Used Thibaut T55 Advance for sale (3,228)

Condition: like new (used), TA Instruments Discovery HR-1 – Hybrid Rheometer with Temperature Chamber Technical description of the device Manufacturer: TA Instruments, USA Model: Discovery HR-1 Series: Discovery Hybrid Rheometer Device type: Rotational-oscillatory rheometer Temperature system: Two-wing heating chamber, possibly an ETC (Environmental Test Chamber) Technical characteristics The TA Instruments Discovery HR-1 is an advanced hybrid rheometer designed for the precise investigation of the rheological properties of liquids, semi-finished products, polymers, pastes, gels, and viscoelastic materials. The device enables measurements in controlled stress mode, controlled shear rate mode, and oscillatory testing. The rheometer's design utilizes a precise drive system, a torque measurement system, and a gap control system. Technical parameters – Discovery HR-1 The following values are approximate catalog parameters for the HR-1 model and require confirmation for a specific device version. Parameter | Value ----- | ----- Type of measurement | Rotational and oscillatory Minimum oscillatory torque | approx. 0.5 nNm Minimum rotational torque | approx. 10 nNm Maximum torque | 150 mNm Angular speed range | up to 300 rad/s Oscillatory frequency range | up to 100 Hz Angular displacement resolution | approx. 10 nrad Gap control | Automatic Control modes | Stress, shear rate, oscillation Computer control | TA Instruments TRIOS software Temperature control system The device shown in the pictures is equipped with a two-part heating system that opens to the sides. The chamber enables rheological measurements to be carried out under controlled temperature conditions. System characteristics: * Two-wing design of the heating chamber. * Electric heating system. * Temperature control of the sample. Gsdpfsx E Sm Hox Ag Souh * Possibility of conducting temperature studies. * Thermally insulated chamber elements. * Connections for the temperature control system. If the use of an ETC chamber is confirmed, the typical temperature range may be approximately -160°C to +600°C, depending on the configuration, cooling system, and accessories used. This range is not confirmed for the offered unit. Available research methods Rotational studies: * Viscosity measurement as a function of shear rate. * Determination of flow curves. * Study of the yield point. * Analysis of the behavior of non-Newtonian materials. Oscillatory studies: * Measurement of the storage modulus G'. * Measurement of the loss modulus G''. * Analysis of the loss tangent tan δ. * Frequency tests. * Amplitude tests. * Analysis of structural transitions of materials. Time and temperature studies: * Creep and recovery tests. * Stress relaxation. * Thermal stability studies. * Analysis of changes in rheological properties as a function of temperature and time. Configuration of the offered device Based on the photographic documentation, the set includes: 1. TA Instruments Discovery HR1 rheometer 2. Two-wing temperature chamber. 3. Accessories visible in the pictures 4. PC and software The device is a professional measurement platform designed for advanced rheological analyses in industrial and scientific laboratories.

Condition: ready for operation (used), Year of construction: 2024, laser power: 20,000 W, travel distance X-axis: 9,050 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 120 mm, number of axes: 6, This 6-axis CUTLITE PENTA PLUS LM 9030 was manufactured in 2024. It features a powerful 20,000 W RAYCUS fiber laser with an impressive X-axis working range of 9,050 mm and Y-axis working range of 3,050 mm. The machine includes advanced capabilities such as a BEVEL autofocus cutting head and a double pallet system. If you are looking to get high-quality cutting capabilities, consider the CUTLITE PENTA PLUS LM 9030 fiber laser cutting machine. Contact us for further details. • Laser source: RAYCUS Fiber Laser • Working range: • BEVEL working area: 8,500 × 2,500 mm • Dynamics: • Maximum speed: 140 m/min • Maximum acceleration: 2.5 G • Precision: • Mechanical accuracy: ±0.05 mm / 500 mm • Position repeatability: ±0.02 mm • Cutting head / axes: • BEVEL autofocus cutting head • B/C-axis rotation range: ±45° • Non-contact capacitive sensor • Automatic focus adjustment • Maximum assist-gas pressure: 20 bar • Automatic nozzle cleaning and capacitive sensor calibration • Control: • CNC: D.Electron Florenz Z32 Guodpfxsz I Rlhe Ag Soh • Machine supervision: Smart Manager 6 • Industrial PC with Windows 11 • 22" Full HD touchscreen • Connectivity: Ethernet, USB 3.0, Wi‑Fi • Industry 4.0 / MES integration capability • Installation requirements: • Power supply: 400 V • Recommended compressed-air pressure: 10 bar • Assist gases: Oxygen / Nitrogen / Air Additional equipment • Automatic LIFT pallet changer • Double pallet system • Chiller • Compressed-air filter • Internal monitoring camera • Standard fume extraction system • Automatic assist-gas change • Automatic sheet recognition • Lantek post processor for BEVEL cutting • Full-table protective enclosure

Condition: ready for operation (used), functionality: fully functional, Konica Minolta Accurio Press C 4070 with only 670,000 copies, in very good condition, tested, and ready for production! This highly equipped machine is ideal for cutting, long banner printing, business card production, side and cross trimming, creasing, and advanced folding for professional booklet production. It is equipped with the IQ-501 Intelligent Quality Optimizer for automatic color calibration and precise color consistency. The machine is in excellent condition, with a very low copy count and minimal usage. Equipment: FS 532 RU 518 m IQ 501 + Video interface PF 707 m TU510 SD506 LU202 XL IC609 DF713 Godpfxjz Nxb Ie Ag Souh As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping to guarantee that our customers receive machines in perfect condition. We ship copiers that originate from and have been maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries on request. Please do not hesitate to contact us for further information.

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces: Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm. -Minimum Material Width: 250 mm. Godpfx Asrt Tpnog Sjuh Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency...

Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Processing System: Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications. -Material Compatibility: -Mild Steel, Aluminum, Stainless Steel. -Working Thickness Range: -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements Gujdpfx Agji E Tkaj Ssh Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. Guodpfetmrkrex Ag Seh -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: ready for operation (used), Year of construction: 2020, total height: 2,700 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 2,350 kg, product length (max.): 2,100 mm, number of axes: 3, This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. • Max. distance between table and probe holder (without probe): 668 mm • Max. distance between columns at table height: 650 mm • Usable granite slab area: 650 x 1700 mm • Max. loadable workpiece weight: 650 kg Gusdpfx Aox D Hvqjg Sjh Additional equipment • PH10MQ touch probe system with SP25M-2 • FCR25-L6 touch probe changer • ARCO Presoft software

Condition: new, functionality: fully functional, mileage: 1 km, power: 44.13 kW (60.00 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: yellow, overall weight: 4,200 kg, empty load weight: 4,200 kg, operation weight: 4,200 kg, maximum load weight: 1,900 kg, lifting power: 1,900 kg/m, lifting height: 6,015 mm, tire size: 400/60-15.5, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 4x4, number of seats: 1, first registration: 01/2026, emission class: euro5, mast type: telescopic, brakes: other, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: GG1900T, Equipment: additional headlights, all wheel drive, cabin, hydraulics, Telehandler GG1900T Gsdpjytymiofx Ag Souh The GG1900T telehandler from Gunter Grossmann is a powerful and versatile machine, engineered to deliver outstanding performance in demanding sectors such as construction, agriculture, and manufacturing. Built with advanced technologies and robust components, it guarantees high efficiency, reliability, and operator comfort, even on challenging terrain. Engine and Power – Reliable Performance Powered by a 61 HP (45 kW) Yuchai engine, the GG1900T delivers ample power for handling heavy loads and completing tasks quickly and efficiently. This reliable engine contributes to the machine's durability and ensures consistent performance during demanding workdays. Hydraulics and Steering – Precise Control The articulated hydraulic steering system provides precise manoeuvrability, especially in confined spaces. With a hydraulic working pressure of 16 MPa, the system offers powerful and responsive control, enhancing both safety and comfort during operation. Working Range and Lifting Capacity – Excellent Efficiency The GG1900T has a lifting capacity of 1,900 kg and a bucket capacity of 0.8 m³, ensuring efficient material handling. With a maximum lifting height of 5,680 mm, it offers versatility and precision for a wide range of applications in diverse environments. Operator Safety and Comfort – Advanced Features Designed with the operator in mind, the GG1900T features an adjustable steering wheel for ergonomic control, LED headlights for improved visibility in low-light conditions, and a reversing camera for enhanced safety during manoeuvres. Hydraulic disc brakes and a four-wheel drive system guarantee stability and control on all terrains. Technical Specifications Engine model: Yuchai Rated power: 61 HP (45 kW) Total machine weight: 4,200 kg Lifting capacity: 1,900 kg Pressure: 16 MPa Fuel tank capacity: 60 L Steering system: Articulated hydraulic steering Drive system: Four-wheel drive Hour meter: Yes Tyre size: 400/60-15.5 Work light: LED Reversing camera: Yes Steering wheel: Adjustable Mechanical joystick: Yes Brake system: Hydraulic disc brake Maximum speed: 20 km/h Wheel diameter: 920 mm Bucket capacity: 0.8 m³ Maximum lift height: 5,680 mm Mid lift height: 4,450 mm Minimum working height: 3,450 mm Overall length (with extended equipment): 6,015 mm Width: 1,900 mm Overall height (folded position): 2,620 mm Ground clearance: 400 mm Wheelbase: 3,259 mm Distance from front axle to end of equipment: 1,500 mm Distance from rear axle to end of machine: 2,359 mm Minimum height with boom lowered: 1,652 mm Base length (without equipment): 5,115 mm

Condition: new, functionality: fully functional, power: 80.9 kW (109.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 8,000 kg, empty load weight: 8,000 kg, operation weight: 8,000 kg, maximum load weight: 2,500 kg, lifting power: 2,500 kg/m, lifting height: 2,800 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Excavator Loader GG30BC Excavator Loader The GG30BC excavator loader is a robust and reliable machine designed for construction and industrial applications. With a loading capacity of 2,500 kg and an operating weight of 8,000 kg, this machine delivers outstanding stability and efficiency. The loader bucket, with a width of 2,200 mm and a capacity of 1.3 m³, ensures fast and effective loading. Engine and Drive System The machine is equipped with a modern YUCHAI YCF36110-S500 engine (81 kW). The mechanical transmission with fixed drive axle features 2 forward and 2 reverse gears, providing optimal control of the vehicle. The maximum travel speed is 24 km/h, enabling efficient transportation around the jobsite. Hydraulics and Brake System The advanced hydraulic system operates at a pressure of 22 MPa and delivers a digging force of 46.5 kN for the grab and 31 kN for the bucket. The standard digging depth is 4,000 mm, extendable to 5,500 mm with an optional telescopic arm. The machine is fitted with a pneumatic-hydraulic braking system including an emergency stop function, significantly enhancing operational safety. Working Range and Dimensions The GG30BC provides a dump height of 2,800 mm, a reach of 1,062 mm, and a swing angle of 190°. The maximum tractive force is 39 kN, and the breakout force is 38 kN. A minimum ground clearance of 300 mm ensures excellent performance on challenging terrain. The machine dimensions are 7,600 × 2,260 × 2,890 mm, with a turning radius of 6,581 mm at a steering angle of ±36°. Engine model: Euro 5 YUCHAI ENGINE-YCF36110-S500 Rated power: 81 kW (110 hp) Operating weight: 8,000 kg Loading capacity: 2,500 kg Transmission type: Mechanical transmission with fixed power drive Gears: 2 forward / 2 reverse Maximum speed: 24 km/h Tyres: (F) 14-17.5 (R) 19.5L-24 Steering brand: FEICHENG YUNYU Steering system working pressure: 12 Pa Front tyre pressure: 0.22 MPa Main transmission type: Reduction Final drive: Single-stage final reducer Brake system control: Pneumatic brake clamp over oil, external, self-regulating, self-balancing Hydraulic system pressure: 22 MPa Digging force (grab): 46.5 kN Digging force (bucket): 31 kN Brake type: Self-levelling Emergency brake control: Manual – parking brake with end force Bucket capacity: 1.3 m³ Bucket width: 2,200 mm Dipper bucket capacity: 620 mm Loader dump height: 2,800 mm Loader dump reach: 1,062 mm Maximum digging depth: 4,000 mm Optional digging depth: 5,000–5,500 mm (with telescopic arm) Minimum turning radius: 6,581 mm Digging arm swing angle: 190° Maximum tractive force: 39 kN Breakout force: 38 kN Minimum ground clearance: 300 mm Wheelbase: 2,250 mm Steering angle: ±36° Working pressure: 12 MPa Length: 7,600 mm Guodpfx Aoxr Ru Hsg Ssh Width: 2,260 mm Height: 2,890 mm

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Guedpfewk Dw Ujx Ag Ssh The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: ready for operation (used), Year of construction: 2006, Bobst SP102-BMA Foilmaster Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Gusdpfx Agowgz Rke Seh Max speed: 7,500 p/h

Condition: used, A fully operational metal processing company is for sale, complete with all production equipment, a customer base, and ongoing orders. This is more than just a sale of equipment – it’s the transfer of a thriving business with a current workforce of 6 employees. Production is uninterrupted; the company fulfills existing orders, operates on a subcontracting basis, and has secured future contracts through won tenders. The company boasts a modern equipment park, mostly from 2024-2026, allowing it to perform the entire main cycle of sheet metal processing: laser cutting of sheets and tubes, bending, laser and conventional welding, grinding, and other metal processing operations. Production Facilities The premises are rented under favorable terms: Production space: approximately 400 + 600 m² An additional second floor is available, offering approximately 800 m² for further expansion Overhead cranes are installed in the premises Low rental cost Main Production Equipment 2026 HN-6020 Sheet Metal Laser Cutting Machine Laser power: 12 kW Working format: 6000 × 1500 mm Metal thickness to be cut: up to 10 mm 2025 Hongnili Tube Laser Cutting Machine Raycus laser source Laser power: 3 kW Tube length: up to 6 m Wall thickness to be cut: up to 10 mm 2025 LEMANS B320/4 Bending Press Equipped with bending press tooling 2024 Hongniu HN-3000W Laser Welding Machine Power: 3000 W Other Production Equipment Automatic grinding machines for parts after laser cutting Bevel grinding machine Band saw Welding machines Various production tools and auxiliary equipment A significant stock of sheet metal is available in the warehouse Transportation and Handling Equipment Electric Jungheinrich forklift Diesel Linde forklift Volkswagen Crafter cargo van Included with the company: The entire operational company is for sale, including production equipment, an existing customer base, ongoing projects and orders, won tenders, subcontracting activities, a team of 6 employees, metal stock, transportation, and other equipment and tools necessary for production. This is an opportunity to take over an already functioning metal processing company and continue production immediately, without the need to build a production base and assemble equipment from scratch. We will provide more information about the company, equipment, and sale conditions upon request. Gjdpfx Ajz A Rwasg Souh The company and the operational production can be viewed in advance by appointment. I have not specifically mentioned the company name, location, and sale price here – it is quite logical in this type of advertisement to reveal some information only to a serious buyer. Once we have the exact names/models of the laser manufacturers and the parameters of the LEMANS press, we can further refine the technical details.

Condition: good (used), Year of construction: 2011, operating hours: 23,130 h, functionality: fully functional, Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: 23,130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Gsdpfx Aez I Ra Esg Sjuh Throughput / mixed paper: 15 t/h Tying: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,000 h, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,600 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 46, tool weight: 8,000 g, number of axes: 5, This 5-axis MIKRON HPM 1350 U was manufactured in 2019. It features an impressive X-axis travel of 1350 mm, Y-axis travel of 1150 mm, and Z-axis travel of 895 mm. The machine includes a robust rotary table with a diameter of 1100 mm and a maximum table load of 1600 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON HPM 1350 U universal machining centre we have for sale. Contact us for further details. Guodpfx Agoz R A Tdj Soh - Control Unit: Heidenhain iTNC 530 HSCI FS (MC 6541 with HDR and Core i7-3 1.7 GHz dual-core processor, 15.1" color TFT)- X-Axis Travel: 1350 mm- Y-Axis Travel: 1150 mm- Z-Axis Travel (Horizontal Spindle): 895 mm- Z-Axis Travel (Vertical Spindle): 700 mm- Motorspindle Overhang to Z-Axis: 700 mm- Swivel Axis A Range: +16° to -120° (136° total range)- Rotary Axis C Range: n x 360°- Simultaneous Axes: 5 / 5 simultaneous- Rotary Table Diameter: Ø 1100 mm (flattened on 2 sides to 1000 mm)- Table Centering: Ø 50 H6- T-Slots: 9 slots, 100 mm distance, 18 H12 width- Max. Table Load (Centered): 1600 kg- Table Clamping Moment: 8000 Nm- Table Drive Torque (100% ED / Max): 1130 Nm / 2300 Nm- Max. Table Speed: 40 rpm- Rapid Feed / Feed Rate (X, Y): 15 / 32 m/min- Rapid Feed / Feed Rate (Z): 15 / 32 m/min- Swivel Rate Feed / Rapid (A-Axis): 11 / 20 rpm (4000 / 7200 °/min)- Max. Feed Force: 10 kN- Acceleration: 4 m/s²- Spindle Speed: 0 - 15,000 rpm- Spindle Taper: HSK-A63 (DIN 69893-1)- Spindle Power (S6 40% ED): 38 kW- Spindle Torque (S6 40% ED): 193 Nm- Tool Magazine Capacity: 46 positions (HSK-A63)- Max. Tool Diameter: 80 mm (fully loaded) / 130 mm (partially loaded)- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Magazine Load: 200 kg- Chip-to-Chip Time: approx. 11 s- Coolant & Chip Management: Chip conveyor with Internal Coolant Supply (IKZ 18-80 bar, frequency-regulated), 30 µm band filter unit, hand wash station- External Coolant Supply: 7 bar, 28 l/min- Air Blast Through Spindle: Yes (up to 10 bar)- Measuring & Calibration Systems: Renishaw OMP60 HSK-A63 3D Infrared Touch Probe, Renishaw NC4 2-piece Laser Tool Measuring System, KinematicsOpt- Smart Machine Features: APS (Advanced Process System), ITC (Intelligent Thermal Control), DNC Remote Network Access, rConnect Live Remote Assistance- Operating Hours:* Control On (Steuerung ein): 46,889 h 58 min 07 s* Machine On (Maschine ein): 42,786 h 48 min 49 s* Program Run (Programmlauf): 9,929 h 46 min 01 s* Drives On (Antriebe Ein): 34,546 h 44 min 31 s* Spindle On (Spindel Ein): 5,660 h 25 min 27 s- Maintenance / Repairs Log Highlights:* Spindle replaced on 10.11.2021 (GF Spindle f. 2/782) with new assembly on 29.11.2021* Hard drive replaced on 23.12.2022* Drive unit replaced on 24.05.2023* Rotary feedthrough (Drehdurchführung) replaced on 07.09.2023* A-axis aligned and spindle adjusted on 21.02.2026- Operating Voltage: 3x 400 V (+6%/-10%), 50 Hz- Connected Load: 67 kVA / 61 kW (with IKZ)- Fusing: 125 A- Compressed Air Supply: 6 + 0.5 bar, approx. 300 l/min Technical Specification Taper Size HSK 63

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Technical Specifications Paper Size: Width: 210–370 mm, Length: 210–670 mm (extendable up to 1,000 mm) Paper Weight: 110–350 g/m² (coated, uncoated, and laminated paper) Guodpoz Rz D Ujfx Ag Ssh Processing Capacity per Sheet: Up to 8 longitudinal cuts (6 standard, expandable to 8 with an additional module), 30 cross cuts, and 20 creases in a single pass Speed: 30 sheets per minute (A4, short-edge feeding, 2 cuts, 1 crease) Feeding and Stacking: Input tray capacity: 100 mm; Output stacker capacity: 140 mm Dimensions: 2,310 mm (W) × 1,005 mm (D) × 1,110 mm (H) – operating configuration Weight: 275 kg Connectivity: USB 2.0 with standard PC Controller software Product Description The Duplo DC-646 Slitter/Cutter/Creaser is a premium print finishing solution designed for medium- to high-volume digital print providers. Engineered to handle demanding production tasks with ease, it combines slitting, cutting, creasing, and optional perforating in a single pass, making it ideal for producing business cards, menus, brochures, and direct mail materials. The DC-646’s advanced feeding system ensures accurate and reliable paper handling, while its CCD camera and barcode reader automate job setup for seamless production. Its modular design allows for customization, including the use of rotary tools for creasing and micro-perforating, providing print service providers with the flexibility to meet various finishing requirements. With a processing speed of up to 30 sheets per minute, the DC-646 increases productivity while minimizing manual intervention. Equipped with PC Controller software and the ability to store an unlimited number of jobs, it enables quick job changeovers and consistently precise results, saving print service providers valuable time and resources while delivering professional-quality finished products.

Condition: used, Weiss Type: WT3-600/70/5 Weiss temperature testing cabinet WT3-600/70/5 water-cooled version with S!MCON / 32 control system and touch panel Control panel "Touch Panel" By simply touching the function symbols on the "Touch Panel" control panel, all control and operating commands can be activated. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing cabinet is equipped with adjustable feet. Gsdpfx Aoy Nibpsg Sjuh Feedthroughs The testing cabinet is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard: R1: DN 125 mm L1: DN 50 mm Test chamber volume: approx. 600 liters External dimensions including hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions excluding hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Data for temperature tests: Temperature range: -70 °C to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 7.5 K/min Cooling: 7.5 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: approx. 23 A Rated power: approx. 13 kW On-site fuse protection: 16 A slow-blow Sound pressure level: Measured at a distance of 1 m in front / 1 m height: approx. 58 dB(A) Refrigerant: R-404A / R23 Weight: approx. 620 kg For your safety as a buyer, here is the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: refurbished (used), functionality: fully functional, Refurbished, four-piston hydraulic platen press of Italian manufacture. Branded veneer press for easy veneering of wood. Dimensions of veneer sheets: 2500 x 1300 mm Pressure at full area: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic pistons: 4 MYLAR Teflon film on the platens Gjdpfoyi U Rnjx Ag Ssuh Preparation for heating the platens with water Option to install a hot water boiler Price: 6,630 EUR excluding VAT The condition after refurbishment and the machine's readiness for delivery must be verified in advance! In stock in Telnice near Brno, Czech Republic. Testing, demonstration of the machine, and operator training are standard services.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. Guedpfx Agsz R Aa Re Seh - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each

Condition: used, Weiss   Type: WK-600/70 (I)-(II) 2 G EEx /22605147   Weiss Climate Chamber, Water-Cooled   (Test chamber, explosion-proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER   Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Test chamber volume: approx. 600 liters   Cold / Heat operation -70 to 180°C   Climate operation 10 – 95°C Humidity 10...98 % RH Temperature change per unit of time Cooling approx. 2.5 K/min Heating approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse, customer-supplied: 32 A slow-blow Permissible test item weight Total load of the grid supports 80 kg   Test chamber floor 80 kg, insert grid 40 kg   Weight: 800 kg   Refrigerant: R 404A/R 23   (Evaporator of the air conditioning system has been replaced)   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and information are subject to change!)   Gujdezh D Ryopfx Ag Soh We will gladly answer any further questions you may have by phone.

Condition: used, CTS   Type: T-30/950 Ex/I   CTS Temperature Test Chamber, Explosion-Proof   Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site control of the test item   Temperature tests:   Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate:   Heating: 2 K/min Cooling: 1.5 K/min up to -10°C   Heat radiation: approx. 1000 W at +20°C approx. 200 W at -25°C   Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is initially purged with a large volume of N2 until the oxygen content is less than 3%. After that, it switches to a base flow rate (approx. 10% of the large volume). The nitrogen flow rate of the base flow is measured, displayed, and monitored using a flow meter and limit switch. The O2 monitoring continuously extracts gas from the test chamber via a flame arrester and feeds it to an O2 sensor, which monitors the residual oxygen content of the extracted air. The gas is then passed through a second flame arrester and returned to the test chamber. The extraction pump is monitored using a volume flow meter. Further details can be found in the operating manual from Dräger in the appendix.   The gas system is currently out of operation!   The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without irradiation, and without additional equipment.   Dimensions: Test volume: 950 liters Test chamber dimensions: height approx. 700 mm / width approx. 900 mm, depth approx. 1500 mm External dimensions: height approx. 2400 mm / width approx. 1270 mm, depth approx. 3125 mm   Operating data:   Electrical connection: 400V+6/-10 %, 3/N, 50 Hz Rated power: 21.6 kW Rated current: 36.5 A   Protection class: IP 54   Condensate drain: unpressurized, R 1/2" internal thread   Sound pressure level: < 62 dB(A)   (according to DIN EN ISO 3744 measured at a distance of 1 m from the front)   Weight: approx. 1500 kg, control cabinet approx. 300 kg   External refrigeration unit   Refrigerant: R404A / R23   For your security as a buyer, the following information:   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and specifications are subject to change!) Gusdpfx Agezd Rzwo Ssh   We are happy to answer any further questions by telephone.

Condition: used, Weiss   Type: WT-600/70   Weiss Temperature Test Chamber, Water-Cooled   Technical Data: Test chamber designation: WT-600/70   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm Guodpfszd R Drex Ag Ssh   Internal dimensions:   Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   Cooling / Heating operation -70°C to 180°C   Temperature change per unit of time Cooling down approx. 2.5 K/min Heating up approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on customer side: 32 A, slow-blow Permissible test item weight Total load of the shelf supports 80kg   Test chamber floor 80kg, insert shelf 40kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VTS³ 7018-5 Temperature test cabinet, water-cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 900 mm x Depth 1550 mm x Height 1850 mm Temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: Cooling 7.5 K/min Test chamber volume: 190 liters Gjdpfx Agozfg Ucj Ssuh Rated voltage: 400V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerant: R404A and R23 For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Vötsch Temperature testing chamber / Climate testing chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system features a programmable controller, a stainless steel test chamber, air cooling, and a side access for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Device type: Temperature testing chamber / Climate testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 5.44 K/min Temperature change rate, cooling: approx. 4.81 K/min Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Standing pressure: 15 bar Permissible operating overpressure: 25 bar Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A External dimensions according to manufacturer's drawing (W × D × H): approx. 950 × 830 × 757 mm Weight: approx. 150 kg Test specimen access: approx. Ø 80 mm Equipment: Programmable controller Temperature control Air-cooled design Stainless steel test chamber Side access for test specimens RS232 interface RS485/RS422 interface Digital I/O Potential-free contact Program operation and manual operation Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Aging and stress tests Condition: Used Optical condition as shown in the pictures With signs of wear and tear due to age and use Scope of delivery: 1x Vötsch VT 7004 temperature testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Guedpfx Aez R Nrzsg Sjh Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: as good as new (ex-display), Year of construction: 2026, SHIBAURA EC 450 SXIII-26AT ELECTRIC INJECTION MOLDING MACHINE Year of manufacture: 2026 Manufacturer: SHIBAURA MACHINE CO., LTD. – Japan Model: EC 450 SXIII-26AT Machine type: Fully electric injection molding machine Gjdjz Rldxopfx Ag Ssuh Clamping force: 450 tons (4500 kN) Location: Wrocław, Poland Availability: Machine available for immediate delivery, viewing possible at the PIMM showroom CLAMPING UNIT Clamping force: 450 tons (4500 kN) Column spacing (H × V): 870 × 810 mm Platen dimensions (H × V): 1230 × 1160 mm Mold opening stroke: 800 mm Maximum daylight between platens: 1800 mm Minimum mold height: 350 mm Maximum mold height: 1000 mm Ejector force: 127 kN Ejector stroke: 180 mm i26 INJECTION UNIT Screw diameter: 70 mm Injection volume: 1340 cm³ Injection weight (PS): 1230 g Injection weight (PE): 980 g Injection pressure: 190 MPa (1900 bar) Injection speed: 160 mm/s Injection rate: 615 cm³/s Plasticizing rate (PS): 260 kg/h Screw torque: 2580 Nm Nozzle closing force: 44.1 kN MACHINE WEIGHT AND DIMENSIONS Machine weight: 22,500 kg Machine length: 8100 mm Machine width: 2200 mm Machine height: 2300 mm COMMERCIAL DESCRIPTION We offer a fully electric SHIBAURA EC 450 SXIII-26AT injection molding machine, manufactured by the renowned Japanese manufacturer SHIBAURA MACHINE. The machine utilizes advanced electric drive technology, ensuring high precision, repeatability of the injection process, and the ability to reduce energy consumption compared to traditional hydraulic solutions. The injection molding machine is available in our showroom in Wrocław, where you can view it and learn about its technical capabilities. We also offer comprehensive support for transportation, installation, commissioning, and operator training. Machine available for immediate delivery. We invite you to contact us and arrange a viewing.

Condition: used, Year of construction: 2026, CORMAK WRHS 1610 Mast Pallet Truck is a professional device designed for fast and efficient lifting and transporting of heavy loads in warehouses, production halls, and other industrial environments. Thanks to its advanced construction and high-quality components, this mast pallet truck provides reliability, efficiency, and safety during daily operations. Its main advantages are a high load capacity and significant lifting height, making it an ideal solution for handling pallets and working as a pallet stacker in various industrial applications. Main advantages of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck has been designed for demanding users who require durability, high performance, and operational safety. Its robust construction and functional solutions make it an essential tool for warehouse operations. Key benefits: High load capacity – a maximum lifting capacity of 1000 kg allows the truck to handle heavy pallets and large-sized loads efficiently. Lifting height of 1600 mm – enables convenient storage of goods on warehouse racks, helping to optimize available storage space. Polyurethane wheels – high-quality wheels provide smooth movement, quiet operation, and long service life, even under demanding warehouse conditions. Ergonomic design – the mast and handle are designed for operator comfort, allowing easy handling while reducing physical strain. Durable and stable construction – the strong steel mast ensures stability during lifting and lowering operations, guaranteeing reliable and safe performance. Construction and technology of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck combines high-quality workmanship with modern technical solutions. Mast construction The mast is made of high-quality steel, providing excellent resistance to mechanical damage. Its rigid design ensures load stability and safe transportation during lifting operations. Wheels and rollers The truck is equipped with durable polyurethane wheels with dimensions of 180 × 50 mm and fork rollers measuring 74 × 70 mm. These components ensure smooth, quiet, and stable movement on various types of surfaces. Gusdpfx Aez Rw Trjg Sjh Ergonomic operator handle The manual control handle has been designed to provide comfortable operation and easy maneuvering, even in narrow warehouse aisles. Advanced lifting system The WRHS 1610 features: Two lifting options: manual and foot-operated lifting Stepless fork lowering speed adjustment Truck locking system Brakes on both steering wheels for improved safety and stability during operation Standard equipment Load capacity: 1000 kg Lifting height: 1600 mm Steel mast with reinforced construction Polyurethane steering wheels Fork rollers for smooth movement Manual and foot-operated lifting system Adjustable fork lowering speed Locking system and brakes on both steering wheels Ergonomic operating handle Technical specifications Parameter Value Load capacity 1000 kg Lifting height 1600 mm Fork dimensions (L × W) 1150 × 145 mm External fork width 550 mm Distance between forks 230 mm Height with lowered forks 1970 mm Height with raised forks 1970 mm Minimum fork height 90 mm Overall length 1630 mm Overall width 740 mm Turning radius 1400 mm Steering wheels 180 × 50 mm Fork rollers 74 × 70 mm Weight 181 kg ATTENTION!!! Customer return: used machine. No warranty or returns!