Used Almig Variable Xp 75 for sale (10,130)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Bdedpfx Asvf E Avsk Heb Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 25 kg, tank capacity: 75 l, warranty duration: 12 months, KARCHER NT 75/1 Me Ec H Z22 INDUSTRIAL VACUUM CLEANER 2018 MANUFACTURED NEW ORIGINAL ACCESSORIES - SAFETY FILTER BAG, SUCTION TUBE, SUCTION HOSE, ELBOW, AND CREVECT + FLAT NOZZLE Bjdpfxey Humxo Ak Hedb Industrial vacuum cleaner designed for collecting dry and wet dirt. It is also suitable for removing combustible dust and other Class H dust in areas with explosion hazards designated as Zone 22. A powerful brushless motor ensures long service life. The vacuum cleaner is fully grounded, and the appropriate accessories are electrically conductive to prevent discharge. The device has been thoroughly overhauled and is ready for operation. Thanks to the 75-liter stainless steel tank and the sturdy chassis with an adjustable transport handle, you can easily remove large amounts of dust, coarse dirt, or liquids from the work area. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, to which we cordially invite you. TECHNICAL DATE: Power supply parameters (V/Hz): 220 - 240 / 50 - 60 Air flow rate (l/s): 61 Vacuum (mbar/kPa): 220 / 22 Tank capacity (l): 75 Rated power (W): max. 1000 Nominal diameter ( ): ID 40 Power cord length (m): 10 Cable material: Rubber Sound pressure level (dB(A)): 76 Colour: Silver Weight without accessories (kg): 25.1 Dimensions (L x W x H) (mm): 695 x 540 x 1012 ORIGINAL EQUIPMENT: Safe Filter bag: 1pc. DN 40 suction hose - 4 m DN40 suction pipe - 1 m DN40 elbow Crevice nozzle Flat nozzle

Condition: new, functionality: fully functional, Year of construction: 2023, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Bdsdpfx Akswuykxe Heb

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Bedpfx Akjy Erxvs Hodb current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2026, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, power: 11 kW (14.96 HP), electrical fuse: 32 A, Spiral Mixer Kemper Model: SP 75 Proven technology ... time-tested and reliable! Dough mixer with manual control 2 speeds, 2 timers Robust engineering Stainless steel bowl and spiral Dimensions: 800 x 1150 x 1280/1700 mm (W x D x H) Connection: 400V, 32A CEE plug Used machine, cleaned With warranty + spare parts service Options: Delivery service Bjdpfx Akov D Tkfj Hjdb Maintenance contract Service package Spare parts box Instruction & commissioning Leasing & rental service Visit our large spiral mixer exhibition!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2022, total length: 1,150 mm, total width: 800 mm, total height: 1,370 mm, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, electrical fuse: 32 A, Kemper SPL 75 Spiral Mixer Proven kneading machine for your doughs! 2 timers Spiral mixer with 2 speeds Stainless steel bowl and spiral Connection: 400 V Robust mechanics! Used machine Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Maintenance contract Spare parts box for increased safety! Bedpfx Aeyhzmwok Hjdb Delivery service Training & commissioning Visit our large showroom!

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Gühring / Unisto / Hartner, Spiral drill bits, 11 pieces, Ø 51 - 75 mm Bdjdpoy A Ihnefx Ak Hob -Type: Double cutter, MK5 chucks -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 650/430/H75 mm -Weight: 44 kg

Condition: good (used), End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: 75 x 75H Sp 5000 KHSS-E 75x75x27 Bodpfx Akoy A Embe Hsdb -Hole: Ø 27 mm -Cutting material: HSS-E -Price/Fee: complete -Transport dimensions: 150/75/H75 mm -Weight: 2.9 kg

Condition: good (used), End mill, end mill, cutter, shell cutter -Manufacturer: Fette, end mill with longitudinal groove, 2 pieces -Type: Fette 75 x 75H Sp 880 HSS Bedpfx Akey A Ehfo Hjdb -Hole: Ø 27 mm -Cutting material: HSS -Price/Fee: complete -Transport dimensions: 155/75/H75 mm -Weight: 3.3 kg

Condition: used, Year of construction: 2013, operating hours: 5,200 h, Weight: 5600 kg with 1 loading bucket: SWE MS 03 without fork tines! Bodpfx Ajy H Uwdek Hsdb

Condition: used, mileage: 2,87,502 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2019, emission class: euro6, color: white, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, fog lights, immobilizer system, power assisted steering, traction control, = Additional options and accessories = - Autoradio - Climate control Bdjdoy Hvw Eepfx Ak Hjb - EBS - Electrically operated mirrors - Hydraulic power steering - Sun visor = More information = Engine capacity: 2.143 cc Dimensions (LxBxH): 848 x 296 x 208 cm Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 50%

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D41VW 34 C 4 NJW 75 -Pmax: 350 bar Bedpfx Aksy Atrfo Hsdb -Quantity: 1x valve available -Dimensions: 240/95/H185 mm -Weight: 10.8 kg

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH CS-75, a 75-ton capacity cement silo, is an ideal solution for concrete plants, block production facilities, and ground survey applications thanks to its high durability and functional design. This silo, which can be manufactured in bolted or welded types according to need, is easy to transport and can be conveniently assembled on site thanks to its modular structure. The bolted version offers advantages in logistics costs as it can be transported in a 40 ft. OT container or a standard truck. The CS-75 is equipped with all safety and operational equipment for efficient use. The maintenance platform located between the legs, the cement filling pipe, internal and external manholes, safety railings, and special roof flanges for the pressure relief valve maximize the system's safety. Furthermore, butterfly valve connections, upper and lower level indicators, air filters, and a manual discharge system keep silo operations fully under control. Laser cutting technology used in bolted type production ensures perfect fit and long life. Superior protection against external factors is provided by applying 140 microns thick anti-corrosive and epoxy paint to all surfaces. CS-75 - 75 Ton Cement Silo Technical Specifications Bodpoxpi Imofx Ak Hsdb Silo Capacity: 75 tons (58 m³) Silo Height: 15,880 mm Silo Diameter: Ø 3,060 mm Number of Legs: 4 Outlet Diameter: Ø 300 mm Silo Weight: 6,360 kg Leg Material: 219x5 mm steel pipe Body Material: ST-37 / 5 mm metal sheet Cone Material: ST-37 / 6 mm metal sheet Top Cover: ST-37 / 4 mm metal sheet Painting: 1 coat of anti-corrosive + 2 coats of epoxy paint Why Choose CONSTMACH CS-75 Cement Silo? CONSTMACH combines quality and engineering in industrial storage solutions to offer users durable and reliable products. The CS-75 is tested with ANSYS Workbench CAE analyses to ensure maximum durability under all conditions. The precision workmanship in the production process, the use of high-quality steel, and the easy assembly features protect your investment for many years. By choosing CONSTMACH, you get a safe and efficient cement storage system. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Bdodpfx Akew Emhfs Hsb Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg Bdsdpfx Ajydi A Isk Hsb

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator Bedpfx Asi Dtb Aek Hedb 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Bodpfeiyyndox Ak Hedb Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. Bjdpfx Akoiyynws Hedb We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: ready for operation (used), The FluidX HT121TS is a semi-automatic sheet heat sealer designed for laboratory plate sealing. Key Technical Specifications Device Type: Semi-automatic sheet heat sealer. Bsdpfxsy D D Ums Ak Hsdb Weight: Approximately 5 kg (net). Application: Used for applying thermal seals to microplates, typically in conjunction with FluidX sample storage tubes. Format Compatibility: Designed to handle various plate formats common in automated workflows. Operational Features Variable Temperature: Supports a range of temperatures for different sealing materials. Manual/Semi-Automated Integration: Compatible with both low-throughput manual tasks and high-density automated storage systems. Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system Bsdpfxehyugle Ak Hodb - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips Bdedpfx Aksyzr Tfe Hob - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, variable speed geared motor -Handover: in its current condition as inspected -Condition: Functional, without brakes -Manufacturer: Nord, adjustable geared motor -Type: SK 42 F-R210 U-112 M/4 BRE -Speed: 14.5-109 rpm -Engine: Type SK 112 M/4 BRE60 -Power: 4.0 kW -Protection rating: IP54 -Shaft: Ø 45 x 90 mm -Brake: 60 Nm -Dimensions: 840/580/H285 mm Bodpfxowl Uxle Ak Hedb -Weight: 105 kg

Condition: good (used), Year of construction: 2011, Electric chain hoist, crane, overhead crane, assembly crane -Manufacturer: Yale, electric chain hoist -Type CPE 75-1.6 Load capacity 7500 kg -Main stroke: 1.6 m/min -Chain length: 9 m Bdjdpfox E Sq Eox Ak Hjb -Transport dimensions: 1200/800/H520 mm -Weight: 235 kg

Condition: used, mileage: 7,35,000 km, power: 353 kW (479.95 HP), first registration: 01/2019, fuel type: diesel, overall weight: 20,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, soot filter, * Net price Bdedpfjy Hyt Dox Ak Heb * XP cab with 2 bunks * ZF gearbox * Intarder * 2 tanks (710 l + 480 l) * Stand air conditioning * Refrigerator box * XENON headlights * Full spoiler kit * Sun visor * Fog lights * Heated seat * ACC distance warning * Lane departure assistant * German vehicle * Good condition WhatsApp: Errors and interim sales excepted! Sale takes place under exclusion of any warranties!! - We speak Russian - We speak English - We speak Polish - We speak Ukrainian - We speak Spanish

Condition: good (used), mileage: 5,88,754 km, power: 375 kW (509.86 HP), first registration: 12/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, = Additional options and equipment = - Adaptive cruise control - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Roof spoiler - EPS (Electronic Stability Program) - Speed limiter - Intarder - Load protection grille - Alloy wheels - Air-suspended seats - Particulate filter - Radio/CD player - Rain sensor - Sunroof - Sleeper cab - Side door - Seat heating - Voice control - Lane departure warning system - Auxiliary heater (parking heater) - Toolbox - Xenon lighting = Additional information = Axle configuration Front axle: Steering; Suspension: leaf suspension Rear axle: Suspension: air suspension Weights Unladen weight: 8,423 kg Payload: 10,577 kg Gross vehicle weight: 19,000 kg Maintenance, history, and condition APK (main technical inspection): valid until 11/2026 Technical condition: good Cosmetic condition: good Identification Reference number: 7 Further information Contact Emad Al Shogran for more information. Vehicle number: 7 Iveco Stralis 510 XP / Retarder / Parking air conditioning / Euro 6d .: WJMM62AU90C417562 Transmission: Automatic Bjdpfxsy H Dulo Ak Hedb Suspension: leaf / air Air conditioning Retarder Engine brake Cruise control Refrigerator Parking air conditioning Auxiliary heater (parking heater) Navigation system Distance warning assistant Lane departure warning assistant Euro 6d 2 x tanks = Company information = No liability for printing or typographical errors. Subject to change, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email: