Used Stollberg Udara 10 for sale (29,288)

Condition: used, empty load weight: 5,520 kg, maximum load weight: 32,480 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 08/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller timber trailer 3-axle | SAF axles with disc brakes | Unladen weight 5,520 kg | Payload: 32,480 kg | Lift axle | Tyres: 385/65 R22.5 | 10 pairs of stakes | Subject to error, input mistakes and prior sale. Klodpfx Aex S N Ubjpdsu

Condition: as good as new (ex-display), Submersible Waste Water Pump, Drainage Pump, KSB Ama-Drainer A 405 SD/10, New/Unused Machine in Box Manufacturer: KSB Aktiengesellschaft (Frankenthal, Germany) Klsdsza Td Ispfx Apdou Type: AMA-DRAINER A 405 SD/10 S-H Overall dimensions : 290 x 290 x 520 mm Design: Submersible drainage/waste water pump with stainless steel housing Power output: 0.76 kW Rated current: 1.70 A Voltage / Frequency: 380–415 V 3~ (Three-phase) • 50 Hz Flow rate (Q): 2–21 m³/h Delivery head (H): 9.3–3 m Max. liquid temperature: T40°C Insulation class: Classe F Enclosure class: IP 68 (Max. immersion depth: 10 m) Standard: EN12050-2 Country of origin: Germany Designed for long service life under continuous operation. Suitable for drainage, wastewater handling, and emptying pits or tanks. Comes in its original factory packaging with cable.

Condition: excellent (used), Control unit, heating controller, osmosis control - control box, heating controller, heating control device -Manufacturer: Sauter, equitherm 100 heating controller with accessories, unused, original packaging -Type: EQJW 41 D 10 -Temperature sensor: EGT 30 B 10 / EGT 31 B 10 -Number: 2x heating controllers available -Price: per piece Kljdpfx Aox Hxcdjpdju -Transport dimensions: 210/210/H165 mm -Weight: 2 kg/piece

Condition: excellent (used), Year of construction: 1998, I sell the window production set: Ksdpfxofzzhye Apdjlu 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: used, machine/vehicle number: 007997, Max. panel width: 1000 mm Max. panel length: 2200 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 20 Kg Work capacity: 12 Cycles/min Kledpfoy Nkwxox Apdou Movement system: suction cups.

Condition: new, Year of construction: 2024, Hydraulic shear MVD I-SHEAR C 3100 - 10 complete with pneumatic rear sheet metal support. CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC INTERSPACE-BLADE ADJUSTMENT Material cutting capacity 450N/mm2 10 mm Material cutting capacity 700N/mm2 6 mm Cutting length 3100 mm Distance between shoulders 3600 mm Variable cutting angle 0.5 - 3 ° Blade press cylinders 14 Strokes per minute 7 - 13 Kjdofh R Ilepfx Apdelu Hollow 250 mm Motor power 22 kw Millimeter square and two sheet supports 1000 mm Rear register stroke 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight : 10.5 Ton

Condition: used, Used LED industrial light from Planistar Lichttechnik GmbH. Robust industrial housing with integrated LED technology and reflector insert. Ideal for industrial lighting applications. Manufacturer: Planistar Lichttechnik GmbH Model: 10-10-Xled-3-KX-46W-POL-Daimler Device Type: LED industrial light Condition: used Available quantity: 16 units Light color: White Supply voltage: 24 V DC Power consumption: 46 W Operating mode: Continuous light or flashing mode Kledpfx Apjzdngqjdeu Current consumption (continuous light): 1 A Current consumption (flashing mode): 1.5 A Protection rating: IP40 Pin assignment: Pin 1 Brown: 24 V DC Pin 3 Blue: GND Pin 4 Black: Signal 5–24 V DC (continuous light) Pin 2 White: Signal 5–24 V DC (flashing mode) Manufacturer part number: 20192171 Quantity: 16 units available

Condition: used, maximum load weight: 2,094 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 1,960 mm, total height: 1,020 mm, A12 GW26NG000301 High-bed tandem trailer, manufacturer STEMA, type SySTEMA SH .2, gross weight: 2,700 kg, Klodpfxeym Igwj Apdsu High-loader with low frame, 4.01 m x 1.83 m, 10" tyres, 100 km/h approval Loading height: 600 mm Subject to errors and prior sale.

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 250 bar, total length: 607 mm, high-pressure hose length: 10,000 mm, total height: 1,063 mm, total width: 518 mm, type of input current: three-phase, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, Technical Specification Voltage: 3 / 376–424 V / 50 Hz Working Pressure: 80–250 bar Flow Rate: 500–1000 l/h Inlet Water Temperature: 60°C Connected Load: 8.8 kW Nozzle Size: 047 Colour: Anthracite Weight with Accessories: 70.3 kg Weight with Packaging: 78.55 kg Dimensions (L x W x H): 607 x 518 x 1063 mm The compact, vertical design is made possible by the vertically mounted motor and pump. Compact dimensions facilitate storage. Manoeuvrable and easy to transport. Stable during operation. 4-pole, low-speed motor cooled by water and air; reliable stainless steel piston pump and brass cylinder head Long service life and economical maintenance. High performance and efficiency. Water suction function for water temperatures up to 60°C. Ergonomic Vibrasoft rotary nozzle Reduces vibrations by up to 30%. Kjdpfxsw Iduts Apdolu Reduces noise level and intensity. Rotary nozzle provides support for demanding cleaning tasks. Smart service design speeds up on-site maintenance Rotatable pump head. Convenient oil level indicator and integrated oil drain in the device housing. Modular design comprising pump, motor, and control cabinet. Support systems and LED display Integrated electronic control system. Automatic shut-off in case of network overload. Automatic shut-off in case of phase loss or leakage from the device. Comprehensive range of accessories with EASY!Lock technology Pressure and water volume can be adjusted via the Servo Control regulator located between the lance and the trigger gun. The EASY!Force Advanced trigger gun allows effortless operation. Rotary lance made of stainless steel, 1050 mm in length. Wide range of additional accessories Storage compartment. Adjustable hooks, e.g. for storing a second lance or power cable. High-pressure hose storage compartment.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, working width: 450 mm, warranty duration: 12 months, total height: 220 mm, total width: 460 mm, total length: 880 mm, water tank capacity: 10 l, We offer for sale a BR 45/10 Esc Staircase Scrubber Condition – Very good Year of manufacture – 2014 The machine is in very good condition – both visually and technically. It has undergone a complete, thorough overhaul, making it fully functional and ready for operation. Each device we offer is presented in authentic photos – you are buying exactly the machine shown in the pictures. Klodjw Igrzjpfx Apdju All machines purchased from us come with a 12-month WARRANTY. Technical Data: Brush working width (mm): 450 Working/suction width (mm): 450 Tank capacity (l): 10 Brush rotation speed (rpm): 290 Brush motor power (W): 190 Vacuum motor power (W): 1500 Voltage (V): 220 / 240 Frequency (Hz): 50 Weight (kg): 44 Dimensions (L x W x H) (mm): 880 x 460 x 220

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Ksdpfjzdn H Rsx Apdelu Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Keder D Ngtjpfx Apdelu Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), The Giro CA-10 is an advanced clipping system designed for efficient net packaging of fruits and vegetables. Key features include: • Versatile Bagging Capacity: Suitable for packaging products ranging from 500 grams to 4 kilograms. Immaculate condition having been in storage for at least five years. Klsdpfx Asv Hh Nhepdou

Condition: used, Technical specifications: Max. saw blade diameter: 400 mm Kledezd Ehfopfx Apdsu Scoring blade diameter: 120 mm Scoring blade powered by a separate motor Manual saw blade height adjustment Tilting saw blade from 0° to 45° Manual saw blade tilt angle adjustment Table length: 3200 mm Table lock Table extensions Fence Guide rail with 2 stops Safety switch Power supply: 380 V Main motor power: 5 kW Overall dimensions: Length: 3260 mm Width: 3300 mm Height: 1000 mm

Condition: good (used), Here, we offer a handling device from ZASCHESitec. This device was used in the manufacturing of instrument panels. Klsdpfx Aozdim Hopdsu It consists of the following components: KBK - FPM 10 - 7.0 x 5.0 Traveling carriage - LWK 762 x 762 Lifting module - Z-L6 - 80/1280 - 1486 Load handling device - GP10 Load capacity: 10 kg Scope of delivery: (ZASCHESitec handling device, technical documentation) Condition: used We would be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, Year of construction: 2019, operating hours: 245 h, machine/vehicle number: 3638, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Klsdpjzcbi Rsfx Apdsu

Condition: used, Year of construction: 2019, operating hours: 312 h, machine/vehicle number: 3542, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Kljdozcbi Dspfx Apdsu

Condition: used, Year of construction: 2019, operating hours: 314 h, machine/vehicle number: 1653, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Kjdpfx Apszcbgcedelu

Condition: used, Year of construction: 2019, operating hours: 355 h, machine/vehicle number: 1567, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Kjdpfxszcbf Se Apdelu

Condition: used, Year of construction: 2018, operating hours: 400 h, machine/vehicle number: 5455, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Kljdpfx Aozcbc Dspdsu

Condition: used, Year of construction: 2018, operating hours: 147 h, machine/vehicle number: 5454, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Klsdpfx Aszcbcwepdeu

Condition: used, Year of construction: 2018, operating hours: 319 h, machine/vehicle number: 5453, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Ksdpfxszcbcqe Apdjlu

Condition: used, Year of construction: 2018, operating hours: 287 h, machine/vehicle number: 0672, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Kledpfx Apjzca Thodeu

Condition: used, Year of construction: 2019, operating hours: 200 h, machine/vehicle number: 2782, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Klodpjzca N Nsfx Apdeu

Condition: used, Year of construction: 2017, operating hours: 476 h, machine/vehicle number: 8627V, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Klsdpfjzca E Rox Apdsu