Used Balconi Dmp 70T for sale (155)

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Fededtdwaepfx Aatepl Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Condition: used, Year of construction: 2008, We are offering this used STORTI GSI / 170-TA9 pallet production machine, year of manufacture 2008. Complete line includes: Block-making unit 2 nailing machines Turners Brand marking (burning) Corner cutting Stacker Fjdeyvggzspfx Aatjpl Fully operational, was in use until recently. If you have any questions or need further information, please contact us by message or phone.

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1200 1.800 x 900 x 220mm Fsdpjtxn Irsfx Aatopl ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed.

Condition: ready for operation (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM1400 2.000 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 1.400x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 10 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Fsdpfshun U Usx Aatopl Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: new, Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1000 Fpedpfx Aaotxn Ewetol 1.600 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 8 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by telephone to find a suitable solution for your application.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,350 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with interchangeable 2 kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight connection plate, with stroke compensation Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Splash guards in front of the 1st axle and behind each axle with anti-spray, according to EC Toolbox, stainless steel, w=600/h=400/d=500 mm, with polished door, lockable Hydraulic lift table after gooseneck, approximately 3000 mm long, hydraulically raised for crossing the gooseneck, with mechanical locking in the raised position. Operated with a wireless remote control Electric winch, 24 volts, pulling force 8165 kg, mounted centrally at the front on the gooseneck loading area, in a stainless steel box with a door (if technically possible, further review required), operated with a wireless remote control, cable length 35 m x approx. 10 mm, with roller cable guide and removable guide rollers on the gooseneck and rear slope. Tie-down points: Low-loader Gooseneck: 5 pairs of tie-down points recessed in the outer frame, each with 5 tons. 2 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame in the neck slope, each with 10 tons. Main platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 4 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Rear platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 5 pairs of tie-down points in the middle, each with 5 tons. 4 pairs of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last axle with steered trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand button Air suspension with lift/lower valve, with holding function for lowering + auto-reset function Wheels and Tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air brake system Fpsdpfx Aaei Ri E Uotsl Spring brake parking brake Vehicle - Driving Stability System Axle load recognition via EBS-CAN bus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) 2 fail-safe coupling heads in front, without connection cable EBS, Electronic Braking System with EBS socket in front, without connection cable Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights in front 2 white/red side marker lights in the rear Lights completely in LED version 2 x 7-pin and 1 x 15-pin fail-safe sockets in front Additional LED work lights, at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light Pair of warning signs, double LED illuminated and extendable to 3000 mm Floor Gooseneck with Mega Grip, covered with interlocking grating/low-loader platfo

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 26,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, low-bed semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions, 24 tons, 2-speed landing gear, single-sided operation, with straight lower section, without thrust compensation Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear, covering the entire width Fenders in front of the 1st axle and at the rear of each axle with anti-spray, according to EC Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for timber planks in the center of the loading area Timber planks 70 mm for widening to 3,000 mm Tie-down points, low-bed 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down mushroom heads, recessed at the top and side in the outer frame, each 10 tons 2 x on the gooseneck 9 x distributed in the low-bed area First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 8 pairs of beam pockets recessed in the outer frame, inner dimensions 70 x 40 mm (can be converted to 5 ton ring tie-down points) Axles + Suspension SAF drum brake axles Fpjdpei Ri E Rjfx Aatel Air suspension Wheels and tires 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Color-coded line routing for easy service. Spring parking brake EBS, electronic brake system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front, without connection cable with lift and lower valve Axle load recognition via EBS-CAN bus signal, for display on the instrument panel in the cab Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 1 LED rotating beacon with holder 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel sheet covering Storage box recessed in the ramp to the gooseneck followed by 70 mm softwood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm softwood floor Low-bed area including rear slope 9,200 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with SVK socket NW 10/3, without connecting hoses Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), color: other, Year of construction: 2026, Equipment: ABS, CONSTMACH jaw crushers are designed to offer high durability and superior crushing performance, making them ideal machines for primary crushing operations in quarries and mines. They have the capacity to process a wide range of materials, from the softest limestone to the hardest types of granite and basalt. Their robust construction, high flywheel torque, and special jaw geometry ensure high-efficiency crushing of material into uniform sizes. The advanced hydraulic adjustment mechanism allows for easy adjustment of the desired output size and minimizes operator intervention. CONSTMACH jaw crushers ensure long-lasting use with their forged chrome-nickel steel pitman structure, heavy-duty bearings, and automatic lubrication systems. The welded main frame, which has undergone thermal stress relief treatment, maintains maximum durability even under high vibration. The user-friendly maintenance design provides an uninterrupted and safe working environment during production processes. These machines can be integrated into stationary or mobile crushing plants, offering high flexibility for projects. CJC-90 Technical Specifications Fpjdpexqf Swsfx Aatel Mouth Size: 900 x 650 mm Motor Power: 75 kW Shaft Speed: 277 rpm Weight: 11,400 kg Min./Max. Adjustment: 50 - 150 mm Production Capacity: 90 - 270 t/h Why Choose CONSTMACH Jaw Crushers CONSTMACH is a symbol of quality and reliability in crushing and screening technologies. Each jaw crusher model undergoes production processes that comply with international standards, ensuring maximum performance, low operating costs, and a long service life. With customizable design options tailored to customer needs and an extensive service network, it supports your business's uninterrupted production goals. In terms of reliable performance, engineering quality, and after-sales technical support, CONSTMACH is the right choice for crushing systems. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. Fpjdpei Ri Hcefx Aatol If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 0 h, machine/vehicle number: 100, load capacity: 250 kg, mast type: telescopic, lifting height: 27,000 mm, Equipment: ABS, AUTO KOŠARA GSR B270T (2026) Stanje: Novo | Dostupnost: Odmah isporuka VOZILA – OPCIJE ŠASIJE Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 TEHNIČKE SPECIFIKACIJE Radna visina: 26,65 m Bočni doseg (80 kg): 16,0 m max. Bočni doseg (250 kg): 11,2 m max. Nosivost košare: 250 kg Radni zahvat: 450° Rotacija košare: 90° + 90° Standardna boja: RAL 9010 (šasija), RAL 9011 (podokvir i oslonci) Platforma: protuklizna aluminijska površina Košara: aluminijska, 1400 × 700 × 1100 mm, tip “Walk-In”, s veznim točkama za sigurnosni pojas Ukupna masa vozila: 3.500 kg Pogon: stražnji (4×2) Mjenjač: mehanički – 6 brzina / 500 Nm Motor: 2.3 L F1A EURO 6D – 136 KS Međuosovinski razmak: 3.750 mm Volan: s lijeve strane Kotači: 225/65 R16 M+S – jednostruki Kabina: jednostruka (2 sjedala) Boja vozila: Polar bijela FUNKCIJE I HIDRAULIČKO-ELEKTRONIČKI SUSTAV Automatske kontrole stabilizacije u košari i na zemlji Tip stabilizacije: prednji i stražnji – proširivi/vertikalni podupirači Mogućnost simultane manipulacije pokreta Automatsko podešavanje brzine motora Višenamjenski joystick u košari s proporcionalnim elektro-hidrauličnim kontrolama Elektronički upravljački sustav CAN BUS Automatsko niveliranje košare Home Function – automatski povratak u početni položaj Pokretanje i gašenje motora iz košare Ograničivač momenta s dvostrukom sigurnošću Inklinometar (kut nagiba) Fodpfsxvx N Tex Aatjpl Zaključni ventili s prirubnicom Zaštita kontrola u košari Sigurnosni bypass za spašavanje operatora Gumb za hitno zaustavljanje i gašenje motora s bilo koje kontrolne pozicije Ručna pumpa za hitne situacije Uređaj za sprječavanje sudara ruke i kabine Indikator zatvorenih stabilizatora u kabini Indikator centriranja zračnog dijela na košari Digitalni brojač radnih sati s indikatorom pozicije stabilizatora ELEKTRIČNI KOMPONENTI BOSCH, SCHNEIDER, GEWISS, PENNY+GILES, TELEMECANIQUE, OMRON HIDRAULIČNI KOMPONENTI BOSCH, BREVINI, ATLANTIC-FLUID TECH, WALVOIL, REXROTH, PIRELLI OPREMA I DODATCI Čelični naplatci Stražnji prozor u kabini Centralno zaključavanje s daljinskim upravljačem Upozorenje za razinu ulja i tlak u gumama ESP sustav + AEBS City Brake (aktivna sigurnost) Asistent za brzinu i inteligentni ograničivač brzine Indikator pospanosti vozača + snimač događaja Automatska kontrola brisača vjetrobrana Prednji zaštitni okvir kabine Zračni jastuci (vozač i suvozač) Bluetooth radio s USB utičnicom Power Take-Off (PTO) za hidrauličku pumpu Set PVC ploča 300×300×30 mm za oslonce DODATNE INFORMACIJE Financiranje putem leasinga ili kredita Cijena i konfiguracije na upit Ugradnja klima-uređaja po želji kupca uz nadoplatu! Registraciju vršimo za Hrvatsku! ORIGINAL C.O.C. UKLJUČEN U CIJENU: C.O.C. ORIGINAL ZA IVECO ILI MERCEDES C.O.C. ZA NADOGRADNJU GSR B270T NA IVECO ILI MB! SA TA DVA ORIGINAL C.O.C.-a. SE AUTO KOŠARA GSR B270T REGISTRIRA U BILO KOJOJ DRŽAVI U EUROPSKOJ UNIJI (EU) I IZVAN, BEZ IKAKVIH DODATNIH ATE- STIRANJA - DAKLE APSOLUTNO NEKOMPLICIRANO! Servis i rezervni dijelovi osigurani Svi komponenti europskog porijekla – maksimalna kvaliteta i pouzdanost! +++OD PROFESIONALCA ZA PROFESIONALCE+++ MI SMO: Uvoznik i generalni zastupnik za GSR auto košare za Hrvatsku, Sloveniju, Crnu Goru, B i H, Srbiju. Više od 30 godina iskustva u prodaji, servisu i najmu radnih platformi. Prva ruka – servis, rezervni dijelovi i tehnička podrška dostupni u cijeloj Hrvatskoj. Cijena: na upit

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 4080 mm Distance between uprights: 3680 mm Press force: 170 tons CNC control: DELEM DA65 Number of controlled axes: 4 Controlled axes: Y1 / Y2; X; R Number of backstops: 4 Stroke: 365 mm Fodpfx Aaozbugmotopl Overhang: 410 mm Installation height: 535 mm Working height: 1050 mm Hydraulic tool clamping, top and bottom: WILA Pneumatic die shifting CNC-controlled crowning DSP laser monitoring (new) CE marking Motor power: 37 kW Dimensions (length x width x height): approx. 5650 x 2350 x 3100 mm Weight: approx. 18.5 tons Condition: Overall in good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2010, Loading silo for asphalt mixes 270 tons with bucket conveyor Fpsdov H R Tpjpfx Aatjl - separate loading silo for various asphalt mixes - capacity: 270 tons - with bucket conveyor and bucket - can be attached to any existing system - control system

Condition: used, Year of construction: 2021, Electric lighting Standard cardan shaft / Fpjdpfstgpgrsx Aatel

Condition: used, Year of construction: 2023, Cardan shaft standard / Fodpfx Ajtdmi Uoatepl

Condition: good (used), Year of construction: 2008, pressing force: 160 t, stroke length: 290 mm, overall weight: 11,000 kg, working width: 4,100 mm, distance between side stands: 3,550 mm, Brand: Dener Model: DMP 160/40 Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis X stop: 650 mm Fjdpfx Aaswi Sktjtepl Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Weight: 11,000 kg

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3100 mm Frame width: 2760 mm Press force: 170 t CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 410 mm Fjdpfjyi Updex Aatepl Stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (Length x Width x Height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: 1 pc. new upper tool 1 pc. new 4-sided die The seller is not liable for any typographical or data transmission errors. The machine is provided in a condition appropriate to its age for appearance, technology, and wear; used machines are sold without any guarantee or warranty.

Condition: new, Year of construction: 2026, machine/vehicle number: 20251112004, fuel type: diesel, motor manufacturer: Perkins 1106A-70TG1, General information Field of application: Construction Weights Empty weight: 1.666 kg Functional Generator capacity: 150 kVA Dimensions of cargo space: 311 x 113 x 135 cm CE mark: yes Other information Fpedpfx Aaeyt Aq Retsl Fuel consumption: 22,7 Liter / Hour at 75% Load Generator: Leroy Somer TAL A44H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 185 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Year of construction: 2009, condition: good (used), Bous Waschfix WSA 70 T3 cleaning and degreasing system Fpsdpfopq N I Dsx Aatjl BOUS cleaning & degreasing plant Waschfix WSA 70 T3 Usable space: 700 mm filling quantity: 180l / 180l Temperature +70 / +70 °C heating: 12 / 6 kW suction: 0,25 kW drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Year of construction: 2009 Special equipment: Ultrafine filter Drain pump Filter monitoring Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: new, functionality: fully functional, mileage: 250 km, power: 125.03 kW (169.99 HP), first registration: 07/2022, fuel type: diesel, empty load weight: 2,370 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,800 mm, Year of construction: 2026, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, cable winch, central locking, cruise control, electronic stability program (ESP), full service history, non-smoking vehicle, onboard computer, power assisted steering, power mirror, tire pressure monitoring, trailer coupling, Sliding platform COULISSALU 3.5 high-quality extruded Aluminium platform 4990x2060 Radio remote control for platform and winch Slide for winch Fjdpfxey D Athe Aatopl Electric winch WARN -steel CABLE Towhook High flyer with LED lightbar and worklights Profiled railings with 12 lashing points Electric tray control box with integrated fuses Manual winch and ball translation on platform 2 galvanized wheel chocks Toolbox

Condition: good (used), Year of construction: 2012, total height: 135 mm, total width: 230 mm, total length: 345 mm, overall weight: 30 kg, Machine levelling feet 70ton(7units) Fpodpfx Aszqm Ndeatel MACH-ID 9762 Make: BWF Type: RK5 Year: 2012 Length:345mm Width:230mm Height:135mm Weight:30kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, operating hours: 12,647 h, power: 37 kW (50.31 HP), pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, oil tank capacity: 600 l, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S 5050mm x 400t Year of manufacture: 2010 Only 12,647 hours and 406,154 cycles!!! Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Overhang: 405 mm Stroke Y-axis: 400 mm Installed height: 720 mm Table width: 140 mm Motor power: 37 kW Oil volume: 600L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 mm Weight: approx. 34 t Fedpfjzzvfiex Aatspl Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control: Cybelec ModEva 10S, 2D – Graphic control • Upper tool clamping, Trumpf/Wila, hydraulic • Lower tool clamping, Trumpf system, hydraulic • CNC-controlled crowning • Safety light curtain, Lazersafe • 2 CNC bending aids incl. parking position • Pneumatic die shifting • LCB angle measuring system (2 x front, 2 x rear) • Foot switch Upper tools Trumpf OW203/S 60° R4 H220 130t/m, segmented, approx. 6000mm Trumpf OW203/S 60° R8 H220 130t/m, segmented, approx. 3050mm Trumpf OW300/S 86° R1 H300 80t/m, segmented, approx. 1380mm Trumpf OW210/S 28° R1 H240 40t/m, segmented, approx. 4060mm Trumpf OW200/S 86° R4 H218 80t/m, segmented, approx. 2700mm Lower tools Trumpf EV-W003, 30° R1.0 H100 70t/m, segmented, approx. 1500mm V10 Trumpf EV-W016, 50° R1.6 H150 50t/m, segmented, approx. 4100mm V16 Trumpf EV-W020, 84° R2.0 H100 70t/m, segmented, approx. 3650mm V20 Trumpf EV-W024, 80° R2.5 H100 70t/m, segmented, approx. 3050mm V24 Trumpf EV-W030, 80° R5.0 H100 80t/m, segmented, approx. 6000mm V30 Trumpf EV-W030, 30° R3.0 H100 90t/m, segmented, approx. 3050mm V30 Trumpf EV-W040, 80° R5.0 H100 120t/m, segmented, approx. 4570mm V40 Trumpf EV-W040, 30° R5.0 H100 90t/m, segmented, approx. 3050mm V40 Trumpf EV-W050, 80° R5.0 H100 150t/m, segmented, approx. 1000mm V50 Trumpf EV-W060, 80° R5.0 H100 150t/m, segmented, approx. 4560mm V60 Trumpf EV-W080, 80° R05 H100 150t/m, segmented, approx. 4550mm V80 Trumpf EV-W160, 80° R15 H150 200t/m, segmented, approx. 4000mm V160 Trumpf FWZ H100 120t/m, segmented, approx. 4500mm All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Fpedpeyh Hg Nofx Aatjl Multifix quick-change toolpost with tool holders Documentation and accessories Machine is powered up and available for inspection

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm Fpsdpfey R A Apjx Aatel manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Jung JF 520 D year of manufacture 1988 magnet 500 x 175 mm max. grinding area 600 x 220 mm variable speed variable magnetic field strength Fsdpjzba Ngefx Aatjpl automatic start diaform coolant/filter tank 3 x flange 1 x clamp documentation machine is powered on for inspection

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm Fedpfxszgu Ige Aatopl linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection