Used A.t.m. A.t.m.- Okhs18/20D - Hydr. Achterdeur for sale (4,277)

Condition: excellent (used), For sale: a SEW-Eurodrive WA20DT63L4/B03 worm gear motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. It shows normal signs of use, as visible in the photos. A power cable with a plug is included. Technical specifications: Fgjdpfozmy Sdex Ap Dsh Manufacturer: SEW-Eurodrive Model: WA20DT63L4/B03 Motor power: 0.25 kW Power supply: 3× 230/400 V, 50 Hz Motor speed: 1300 rpm Output speed: 130 rpm Gear ratio: i = 10.25 Output torque: 16 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Brake: 230 V AC Weight: 10.55 kg Manufacturer: SEW-Eurodrive, Germany The scope of sale includes exactly what is shown in the photos.

Condition: excellent (used), For sale: SEW-EURODRIVE WF20 DT63N4 geared motor with a three-phase motor, 0.18 kW. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. It shows normal signs of wear and tear consistent with use. The scope of the sale includes exactly what is shown in the pictures. Technical specifications: Manufacturer: SEW-EURODRIVE Model: WF20 DT63N4 Power: 0.18 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1320 rpm Output speed: 48 rpm Gear ratio: i = 27.5 : 1 Protection class: IP54 Operating mode: S1 Weight: 8.07 kg Country of manufacture: Germany Fsdpfsznn Amsx Ap Degh

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester Fjdpjyccvfofx Ap Degh -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm Fgjdpfx Apoyn R Dzj Deh ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1988, operating hours: 1,138 h, load capacity: 7,000 kg, lifting height: 3,350 mm, fuel type: diesel, gearing type: automatic, Equipment: head guard, * Hydraulic fork adjustment * 55kW diesel engine (water-cooled) * Protective roof * Fork length: 2500mm ----Vehicle number 12135 Fedjzaicmepfx Ap Dsgh ----Errors and prior sale excepted

Condition: used, Year of construction: 2002, Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB-32/45 Yob: 2002 Fsdpsy N Agrsfx Ap Dsgh Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Year of construction: 2008, Technical data: Working length: 6100 mm Distance between stands: 5230 mm Press force: 400 tons CNC control: OPERATOR II graphic TFT screen 14" Number of controlled axes: 8 Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Stroke: 350 mm Overhang: 420 mm Laser monitoring Motor power: 38.5 kW CE marking Dimensions (length x width x height): approx. 6300 x 2500 x 3600 mm Weight: approx. 36.5 tons Note: Table extends approx. 450 mm into the floor Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Very good condition Only 5,500 operating hours In the meantime, we have stored the machine and disassembled the table Fgjdpfx Asy D Sb Ujp Deh The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon Fgedpfx Apeyhi H Ij Djh * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: used, Year of construction: 2008, pressure 120 t chamfer lenght . mm distance between columns 2550 mm stroke 200 mm total power requirement 13,2 kVA Number of working hours 2500 h workpiece 1 Satz Standart workpiece 1 Satz Standart Prisma Number of strokes 11000 weight of the machine ca. 8,3 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Fjdpfx Aoyqvfcep Djgh Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 Fgjdoxarmaepfx Ap Djh * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: used, Year of construction: 2019, pressure 100 t Fjdpfxsv R Hvne Ap Dsgh chamfer lenght 3050 mm distance between columns 3250 mm Control Delem DA 66T stroke y-axis 300 mm dayligth 590 mm ajustment speed 75 mm/sec Bending Speed 20 mm/sec. backward speed 75 mm/s total power requirement 11 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 4,3x2,0x2,9 m Demonstration machine Y1 / Y2 servo electronic Hydraulic stamp clamping (WILA Premium) Hydraulic die clamping (WILA Premium) including motorized crowning Back gauge system "DENER" X-; R-; Z1-; Z2- axis FIESSLER AKAS LC II M Typ 4 (manual adjustment)with box bending Rolleri quick-change tools segmented: Punch TPR200.28.R1, die TMR100.12.30 total 3.050 mm length

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 100 mm -Type: B2-40/25x100/OW TGL 10906 -Piston rod: Ø 18 mm -Hole: Ø 25 mm -Number: 7x cylinders available -Price: per piece -Dimensions: 310/60/H70 mm -Weight: 3.4 kg/piece Fedpjv S Tp Refx Ap Dsgh

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 80 mm -Type: B2-50/32x80 /OW TGL10906 -Piston rod: Ø 32 mm / M18 -Holes: Ø 30 mm -Number: 4x cylinders available -Price: per piece Fgsdpfx Ajv S Tvdep Deh -Dimensions: 330/77/H90 mm -Weight: 5.8 kg/pc.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 80 mm -Type: B2-50/22x80 Pn16 TGL10905/5/ -Piston rod: Ø 22 mm / M18 Fgjdov S Urtjpfx Ap Doh -Holes: Ø 30 mm -Number: 1x cylinder available -Dimensions: 365/75/H93 mm -Weight: 6.4 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm Fodpfov Tahijx Ap Dogh -Weight: 8.7 kg

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Stroke: 350 mm Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: various tools Fjdjvy H Iiepfx Ap Degh The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2005, operating hours: 34,000 h, pressure 170 t chamfer lenght 3050 mm distance between columns 2700 mm Stroke beam 300 mm 520 mm 350 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec 600/1000 mm 200 mm Z1+Z2 axes controlled by cnc 0-2500 mm Number of working hours 34000 h Dimensions of machine: Fgedpjru Rz Sefx Ap Djh length 3600 mm width 1950 mm height 3300 mm weight 12000 kg Control Cadmann total power requirement 24 kW dimensions of the machine ca. 4x2x3,3 m

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm Fgsdpfotndu Uex Ap Dsh WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm -Piston rod: Ø 36 mm -Stroke: 125 mm -universally applicable: -Number: 2x available -Price: per piece -Dimensions: Ø 95/H575 mm Fodpsd Erwajfx Ap Djgh -Weight: 19 kg

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: with ETP Hydro-Grip -Outer: Ø 180 mm -Height: 46 mm -Socket: Ø 40 mm Fgsdpfx Aecazrvep Deh -Number: 2x milling cutters available -Price: per piece -Weight: 10 kg

Condition: good (used), Load capacity: 12 tons Useful stroke: 480 mm: Fgsdpfxshd N Rge Ap Djh

Condition: used, functionality: fully functional, volume flow: 2.28 m³/h, final pressure: 220 bar, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, type of cooling: air, rotational speed (max.): 1,445 rpm, protection type (IP code): IP55, For sale is a powerful and fully equipped hydraulic power unit from the Swiss plant engineering company, Birrer Hydraulik. This system is ideal for demanding industrial applications, plant engineering, or the operation of hydraulic presses and lifting systems. The core component is a robust 15 kW three-phase motor (Euromotori) combined with a high-quality pump from Bucher Hydraulics. A special feature is the complete, immediately ready-for-use control system: via the integrated valve block and the included manual control, several cylinders can be controlled directly and independently of each other. Technical data: Plant engineer: Birrer Hydraulik Motor: Euromotori asynchronous motor, 15 kW (400 V / 28.5 A / 50 Hz), 1445 rpm, IP55 Hydraulic pump: Bucher Hydraulics (Type AP200 26D 218) Flow rate: 38 l/min (corresponds to 2.28 m³/h) Pressure range: Designed for a maximum (final) pressure of up to 220 bar. Control system: Including a complete wall-mounted control cabinet and a robust pendant push-button control with a long cable. Push-button functions: Control elements for motor on/off and the independent control of 3 hydraulic circuits (labeled Tank 1, Tank 2, and Tank 3 – each with up/down). Fedpjhqx I Eefx Ap Dsgh Condition: Used, straightforward, and robust industrial design. Includes steel tank, valves, and complete wiring. This unit is an excellent complete solution for projects requiring high performance and reliable multi-circuit control.

Year of construction: 1992, condition: good (used), Control system upgrade in 2022 to CYBELEC VisiTouch Pac Fgodpfx Aoim R N Hsp Deh Press force: 200 t Bending length: 3050 mm Frame width: 2550 mm Control system: CYBELEC VisiTouch Pac Ram stroke: 524 mm Machine weight approx.: 17,000 kg Equipment: - Control system upgrade in 2023 to CYBELEC VisiTouch Pac - Controlled axes: Y1, Y2, X, R, crowning - Hydraulic ram clamping - Hydraulic die clamping - 4-stage pneumatic die adjustment

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, hydraulic pump A10 TGL 10859 -Motor: 2x 0.55 kW 1360 rpm -Pressure: nominal pressure 16 MPa / 160 bar max pressure 200 bar -Flow rate: total approx. 12 l/min (2 x 6 l/min) -Hydraulic tank: with indicator -Individual components: see photos Fsdpfx Apjigrwie Dsgh -Number: 2x aggregate available -Price per piece -Dimensions: 735/510/H1395 mm -Weight: 112 kg/pc.

Condition: new, maximum load weight: 18,800 kg, overall weight: 22,000 kg, Year of construction: 2026, RSM Roll-Off Container 38m³ with Hydraulic Tailgate and Grain Pusher * Type ECO-2 * Year of Manufacture 2025 * Volume 38m³ * Dead weight 3,200 kg * Payload 18,800 kg * Load capacity 22,000 kg * Hydraulic volume tailgate * Grain pusher Fgodpfswggn Uox Ap Doh * All-round net hooks The RSM universal container, the all-rounder for all requirements, complies with the standards of DIN 30722 Part 2 and is an ECO Type 2 with a permissible total weight of 22,000 kg. We are happy to provide you with further information.