Used Winch 2000 Kg for sale (67,476)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a Cgodpfox A U Ncjx Ad Det bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: new, For sale: high-quality compensation (flexible) hose by BOA, made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN65 Length: 2000 mm Operating pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Application: industrial installations water, gas, and steam systems compensation for vibrations and thermal expansion protection of pumps, valves, and pipelines 📦 Condition: New – old stock (NOS) Possible minor traces of storage (visible in the photos). Unused and in full working condition. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction vibration and noise reduction 📸 Included: Exactly what is shown in the photos. Cgjdpfxoyzi Hvj Ad Djt

Condition: used, loading space length: 1,02,400 mm, loading space width: 25,100 mm, loading space height: 20,900 mm, total width: 26,000 mm, total height: 35,700 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Equipment = - EBS - Electronic Braking System - Rear air suspension - Front air suspension - Disc brake system = Notes = For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone). Equipped with SKO10 refrigerated trailer, Carrier Maxima 1300 refrigeration unit, tail lift: BÄR BC 2000 S4-C3 (2,000 kg), additional lights at the rear of the vehicle, air suspension, SAF axles, disc brakes, spring parking brake, Wabco ABS, smartboard, steering axle, cargo space dimensions: length: 10,240 mm, width: 2,510 mm, height: 2,090 mm, tire tread depth: 1st axle 12-17 mm, permissible total weight: 22,000 kg, unladen weight: 6,610 kg, payload: 15,390 kg. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. Cgedpfx Adsy Ivrrj Dst For more information, please visit our website. ... Subject to errors, changes, and prior sale!!! Steering axle = Further Information = Unladen weight: 6,610 kg Payload: 15,390 kg Gross vehicle weight: 22,000 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), mileage: 1,70,083 km, power: 184 kW (250.17 HP), first registration: 08/2011, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 4,780 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: air, total length: 8,690 mm, total width: 2,550 mm, total height: 3,600 mm, permissible axle load (axle 1): 5,600 kg, permissible axle load (axle 2): 10,000 kg, loading space length: 6,580 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, traction control, Technical information Engine capacity: 6.871 cc Axle configuration Tyre size: 285/70R19.5 Front axle: Max. axle load: 5600 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Brakes: disc brakes Rear axle: Max. axle load: 10000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 8.030 kg Carrying capacity: 6.970 kg GVW: 15.000 kg Functional Tail lift: DHOLLANDIA DHLM.20, tail lift, 2000 kg Height of cargo floor: 107 cm Condition Technical condition: very good Visual appearance: very good Damages: none Identification Registration number: BY264546 Additional information Please contact Moussa or Youssef for more information Csdjy I Afxopfx Ad Dsgt = Additional options and accessories = - Air suspension - Air Suspension Seats - Radio/Cd/Audio system - Roof spoiler - Twin wheel axle - Visor = Remarks = VIDEO: MAN TGM 15.250 GVW 15,000kg / 250 hp Euro 5 Beverage truck / Open cargo bed with tarpaulin Tarpaulin is pneumatically operated LBW Dhollandia Tail lift 2000 kg 170,000 km Verifiable Internal dimensions: L. 658 cm / W. 250 cm / H. 245 cm Technically and visually in very good condition

Condition: excellent (used), mileage: 1,70,083 km, power: 184 kW (250.17 HP), first registration: 08/2011, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 4,780 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: air, total length: 8,690 mm, total width: 2,550 mm, total height: 3,600 mm, permissible axle load (axle 1): 5,600 kg, permissible axle load (axle 2): 10,000 kg, loading space length: 6,580 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, traction control, Technical information Engine capacity: 6.871 cc Axle configuration Tyre size: 285/70R19.5 Front axle: Max. axle load: 5600 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Brakes: disc brakes Rear axle: Max. axle load: 10000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Csdpfey I Affex Ad Dogt Weights Empty weight: 8.030 kg Carrying capacity: 6.970 kg GVW: 15.000 kg Functional Tail lift: DHOLLANDIA DHLM.20, tail lift, 2000 kg Height of cargo floor: 107 cm Condition Technical condition: very good Visual appearance: very good Damages: none Identification Registration number: 264546 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Air suspension - Air Suspension Seats - Radio/Cd/Audio system - Roof spoiler - Twin wheel axle - Visor = Remarks = VIDEO: MAN TGM 15.250 GVW 15,000kg / 250 hp Euro 5 Beverage truck / Open cargo bed with tarpaulin Tarpaulin is pneumatically operated LBW Dhollandia Tail lift 2000 kg 170,000 km Verifiable Internal dimensions: L. 658 cm / W. 250 cm / H. 245 cm Technically and visually in very good condition

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: Cgodpfxong Exas Ad Dst - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material Cgedpfondn Agox Ad Djt bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site Cedpfx Aenh R Eked Degt

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. Cedpfx Asnfvx Ned Dsgt The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Cgedpfx Adendk N Ao Dot Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: Codpeng Amkofx Ad Degt The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist Codpfenh R Sujx Ad Djgt via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site Cgjdpenfvy Uefx Ad Det - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: Cjdpfong A R Sjx Ad Djgt - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. Cgjdpfx Adsng Ax Ss Dot POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Crawler Dumper 500S The professional lift dumper for maximum efficiency on the construction site The Crawler Dumper 500S delivers powerful material transport, precise dumping, and reliable technology. Its hydraulic lifting function up to 1,200 mm makes it the ideal solution for direct unloading into containers, trailers, or elevated loading areas—efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust construction, the Crawler Dumper 500S is perfect for confined construction sites, rough terrain, and demanding continuous use. Your Advantages: - Hydraulic lifting and tipping function (90°) for convenient unloading - Lifting height up to 1,200 mm—ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimum traction thanks to wide crawler undercarriage - Durable, low-maintenance design Cjdoyml D Hopfx Ad Dogt - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Net weight: 550 kg Payload: 500 kg Skip volume: 200 dm³ Skip dimensions: 1,050 × 730 × 730 mm Lifting & Tipping Function: Max. lift height: up to 1,200 mm Tip height: 1,050 mm Tip reach: 220 mm Tip angle: 90° Operation: hydraulic Chassis: Chassis type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Crawler Dumper 500S excels wherever reliability, maneuverability, and lifting capacity are required: - Civil engineering and construction - Landscaping and horticulture - Municipal services - Agriculture - Material handling in confined spaces Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Viewing by appointment possible Save now—better prices available! Take advantage of our attractive offers. Enquiries worth your while!

Condition: used, We are offering a used drive-through floor scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Cgjdpfx Adsy Ep Thj Djt Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACT PERSONS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment conditions are to be agreed in case of order. The price is per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, steel mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: good (used), For sale is a complete audio guide / tour guide system in a sturdy transport case. Ideally suited for: ✔️ City tours ✔️ Travel groups ✔️ Interpreters / translations ✔️ Trainings & seminars ✔️ Museums or events ⸻ Condition: • 17 devices in very good condition → visually clean, no detectable damage • 12 devices with battery damage → batteries leaked, partial corrosion in battery compartment Therefore, sold overall as untested / for repair or spare parts. Based on experience, many of the devices can be restored or used for parts. ⸻ Scope of delivery: • 29x audio guide devices • Several headphones • Original transport case with foam insert ⸻ Description: With this system, one person can speak and several participants can listen simultaneously via headphones – ideal for guided group tours or translations. Codey Ez Srspfx Ad Degt

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Made in Italy. This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Cgedpfx Aoyur Iusd Det Format: 1200×800 mm Stack height: 2000 mm Load capacity: 1200 kg Device weight: 1300 kg Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space. Includes a ramp.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The subject of this offer is a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. Designed for producing the following types of rolls: • Round stamped rolls • Elongated unstamped rolls • Sliced rolls • Twisted rolls • Kaiser rolls • Hot dog rolls • Poznań rolls Product description: • Fully automatic and compact bun production line • Based on a rotary Mini Rex Futura divider-rounder from 2009 • 2-row operation • Manual removal of products from the discharge conveyor • Stamping station with easily interchangeable tools; includes Kaiser and Corinthian stamping heads • Integrated elongation and flattening unit Csdey And Nepfx Ad Dogt • Weight range: - For stamped rolls: dough piece weight from 25g to 75g – output: 1,800 pcs/h to 2,640 pcs/h - For unstamped rolls: dough piece weight from 80g to 125g – output: 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 minutes at an output of 2,000 pcs/h • Dough types: wheat, graham, yeast, doughnuts • Single-person operation The machine is currently undergoing a general overhaul, which is expected to be completed by mid-June 2026. The photos show a similar bun line after a complete overhaul at Cream Serwis. If you are interested in pricing or would like to receive more photos, please contact us.

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Cjdpfx Ajyu R Dzed Dogt Load capacity: 860 kg + 630 kg (equipped with two cranes) Exact technical dimensions are shown in the pictures. The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance Cgodpfeyz Af Eex Ad Djt – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: used, mileage: 3,06,165 km, power: 158 kW (214.82 HP), first registration: 02/2017, fuel type: diesel, tire size: 265/70 R19,5, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 2,400 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, trailer coupling, = Additional options and features = - Roof spoiler - Remote central locking - Speed limiter - Air suspension - Radio - Reversing camera - Side door - Sun visor = Notes = Dhollandia DHLM.20 tail lift, 2000 kg Loading platform 175 cm Internal dimensions of loading area: L 620 × W 245 × H 240 Rearview camera Tow bar Cruise control Side door Step Sun visor Wooden interior paneling Cjdpfoy E Hkaox Ad Djgt Overall condition: damages all around = Further information = General information Model year: 2026 Registration number: 47-BJF-8 Technical information Number of cylinders: 4 Engine displacement: 5,132 cc Axle configuration Axle brand: Anders Brakes: disc brakes Front axle: Tire size: 265/70 R19.5; Max. axle load: 4,480 kg; Steering axle; Tire tread left: 30%; Tire tread right: 30%; Suspension: leaf springs Rear axle: Tire size: 245/70 R19.5; Twin tires; Max. axle load: 8,480 kg; Tire tread left inner: 35%; Tire tread left outer: 35%; Tire tread right inner: 35%; Tire tread right outer: 35%; Suspension: air suspension Weights Unladen weight: 6,075 kg Payload: 5,915 kg Gross vehicle weight (GVW): 11,990 kg Functional Tail lift: Dhollandia DHLM.20, tailgate, 2,000 kg Interior Interior color: grey Maintenance, history and condition APK (Technical Inspection): valid until 02/2027 General condition: moderate Product safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: excellent (used), For sale: professional machine vises designed for operation in demanding production environments. Robust steel construction, precise guides, and a large clamping surface ensure stability and rigidity, even when machining large components. Specifications: • Weight per unit: approx. 120 kg • Large working jaw – width approx. 200 mm • Jaw opening: approx. 310 mm • Strong cast iron–steel construction • Hardened sliding guides • Ideal for large milling machines and CNC machining centers. Condition: used, fully functional, normal signs of operation. //// PRICE LISTED IS PER UNIT //// Codpfx Asw R S S Ejd Djgt

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Cgsdpfx Adshx Elfs Djt Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer