bdsdoy Dia Ijpfx Abtsg Condition: Glass cover damaged, but function not affected.

Condition: used, Renishaw RMP600 3D probe, SK40, including case Bsdpfxey Dibfo Abtsdg Condition: used (functional)

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: Bodpfx Aszbvqysbtjdg - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 2 kg, Equipment: documentation/manual, RENISHAW OMP 60 3D measuring probe, SK40 Bdodpsznk I Sofx Abtog OMP60 measuring probe – used Compact 3D measuring probe. The optical signal transmission allows for direct setup and inspection of workpieces on the machine and transmission of the signal. Possible application area for the measuring probe system: medium and large machining centers, compatible with all optical receivers from Renishaw. Switching methods for the measuring probe are adjustable. Factory setting: optical on/optical off. Probe stylus, l = 100 mm Probe ball, Ø 5.0 – ruby ball Holder for OMI-2 receiver – interface Protective hose and connector for cable from the receiver unit Diameter: 60 mm Battery compartment Weight: approx. 1.54 kg Operating manual for the OMP60 measuring probe is available in paper form and on CD-ROM. Made in the UK. RENISHAW OMI-2 transmitter/receiver OMM with connecting cable. Machine interface MI12 Honda Tool holder SK 40 Price negotiable. Our asking price is €4,190.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and inaccuracies. Sale only to countries within the EU.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: LS0011860, Year of construction: 2019, operating hours: 50 h, total length: 436 mm, total height: 870 mm, total width: 411 mm, overall weight: 42 kg, Printer is perfect Bdjdoztn Rbepfx Abtjg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, pipe diameter (max.): 210 mm, pipe length (max.): 6,000 mm, workpiece weight (max.): 800 kg, input voltage: 400 V, type of cooling: water, overall weight: 5,000 kg, total length: 12,000 mm, total width: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, FOR SALE: High-Precision 3000 W Fiber Laser Tube Cutting Machine (6 m) Industrial-grade 3 kW tube laser equipped with a side-loading system, a premium IPG YLS 3000 laser source, and a German LT Ultra bevel cutting head. A powerful and versatile solution for cutting round, square, rectangular, and oval tubes, as well as special profiles, with bevelling up to 45°. Machine origin & key details Bjdpfx Abezuf Dhotedg Loading system: side-loading Year of manufacture: 11/2017 (commissioned in Finland in 2018) Laser source: IPG YLS 3000 – 3000 W fiber laser, manufactured in the USA Bevel cutting head: LT Ultra-Precision Technology, manufactured in Germany Filtration: Welldone dust collector and filtration unit Key highlights Versatile tube profiles – round, square, rectangular, and oval tubes, plus open and custom shapes 3D bevel cutting – integrated bevelling up to 45° for high-precision weld preparation High speed & accuracy – max. operating speed 100 m/min, acceleration 1.0 G, positioning accuracy ±0.03 mm Heavy-duty capacity – tubes up to 6 m in length, max. load 800 kg Technical specifications Parameter Specification Laser power 3000 W (3 kW) Laser source IPG YLS 3000 (manufactured in the USA) Bevel cutting head LT Ultra-Precision Technology (manufactured in Germany) Filter / dust collector Welldone Loading system Side-loading Year of manufacture 11/2017 (commissioned in Finland 2018) Max. material length 6000 mm (6 m) Round tube diameter Ø 20 – Ø 210 mm Square / rectangular tube size 20 × 20 mm – 150 × 150 mm (any side) Bevel cutting angle ≤ 45° X/Y positioning accuracy ±0.03 mm X/Y repeat positioning accuracy ±0.02 mm / 1000 mm Cutting gap width 0.1 – 0.2 mm Max. operating speed 100 m/min Max. acceleration 1.0 G Max. loading capacity 800 kg Machine weight 4000 kg Machine dimensions (L × W × H) 12 000 × 2500 × 1900 mm Gross power < 40 kVA Power supply 380 V ±5 %, 50 Hz Operating temperature / humidity 0 – 40 °C / < 90 %

Condition: used, functionality: fully functional, machine/vehicle number: G7000034, Year of construction: 2021, operating hours: 12,000 h, The printers were purchased in July 2021, original price: €87,500. Regular maintenance was carried out by Stratasys. Reports are available. The printers are in top condition and fully functional. All print heads are present and in good condition. The printers are ready for collection. Bdjdpfx Abjzd Rtaeteg

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F421.24213, Year of construction: 2025, operating hours: 430 h, 3DGence INDUSTRY F421 – Excellent Condition Showroom Unit - Only 430 Operating Hours Price: EUR 38,900 net + shipping within the EU We are offering a 3DGence INDUSTRY F421 professional high-temperature industrial 3D printer in excellent condition, with only 430 operating hours. The printer was purchased directly from 3DGence in February 2025, when we were an official 3DGence partner. It has been used very little and is in excellent technical and cosmetic condition. Key advantages: 3DGence INDUSTRY F421 Only 430 operating hours Purchased directly from 3DGence – February 2025 Still covered by the manufacturer's warranty Full technical support from 3DGence M280 Printing Module included M360 Printing Module included Professional industrial-grade machine for demanding engineering applications Excellent condition Original purchase documentation available Manufacturer support and warranty status can be verified with 3DGence Included: 3DGence INDUSTRY F421 printer M280 Printing Module M360 Printing Module Original equipment and accessories supplied with the machine Documentation Why this machine? The INDUSTRY F421 is designed for professional and industrial applications requiring high-temperature materials and reliable, repeatable production. The included M280 and M360 modules provide flexibility for a broad range of engineering-grade materials and applications. With only 430 operating hours, this machine offers an opportunity to acquire a nearly new F421 at a significantly lower cost than a new system, while retaining the manufacturer's warranty and technical support. The machine is fully operational and can be inspected and tested before purchase. Operating hours: 430 hours Year of purchase: 02/2025 Bdedjzulwuepfx Abtsg Location: Slovakia / European Union For further technical information, additional photos, documentation, or to arrange an inspection, please contact us.

Condition: used, Year of construction: 2021, operating hours: 4,500 h, Equipment: all wheel drive, soot filter, For sale: Caterpillar D6 LGP crawler with GPS 3D. I am offering a reliable and robust Caterpillar D6 LGP for sale. The machine is in very good technical and optical condition and is ready for immediate use. Technical data: * Model: Caterpillar D6 LGP * Operating hours: approx. 4500 * Undercarriage: well maintained, operational * Performance: powerful and efficient * Weight: approx. 20 tons (depending on equipment) Equipment: * Wide LGP undercarriage for low soil compaction * Comfortable cab with heating and air conditioning * Joystick control for precise work * Hydraulic system fully functional * Maintenance regularly performed Bedpezwbuuofx Abtodg Condition: The machine runs perfectly and has always been well maintained. No known technical defects. Ideally suited for earthmoving, dike construction, terrain profiling, and many other applications. Inspection & Transport: * Location: Bergkamen * Inspection possible by arrangement * Transport can be organized

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 268 h, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, power: 0.6 kW (0.82 HP), We offer this used Zaxe Z3 3D printer, manufactured in 2024. Bdsdpfx Abjzhtiletog Product name: Zaxe Z3 3D Printer Input voltage: 100 - 120 V and 200 - 240 V Input current: 12 A and 7.5 A Frequency: 50 - 60 Hz Power: 600 W Printing time: 268 hours If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, functionality: fully functional, machine/vehicle number: G7000046, Year of construction: 2021, operating hours: 12,000 h, Stratasys Objet500 dental printer Purchased in July 2021. Original price: €87,500 Bodozd Ruqspfx Abtsdg Regular maintenance performed by Stratasys. Maintenance reports available. Excellent condition, fully functional. All print heads are installed in the printer and are functional. Machine ready for pickup.

Condition: excellent (used), Year of construction: 2022, joke Technology ENESKA PostPro – Post-processing station for 3D printing Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Machine type: Post-processing station for additively manufactured components For sale is a used joke ENESKA PostPro post-processing station for the professional post-processing of additively manufactured plastic components. The system was specifically designed for the depowdering, deburring, grinding, polishing, and finishing of 3D-printed components and features a closed processing chamber with integrated extraction technology, LED lighting, and convenient tool control. The scope of supply includes a comprehensive original accessory package with various electric and pneumatic processing tools, abrasives, and other accessories as shown in the pictures. Technical data: Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Power supply: 400 V / 50–60 Hz Connected load: 6,500 VA Fuse: 16 A slow-blow Output voltage (U20): 24 V Working chamber volume: approx. 560 l Working chamber: Large stainless steel working chamber Closed processing chamber Large viewing window LED working chamber lighting Integrated compressed air connections Connections for multiple processing tools Equipment: Touchscreen control HEPA H13 filter system Closed processing chamber Manual operations with protective gloves Perforated stainless steel work table Tool connections for electric and pneumatic tools Height-adjustable machine feet Tool package: Electric precision grinder Electric high-speed grinder Pneumatic belt grinder Compressed air blow gun with spiral hose Compressed air hoses Original joke replacement gloves Grinding belts Grinding pins Grinding discs and flap discs Plastic hammer Screwdriver Other accessories as shown in the pictures Bodpfx Abjzrvd Hjtjdg Dimensions: External dimensions: approx. 1,437 × 1,685 × 1,640 mm Weight: approx. 748 kg Transport data: Weight: approx. 748 kg Easy loading using a forklift or crane. Condition: Used Machine from industrial use. Optical condition as shown in the pictures. Scope of supply: joke ENESKA PostPro Electric and pneumatic processing tools Compressed air accessories Original replacement gloves Grinding and consumable materials Other accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2021, We offer this used Raise3D E2CF 3D printer, model Raise E2CF, manufactured in 2021. Product name: 3D printer Model number: E2CF Power: 350 W Voltage: 100–240 V Frequency: 50/60 Hz Bdodpfx Ajzuk D Tebteg Current: 4 A Weight: 35 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DG18000SE-3D, overall weight: 280 kg, fuel type: diesel, tank capacity: 30 l, color: white, power: 13 kW (17.68 HP), output current: 50 A, output voltage: 230 V, nominal power: 12 kW (16.32 HP), continuous power: 12 kW (16.32 HP), total length: 1,220 mm, total width: 750 mm, total height: 810 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the mobile generator for your uninterrupted power supply needs. The DG18000SE-3D generator offers a continuous output of 12 kW with its reliable 4-stroke engine. You can operate the DG18000SE-3D generator for up to 8–10 hours with its 30-liter tank. You can start the generator via electric start or recoil start. The starter battery is charged during operation, thus enabling easy starting the next time you use it. Technical data: Maximum power: 13 kW Rated power: 12 kW Frequency: 50 Hz Speed: 3000 rpm Rated voltage: 230 V / 400 V Power factor (cosφ): 1.0 Power: SINGLE-PHASE / THREE-PHASE Starting system: Electric start or recoil start Bdodpfx Abszvm A Uetsg Noise level (7m): 75–78 dB Tank capacity: 30 L Dimensions: 1220 × 750 × 810 mm Weight: 280 kg

Condition: good (used), Year of construction: 1972, functionality: fully functional, turning height: 1,000 mm, turning diameter: 1,600 mm, faceplate diameter: 1,400 mm, Retrofit: 2001 Siemens control system SINUMERIK 840D Bdodpfszvl R Rjx Abteg Faceplate diameter 1,400 mm Turning diameter 1,600 mm Turning height 1,000 mm Fully functional. Please refer to the photos for further information. A video of the machine in operation can be provided upon request. Inspection appointments are possible by arrangement. The buyer must arrange the collection. Loading onto a truck/container provided by the buyer is included. Invoice with VAT shown. Since these are used machines/used accessories, we exclude any warranty or guarantee. The information is provided to the best of our knowledge, and we assume no liability. We reserve the right to make changes to technical data and to correct any errors in the description. The buyer has the right to inspect the goods for condition and functionality before concluding the contract. We exclude any warranty for obvious and hidden defects, as well as compensation for damages of any kind, including damages that did not occur to the delivered item itself.

Year of construction: 2023, condition: ready for operation (used), Automatic 3D XRAY with laser option for Z reference, without calibration plate from 01/2023 with 1500 h. Bedpfx Abszuwwyotedg

Condition: excellent (used), FAM ILC-3D Linear Dicer / Cubing Machine – Stainless Steel FAM ILC-3D industrial dicer/cubing machine, designed for continuous three-dimensional cutting of food products into cubes, strips, and other regular shapes, depending on the installed blade set and cutting dimensions. Manufactured by FAM, a specialist in industrial cutting systems, the ILC-3D is designed to produce a uniform end product through a sequence of cuts in different directions. Its configuration is particularly suitable for lines where precision, size regularity, and continuous production are required. Its construction, primarily in stainless steel, feeding system, and interchangeable cutting unit allow it to be used in industrial plants processing fruits, vegetables, and other food products. MAIN FEATURES -Manufacturer: FAM -Model: ILC-3D -Type: Industrial three-dimensional dicer/cubing machine -Continuous cutting system -Cutting in 3 dimensions -Production of cubes/dices -Possibility of obtaining strips and other shapes depending on tooling -Continuous product feed -Multi-stage cutting system -Interchangeable blade sets -Cutting dimensions determined by the installed tooling -Electric motor drive -Construction primarily in stainless steel -Protected cutting chamber -Robust construction for industrial use -Access for cleaning, maintenance, and blade changes -Integrable into automatic processing lines CUTTING PROCESS The product is continuously fed into the FAM ILC-3D and guided towards the cutting unit. In a typical cubing configuration, the product passes through a sequence of elements that perform the necessary cuts in different planes, ultimately producing cubes of regular dimensions. The final size and geometry depend on the combination of blades, cutting guides, and transverse cutting elements installed in the machine. It can be used for: Cubing in 3 dimensions Cutting into strips Uniform product cutting Pre-processing before cooking or blanching Preparation for IQF freezing Preparation for canning Bedpfxszxlgqe Abtodg Dosing and subsequent packaging APPLICATIONS Particularly suitable for fruit and vegetable processors, canning companies, frozen food manufacturers, and producers of prepared meals who need to obtain uniform cuts on an industrial scale. Depending on the tooling and the characteristics of the product, it can process potatoes, carrots, onions, fruits, vegetables, and other food products suitable for mechanical cutting. The FAM ILC-3D offers a versatile solution for industrial lines where continuous cubing, uniformity of the final product, and the ability to adapt cutting dimensions using different blade sets are required. Machine available for inspection. Additional technical information, dimensions, blade configurations, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2017, operating hours: 485 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26080.9198 Category: Demo Mast: 2F2350 Lowered height: 1680 mm Lifting height: 2350 mm Bedpfxjzv R I Ue Abtodg Capacity: 1400 kg Year: 2017 Hours: 485 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7935 System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Type = Cat 3D (allowed in ZONE 22) Temperature class = 200*C (= T3) C - Db

Condition: like new (used), Year of construction: 2017, operating hours: 633 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26082.2204 Cat.: Demo Mast: 2F2350 Forks: 1250 mm Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Bedpfx Abozv R I Ijtodg Hours: 633 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7936 System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Type = Cat 3D (permitted in ZONE 22) Temperature class = 200*C ( = T3) C - Db

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DG23000SE-3D, overall weight: 370 kg, fuel type: diesel, tank capacity: 30 l, color: beige, power: 16 kW (21.75 HP), output current: 50 A, output voltage: 230 V, nominal power: 15 kW (20.39 HP), continuous power: 15 kW (20.39 HP), total length: 1,320 mm, total width: 810 mm, total height: 820 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the mobile generator for your uninterrupted power supply needs. The DG23000SE-3D generator offers you a continuous output of 15 kW with its reliable 4-stroke diesel engine. With its 30-liter tank, you can operate the DG23000SE-3D generator for up to 8–10 hours. You can start the generator using the electric start or the recoil starter. The starter battery is charged during operation, allowing for easy starting the next time it is used. Technical data: Maximum power: 16 kW Rated power: 15 kW Frequency: 50 Hz Speed: 3000 rpm Bsdpozvn Sqofx Abtodg Rated voltage: 230 V / 400 V Power factor (cosφ): 1.0 Power: SINGLE-PHASE / THREE-PHASE Starting system: Electric start or recoil starter Noise level (7m): 86 dB Tank capacity: 30 L Dimensions: 1320 × 810 × 820 mm Weight: 370 kg

Year of construction: 2024, condition: new, functionality: fully functional, We offer this new Sinterit LISA PRO SLS 3d printer, year of construction 2024. Printer is new and has not been used other than tested by the manufacturer. The printer is packed into robust travel enclosure and is ready to be shipped. Approximately 7 kg of fresh PA12 print powder is included. Machine name: Sinterit LISA PRO Serial number: 021624120019 Manufacture date: 03/2024 Manufacturing country: Poland Machine type: SLS 3D printer (Selective Laser Sintering) Dimensions (W x D x H): 690 x 500 x 880 mm Total weight: 90 kg Power supply voltage: 220-240 V Power supply frequency: 50/60 Hz Power supply current: 7 A Power consumption: 1.9 kW IEC protection class: Class I IP code: IP30 Maximum internal temperature: 210 °C Maximum external temperature: 60 °C Bdodjztkxhopfx Abtjg FCC ID: TE7WN725N Laser product class (external): Class 1 IR laser product, invisible laser radiation Laser product class (internal): Class 4 IR laser product, invisible laser radiation If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a Bsdpfjt Irffex Abtodg modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: like new (used), Year of construction: 2024, operating hours: 2,468 h, power: 39 kW (53.03 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, workpiece length (max.): 1,700 mm, workpiece width (max.): 800 mm, workpiece height (max.): 800 mm, workpiece weight (max.): 1,500 kg, number of slots in tool magazine: 60, total height: 3,000 mm, total length: 5,800 mm, total width: 4,300 mm, overall weight: 15,000 kg, table length: 1,700 mm, table width: 800 mm, mount diameter: 40 mm, number of spindles: 1, power of the milling unit: 39,000 W, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, space requirement width: 4,300 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, POSmill E 1600 Control system: Heidenhain iTNC 640 Travel in X: 1600 mm Travel in Y: 800 mm Travel in Z: 800 mm Table size: 1700 x 800 mm SK 40 tool holder Number of tool positions: 60 Max. spindle speed: 10,000 rpm Rapid traverse rate: 32 m/min Weight: 13.5 t Operating hours: only 2,468 h (as of August 20, 2026) Equipment: - Glass scales in all 3 axes - Hexagon 3D infrared probe system - Air through the spindle - Coolant system 20 bar with band filter unit - Mobile electronic handwheel - Heidenhain iTNC 640 - Tool changer with 60 positions, accessible from the front Bdjdpfovwlp Hjx Abtjg The machine is currently in our production facility and is still in use. Delivery is possible on short notice, subject to agreement. Training on the machine, transport, and commissioning are available for a separate fee. The machine has been regularly maintained and is in very good condition. Sale without accessories such as clamping devices, chip containers, workbenches, and tools.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,291 h, total height: 1,448 mm, total width: 1,238 mm, travel distance X-axis: 380 mm, product length (max.): 2,210 mm, number of axes: 3, Plastic 3D printer manufactured in 2018. This HP Jet Fusion 3D 4200 features a build volume of 380 × 284 × 380 mm and utilizes Multi Jet Fusion technology for efficient production. It is fully functional and has been in productive operation until June 2026, making it suitable for industrial production of functional end-use parts and prototyping. If you are looking to get high-quality 3D printing capabilities, consider the HP Jet Fusion 3D 4200 machine we have for sale. Contact us for further details. Bjdpfx Abszqtc Dstodg • Technology: Multi Jet Fusion (MJF) • Build Volume (X × Y × Z): 380 × 284 × 380 mm • Material: PA12 (Nylon 12) • Power Supply: 400 V • Electrical Connection: Three-Phase • Total Operating Time: 977453 min (approx. 16291 h) Optional Accessories • HP Processing Station • Function: Powder Processing Station • 3 × HP Build Units • 2 × HP Heating Lamps • 5 × HP Fusing Lamps Machine Condition • Fully Functional • No Known Defects • In Productive Operation Until June 2026 • Previous Application: Production of Small and Medium Series of Functional End Parts Additional Information • Suitable for Industrial Production • Material Processing Technology: Powder Bed Fusion (Multi Jet Fusion) • Application: Functional End-Use Parts, Prototyping, Small and Medium Batch Production