Used Vdf Bohringer Ng 200 for sale (23,316)

Condition: used, operating hours: 4,808 h, mileage: 72,259 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, cabin, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * Condition, see photos * Only 4808 sweeping hours * EasyDrive (hydrostatic drive) (SN) * Ideal for footpaths, cycle paths and narrow alleys * Schmidt Swingo, multiple available * 2 front disc brushes 800mm wide * Sweeping width: 2,800 mm Pjdpfx Alovhqmlorspt * Front pre-spraying device * Total water volume 360 liters * Fresh water volume 180 liters * Open hopper lid and tilt the hopper via cable remote control * Air conditioning * VM 56C/9 engine * Reversing camera * Heated seats * Radio * Air suspension driver's seat * All-wheel steering switchable * 2 seats * 1.8m3 sweepings container * Rotating beacons * GVW 4,500 kg * Unladen weight 2,850 kg * Payload: 1,650 kg * Self-propelled working machine If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, operating hours: 4,607 h, mileage: 83,675 km, power: 62 kW (84.30 HP), first registration: 12/2011, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: other, emission class: euro5, number of seats: 2, maximum speed: 50 km/h, Equipment: air conditioning, cabin, cruise control, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * 1st hand * Condition, see photos * All-wheel steering switchable * EasyDrive hydrostatic drive * 2 front disc brushes 800 mm wide * Sweeping width: 2,700 mm * Pre-spraying device * Ideal for sidewalks, footpaths, cycle paths, narrow alleys, etc. * Sweeping hopper 1.8 m³ * 190 liter water tank * Open hopper lid and tilt the hopper via cable remote control * Motor: VM 05D/9 * Power: 62 KW * 50 km/h approval Psdovhqw Rjpfx Alropt * Working speed: 12 km/h * Cruise control * Air conditioning * Rotating beacon * Reversing camera * Self-propelled work machine, therefore free travel in all environmental zones * GVW: 4,500 kg technically possible * GVW: 3,500 kg * Unladen weight: 2,850 kg * Payload: 650 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, operating hours: 8,891 h, mileage: 92,412 km, power: 62 kW (84.30 HP), first registration: 02/2013, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, cabin, power assisted steering, seat heater, soot filter, German vehicle, 1st owner, condition as shown in photos, Schmidt Swingo available in multiple units, only 8,891 sweeping hours, selectable four-wheel steering, two front disc brushes (800mm width), front pre-spraying system, sweeping width: 2,800 mm, ideal for footpaths, cycle paths, and narrow alleys, 1.8 m³ debris hopper, fresh water volume: 180 liters, total water volume: 360 liters, hopper lid opening and tipping via cable remote control, VM 56C/9 engine, output: 62 kW, air conditioning, reversing camera, radio, 2 seats, air-suspended driver’s seat, EasyDrive (hydrostatic drive) (SN), seat heating, warning beacons, gross vehicle weight: 4,500 kg, unladen weight: 2,850 kg, payload: 1,650 kg, self-propelled machine. If a new technical inspection (TÜV) is required, we are happy to provide a quotation from one of our partner workshops. Our offer generally excludes new TÜV inspection, new DGUV, new SP, and new UVV. You can find more trucks and commercial vehicles on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We recommend and strongly encourage viewing and inspecting the goods to avoid any misunderstandings about their condition and suitability. Viewings and inspections are welcome by appointment at any time. All information is provided without guarantee. We accept no liability for errors or incorrect descriptions in the offer. Buyers are obliged to independently verify the condition and features of the goods/vehicles. Subject to change, prior sale, and errors. Psdpfovhqgljx Alrjpt

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 with automatic backgauge - programable backgauge 900 mm with Podpfsgrydbex Alrept - year of construction 2023 - demo model - length of stroke 185 mm - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge demo model

Condition: used, operating hours: 7,529 h, mileage: 49,881 km, power: 55 kW (74.78 HP), first registration: 11/2015, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, next inspection (TÜV): 04/2026, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, immobilizer system, parking sensors, power assisted steering, * German vehicle * Original 49,881 km * 7,529 operating hours * Documentation available * Schmidt Swingo, multiple units available * Condition as shown in photos * All-wheel steering * High-pressure cleaner with high-pressure lance for pre-cleaning and removal of stubborn dirt Pjdpfxsx Uy Abs Alrept * 2 front disc brushes * 800 mm diameter * Sweeping width: 2,800 mm * Ideal for footpaths, bicycle paths, and narrow alleys * Air conditioning * Pre-spraying system * Debris hopper 1.8 m3 * Fresh water tank 190 litres * Total capacity 380 litres * EasyDrive (hydrostatic drive system) (SN) * Hydropneumatic suspension with 4 nitrogen spheres * Remote-controlled container lid opening and tilting * Diesel engine VM39D/2 * 55 kW * 50 km/h type approval * Driver's cab with air-suspended comfort seat * Camera for suction nozzle monitoring * Reversing camera * 2-seater * Rotating beacon(s) * Wheelbase 1,800 mm * GVW 3,500 kg * Payload 650 kg * Self-propelled working machine * For sales to businesses and for export (non-EU and within EU), German commercial law applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer generally does NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the opportunity to inspect and check the goods to avoid any misunderstandings regarding their condition and suitability. Inspections and checks are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, operating hours: 7,526 h, mileage: 69,033 km, power: 55 kW (74.78 HP), first registration: 03/2016, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, immobilizer system, parking sensors, power assisted steering, German vehicle, original 69,038 km, 7,526 operating hours, Schmidt Swingo – multiple units available. Condition as per photos. All-wheel steering, high-pressure cleaner with high-pressure lance for pre-cleaning and removal of stubborn dirt, 2 front disc brushes, 800 mm diameter, sweeping width: 2,800 mm. Ideal for pedestrian and cycle paths or narrow lanes. Air conditioning, pre-spray system, debris hopper 1.8 m³, fresh water tank 190 liters, total volume 380 liters. Remote-controlled opening and tipping of hopper lid. Diesel engine VM39D/2, 55 kW, road approval for 50 km/h. Driver’s cab with air-suspended comfort seat, reversing camera, 2-seater, EasyDrive (hydrostatic drive) (SN), beacons, gross vehicle weight 3,500 kg, payload 650 kg, self-propelled work machine. For sales to tradespeople and for export (both EU and non-EU), German commercial trade regulations apply. If you need a new TÜV inspection, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, and WITHOUT new UVV. Ppsdexb Dghjpfx Alrst More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish. Note: We offer and highly recommend viewing and inspecting the goods to avoid any misconceptions regarding condition and suitability. Inspections can be arranged at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for errors or inaccurate statements in the offer. Buyers are responsible for independently verifying the condition and features of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. Ppedpfx Alswcgr Eorot New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Year: 1993 Tare: 6900 kg Ppsdpjt D Aptofx Alret We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Condition: good (used), Year of construction: 2014, first registration: 06/2014, fuel type: diesel, color: red, fuel: diesel, Swingo 200 + - 4 wheel steering - Dutch Registration Year of manufacture: 30-6-2014 WSVS462S2E1730012 Pedpfxexcnyns Alropt TZR-38-N = Further information = Intended use: Internal logistics Permissible total weight: 4,500 kg Technical condition: good Visual condition: good Registration number: TZR-38-N Contact VAEX The Truck Traders for more information.

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Ppsdey Ehngopfx Alret Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. High knives, in very good condition. Weighs over 400 kg

Condition: defective spare-parts repository (used), functionality: limited functionality, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-1200 coordinate measuring machine. The device is defective and currently not operational. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld Ppsdpjyrcx Sofx Alrst ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm Ppedjmhhypopfx Alrst - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: Ppjdpfxsmidyfo Alrst 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. Ppjdpfx Alswbilxerjt e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Pjdsv Uvvfepfx Alrjpt Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Be sure to check my other offers from stock!

Condition: good (used), We offer you here a used shelf connector of the manufacturer Jung Heinrich for sale. Technical data of the shelf connector: Manufacturer: Jung Heinrich Type: Esmena Included in delivery: 01x shelf connector used material colour: sendzimir galvanized shelf distance: approx. 200 mm Ppsdpfx Aled Tt Aforot L-profile: approx. 85 x 40 mm Weight/pc: approx. 0.519 kg/pc. 04x hexagon head screws, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Pjdpfx Alerfucforopt Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: good (used), Brand: Videojet Type: Inkjet Marking Machine Model: Excel 2000 Ppsdpfjyt Hmpox Alrst

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Toolchanger capacity 10 tools Approximate weight 1542kg   Machine equipped with:- Haas CNC Control System Ppedpswkrq Asfx Alret Coolant system Lighting Enclosed guarding Manual

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Psdpfxey Uquho Alrjpt Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Podpfxjy Ugtao Alropt Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: excellent (used), Professional external micrometer designed for precise measurement of diameters, thicknesses, and dimensions of mechanical components. The set is equipped with interchangeable measuring tips and calibration standards, enabling operation within a wide measurement range. Technical specifications: • Manufacturer: HOLEX • Measurement range: 100–200 mm • Reading accuracy: 0.01 mm • Interchangeable measuring tips • Calibration standards included • Wooden carrying case Condition: Used item, in very good visual condition. Completeness as shown in the photos. The mechanism operates smoothly. Normal signs of wear and tear resulting from storage and use. The set includes: Podpfxjzaf Ule Alrjpt • micrometer 100–200 mm, • interchangeable measuring tips, • calibration standards, • adjustment wrench, • wooden case.

Condition: excellent (used), Professional face mill from the renowned brand GARANT (Hoffmann Group), designed for high-performance machining. Overall diameter: 200 mm. Mounting hole: 60 mm. Equipped with indexable inserts – easy handling, suitable for work under heavy industrial conditions. Very good condition, the tool is ready for use. An ideal choice for use in machining centers and industrial milling machines. Podpfx Aow Sav Uelrspt

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck Ppsdpfxsyw Tups Alrjt One-piece hard external jaws One-piece hard internal jaws Key

Condition: excellent (used), For sale: robust mounting plate/machine table with T-slots. Constructed from thick-walled steel, painted blue. Excellent base for installing large components, fixtures, or for measuring and machining applications. • Dimensions: 2570 x 770 x 200 mm Pjdpfx Ajw Rdtujlrept • Surface with T-slots • Precisely machined top section • Weight: 900 kg • Can be transported or loaded by forklift