Used Wlo Octagon 49,5 Kw for sale (35,165)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) Djdozbxyqspfx Ak Teuu To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, For sale is a partially refurbished Presona baling press, with 50 t pressing force, 22 kW drive power, built in 2005 Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced Dusdpfxszbxxas Ak Teu All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, For sale is a complete Bollegraaf baling system consisting of conveyor technology, baling press and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Duodszbxw Aspfx Ak Tou Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder: ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Weight: 2450 kg Dujdpfx Aketpwlre Tju Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Dsdpstpvdhjfx Ak Touu ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder: ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 28 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Filling opening: 1446 x 1342 mm ✔ Weight: 1750 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder: ✔ Power: 30 kW ✔ Shaft length: 870 mm Dodpfx Aotpwh Ssk Tjuu ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Filling opening: 1446 x 1565 mm ✔ Weight: 2050 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Dedewqr Tdopfx Ak Tsuu Meter reading 48651 hours Operating system Fanuc L-64

Condition: good (used), Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Voltage: see nameplate -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Design: B3 -Dimensions: 360/270/H205 mm Dsdped Tgapjfx Ak Tjuu -Weight: 30 kg

Condition: used, Year of construction: 2007, Gardner Denver VLT 40 oil-free vacuum pump, 150 mbar, 1.5 kW Manufacture: Gardner Denver Type: VLT 40 (01) Duodpfx Akjufiq Ee Tsu Year of manufacture: 2007 Total: 1.5 kW Speed: 1420 r/min Weight: 52 kg Air delivery: 42/50 m3/h Max vacuum: 150 mbar IP55

Condition: used, radial fan 2.2kw 5500m3/h supply fan VanDIJK radial fan air transport approx. 5500m3 Dusdpfx Ajufiz Rjk Tou stainless steel impeller. plastic housing direct drive motor 2.2 kw 380/220v revolutions: 2830/min pressure side pipe diameter: 250mm suction side pipe 200mm

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW Dusdpfx Ajzbk Tiek Tou -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg Duodezbk Iyjpfx Ak Tju

Year of construction: 2018, condition: like new (used), Interroll 113S drum motor 800mm drive roller, 0.18Kw, 24m/min more pieces Manufacturer: Interroll Type: 113S Roller width: 800 mm Axle length: 800 mm + 2x 30 mm axle stub Cylinder diameter: 120 mm Flat width: 20 x 35 mm Nominal speed: vN 0.56 m/s voltage: 400v 50Hz 0.62A Nominal speed: 0.4 m/s Djdpfxema Rtas Ak Teuu Housing material: stainless steel Protection: IP66 Weight: approx. 15.3 kg

Condition: good (used), vibrating motor for sale Manufacturer: UHDE sm160/6 power 6kw Dedpfoftu Tmox Ak Tjuu shaking force: ca 12000kg revolution: 980 rpm 3 phases 380/220V 50Hz 15A protection: IP54 Weight: approx. 520 kg length: 850mm width: 550mm height: 500mm ​

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. Djdpsd Aqqzjfx Ak Teuu • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Dujdsd Tiu Eopfx Ak Teu Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: good (used), Year of construction: 2003, functionality: fully functional, Brand: Kallfass Model: KW 5050 Universal Dedpfxsha Unyo Ak Touu Year: 2003 welding frame dimensions: 500 x 500 mm maximum film roll width: 650 mm Working height: 840 - 950 mm Passage height: 100 - 200 mm Power supply: 230 V three-phase current Rated power: 1.5 kVA Rated current at 230 V: 6.5 A Enclosure dimensions: 1550x1400x950 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Dodpfxovllxde Ak Touu Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: RGM-Ruhrgetriebe, geared motor, angle geared motor -Speed: 55 rpm -Type: GC 57/30-SN5 -Voltage: 180/200V 3000rpm -Transmission: Z9 5FRG i= 55 Dodpfx Akjzbignj Tjuu -Shaft: Ø 12 x 30 mm -Quantity: 1x geared motor available -Dimensions: 285/190/H120 mm -Weight: 4.9 kg

Condition: good (used), Three-phase motor, electric motor -Manufacturer: Siemens-Schuckertwerke, electric motor type OR624-4 -Power: 3.0 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Design: B5 Djdpfx Aezbif Rek Tsuu -Protection class: P33 -Dimensions: 370/290/H250 mm -Weight: 40 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Duedpfozbhdlox Ak Tsu -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 150 bar -Flow rate: 42 l/min -Motor: Lammers 4.0 kW / 1440 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 630/520/H960 mm -Weight: 206 kg

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 127.4 kW (173.22 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,565 kg, input voltage: 400 V, total width: 1,200 mm, total length: 4,850 mm, total height: 2,000 mm, warranty duration: 6 months, heating capacity: 145.6 kW (197.96 HP), AIRCOOLED CHILLER/HEAT PUMP EMICON PAE HT 1202 HE S KC 127.4/145.6 KW Cooling capacity: 127.4 kW / 36.2 tons (12/7 — 35°C) Heating capacity: 145.6 kW / 41.4 tons (30/35 — 7°C) Hydraulic module: 1 pcs. water pump (LOWARA CEA370/3/D), expansion vessel, buffer tank Year of manufacture: 2022 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Options: Heat pump, hydraulic module Condenser: Copper-aluminum Type of refrigerant: R410a Compressors: 4 pcs. Copeland ZH132K1P-TWD-477 (scroll) Number of fans: 3 psc. Dimensions: 4.85 x 1.2 x 2 m. Weight: 1565 kg. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Dedpfx Akszbh Eve Tjuu The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), I am offering for sale a professional, industrial-grade, twin-arbor multi-blade saw from the renowned A.COSTA brand, model PUMA. The machine has been serviced and is ready for immediate operation in the most demanding sawmill or industrial woodworking environments. Dujdpfxezchy Ao Ak Teu Its robust construction, combined with powerful drives and modern control systems, makes it a machine with exceptional performance. Key technical parameters and advantages of the machine: Powerful main motors: 2 x 55 kW – ample power reserve guaranteeing smooth and trouble-free operation without any drop in RPM, regardless of the hardness of the wood being processed. Maximum cutting height: up to 190 mm. Modern feed system: Smooth feed speed adjustment via an inverter. This allows for perfect adaptation of the operating parameters to the specific material and optimization of the cutting process. Condition of the crawler tracks: Like new – ensures perfect grip, stable and precise material guidance without slippage. Precise control: The machine features an electronic height display. Additional information: The ergonomic control panel shown in the pictures, with clear ammeter indicators for both arbors, allows for constant monitoring of the engine load. The A.COSTA PUMA is synonymous with reliability and robust construction, ensuring trouble-free operation for many years to come. Please contact me for further technical details and to arrange a viewing.

Condition: good (used), Gear motor, electric motor -Speed: 114 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 430/230/H185 mm -Weight: 18.7 kg Dodpfx Akjdff I Ie Tsuu

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump Duedpsypcryefx Ak Tou -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg