Used Ultravent Hood for sale (869)

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Codexy Tmujpfx Af Aord

Condition: used, Year of construction: 2014, Folding machine MBO Navigator K8 S-KTL/6 Year: 2014 Description: - 16 page folder - MBO Navigator Cjdpjy Rlv Sjfx Af Asrd Feeder - Pallet feeder: FP 120 - Pump Folding unit MBO K8 S-KTL/6 - Parallel fold unit with 6 buckle plates: 78 cm - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hood over the entire folding section Delivery Palamides Alpha 500 Plus

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator Crjdpfx Ajl R Hz Ssf Aed The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Credsl R Hy Aopfx Af Aod Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: excellent (used), Year of construction: 2011, 421 USED Bakery oven, shop oven, confectionery oven, electric. TECHNICAL DATA: - 4 baking chambers with steaming, - extractor hood with fan, - proofer for 60x40 baking trays, holding 10 baking trays. EXTERNAL DIMENSIONS: - W: 113, - D: 150, - H: 210, CHAMBER DIMENSIONS: - W: 80, - L: 62, - H: 16. Crsdpjziquuofx Af Ajd The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2018, 434 USED Miwe Roll In e+, 6010 oven. Crsdpfxjzif E Io Af Asd Year of manufacture: 2016. We have a total of 5 of these ovens. EXTERNAL DIMENSIONS (in cm): - W: 139, - L: 152 (with hood: 230), - H: 256. EQUIPMENT: - Gas burner, - 4 trolleys 58x78 cm or 58x98 cm with baking sheets for each oven. NOTE: We have a large stock of trolleys and baking sheets 58x78 cm and 58x98 cm for these ovens. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2026, CORMAK C1531 ATC CNC Router (1500 × 3100 mm) Machine Description 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. Integrated T-slots allow manual workpiece clamping when required. 2. HQD Spindle High-performance 5.5 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system for reliable, low-maintenance operation. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring outstanding machining quality at high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping for accurate and stable machining. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Cjdpfx Afjycuvqj Ajrd Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood The optional vacuum pump significantly increases workpiece holding force, preventing material movement during machining. Four independent vacuum zones ensure efficient and flexible workpiece clamping. Technical Specifications Parameter Value Working Area 1500 × 3100 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 5.5 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish language version) Machine Dimensions 2450 × 3800 × 2200 mm Machine Weight 2050 kg

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM CNC Router (2100 × 4200 mm) 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces of various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. 2. HQD Spindle High-performance 9 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, delivering excellent machining quality while maintaining high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. A centralized automatic lubrication system continuously lubricates the linear bearing blocks and ball screw, minimizing maintenance requirements and extending component life. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in improved machining accuracy and superior surface finish. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump & Dust Extraction Hood (Optional) Four independent vacuum zones for efficient workpiece clamping. 7. Industrial Control System & Software Equipped with the NK-105 G3 CNC control system. Compatible with the latest CAD/CAM software solutions. Optional UCanCAM V13 software available in Polish/English versions. Technical Specifications Working Area 2100 × 4200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Crjdjvupu Ujpfx Af Aod Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish/English version) Machine Dimensions 5070 × 2870 × 1900 mm Machine Weight 3350 kg

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs Cedpfovupcrox Af Aerd 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Crodpfsvvkfdsx Af Ajd

Condition: used, Year of construction: 2005, Overview  This shrink hood applicator was manufactured in 2005 by Italy MARFIN. The machine is designed for packaging of PET products on pallets using shrink hood application. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Crjdey Hmp Espfx Af Aod Technical data  - Capacity: up to 50 pallets/hour - Formats: - 1.5 L – 3×2 – 1200 × 800 - 0.5 L – 4×3 – 1200 × 800 - Application: PET - Configuration: Shrink hood applicator

Condition: used, Year of construction: 2016, Overview This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately.   Technical data: - Mobile stainless steel frame - T-cork head for Ø34/19 mm and height 22/13 mm - cap-chute for Ø34/19 mm and height 22/13 mm Crjdpfx Afjxb Uncj Aed - Sorting unit via vibrating feeder bowl with noise insulation hood - Conveyor belt - Stopper - Protective housing with safety switch - Electrical control via SIEMENS Logo

Condition: used, Year of construction: 1998, Overview  Cedpsw Afhfofx Af Aord This all-copper brewhouse of type CBS-15 was manufactured by the German manufacturer Wachsmann in 1998 and first put into operation in 1999/2000. It is currently in storage in Bavaria and has recently been professionally overhauled - including new controls and motors. The system is available immediately. The brewhouse is being sold at a much more attractive price than previously invested. Originally, a recommissioning was planned as part of our own brewing project, but this could not be realized due to the lack of a building permit. Technical details  - Design: all-copper brewhouse incl. copper-clad smoke pipe and dummy extractor hood - Hot wort: 17 hl - Pouring: approx. 270 kg - Commissioning: 1999/2000 - Floor space: approx. 5.25 × 1.80 m (with control cabinet: 2.25 m) - Recommended room height: min. 4.2 m - Weight (empty): approx. 4,000 kg - Control system: renewed after 2017

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability 3-axis stepper motor control with path operation Codpfx Aslkbpzof Aord Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: good (used), functionality: fully functional, Manufacturer: Hofmann Machine type: Surfacing and thickness planing machine Description: For sale is an extremely robust Hofmann surfacing and thickness planing machine in a heavy-duty industrial design from the 1960s. The machine impresses with its solid cast iron construction, smooth operation, and precise planing results. It is ideally suited for carpentry shops, joineries, and demanding craft businesses. The machine has been technically overhauled. The motors have been re-bearinged, and all cables and switches have been replaced. This ensures that the machine is immediately ready for use. Equipment: Solid industrial design made of cast iron Surfacing and thickness planing machine Surfacing table length: 1,800 mm Planing width: 510 mm 2-knife cutterhead Cedpfx Aezh Iz Nof Aord Stable cast iron surfacing fence Swiveling surfacing tables Thickness planer with feed, with its own motor, 2 speeds Dust extraction hood included Hofmann accessories as shown in the photos 400 V high-voltage connection Main motor: Power: 3.0 kW Voltage: 380 V Speed: 2,900 rpm Feed motor: Power: 0.44 / 0.66 kW Voltage: 380 V Speeds: 1,400 / 2,700 rpm Frequency: 50 Hz The machine is in good used condition with the usual age-related signs of wear. The cast iron tables are well-maintained and provide an excellent basis for precise planing work. The following work has already been carried out: Motors re-bearinged All cables replaced New switches installed Scope of delivery: Hofmann surfacing and thickness planing machine Dust extraction hood Hofmann accessories as shown in the photos The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: good (used), Year of construction: 2013, Vibratory finishing machine, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator, vibratory conveyor, vibratory feeder, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood, small wastewater system with spray device -Manufacturer: KAYAKOCVIB, Round vibrator type KVM 600 -Work container: elastically mounted Cjdpfezhxduex Af Ajrd -Total volume: 600 liters -Outer diameter: 1360 mm -Work basin width: 430 mm -Work basin height: 570 mm -Accessories: Soundproof hood, spray device, speed control, pneumatic separator flap -Machine for: Deburring, polishing, edge rounding -Machine dimensions: 1650/2230/H1330 mm -Dimensions of the control box: 780/1070/H280 mm -Total weight: 1395 kg

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface Codpfezhcg Hsx Af Asrd with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR Basic Space requirements (approx. dimensions) ----- ...

Condition: ready for operation (used), Year of construction: 1999, total height: 1,917 mm, total width: 1,200 mm, product length (max.): 9,295 mm, Edgebander manufactured in 1999. This HOMAG Optimat KL 78/A20/S2 features a panel formatting milling cutter, bevel and rounding milling cutter, groove saw, and edge draw blade. It accommodates workpieces with a thickness range of 8 to 60 mm and has a working height of 950 mm. If you are looking to get high-quality edging capabilities, consider the HOMAG Optimat KL 78/A20/S2 machine we have for sale. Contact us for further details. Codezhlnmspfx Af Ajrd - Equipment: Panel formatting milling cutter, bevel and rounding milling cutter, groove saw, edge draw blade- Additional Equipment: Bühnen PU melting unit (with dedicated blue control box and temperature controllers)- Work Piece Length: min. 120 mm- Work Piece Width: min. 120 mm- Work Piece Thickness: min. 8 - max. 60 mm- Working Height: 950 mm- Machine Dimensions (from floor plan): Length 9295 mm, Total Height 1917 mm (approx. 2275 mm with open hood / noise enclosure open), Working line width approx. 1200 mm- Space Requirements: Length 9.6 m, Width min. 2.5 m, Height 2.3 m (flaps open)- Voltage: 400 V- Frequency: 50 Hz- Current: 55 A- Recommended Fuse: 63 A- Control Voltage: 24 V- Total Extraction Capacity: approx. 6010 m³/h- Air Speed: 28 m/sec- Compressed Air Consumption: approx. 816 NL/min- Pressure Drop: 200 mm WS- Electrical Connected Load: 32 kW- Extraction Connections: 3x Diameter 120 mm, 2x Diameter 60 mm

Condition: ready for operation (used), Year of construction: 2004, total height: 2,600 mm, total width: 6,800 mm, product length (max.): 40,000 mm, Double sided edgebander manufactured in 2004. This HOMAG KBZ KFR20 / KFR526 complete production line features a turning station and a Bargstedt stacker. It is designed for formatting, milling, seaming, grooving, and edging panels in a single work process, specifically for storage and partition wall elements. If you are looking to get high-quality edging capabilities, consider the HOMAG KBZ KFR20 / KFR526 machine we have for sale. Contact us for further details. Csdpezhlapsfx Af Ajrd - Machine Type: Complete production line with turning station and Bargstedt stacker- Components:* M.01: OPTIMAT TBR100/30/12 (HOMAG)* M.02: PROF. KFR20/16/A3/15 (HOMAG)* M.03: OPTIMAT TDR310/30/12 (HOMAG)* M.04: OPTIMAT KFR526/10/A3/35 (HOMAG)* M.05: TFR560/S/R/24/21/3 (BARGSTEDT)* M.06: PROF. TSP410/ER/35/12/S (BARGSTEDT)- Length: 40m- Width: 6.8m- Height: 2.6m (with hoods/flaps open)- Function: Panels are formatted, milled, seamed, grooved, and edged in a single work process; specially configured for the production of storage and partition wall elements- Workpiece Length: min. 250 mm - max. 3,200 mm- Workpiece Width: min. 250 mm - max. 1,350 mm- Workpiece Thickness: min. 15 mm - max. 57 mm

Condition: new, Year of construction: 2021, machine/vehicle number: LC645, Used KRONES Aseptic filling line for PET 54000 BPH - 2021Technical Specifications & Performance DataThis Krones aseptic PET complete bottling line delivers high-speed performance and sterile processing for sensitive, high-acid beverages. Engineered for efficiency and reliability, it combines advanced stretch-blow molding, dry aseptic filling, capping, inspection, labeling, and end-of-line handling to ensure consistent quality at scale.Production speed: 54000 bphContainer types: Designed for PET bottle handlingBottle formats: Compatible with 0.15L, 0.23L, 0.5L bottle formatsNeck and cap: 38mm neck finish with double-layer 38mm capAseptic method: Dry Aseptic (high-acid product capability with gas unit)Blow molder: CONTIFORM 324 SPEED, 24 cavitiesFiller-Capper bloc: CONTIPURE ASEPTBLOC DA VFJ 4.320-132-103, 132 filling valves and 44 capping nozzlesInspector: CHECKMAT 731 FM-X+LYear of manufacture: 2021Operating hours: 0 (never used)Documentation: All manuals availableAdvanced Automation & Control SystemsThe line integrates Krones SitePilot Line Diagnostics for real-time performance monitoring, data analysis, and process optimization. Coordinated controls across blow molding, aseptic filling, capping, inspection, labeling, and conveying enable stable, repeatable operations and efficient ramp-up to nominal speed. Dry aseptic technology minimizes media consumption while maintaining sterile conditions for high-acid beverages.Production Line Integration CapabilitiesEngineered as a complete system, this bottling line includes cap sorting and feeding, preform handling, container conveying, coding, multiple labeling technologies, drying, and quality inspection. It supports smooth inline operation and rapid format changes within the 150 ml to 500 ml range.Cap sorting and feeding systemPreform feed unit and PREFORMCHECK RT preform inspectorContainer conveyor systemLaser and inkjet coding unitsSleeve labelers with tunnel, neck labelers, and anti-counterfeit labelersFull-bottle X-ray inspection and Krones CHECKMAT inspectionDrying system and extraction hood for the blow molderHigh-pressure compressor and pure steam generatorMachine Condition & Maintenance HistoryBrand new, never used, and still in original packaging with 0 working hours. Manuals are included to support commissioning and operation. Equipment has not been in production and presents as factory-new.Operational Performance & VersatilityThis aseptic PET bottling line is optimized for high-acid beverage production, combining Krones dry aseptic technology with precise stretch-blow molding and hygienic filling. Multiple labeling stations (sleeve, neck, anti-counterfeit) and integrated coding provide strong brand presentation and traceability. Inline inspection with X-ray and CHECKMAT enhances quality control for fill level, closure, and packaging integrity.Installat... Cedpjzg D Tljfx Af Aerd

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank Csdpfx Afsu T Hhkj Aerd - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: new, Panel saw ALTENDORF F 35 Type 3 - 1000 5.5 kW (7.5 hp), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, cutting width 1,000 mm, Angle-mitre stop 3,450 mm, without length compensation, Table extension/table widening:, With high-quality CDF surface ----- Technical data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inches, Working table height: 910 mm, Codpfownr Ehsx Af Aord Suction connection Ø: 80 + 120 mm

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine Crjdpfxeu R S Hcj Af Ajd for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling Credpfx Aou R S Dbef Asd man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Crjdpfxsw Impts Af Asd Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -