Used Streicher Nut Tapper for sale (782)

Condition: new, GALVANIZED PALLET RACKS FOR OUTDOOR USE Hot-dip galvanized pallet racks for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 16.80 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 007 x upright approx. 450 cm x 110 cm, pre-assembled. - 024 x crossbar approx. 270 x 14 x 5 cm, T30. - 048 x Locking pins. - 048 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 54 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 3550 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Nwodpfx Absz Epr Uo Uel Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: good (used), The scope of delivery includes: 1x used pallet racking beam Material color: orange IPE profile: 100 x 55 mm Connector: 3 holes Clear width: approx. 2,700 mm 3 holes per connector Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm 1x set of fastening material consisting of: 06x screws M10 06x nuts 06x washers Nsdoibzftspfx Ab Uewl

Condition: good (used), The scope of delivery includes: 1x used pallet rack beam Material color: orange IPE profile: 100 x 55 mm Bracket: 5 holes Clear width: approx. 2,700 mm Per bracket: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 1x set of fastening materials consisting of: Nwedeibzgxopfx Ab Usl 10x M10 screws 10x nuts 10x washers

Condition: new, bore capacity in steel (diameter) 25.0 mm Nwodpfx Abjxaa Ths Ujl throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including volumetric dosing unit, 1 cup, single bucket conveyor and outfeed conveyor. Suitable for granulate-type products such as sugar, rice, beans, nuts, etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German etc. ),date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 5000ml; film width: max. 620mm; bag size (mm): min.-max. L(80-400)xW(180-300); max. speed of the machine in neutral: 45 cycles/min; stainless steel 304; 220V, 5kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; machine weight: 700kg. Capacity of dosing hopper is up to 50l. Single bucket conveyor has a material capacity up to 50l. The container is filled manually in the bottom position. In the top position it will be emptied automatically (complete cycle: 1 minute). - Specifications: height 3-5m; 220V, 1kW; stainless steel, dimensions: L1400xW700xH3500mm. Generally it has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules are possible. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Deviations possible. Total dimensions of complete system approximately L1780xW5100xH3500mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. Nedov Nmkiopfx Ab Uewl That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Linear weigher and mixer for the mix of two different products - ideal e.g. for seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 4.5 L; weighing range: 50-3000g; accuracy: +/- 2-5g; max. speed of the machine in neutral: 30 cycles/minute; power: 220V, 6A, 1.2kW. Njdpfxov Nmw Aj Ab Ujwl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Injection Unit • Injection unit 2250 Nodpezxfg Refx Ab Uswl • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Mold Heating, Electrical System, and Connections • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm Nwjdpfx Aszk Npgsb Uel - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: new, Year of construction: 2026, P5 Retrofit Nwodpfozzzrhex Ab Usl CNC milling center for 5-axis machining of thermoformed parts. Working area (cube dimensions): X-axis: 600 mm Y-axis: 800 mm Z-axis: 400 mm, with a fixture height of 120 mm. All specifications are based on a tool length of 60 mm from the front edge of the collet nut. Max. shank diameter: 10 mm (ER16 mini collet). Table design: 1 piece aluminum flat table, size: 600 x 800 mm, with threaded bushings. Vacuum supply: 1 piece vacuum clamping circuit on the table, vacuum distribution pipe with 3 x quick-release couplings NW 7.2, digital pressure monitor. 1 piece vacuum pump, suction capacity approx. 40 m³/h. Milling spindle: 1 piece milling spindle (double spindle), air-cooled, 2 x ER16 mini collet chucks, power 2.5 kW, max. speed 27,000 1/min. Axis drives: Ball screw in the X / Y axis and Z axis; A / B axes with hollow shaft drives. Rapid traverse speeds X / Y axis => 45 m/min Z axis => 45 m/min Rotary / swivel axis => 12,000°/min. Acceleration (max.) => 2 m/sec² All axes are equipped with digital technology and absolute measuring systems. This eliminates the need for a reference run at the start of operation. Machine control: 1 piece BWO VEKTOR C Basic Plus Robot machine control. The complete unit is housed in an enclosure with a 15-inch capacitive touchscreen, which is mounted on the front of the machine. 64 MB NC memory USB interface Safety features: The machine is equipped with a robust sheet metal guard, with a separate access door for the rear of the machine; the guard is open at the top. 1 piece sliding door (manually operated), to demarcate the working area. Availability: The machine is operational and can be inspected immediately. Available from stock, delivery and installation can be arranged on short notice. Price on request, please request our offer.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Nwedjzzvf Aepfx Ab Ujl Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: used, mileage: 48,637 km, power: 130 kW (176.75 HP), color: white, gearing type: automatic, loading space length: 57,200 mm, loading space width: 24,900 mm, loading space height: 22,000 mm, Year of construction: 2023, Equipment: ABS, air conditioning, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (at telephone number). Mercedes-Benz Atego 818 L refrigerated box van + tailgate lift. Tailgate lift: Dautel DL 1000 L (1,000 kg), refrigerated unit ThermoKing V-600 Max, temperature recorder, A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A2Z rear axle differential lock, A5L axle ratio i = 3.417, B1B electronic braking system with ABS and ASR, B1C electronic compressed air supply unit, low, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, C2J wheelbase 4220 mm, C5I fastening parts, for platform body, C6A steering ZF 8090, C6Y stabilizer, under frame, rear axle, C7M protective device, lateral, weight-optimized, C9Y deletion of rear underrun protection (ECE), D1C driver's air-suspended seat, comfort, D1M passenger's fixed seat, simple, D2V armrests, on both sides, driver's seat, D2Y seatbelt control, D3Q seat cover, velour, D4B classic cockpit, D4W power windows, on both sides, D5Y rubber floor mats, driver and passenger side, D6F air conditioning, D6Y pollen filter, D7L storage compartment, above windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0F batteries, Exide, E0Y battery cover, E1H batteries, 2 x 12 V/165 Ah, maintenance-free, E1N generator 28 V/100 A, E4C additional functions, for body manufacturer, E5A switch No. 1 for external body electrical system, E6Z reversing warning, E7F cable remote control for air suspension, E9H pre-installation for tailgate lift control, F1X S cab ClassicSpace, 2.30 m, tunnel, F5L external sun visor, transparent, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7W cab entry, single-step, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, F9A pre-installation, cab parts, body width 2600 mm, G0K driving program economy/power, G1D transmission G 90-6/6.70-0.73, G5G Mercedes PowerShift 3, I0E tires tubeless, 215/75 R 17.5 front/front-outer axle, I4A wheel formula 4x2, I5Q 7.5-ton truck, I6A platform chassis, I6X air suspension, rear axle, J1H instrument panel, 12.7 cm, J1O tachograph digital, 2nd generation, ADR, J1S tachograph manufacturer VDO, J3N Fleetboard Eco Support, J3V Truck Data Center 7, J4X seatbelt warning, with seat occupancy detection passenger side, J5S radio, with USB connection and Bluetooth, J8Y pre-installation for Truck Data Center 7, J9D pre-installation for toll collection, K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5M tanks, lockable, K5S protective cap for AdBlue dosing system, K7I exhaust system, on frame right, tailpipe to the inside, L0A lighting regulations, according to UN-R 48.06, L0Y rear lights wiring harness, extended, L1B daytime running lights, L2H side marker lights, flashing, L9D pre-installation, additional turn signals, M0S noise encapsulation, according to ECE, M1I engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm, M4X engine version Euro VI, E, M5V High Performance Engine Brake, M8Z fuel preheating, O1N Off-Line FHS attachments, O1X integration of CLCS TL function in ASAM, P0L tailgate lift preparation, Atego, Q1C front suspension 3.4 t, parabolic, R0Z wheel nut cover, R1A steep shoulder rims 6.00 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5A speed limiter 90 km/h / 56 mph, ECE, S5Z cruise control, T0G weight variant 7.49 t (3.4/4. Nsdpfxszlbags Ab Uowl

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits Nedpfxjw Ighis Ab Ujwl - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: excellent (used), Original spacer rings 145 Ø x 86 Ø with 1 groove 16.5 mm in various widths, 1 used saw shaft 60 mm Ø with 2 wedges 16 mm wide including 1 sliding bush 120 mm effective clamping length with left-hand threaded clamping nut suitable for right-hand machine and bearing bush for front flap Nwedpfxswaiaao Ab Ujl

Condition: used, mileage: 45,541 km, power: 130 kW (176.75 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total length: 62,200 mm, total width: 25,000 mm, total height: 34,100 mm, Year of construction: 2008, Equipment: ABS, EBS, air conditioning, For vehicle-related inquiries, please contact Mr. Seidel (available by phone at...). Mercedes-Benz Atego 1018 A 4x4 with platform body and tarpaulin Nwjdpfjz Dm Siox Ab Usl !!! Available in multiple units !!!, A70 Front axle differential lock, A71 Rear axle differential lock, AF8 Axle ratio i = 4.875 (H4/H5), AH7 Rear axle H4, 7.7 t, crown wheel 368, AK6 Front axle 6.1 t, B02 Anti-lock braking system (ABS), B43 Trailer brake, 2-line system, B65 Compressed air dryer, heated, BB6 Drum brakes on front and rear axles, BB9 Burst protection for brake system, C42 Stabilizer bar, rear axle, mounted under frame, C57 Protection device, lateral, C95 Omission of rear underrun protection (EC), CC9 Omission of protection device, lateral, CL9 Steering LS 6/LS 8, CR4 Mounting parts on the frame/hole pattern, D15 Roof hatch, pivoting, D17 Turntable, E10 Camouflage light circuit, E21 Battery(ies), reinforced, EC6 Trailer socket, 15-pin, EM8 PSM, superstructure and trailer CAN, ISO 11992, ES8 Additional socket 24 V/15 A, cab railing, F07 Cab, double cab, steel, F20 S-cab, extended by 180 mm, F30 Cab tilting hydraulics, FE5 Electric windows, driver and passenger door, FN1 Distribution cockpit, FQ7 Storage compartment above windshield, 2 compartments, FS9 Exterior mirrors, electric, driver's side, FW2 Omission of immobilizer (transponder), FX7 Front mirror, aerodynamic, front, GC5 Gearbox G 60-6/9.2-1.0, GS1 Manual gearbox, GV5 Transfer gearbox VG550 3W, H03 Air conditioning, H04 Additional thermal insulation, HF2 Pollen filter, I96 Tires 14.5 R 20, front axle, IA1 Wheel formula 4x4, ID1 Leaf spring suspension, IP6 Wheelbase 3260 mm, IU5 10.5-tonner, IX4 Inline engine, 4 cylinders, IY2 Hydraulic fluid, Pentosin CHF 11 S, JD3 Tachograph, digital, EC, speed sensor + additional recorder, ADR, JK3 Combination instrument, graphic display, fuel economy indicator, JZ3 Tachograph manufacturer Actia, K40 Fuel tank lock, K45 Filter, fuel tank filler neck, K81 Fuel pre-filter, heated water separator, KAK6 Front axle 6.1 t, KB56 Front coupling head for air replenishment, KBCA Air reservoir and air dryer mounted offset in the frame, KC57 Lateral protection device / component adaptation, KCAH Bumper, steel design, KCL9 Steering LS 6/LS 8, KCR5 Frame head reinforced for special superstructures, KCUL Underrun protection, foldable, KCUN Overhang adjustment 1135 mm, KCYF Flagpole, KCYQ Towing eyes, front and rear, screwable at the front (not according to STANAG), KCYS Bumper painting, KD15 Round roof hatch, pivoting, KD17 Turntable frame (without turntable), KD6 Exhaust gas monitoring for nitrogen oxides (NOx), KP1 AdBlue tank, 25 l, KP9 AdBlue container, plastic, KQBA Automatic hitch; Size: K2 D/UN763 (for drawbar eyes acc. to VG740), KQD8 Front spring 6.1t, parabolic, KQV1 Trailer coupling, manufacturer Orlandi, KSMA Middle seat with safety belt, foldable, KTBA Weight variant 10.5 t (6.1/6.2), KYEA Bracket for warning flag, KYGG Window camouflage, M31 Air compressor, increased performance, M89 Intake air preheating for cold start, MB1 Engine brake, with constant throttle, MD4 Speed limiter 90 km/h, EC, MD9 Cruise control, MN6 Engine, R4, LA, 130 kW (177 hp), 2200/min, MS4 BlueTec 4 (Euro IV), N80 Gearbox lock for auxiliary drive, NL8 Auxiliary drive MB 60 1c, MPA, NZ1 Auxiliary PTO, single, QH4 Rear spring, 6.2 t, parabolic, QN5 Front spring 4.4 t, parabolic, QS3 Crossmember, retrofitted installation of trailer hitch G135 ZAA, QV1 Trailer coupling, Orlandi, R04 Wheel nut cover, R60 Spare wheel

Condition: used, power: 480 kW (652.62 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,000 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, retarder, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Low noise - Intarder - Air conditioning - PTO - Rearview camera - Tow hitch X TO GO „EUROMIX TO GO“ OFFERS YOU IMMEDIATELY AVAILABLE NEW VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN URGENT NEED. (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT) Your advantages: - Immediately deployable complete vehicles (concrete mixers/dump trucks) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle - Best price-performance ratio - Financing options - Trade-in of your old vehicles MAN TGS 41.480 BB 8x4 EURO 6e Euromix MTP TMK 22m³ Rectangular tipper body Vehicle data Year of manufacture: 2026 New vehicle MAN TGS 41.480 8x4 BB CH Concrete mixer chassis Wheel formula: 8x4 Permissible total weight: 41,000 kg Wheelbase: 2,505 mm Engine: MAN D2676 353 kW (480 hp) 2,450 Nm torque Emission standard: Euro 6e MAN TipMatic 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Cab NN (narrow, medium-length, normal height) Cab color: Pure white (RAL 9010) Engine & Drive MAN D2676 Euro 6e engine 480 hp / 2,450 Nm MAN TipMatic automatic transmission Efficiency driving program Manoeuvring program Idle Speed Driving Rocking function High-performance engine brake MAN PriTarder with MAN EVBec Heated fuel filter Fuel pre-filter with water separator Transmission PTO, switchable Preparation for engine PTO Chassis Wheel formula 8x4 Leaf spring suspension front and rear Front axles 8,000 kg Rear axles 13,000 kg Differential locks on both rear axles Axle ratio i = 3.63 Front, rear and second rear axle stabilizer Emergency steering pump Wheels & Tires Steel rims 9.00 x 22.5 Tires 315/80 R22.5 Tire pressure monitoring system (TPM) Tire temperature indicator Tire pressure indicator for trailer Wheel nut covers Cab & Comfort Cab NN Air-suspended comfort driver's seat with armrests Co-driver's seat with storage box Multi-function steering wheel 12.3-inch professional instrument panel Digital tachograph MAN Media System Advanced with navigation MAN SmartSelect operation MAN sound system Smartphone integration (Apple CarPlay/Android Auto) Online traffic Connectivity board Air conditioning Electrically adjustable and heated exterior mirrors Curb mirror Front mirror Light sensor Central locking Two vehicle keys Several storage compartments Pop-up roof Tinted windshield Safety equipment Electronic stability program (ESP) Anti-lock braking system (ABS) Anti-slip control (ASR) Electronic brake system (EBS) Full brake assist Turning assistant Front detection Traffic sign recognition Driver Monitoring System Reversing motion system Cruise control LED daytime running lights Fog lights Electrically heated mirrors Tire pressure monitoring system Nedpjznuwdofx Ab Uswl Additional equipment ...

Condition: used, power: 480 kW (652.62 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,000 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), hill-start assist, navigation system, onboard computer, power assisted steering, retarder, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Low noise - Speed limiter - Intarder - Air conditioning - Air-suspended seats - PTO - Tow hitch X TO GO "EUROMIX TO GO" OFFERS YOU IMMEDIATELY AVAILABLE NEW VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN URGENT SITUATION (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT). Your advantages: - Immediately deployable complete vehicles (concrete mixer/tipper) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle - Best price-performance ratio - Financing options - Trade-in of your old vehicles MAN TGS 41.480 BB 8x4 EURO 6e EuromixMTP 3-side tipper MAN PriTarder Vehicle data - Year of production: 2026 - New vehicle - MAN TGS 41.480 8x4 BB CH - Concrete mixer chassis - Wheel arrangement: 8x4 - Permissible total weight: 41,000 kg - Wheelbase: 2,505 mm - Engine: MAN D2676 - 353 kW (480 hp) - 2,450 Nm torque - Emission standard: Euro 6e - MAN TipMatic 12-speed automatic transmission - Leaf spring suspension front and rear - Left-hand drive - Cab NN (narrow, medium-length, normal-height) - Cab color: Pure white (RAL 9010) Engine & Drive - MAN D2676 Euro 6e engine - 480 hp / 2,450 Nm - MAN TipMatic automatic transmission - Efficiency driving program - Maneuvering program - Idle Speed Driving - Rocking function - High-performance engine brake MAN PriTarder with MAN EVBec - Heated fuel filter - Fuel pre-filter with water separator - Transmission PTO, switchable - Preparation for engine PTO Chassis Njdpeznvfpofx Ab Uewl - Wheel arrangement 8x4 - Leaf spring suspension front and rear - Front axles 8,000 kg - Rear axles 13,000 kg - Differential locks on both rear axles - Axle ratio i = 3.63 - Front, rear and second rear axle stabilizer - Emergency steering pump Wheels & Tires - Steel rims 9.00 x 22.5 - Tires 315/80 R22.5 - Tire pressure monitoring system (TPM) - Tire temperature indicator - Tire pressure indicator for trailer - Wheel nut covers Cab & Comfort - Cab NN - Air-suspended comfort driver's seat with armrests - Co-driver's seat with storage box - Multifunction steering wheel - 12.3-inch professional instrument cluster - Digital tachograph - MAN Media System Advanced with navigation - MAN SmartSelect operation - MAN sound system - Smartphone integration (Apple CarPlay/Android Auto) - Online Traffic - Connectivity Board - Air conditioning - Electrically adjustable and heated exterior mirrors - Curb mirror - Front mirror - Light sensor - Central locking - Two vehicle keys - Various storage compartments - Lift roof - Tinted windshield Safety Equipment - Electronic Stability Program (ESP) - Anti-lock braking system (ABS) - Anti-slip regulation (ASR) - Electronic Braking System (EBS) - Full brake assist - Turning assistant - Front Detection - Traffic sign recognition - Driver Monitoring System - Reversing Motion System - Cruise control - LED daytime running lights - Fog lights - Electrically heated mirrors - Tire pressure monitoring system Further...

Condition: used, power: 480 kW (652.62 HP), first registration: 01/2026, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, traction control, trailer coupling, - Heated mirrors - Leaf spring suspension - Differential lock - Low noise - Air conditioning - Air-suspended seats - PTO MAN TGS 35.480 BB 8x4 EuromixMTP EM 10 L Registered in: 01/2026 700 km MAN D2676 LFAY, 6-cylinder diesel engine 12.4 liter displacement 480 hp / 353 kW 2,450 Nm of torque Emission standard Euro 6e MAN EVBec high-performance engine brake, steplessly adjustable MAN TipMatic 12.28 OD automatic transmission MAN TipMatic Efficiency driving program MAN TipMatic Offroad driving program Rocking function Axles and chassis 8x4 axle configuration Front axle: 9,200 kg, steered Rear axle: MAN HPD-1382, 13,000 kg, outer planetary axle with through-drive Differential locks on both driven rear axles Axle ratio i = 3.63 Leaf spring suspension front and rear Stabilizer on front and rear axles Emergency steering pump Tires and rims Front axle: 385/65 R22.5, steering/construction site profile Front axle: 385/65 R22.5, steering/construction site profile Rear axle: 315/80 R22.5, drive/construction site profile Rear axle: 315/80 R22.5, drive/construction site profile Steel rims front: 11.75 x 22.5 Steel rims rear: 9.00 x 22.5 Steel rims painted in white aluminum Wheel nut covers on both front axles Braking system and safety Electronic Braking System EBS Anti-lock Braking System ABS Anti-Slip Regulation ASR Electronic Stability Program ESP Full brake assist Emergency Brake Assist EBA Electronic parking brake Spring brake parking brake on the rear axles Additional pneumatic parking brake on the front axles MAN EasyStart hill start assist Disc brakes on both front axles Drum brakes on both rear axles Steel air tank Lateral underride guard Front underride guard Round rear underride guard Cab and comfort MAN NN cab Narrow, medium length and normal height Air-suspended driver's comfort seat with armrests Air-suspended passenger comfort seat with armrests Textile seat covers Multi-function steering wheel, adjustable in height and inclination Instrument panel Professional, 12.3 inches MAN Climatronic air conditioning system Auxiliary heater, 4 kW Automatic windshield wipers with rain sensor Automatic headlight control with light sensor Tinted front and side windows Central locking Two vehicle keys Two sockets, 12 V and 24 V MAN EasyControl with four externally operated functions Washable door interior panel Storage and stowage compartments in the cab rear wall Color scheme Moon Grey Lighting H7 headlights LED daytime running lights H7 fog lights High beam assist LED side marker lights Two LED outline lights Two yellow LED rotating beacons on the cab roof Two LED work lights on the cab roof Preparation for body lighting Electric two-tone horn Njdpfjzuxztsx Ab Uewl Mirrors and camera preparation Exterior mirrors, electrically adjustable and heated Curb mirror right, electrically adjustable and heated Front mirror Design for body widths from 2,400 to 2,600 mm Preparation for two cameras

Condition: new, power: 352 kW (478.59 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth Nwodpeylunrefx Ab Uel - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air-suspended seats - Air horn - Particulate filter - PTO (power take-off) - Radio/multimedia system - Reversing camera - Sun visor - Stability control - Auxiliary heater - Pre-heating automatic - Toolbox - Windscreen Internal number for customer inquiries: 1-521 (reference vehicle) MAN TGS 28.480 6x4-4 with special tipper body and EPSILON Q170L115 loading crane. Specifically designed for tree care applications. MAN TGS 28.480 6x4-4 BL: Driver Comfort Package Plus TGS Trailer package MAN D2676 LFAI diesel engine, 352 kW (480 hp) power, 2,400 Nm torque, Euro 6e Transmission: AN TipMatic 12.28 OD with Retarder 35 Transmission function: MAN EfficientRoll Transmission function: MAN Idle Speed Driving Transmission function: Rock-Free Mode 3rd axle steerable and liftable Suspension type: leaf/air (BL) on front axles and driven rear axles Daytime running light, LED Fog lights, H7 2 outline marker lights, LED Roof beacon, halogen, yellow, with function monitoring Work lights, LED, white MAN EasyControl operation panel, 4 functions, can be operated from outside when door is open Oil box, midsection, rearward MAN Mediasystem Navigation Advanced 7 inch MAN Soundsystem Advanced Tipper Body: Steel tipper body type 6024: - Dimensions: 5,954 x 2,381 x 2,538 mm / External height approx. 3,800 mm - Floor plate: 5 mm, HARDOX 450 - Side walls: 4 mm all round, HARDOX 450 - Front wall: 4 mm, HARDOX 450 Crane: EPSILON Q-Series Loading Crane - Q170L - EPSILON loading crane with high seat - Rated HC1/HD4/B4 - Lifting cylinder protection - Integrated operating hours counter and service interval display - Mounting hardware, surface treated against corrosion - Clamps 8x M30x1.5x1000 mm, mounting plates, nuts, protective caps QL97_1 - L-arm system 9.7 m, special conversion to QL11.50_1 - L-arm system 11.5 m - Double telescopic extension - Outreach: 11.5 m - CEH-N7_1 - CE wood package with N7 for the DE safety package wood - Compliant with EN12999 for timber cranes - 7° safety shutdown with tilt switch - Start-stop with emergency stop - RPM adjustment +/- - Seat heating Financing / hire purchase as well as leasing / partial amortisation leasing available through our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and modifications. General information Cab: Local traffic Technical information Number of cylinders: 6 Engine capacity: 12,419 cc Gross vehicle weight: 26,000 kg Axle configuration Brakes: Drum brakes Front axle: Tyre size: 385/65-22.5; Steered; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80-22.5; Differential lock; Suspension: air suspension Rear axle 2: Tyre size: 385/65-22.5; Lift axle; Steered; Suspension: ...

Condition: used, Rühle MPR 220 Vacuum Tumbler The Rühle MPR 220 refrigerated vacuum tumbler is a versatile machine for mixing, maturing, salting, marinating, and seasoning products. Its drum can be tilted to various positions. Gentle processing helps protect the product, while a scraper ensures that the contents are mixed thoroughly throughout the drum. The double-walled, insulated drum is directly cooled. The machine can process a range of fresh and frozen products, including meat, fish, poultry, game, seafood, nuts, cheese, spices, vegetables, and fruit. It is suitable for use in meat and fish processing plants, bakeries, and the convenience food, snack, salad, cheese, plant-based, baby food, pet food, fruit, and vegetable industries. The vacuum tumbler is made entirely of stainless steel. Capacity: 220 L Programming: via tablet Nwedpfx Asz D A H Aob Usl Mixing arm speed: continuously adjustable Vacuum system: Busch, 16 m³/h Power supply: 400 V (3 + N, 50/60 Hz) Power: 4.2 kW Weight: 662 kg Dimensions (W × D × H): 1210 × 950 × 1590 mm

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Nsdpfx Asd Swtaob Ujwl Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2026, New machine Vertical broaching machine VADARI GmbH TYPE SRM 2027-60 KN - 90 KN or 120 KN also possible! BROACHING MACHINES MADE IN GERMANY. Currently available at top special conditions! Note: The machine can also be offered and manufactured in a version with a pulling force of 90 KN (9 tons) or 120 KN (12 tons). ==> Information for manufacturing companies or dealers with their own manufacturing: If desired, the drawings, rights, spare parts, customer and prospect data, planning and manufacturing documents (including plans for a version with a 9-ton pulling force) for the broaching machine can be purchased from us. Please contact us if you are interested. ==> The new machines are manufactured by us according to customer order. Short-term production & delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for short-term delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special broaches for internal gears, etc.) and accessories available. Please inquire separately. All broaching tools and broaching arbors from other manufacturers can be used with our broaching machine! Complete manufacturing and assembly at our plant in Germany. We also offer spare parts for Wolff and VADARI - SRM broaching machines (spindles, spindle nuts, motors, gears and all other required components - including electrical parts). Vertical broaching machine Type SRM 2027 - NEW MACHINE: 60 KN version: The range of applications is primarily in the production of keyway grooves from 3-28 mm (but also beyond) and profiles of similar dimensions. The compact and space-saving machine can therefore be successfully used in small, medium and large companies. The low price justifies the purchase even for small series and individual production. The drive is via a pole-changeable geared brake motor. The maintenance-free double spindle drive ensures smooth operation and a central pulling point, as well as constant cutting performance. The free tool table allows even large workpieces to be placed without hindrance. In most cases, the workpieces to be broached do not need to be firmly clamped. Stroke adjustment is carried out by adjustable limit switches with stroke limitation. For short hubs/workpieces, several workpieces can be placed on top of each other. Broaching mandrels, arbors and spare parts on request. Technical data: Pulling force: 60 KN at 3 m/min, 40 KN at 6 m/min. Broaching speed: 3 m/min + 6 m/min. (Optional: stepless speed adjustment (from 0 m/min to 6 m/min possible via extended electronics) Return speed: 6 m/min. Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350 mm Table through-hole: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Overall height of the machine: 1510 mm Drive power: 3.7 / 4.4 KW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Nwjdpjuqbnhsfx Ab Uel Painting: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and has the CE marking.

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Nedpop Atipjfx Ab Ujwl Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: excellent (used), Year of construction: 1977, overall weight: 370 kg, Ayen automatic nut runner with a large number of tools. Nwsdpfx Abez Ekqls Ujl

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Nwjdpfstqfhxjx Ab Uel Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. Njdpfxex Twcce Ab Uswl * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.