Used Axial Liquefier for sale (610)

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5000 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Ljdpfxjv Dxw Rj Alyjah Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: used, mileage: 1,12,439 km, power: 132 kW (179.47 HP), first registration: 02/2017, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,837 mm, total width: 2,442 mm, total height: 2,743 mm, loading space length: 3,800 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, central locking, electronic stability program (ESP), Cab and Comfort* Cab 'C', 2240 mm wide, 1620 mm long * Driver's air-suspended comfort seat * Co-driver's bench seat for 2 people (individual seats) * Seat covers in standard quality * Washable interior door panel Laedpfxezdbk Ro Alysh ----?Electronics and Instruments* Dashboard, km/h 'High-Line' * MAN Tronic (on-board computer) * MAN Media Truck 12 V radio with 5" color display * Electric windows for driver and co-driver * Digital tachograph (CONTI) * Mechanical main battery switch, 2 x 12V 88Ah batteries ----Lights & Visibility* Headlight range adjustment * Halogen twin headlights H7 * Position and marker lights * Sun visor * Curb mirror on the right, EU front mirror on the co-driver's side * Rear-view and wide-angle mirrors, mechanically adjustable * Cab rear wall with tinted window ----Chassis and Drive* Engine: D0834LFL67, 180 hp / 132 kW, EURO6 SCR, 700 Nm * Engine brake, flame starter system * Transmission: ZF 6S-800 OD * N-PTO NH/4C without flange f=0.67, right-hand side & MEILLER AXIAL pump * Leaf/leaf spring suspension * Differential lock, rear axle ----?Safety and Driver Assistance* Electronic Braking System (MAN BrakeMatic) * Anti-lock Braking System (ABS) * Anti-Slip Regulation (ASR) * Electronic Stability Program (ESP) * Lane-Guard System IV (LGS IV) * Disc brakes, front and rear ----Body & Chassis * Tipping platform 3800x2350 mm, manufacturer MEILLER * Platform floor STE 500 - 3 mm * Side boards STE 380 - 2 mm, side side boards 400 mm, front wall 700 mm, rear side board 400 mm * Flush-mounted tie-down points in the platform floor * Folding side walls, oscillating and folding rear wall * Access ladder under the tipping platform ----* Tow hitch RINGFEDER 4040 G145 B * Ball-head tow hitch ROCKINGER 3004 (3500 kg) * Hydraulic connection at the rear for a three-way tipping trailer ----* Tire dimension front axle: 9.5R17.5 * Tire dimension rear axle: 9.5R17.5 * Fuel tank: 100 l * AdBlue tank: 10 l * Technically permissible total weight: 7490 kg * Unladen weight: 4600 kg * Permissible trailer load: 11235 kg * Overall length: 5837 mm * Wheelbase: 3050 mm ----Vehicle number/Vehicle: 12179----Errors and prior sale excepted----Advertising and various lettering have been digitally removed.-----We will gladly assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. We can also offer the following services for an additional charge:----Trade-in of your old vehicleTÜV/SP inspectionComplete export processingArrangement of financingApplication for export license platesVehicle transport and deliveryRegistration of vehiclesRecovery and vehicle transport----YOUR VTS TEAM

Condition: used, Year of construction: 2011, Control Siemens Sinumerik 840D sl centre height 1.150 mm z-axis 1.559 / 307 mm x-axis 16 - 80 mm Swing circle diameter 92 mm roll spindle turning speed range 0 - 3.000 U/min Rolling mill roll clearance - axial 0,025 mm feed speeds infinitely variable 0 - 30.000 mm/min Lodszdk Ikopfx Alyeah rapid traverse 30.000 mm/min Swivel angle range ±3,2 ° Max. speed - main spindle 375 U/min piston stroke 400 mm diameter of piston 90 mm with effective piston area 63,6 cm² In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 8,000 rpm, bar diameter (max.): 26 mm, number of axes: 7, This 7-axis Maier ML 26 C1 was manufactured in 2000. It features a maximum bar diameter of 26 mm and an impressive spindle speed of 8000 rpm. The machine includes 5 turning tools and 3 axial drilling tools, along with a bar feeder model Iemca Boss 322r-E. If you are looking to get high-quality turning capabilities, consider the Maier ML 26 C1 swiss type turning machine we have for sale. Contact us for further details. • Axis Head 1: • Axes: X, Y, Z, C • Z1 axis travel: 210 mm • Main spindle collet: 161E • Guide bushing: T227 • Tooling: 5 turning tools (16 mm), 3 axial drilling/boring tools, 3 ER16 live tools (up to 8000 rpm) • Axis Head 2: • Axes: X, Z, C • Sub-spindle speed: up to 8000 rpm • Sub-spindle collet: 161E • Back-working: 4 tools (currently set up with 1 turning tool and 3 ER16 live tools), plus 1 ER16 live tool axial with the sub-spindle • Maintenance (2025–2026): • Replaced all pneumatic lines with new, durable lines • Replaced position sensors in main spindle mechanical lock • Replaced position sensors in sub-spindle mechanical lock • Replaced position sensors in sub-spindle work ejector • Mechanical realignment and measurement of main spindle, guide bushing, and sub-spindle • Realigned sub-spindle frame assembly and sub-spindle back-working tools • Replaced all spindle bearings in sub-spindle assembly • Replaced spindle bearings in sub-spindle axial milling tool • Refurbished live milling tools on sub-spindle side Additional equipment • Bar feeder: Iemca Boss 322r-E, model year 2007, 17 mm guide channels Laedpfjzdr H Iex Alyjh Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2015, condition: new, Unused (NOS) Sulzer industrial agitator for tank mixing, with SCABA-S agitator head, stainless steel shaft, and SEW geared motor. The unit is from 2015 and is in new, unused condition. Manufacturer: Sulzer Pumps Sweden AB Type: SVVT-40 / 40SVV35T-M1 Year of manufacture: 2015 Condition: NOS (unused, stock item) Application: Tank agitator / Industrial agitator Agitator type: SCABA-S Motor power: 1.10 kW Process power consumption: 0.80 kW Mains frequency: 50 Hz Motor speed (n1): 1,500 rpm Output speed (n2): 244 rpm Gearbox manufacturer: SEW-Eurodrive Gearbox type: KAF47 Gearbox design: Helical-bevel gearbox Gear ratio: i = 5.81 Motor adapter: 24FF165 Gearbox mounting position: M1 Flange: Special flange Flange diameter: 340 mm Bolt circle: 295 mm Mounting holes: 8 × Ø22 mm Shaft length: 500 mm Laedpfx Alszlcfwsysh Shaft design: Solid shaft Shaft material: Material 1.4462 (LDX Duplex stainless steel) Number of agitator elements: 1 Propeller type: 3SHP1 Propeller diameter: 475 mm Propeller material (hub): Material 1.4462 (LDX) Blade thickness: 4 mm Blade attachment: welded Direction of rotation: right (clockwise) Axial force: 244 N Torque: 43 Nm Bending moment: 74 Nm Minimum stiffness of tank mounting: 250,517 Nm/rad Tank medium (design): Vegetable oil Design temperature of medium: 65 °C Paint color: RAL 5017 Y-ring: present Flushing connection: no flushing

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,880 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, traction control, trailer coupling, - Heated exterior mirrors - Heated mirrors - Passenger seat - Leaf suspension - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio/multimedia system - Beacon light - Reversing camera - Disc brakes - Sliding roof - Seat heating - Sun visor - Lane departure warning system - Stability control Ljdpfx Ajzbbqrjlyoah - Windshield Internal number for customer inquiries: 5-128 MAN TGM 18.320 4x2 BL WITH MEILLER Trigenius 3-Way Tipper Body AND PALFINGER CRANE Vehicle: * MAN TGM 18.320 4X2 BL crane tipper * Tipper body 4200x2420 mm, manufacturer MEILLER Type TRIGENIUS (new model series) Front wall height 800 mm Side wall height 600 mm Fully retractable lashing eyes in the platform floor * Cab CC: the compact (narrow, short, standard height) * Wheelbase 3,875 mm * Suspension: leaf/air * Drivetrain 4x2 * Tires FA 2x 295/80R22.5, RA 4x 295/80R22.5 * Gross vehicle weight 18,000 kg * Automatic transmission MAN PowerMatic 08.13 OD (8-speed gearbox) * Diesel engine MAN D0836 LFLBI, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6e * Transmission feature: EfficientRoll * Cruise control * Differential lock on rear axle * MEILLER axial pump 270/45 * Tipper body controls in cab * MAN EasyControl panel, 4 functions, operable from outside with door open * Tow coupling RINGFEDER type 4040/G150B * 2-line brake connection at end of frame * Sun visor in front of windshield * Central locking with remote * MAN Mediasystem Navigation Advanced 7" * Turn-assist system * Electronic Stability Program (ESP) * Traction control system (ASR) * Cruise control (FGR) * Adjustable speed limiter, Limiter (engine governor) * Reversing motion system * Smartphone integration * Heated and electrically adjustable rear- and wide-angle mirrors * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating * Adjustable height seatbelt on driver’s seat * 2 work lights on cab roof * 2 halogen beacon lights on cab roof * And much more Loader crane: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID truck-mounted loader crane with KTL coating * Hydraulic 4-stage extension - 11.7 m * Lifting moment 142.4 kNm (14.5 mt) * Slew range 420° * Electronic overload protection PALTRONIC incl. emergency stop and load indicator * Hour meter with service interval display * Scanreco radio remote control * PALTRONIC load and overload display at control panel * 5 selectable speeds Optionally also available from stock as Fassi F135AC0.24 !!! Financing, leasing, or hire purchase available. This is a non-binding offer. Subject to prior sale, errors, and modifications. Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Gross Vehicle Weight (GVW): 18,000 kg Axle configuration Brakes: drum brakes Front axle: Tire size: 385/65-22.5; steering; suspension: leaf springs Rear axle: Tire size: 315/80-22.5; differential lock; suspension: air suspension Functional Crane: Palfinger PK 14501 K SLD...

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN461431, Year of construction: 2013, operating hours: 11,449 h, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 1,800 mm, fork length: 2,000 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 6,000 mm Free lift: 1,800 mm Load center: 500 mm Mast type: Triplex with full free lift Overall height: 2,700 mm Total height: 2,700 mm Fork length: 2,000 mm Tire condition: 90% Fuel: Liquefied petroleum gas (LPG) Fuel type: Gas MACHINE DETAILS Manufacturer: Jungheinrich Model: TFG 430s Year of manufacture: 2013 Operating hours: 11,449 h DGUV inspection valid until: Hydraulic system: leak-proof Maintenance condition: very good Timing belt and water pump: renewed Gas system: renewed EQUIPMENT Triplex mast with full free lift Side shifter Fork positioner Full cabin Raised cabin Heater Head protection Pallet forks Trailer coupling Lighting Additional headlights Front work lights: 6 Rear work lights: 2 Ljdpfxezmui Rs Alysah Air-suspended seat Additional hydraulic circuit ZH2 with quick coupler Hydraulic buffer Double bottle holder

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Ljdozl A N Nopfx Alyjah Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: excellent (used), functionality: fully functional, color: white, overall weight: 7,000 kg, Year of construction: 2020, Equipment: air conditioning, 40-FT BITCOIN MINING CONTAINER MOBILE DATA CENTER INFRASTRUCTURE For sale is a professionally fitted 40-ft industrial container, type "HPC Mobile Pro 180U", manufactured in 2020. According to the documentation, the system was designed for up to approximately 180 air-cooled ASIC miners. Only the fitted container infrastructure is being sold. ASIC miners, GPU servers, and external power supplies are not included. TECHNICAL DATA • 40-ft industrial container • Type: HPC Mobile Pro 180U Lsdszt Sw Sopfx Alysah • Date of manufacture: 17.06.2020 • Capacity: up to approx. 180 air-cooled ASIC miners, according to layout • Connection power: 2 × 120 kW or approx. 240 kW, according to seller • Electrical: 400 V, 3P + N + PE, 50 Hz • 4 × 250-A main switches according to electrical plans • Power distribution with Schneider Electric components • Control cabinets IP55 according to plan • Open steel rack constructions • Powerful axial fans • Inlet and outlet louvers with filter surfaces • Mitsubishi split air conditioning unit for the technology/network area • CAT cabling, patch panels, and switch infrastructure • Camera and alarm components according to documentation • Technical documentation with approximately 66 pages • Weight: approx. 7 t, according to seller • Location: 8957 Spreitenbach, Switzerland POSSIBLE APPLICATIONS Bitcoin/ASIC mining, expansion of a mining farm, hosting/colocation, use of inexpensive or surplus electricity, as well as compute, edge, test, or retrofit projects. INSPECTION AND CONDITION Used condition with typical signs of wear and tear. Functionality has not been tested. Inspection is possible and highly recommended by appointment. A sales dossier, detailed photos, video, layout, electrical, and circuit diagrams, as well as the documentation, can be provided to qualified interested parties. All technical specifications are based on available documents or seller information. Before connection and commissioning, the system must be inspected, adjusted, and approved by a qualified electrician. SALE AND TRANSPORT B2B sale ex location Spreitenbach. Loading, crane, transport, insurance, export/import, customs, permits, and commissioning are the responsibility of the buyer. No returns; liability for defects is excluded to the extent permitted by law.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,659 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 2,300 mm, spindle speed (min.): 3,250 rpm, total width: 9,700 mm, total length: 7,400 mm, total height: 5,200 mm, position of the milling head: ORIZZONTALE E VERTICALE, spindle diameter: 150 mm, travel distance W-axis: 900 mm, table load: 30,000 kg, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, table length: 3,000 mm, table width: 2,000 mm, quill diameter: 150 mm, grinding spindle motor power: 53,000 W, torque: 25,000 Nm, spindle nose: ISO 50, number of slots in tool magazine: 120, Equipment: rotational speed infinitely variable, LAZZATI CNC BORING MACHINE, T-SHAPE, HB 150T CNC Heidenhain TNC 640 X-axis travel: 6,000 mm Y-axis travel: 2,600 mm Z-axis travel: 2,300 mm W-axis travel: 900 mm Rapid traverse rate, X-axis: 12 m/min Rapid traverse rate, Z-axis: 15 m/min Rapid traverse rate, Y-axis: 15 m/min Rapid traverse rate, W-axis: 7.5 m/min Spindle diameter: 150 mm Spindle connection: ISO 50 BBIG plus DIN 7388 Spindle rotation speed: 3,250 rpm Spindle motor power: 53 kW in S1 – 65 kW in S6 Max. axial thrust during drilling: 25,000 N Automatic universal head, 1° x 1° D’Andrea UT5/500s head Rotary table dimensions: 2,000 x 3,000 mm Table load capacity: 30 tons Tool changer: 120 positions Width: 9,700 mm Height: 5,200 mm Depth: 7,400 mm Weight: 750 kg INCLUDES: - Chip conveyor Ljdpfeznl Elox Alysah - 3-position head changer - Coolant system with through-spindle coolant supply, bar 35, coolant tank capacity: 1,000 liters USED MACHINE YEAR 2015 – INSTALLED 2017

Condition: like new (used), Year of construction: 2026, functionality: fully functional, overall weight: 12,000 kg, ECHNICAL DESCRIPTION: Max. Module 5/6 Max Diam. Ext. Nominal 300mm Maximum axial hob slide travel(Z) 360mm Maximum hob head swivel angle ± 35 deg Max. Hob Length 180mm Max. Hob Diam 150mm Max. Hob Shift 200mm Max. Hob speed 1000rpm Max. table rotation 500rpm EQUIPMENT: - Sinumerik One - Dialog Program - Table with Direct Drive – Chip conveyor – Lubrication and hydraulic unit – Full coverage of the workspace – Documentation Ljdoz Drbpepfx Alyoah

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 192 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 290 mm, spindle nose: A2-8, number of spindles: 2, number of tool turrets: 3, Used Nakamura Tome Super NTY3 Jumbo machine (2 spindles, 3-turret lathe with Y-axis) Max. turning diameter: 325 mm Max. turning length: 250 mm Lsdpfx Alszr D A Royoah Distance between spindle centers: 260 - 1095 mm 11x Rotary tool holders 20x Boring tool holders 15x Driven angled tool holders 18x Driven axial tool holders 2 x Hainbuch collets 80 mm (main and counter spindle)

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. Lasdpfezn N Ecox Alyoh • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Auction of a Kornit Allegro textile printer! The machine is still operational and available for inspection in the Greater Paderborn area until calendar week 30. After disassembly in calendar week 30, the machine will be stored. The machine will be made available for free loading in the Greater Wuppertal area. EQUIPMENT ACS dryer Material feed Material take-up Caldera RIP software The following technical data is based on the manufacturer's specifications. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Lasdpfx Alezquifjysh Max. media thickness: 15 mm Max. roll width: 180 cm Max. roll outer diameter: 40 cm Max. roll weight: 50 kg Compressed air: 6-8 bar / < 0.4 m³/min MACHINE DETAILS Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Black, Red, Green, Gray, Cyan, Magenta, Yellow Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pretreatment) Print width up to 180 cm Print speed: Up to 200 m²/hour Resolution: 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes using staggered line printing Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feeding system: Axial unwinding device with adjustable fabric width and tensioning mechanisms Weight: 3500 kg

Condition: new, Year of construction: 2025, Cryogenic centrifugal pump unit CRYOBASE CPD 160, year 2025 For sale is a like‑new cryogenic centrifugal pump unit CRYOBASE model CPD 160 with horizontal electric drive motor for liquid nitrogen / oxygen / air (LIN / LOX / LAR). The pump has never been in service, was stored dry, and only mounted for test fitting; all original nameplates and safety stickers are in place. Key technical data Type: centrifugal pump CPD 160 for cryogenic liquid gases Flow rate: approx. 300 l/min Differential pressure / head: 22 bar / 160 m Motor speed: 6,750 rpm Motor power: 22 kW, IE3 efficiency Fluid: LIN / LOX / LAR, temperature down to about −176 °C Design: horizontal execution, axial suction flange, side discharge flange Laodpfxeznv Azs Alysh Required NPSH: 0.5 m This unit is perfect for industrial gas plants, storage and distribution systems, or upgrading existing cryogenic tank stations. Machine location: Cologne, Germany; inspection by appointment, worldwide shipping on request.

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, trailer coupling, - All-wheel drive - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Leaf suspension - Differential lock - High beam - Catalytic converter - Automatic climate control - Air-suspended seats - Particulate filter - PTO - Radio/multimedia system - Reverse camera - Seat heating - Sun visor - Lane departure warning assistant - Stability control - Windshield Internal reference number for customer inquiries: 4-031 MAN TGM 18.320 4x4 BB WITH PAVIC 3-way Tipper Body AND PALFINGER CRANE Vehicle: MAN TGM 18.320 4X4 BB Truck-Mounted Crane Tipper Cab CC: the compact one (narrow, short, standard height) Wheelbase 3,875 mm Suspension leaf/leaf (also available as leaf/air on the leading axle) Drive 4x2 Tires front axle 2x 295/80R22.5, rear axle 4x 295/80R22.5 Total weight 18,000 kg Automatic transmission MAN TipMatic Diesel engine MAN D0836 LFLAP, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6e Transmission feature: EfficientRoll Cruise control Differential lock on rear axle MEILLER axial pump 270/45 Tipper operation control in cab MAN EasyControl operation panel, 4 functions, operable from outside with door open Trailer coupling RINGFEDER Type 4040/G150B Brake connection 2-line at end of frame Sun visor in front of windshield Central locking with remote MAN Media System Navigation Advanced 7-inch Online traffic for navigation function Smartphone integration Heated and electrically adjustable wide-angle and rear mirrors Driver comfort seat air-suspended, with lumbar support, shoulder adjustment, and heating Height-adjustable driver’s seat belt 2 work lights on cab roof 2 halogen beacon lights on cab roof GSR equipment (reverse camera, turning assistant, tire pressure monitoring, etc.) Body: 3-way tipper body 4200x2420 mm, Manufacturer PAVIC Front wall height 800 mm Side wall height 600 mm Lsdpfx Aloy E Hx Rjysah 8 fully recessed lashing rings in platform floor (4 per side) Material: Hardox 450 Offset for horizontal mounting of the side wall with rubber pad (long goods transport) Springs as side wall lifting aid for easier opening and closing Tipper body galvanized and side walls, etc. completely painted with 2K truck paint in RAL9016 Subframe galvanized and painted in RAL 9011 Left and right side in one piece, can be opened pneumatically on both sides from the cab via air valve, all sides openable from below (pendulum), manual from top to bottom, removable center stanchions. Springs as side wall lifting aid for easier opening and closing Loader Crane: Palfinger PK 14.501 K SLD 5 PALFINGER SOLID TRUCK LOADER CRANE with KTL coating Hydraulic four-section extension – 11.7 m Lifting moment 142.4 kNm (14.5 mt) Slewing range 420° Electronic overload protection PALTRONIC incl. emergency stop and load display Operating hours counter with service interval display Scanreco radio remote control LOAD DISPLAY and overload PALTRONIC on remote control unit 5 selectable speeds Financing, as well as leasing or lease-purchase, is possible. This is a non-binding offer. Subject to prior sale, errors, and changes...

Condition: ready for operation (used), Siemens 1FT5046-0AF71-1 - Z AC-VSA Motor SN: EE783215102001 - Z = G45: Holding brake installed (EBD 0.2B / 24V - 13W) and H22 Encoder system: 1000 pulses/rev (axial cable outlet), used, good condition, 100% functional, delivery as shown in the photos. Ljdpfx Aley Nplnjyeah

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 500 mm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details. • CNC: OSP U100L • Max turning diameter: 340 mm • Max turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increment) • Rapid feed: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 Lsdpey N Sabofx Alyeah • Bar capacity: 65 mm • Live tooling: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Additional equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blow • Turning tool holder kit • 4 radial live tools • 4 axial live tools Technical Specification Taper Size VDI 40 Counter Spindle No Driven Tools Yes

Condition: used, Manufacturer: WEINIG Type: UC6 Year of manufacture: 1997 Condition: untested Machine description/technical data WEINIG UNICONTROL6 window manufacturing system including Oertli tool set IV68 and IV77 wood + wood/aluminum (all cutting drawings available upon request) Lajdpfxozx Smqj Alyoh Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Manufacturing possibilities: Individual parts, double parts, frame-wise, series production, edge profiling Control of tool positions (longitudinal and transverse machining) via selector switch on the control panel Transverse machining: - electronic length stop for wood lengths up to 2,600 mm, with auxiliary stop for wood lengths up to 3,600 mm, with slot table that moves along and has separate control -Studio window setup: Swiveling length stop ± 60° with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for the production of angled parts Cut-off saw 3 kW Axial adjustment manually with mechanical digital display Laser guide for cut-off saw to detect the section Cut-off saw pneumatically controlled, mortise dimension adjustable via mechanical numerical display Mortise and slot spindle 11 kW (standard 7.5 kW) Tool clamping length: 320 mm Number of tools: 4 x 80 mm Axial adjustment: 240 mm Electronic spindle brake Longitudinal machining: 7 feed rollers in the infeed and 5 in the outfeed, high/low controlled for faster and shorter edge profiling process Synchronous spindle (vertical right) 7.5 kW Before the profiling spindle for splinter-free edge profiling Profiling spindle 11 kW (standard 7.5 kW) Number of tool positions: 4 x 80 mm, pneumatically controlled Axial adjustment: pneumatic Mechanical spindle brake Profile milling unit (horizontal above) 3 kW After the profiling spindle, radially controlled to 2 positions and axially controlled to 3 positions Mechanical spindle brake Profile milling unit (vertical right) at the end of the machine 3 kW Radially controlled to 2 positions and axially controlled to 3 positions Plunge automation: The plunging in/out at the beginning/end of the wood is controlled via 2 adjustable limit switches. Plunge tolerance ± 3 mm. Mechanical spindle brake Return conveyor to the operator including identification function for further processing Partial renewal of pneumatic hoses and extraction hoses in the machine required! Price in €: on request VAT: exclusive Availability & Location Location: Greater Freiburg area Available: promptly after dismantling Inspection: in operating condition / in operation Price in €: on request

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,910 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, trailer coupling, - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beams - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Particle filter - Radio/multimedia system - Rotating beacon - Rear view camera - Disc brakes - Sunroof - Seat heating - Sun visor - Lane keeping assist - Stability control - Windshield Internal number for customer inquiries: 5-133 MAN TGS 18.440 4x2 BL with MEILLER Trigenius 3-sided tipper body and PALFINGER crane Loading crane needs to be installed. Image 1 serves as an example. Truck available immediately, completion after order placement approximately 2-3 weeks! Vehicle: Diesel engine MAN D2676 LFAY, 353 kW (480 hp), 2,450 Nm torque, Euro 6e MAN TipMatic 12.28 OD driving program MAN TipMatic Performance, Efficiency and Offroad, up to 70,000 kg Drive 4x2 Suspension Leaf/Leaf Differential lock 3,900 mm wheelbase 300 l fuel tank volume, 60 l AdBlue tank volume Full brake assist High-performance engine brake MAN EVBec, adjustable Disc brakes on front axle, drum brakes on rear axles Trailer coupling ROCKINGER Type 500 G 6B Cab NN: the practical one (narrow, medium-length, normal height) Tilting roof, mechanical Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating Sunblind door window, inside, mechanical, driver's side Cool box Infotainment control MAN SmartSelect with touchpad and direct selection buttons MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced Navigation map Europe and Russia Online traffic for navigation function Auxiliary drive, gear-dependent, type NTX/10c in conjunction with axial pump for tipping hydraulics, MEILLER Type 270/63 Hydraulic connection for tipping trailer, end of frame Control option for lift/relief of trailer axles DuoMatic coupling Body: Meiller Trigenius D212, 4,200 x 2,450 mm Floor of tipper body, made of steel HBW 450, 4 mm Load securing with floor and side wall lashing eyes Loading crane: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID truck-mounted crane with KTL coating * Single-arm with Single Link Plus 15° * Hydraulic four-stage extension (4-stage hydraulic) = 11.6 m at 1020 kg * Slewing range 420° * Electronic overload protection PALTRONIC including EMERGENCY/OFF and utilization display * Hour meter with service interval display * Radio remote control Scanreco (joystick control) * 5th and 6th control circuit with hose reel * Outriggers hydraulically extendable * DISPLAY OF UTILIZATION and overload PALTRONIC on the remote control * 5 selectable speeds Financing, as well as leasing or hire purchase is possible. This is a non-binding offer. Subject to prior sale, errors and changes. Technical information Number of cylinders: 6 Engine displacement: 12,419 cc GVWR: 18,000 kg Laodjzd Skmepfx Alysh Axle configuration Brakes: Drum brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80-22.5; Differential lock; Suspension: Air suspension Functional Crane: Palfinger PK 14.501 K SLD5, behind the...

Condition: new, Manufacturer: HEIDENHAIN Type: ROD 780 ID Number: 383600-02 Measuring method: Incremental Design: Angle encoder with self-bearing Shaft design: Solid shaft Shaft diameter: 14 mm For separate shaft coupling Line count: 18,000 Output signal: 1 Vss / 1 Vpp sinusoidal System accuracy: ±2 arc seconds Lsdpfezcgufox Alyoah Electrical connection: M23 connector, 12-pin Cable length: 1.0 m Axial tolerance: up to ±1 mm

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, trailer coupling, - All-wheel drive - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Leaf suspension - Differential lock - High beam headlights - Catalytic converter - Automatic climate control - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio/multimedia system - Reversing camera - Seat heating - Sun visor - Lane-keeping assist - Stability control - Windshield Internal number for customer inquiries: 5-005 MAN TGM 18.320 4x4 BB WITH MEILLER-TRIGENIUS TIPPER BODY AND FASSI F135 AC0.24 CRANE Vehicle: MAN TGM 18.320 4X4 BB truck-mounted crane tipper 4200x2420 mm tipper body, manufacturer MEILLER model TRIGENIUS (new series) Front wall height: 800 mm Side wall height: 600 mm Fully recessed lashing rings in platform floor CC cabin: the compact (narrow, short, standard height) Wheelbase: 3,875 mm Suspension: leaf/leaf (also available as leaf/air on the leading axle) Drive: 4x2 Front axle tires: 2x 295/80R22.5; Rear axle: 4x 295/80R22.5 Gross vehicle weight: 18,000 kg MAN TipMatic automatic transmission MAN D0836 LFLAP diesel engine, 235 kW (320 hp), 1,250 Nm torque, Euro 6e EfficientRoll transmission functionality Cruise control Rear axle differential lock MEILLER axial pump 270/45 Tipper control in driver's cab MAN EasyControl control panel with 4 functions, operable from outside with door open RINGFEDER trailer coupling type 4040/G150B Ledjyy U U Aspfx Alysah 2-line brake connection at frame end Sun visor in front of windshield Central locking with remote control MAN Media System Navigation Advanced 7-inch Online traffic for navigation Smartphone integration Heated and electrically adjustable wide-angle and rearview mirrors Driver's comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating Adjustable height seatbelt on driver's seat 2 work lights on cab roof 2 halogen rotating beacons on cab roof GSR equipment (reverse camera, side turn assist, tire pressure monitoring, and more) FASSI F135AC.0.24 dynamic (4x hydraulic extension) Max. outreach: 10.85 m Slewing range: 390° Stabilizer span: 4.37 m, hydraulic outrigger All hydraulic cylinders double-acting Hard-chromed piston rods Electronic overload cut-off with FX500 emergency stop and visual alarm (at 90% and 100%) FASSI stability control FSC-M/1 incl. LMB II, pressure limiting and load holding valves Control block with 4 control valves, operable from both sides Control system for 2 additional functions with 2 hose guides, e.g., for grab operation Fassi RCS radio remote control maxi - 6 functions with 3 joysticks (2-2-2) 1 LED work light mounted on knuckle boom Work lights controllable via RCH/display (1 b/w function) Work lights Alternatively, with the following loading crane: Palfinger PK 14.501 K SLD 5 This offer is non-binding. Subject to prior sale, errors, and changes. General information Cab: Local traffic Technical information Number of cylinders: 6 Engine displacement: 6,871 cc GVW: 18,000 kg Axle configuration Brakes: ...

Condition: used, Year of construction: 1994, Technical details: turning diameter: 200 mm swing diameter: 260 mm turning height: 200 mm Tool table: 1054 x 400 mm Dimensions (L/W/H): 2200 x 2300 x 2300 mm weight: 3300 kg slide travel radial ( X-axis ): 520 mm slide travel axial ( Z-axis ): 200 mm no pallet circulating belt, no C-axis, no driven tools Ledeyk Utrspfx Alyeah *

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Laedpfowwkx Ejx Alyjh Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: good (used), Turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder, change holder, turning tool holder, clamp holder, turning tool holder Laodpfeww Elmjx Alysh -Tool holder: steel holder -Type: B IV hexagon 28 mm -Dimensions: see photos / technical drawing -Number: 2x holders available -Price: per piece -Dimensions: 210/42/H45 mm -Weight: 2.0 kg/pc.