Used Battery Storage System for sale (47,497)

Condition: used, maximum load weight: 23,470 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2024, loading space width: 2,480 mm, loading space height: 3,170 mm, total length: 14,330 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, WIESE SA 3-36-GT / 3-Axle Mega Step-Frame Trailer / Forklift Transporter / 25t Loading Ramp For sale: a WIESE 3-axle Mega step-frame trailer in a special design, configured as a forklift transporter with a hydraulic heavy-duty loading ramp. Type SA 3-36-GT. ----Weights / Dimensions * Permissible total weight: 36,000 kg * Technical saddle load: 12,000 kg * Axle load: 24,000 kg * Tare weight: approx. 11,500 kg, depending on equipment ± 5% * Coupling height: approx. 960 mm * Overall height: approx. 4,000 mm * Loading height, low bed: approx. 800 mm * Loading height, high bed: approx. 1,150 mm * Internal height, high bed: approx. 2,820 mm * Internal height, low bed: approx. 3,170 mm * High bed length: approx. 4,000 mm * Low bed length: approx. 9,600 mm * Internal width: approx. 2,480 mm * External width: approx. 2,550 mm ----Chassis / Axles * Weight-optimized steel welded construction * Volume / Mega design * Hole frame with lashing points * Rear area reinforced for heavy-duty ramp * 3 SAF single axles in wide-track design * Air suspension with lifting/lowering * 1st axle as an automatic lift axle * 3rd axle as a friction-guided trailing steering axle, lockable * Tires: 12-ply 205/65 R17.5 on steel rims ----Load securing Kedpfjzvtpnjx Ahhsdr * Hole frame with lashing possibilities approx. every 250 mm * 4 pairs of 8-t lashing rings on the upper platform * 10 pairs of 8-t lashing rings in the low bed * Multi-X lashing rail in the center of the loading area ----Braking system * EBS from Wabco * Two-line pneumatic braking system * Spring-loaded parking brake * Axle load display via Wabco Smart Board * Display of the axle load in the cab of the corresponding tractor unit ----Floor / Superstructure * High bed with 30 mm sieve-print floor * Low bed with 40 mm sieve-print floor * Steel / checkered plate above the axle assembly * Curtainsider with lateral sliding tarpaulins * Sliding tarp Edscha Profi * 3 rows of aluminum insertion slats * Front wall over the full height ----Heavy-duty loading ramp * Type WFB 25 S * Load capacity: 25,000 kg * Platform length: approx. 5,820 mm * Electro-hydraulic drive * 2-part steel platform * Galvanized heavy-duty grating * Angle reduction for a flatter loading angle * Radio remote control * Additional operation on the control block * Emergency operation via hand pump * 2 hydraulic rear supports * 24-V power supply via NATO connector to the tractor unit ----Special equipment * Bilateral lifting roof, Liftmaster system, lifting height approx. 400 mm * Hydraulically extendable rear portal for maximum passage width * Extended tarpaulins for over-height transport * Separate aluminum loading ramp for accessing the fifth wheel * Work spotlights inside * Reversing lights * RSAB ICE Protect * Ferry lashings * Spare wheel holder * Various storage boxes and strap holders ----Other * Ramp hot-dip galvanized * Outer frame spray-galvanized and painted * TÜV inspection (German technical inspection) * Commissioning protocol Ideal for the transport of forklifts, machines and heavy vehicles. Thanks to the 25-ton loading ramp, the low bed, the lifting roof and the hydraulically extendable rear portal, it is particularly flexible for demanding transport tasks. We are happy to provide you with further information.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Original META MULTIPAL S (MULTIPAL-S) pallet racking system / heavy-duty shelving for warehouses, industry, and logistics. With a height of 3.80 m, it is also ideal as a high-bay racking system. 9 frames – 40 crossbeams – Original META MULTIPAL – in top condition The system was used exclusively for storing musical instruments and accessories. As a result, it was only subjected to very low loads. It was well maintained and is overall in exceptionally good condition. The few minor signs of wear do not affect stability or function. The manufacturer, META, has confirmed based on the profile marking and the photos that this is an original META MULTIPAL racking system. Scope of delivery • 9 × frames, height 3,800 mm • 40 × original META crossbeams • Field width: 3,600 mm • Shelf depth: 800 mm The racking system can be flexibly adapted to different storage requirements. Availability: immediately. Collection by prior appointment. Self-collection: The racking system will be completely dismantled by us and made ready for collection. The buyer is only responsible for loading and transport. There is a level truck access directly to the warehouse, which allows for easy loading. An inspection is possible at any time by prior appointment. Kdsdpfx Ahozmu Rujhsr Location: 45731 Waltrop Price: €3,990.00 net, negotiable, plus 19% VAT. An invoice with VAT will be issued. Type ID: 757 Type: MULTIPAL-S shelving If you have any questions or need more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: Ksdpfxey Tlc Do Ahhedr - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Condition: excellent (used), Year of construction: 2020, operating hours: 1,470 h, functionality: fully functional, fuel type: electric, color: grey, CLEANsweep CS 5110 EH / Stolzenberg Twin Top TT 1100 / E – Ride-on sweeper-vacuum cleaner CLEANsweep CS 5110 EH / Stolzenberg Twin Top TT 1100 / E – Year of manufacture 2020 | approx. 1,470 operating hours | Gel batteries | new side and main sweeping rollers | new drive chains | high-dumping system | adjustable speed of side brushes | solid rubber tires | incl. charger | sweeping width 1100 mm | Tandem roller system TWS | 4.5 h runtime | 1320 W drive Technical data: Manufacturer: CLEANsweep Model: CS 5110 EH Condition: very good Year of manufacture: 2020 Kdedezrzgmopfx Ahher Operating hours: approx. 1,470 h Sweeping roller width: 700 mm Total sweeping width: 1100 mm Tandem roller system: TWS Turning radius: 1.2 m Drive: forward & reverse / differential rear-wheel drive Dirt container: 90 L Filter cleaning: electric Cleaning area: up to 12,000 m² Sweeping performance: 6,600 m²/h Climbing ability: 20 % Runtime: 4.5 h Drive: 1320 W / 4x 6 V 180 Ah battery Charger: included Dust extraction: 900 m³/h Material: impact-resistant PE plastic Equipment: Gel batteries, new side and main sweeping rollers, new drive chains | high-dumping system | adjustable speed of side brushes | solid rubber tires | incl. charger Highlights & Equipment: - Professional sweeper-vacuum cleaner – ready for immediate use - Gel batteries, new side and main sweeping rollers, new drive chains, high-dumping system, adjustable speed of side brushes, solid rubber tires - Tandem roller system (TWS) – excellent cleaning performance, even with fine dust & sand - Working width 1100 mm – high area performance up to 6,600 m²/h - Electric filter cleaning – consistently high suction power - Robust PE housing – impact-resistant & durable - Ideal for indoor & outdoor use – versatile - Very well-maintained condition – immediately available Areas of application: ✓ Industrial halls & storage areas ✓ Car parks & underground garages ✓ Workshops & manufacturing ✓ Outdoor cleaning of areas & paths ✓ Agriculture & municipal services Location: Warehouse D-46514 Schermbeck (NRW) – inspection & collection possible Delivery: throughout Germany & internationally on request Price: ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models available! ➡️ New & used machines, accessories & spare parts Buy CLEANsweep CS 5110 EH | Electric ride-on sweeper | Used sweeper-vacuum cleaner | Industrial sweeper | Ride-on sweeper for indoor & outdoor use | Battery-powered sweeper | Stolzenberg Twin Top | Sweeper-vacuum cleaner for warehouses | Cleaning machine 1100 mm | Ride-on sweeper with high-dumping system | Electric industrial sweeper Your reliable partner for cleaning technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available machines! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: like new (used), For industrial use, tumbler loading systems are commonly utilized across various industries such as the food industry (especially bakery and meat processing), pharmaceutical industry, chemical industry, and others where precise mixing, rotation, or material processing is required. These machines offer high capacity, accuracy, and safety within automated production lines. High Capacity Adjustability Automatic Loading and Unloading Systems Temperature and Humidity Control Ksdpszbk R Ijfx Ahhsdr Drive System Materials and Construction Safety Systems Integration with Automated Systems Adaptability and Flexibility Energy Efficiency

Condition: like new (used), Year of construction: 2013, operating hours: 34 h, load capacity: 1,800 kg, fuel type: electric, Manufacturer + model: LINDE T 18 * EX * Pyroban - 3G / Zone 2 - RAVAS system ID: 24032.0261 Category: Demo Kedpfx Ahezutznehsdr Forks: 1150 x 685 mm Capacity: 1800 kg Year: 2014 Operating hours: 34 hours Battery: Complete NEW * 24v / 230Ah * Year 2025 Options: * EX * Atex - Pyroban!!!! System = S6000 E Gas group = IIB Type = 3G (approved for ZONE 2) Temperature class = T3 Equipped with RAVAS system

Condition: used, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: Logicontrol, with colour Touchscreen display Serial No.: 14001666/001 Year of construction: 2014 Load per tray: Medium X Typ2: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 6050 mm (Kardex height is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid subject to the system being unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Typ2: 460 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 x 6050 mm - Footprint of the system approx.: 10.39 m2 - Capacity with 32 trays: approx. 84 m2; each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Logicontrol, with colour Touchscreen display - LED anti-glare lighting above the access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking Kdjdezuvxvspfx Ahher Price: upon request, only via email Price: excl. VAT, including transport, installation and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades in and stocks mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for current stock. We install and/or disassemble these systems in a safe manner with VCA-certified technicians, and we have been doing so for over 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, Exenso Comfort – Length stop - Exenso positioning control with storage function - Network-compatible Windows operating system - 15” touchscreen control panel - Data import: CSV file (order list) - TeamViewer installed for remote diagnostics & service Automatic mode: Processing of cutting lists Connection options for barcode scanner and label printer Software: Optimization of material consumption, feedback to industry software, and more GMF radio measuring rod: Direct determination of actual dimensions TECHNICAL DATA: Adjustable lengths: Standard: 2,600 mm / 3,600 mm / 4,600 mm / 6,000 mm (special lengths on request) Accuracy: ± 0.2 mm / 3,000 mm Working height: approx. 910 mm + max. 50 mm Mounting side: right or left Kdjdezr Ufvjpfx Ahhor Operating system: Windows with HECHT Exenso software Power connection: 230 V

Condition: ready for operation (used), Kardex Shuttle XP systems in stock: - 1 x Kardex Shuttle XP 250, height: 3950 mm - 2 x Kardex paternoster, height: 4000 mm - 1 x Kardex Shuttle XP 250, height: 5050 mm - 1 x Kardex Shuttle XP 500, height: 5980 mm - 1 x Kardex Shuttle XP 500, height: 6050 mm - 1 x Kardex Shuttle XP 250, height: 6450 mm - 1 x Kardex Shuttle XP 250, height: 6950 mm - 1 x Kardex Shuttle XP 500, height: 7050 mm - 14 x Kardex Shuttle XP 500, height: 8550 mm - 3 x Kardex Shuttle XP 500, height: 9350 mm Kodpowgz Rdsfx Ahhedr Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift systems (Shuttle systems) and rotating storage systems (paternoster systems). See our website for the current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing this for more than 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, and Denocard.

Condition: like new (used), Year of construction: 2021, operating hours: 1,629 h, load capacity: 1,400 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,560 mm, Manufacturer + model: LINDE R 14 - * EX * Pyroban 3G / Zone 2 Mast: 3F6250 ID: 25085.9672 Category: Used Mast: 3F6250 Lowered height: 2560 mm Lifting height: 6250 mm Capacity: 1400 kg Year: 2021 Operating hours: 1629 hours Battery: COMPLETELY NEW * 48v/625ah * Year 2025 Options: * EX * Atex - Pyroban !!!! System = S6000 E Gas group = IIB Type = 3G (approved for ZONE 2) Temperature class = T3 (-20°C < Ta < +30°C) Equipped with: Kedpfx Aszutv Sohhsdr - Blue spot - Joystick control forward / reverse - Flashing beacon First original paint! Completely LIKE NEW!!

Condition: like new (used), Year of construction: 2018, operating hours: 783 h, load capacity: 1,600 kg, lifting height: 2,850 mm, fuel type: electric, construction height: 1,860 mm, Manufacturer + model: HYSTER S 1.6 * EX * Miretti - 2G / Zone 1 * Mast: 2F2800 ID: 26060.5191 Category: Demo Mast: 2F2850 Lowered height: 1860 mm Lifting height: 2850 mm Capacity: 1600 kg Initial lift: Yes Year: 2018 Operating hours: 783 hours Kdsdpszutxmsfx Ahher Battery: Completely NEW * 24V / 315Ah * Built 02/2026 Options: * EX * MIRETTI - E9799 System / Certificate = TUV 04 ATEX 2593 Gas group = IIB Type = Cat. 2G (approved for ZONE 1 and 2) Temperature class = T4

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, 2 stories with stairs, 2 large and one small room – used: Price ex works: €19,500 (net), disassembled, packaged, and loaded! Item 1: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Height: almost 6m Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length: approx. 21.40m, the "gap" for the passage is approx. 4.40m long Kdjdjzqz D Aopfx Ahhjr Depth: approx. 4.24m Ground floor height: approx. 2.86m All offices are closed on three sides and therefore have one side against the hall wall Without flooring Condition: good Available: from approximately Q4/2026 Location: Hamburg

Condition: used, Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, the following is included: - Hardening furnace (vacuum oil quenching furnace) - Control cabinet for hardening furnace - Internal water tank with pump units and control box - Control box for water cooling - Internal nitrogen pressure vessel - External platform for cooling unit + connection points for nitrogen batteries (nitrogen battery containers not included, must be rented) - 7 hardening baskets - Red transport and loading trolley - Parts washing tank for complete baskets with compressed air and drip tray -> System has approx. 6,000 operating hours Kdedjwlvhhjpfx Ahher -> The pictures are up-to-date, only the date on the images is not correct

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Kdsdjzkucfjpfx Ahhjr Inspection and testing possible by appointment. Errors and prior sale excepted.

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Kodpfezb N T Uox Ahhedr Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: nbh 170R Year of manufacture: 2005 The machine can be inspected under power by prior appointment. Kodjzviaijpfx Ahhsdr Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 1.000/800/800 mm - Workpiece swivel range within the working area: Ø 900 mm - Distance from table centre to spindle nose in Z: 138.9 (HSK-A 100) mm Position measurement system - Encoder scales: direct (measurement method) - Position uncertainty A according to DIN ISO 230-2: 0.007 mm 180-degree pallet changer with 4 x 90-degree pallet rotators Pallet - Pallet clamping surface to DIN 55201, Form A2: 500 x 630 mm - Transport load per pallet: approx. 0,8 tons - Height of the system: 1.100 mm NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Repeatability: ± 0,001 degrees - Accuracy across all positions: ± 0,002 degrees - Permissible torques on the clamped table: * Tangential torque: max. 7.000 Nm * Tilting moment: max. 16.000 Nm - Clamping forces: * on the table: 147.000 Nm * on the pallet: 84.600 Nm Working spindle / gear head - Tool holder to ISO 12164 (DIN 69893): HSK-A 100 - Diameter at front bearing: 100 mm - Drive power 100% duty cycle/60% duty cycle: 37/46 kW - Speed range: 25 – 10.000 rpm Feed / Feed force / Rapid traverse: - Feed range X/Y/Z axes: 1 – 60.000 mm/min - Feed force on X/Y/Z axes, 25% duty cycle: approx. 15.000 N - Rapid traverse speed, X/Y/Z axes: 60 m/min - Rapid traverse, rotary table: 30 rpm - Acceleration: approx. 6 m/s² - Ball screw (pitch): Ø 50 (30) mm Tool magazine for 4 magazine cassettes, including two additional magazine cassettes. Electrical - Rated power: 74 kVA Compressed air Coolant system, make: KNOLL The internal coolant supply can be switched to compressed air. - Coolant pump 20–70 bar - Coolant tank, 2.500 l Machine layout - Space requirements, L x W x H: approx. 8 x 3.5 x 3.5 m - Weight: approx. 24 tons ACCESSORIES / EQUIPMENT: - Control system: Siemens SINUMERIK 840D ADDITIONAL EQUIPMENT FOR AUTOMATED MANUFACTURING PALLET STORAGE SYSTEM Technical data sheet with full details, including information on the wide range of features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: used, Year of construction: 2018, total height: 8,950 mm, Automated warehouse optimization storage system KARDEX Shuttle XP250 System Type: SHUTTLE-XP-250-3050x864 Control: Logicontrol, with color touchscreen display Serial No.: 18001465/001 Year of construction: 2018 Load per tray: Medium: 205 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 8950 mm (height of Kardex is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum tray capacity: 32 trays, Medium: 205 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 x 8950 mm - Footprint of the system approx: 10.39 m2 - Capacity with 32 trays: approx. 84 m2; each tray is approx. 2.64 m2 - Electronic volume measuring system with 25 mm grid - An access opening with sliding doors to protect people and stored goods - Logicontrol, with color touchscreen display - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking Price: upon request, via email only Price: excl. VAT, including transport, installation, and warranty Delivery time: in stock Machinehandel De Leeuw BV is one of the few companies in Europe that deals with and has in stock primarily used Kardex Remstar VLM automatic lift & rotating warehouse systems. See our website for current stock. We safely install and/or dismantle these systems with VCA-certified technicians, and we have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7-B Kdedpfszuvq Esx Ahhsr 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Year of construction: 2004, functionality: fully functional, OBJECT DESCRIPTION: Location: K.Park Passau – Warehouse, Medienstraße 12, 94036 Passau Manufacturer: Fritz Schäfer GmbH, Fritz-Schäfer-Straße 20, 57290 Neunkirchen-Salchendorf Seller: Karl Bau GmbH, Industriestr. 5a, 94491 Hengersberg Year of construction: 1992/2004 Type of system: Two-story storage platform / steel platform construction Dimensions: Steel platform system 1: 29.40 x 50.00 x 5.24 m Steel platform system 2: 45.00 x 45.00 x 5.24 m Number of levels: 2 (1st floor + 2nd floor) Area per level: Steel platform system 1: 1470.00 m² Steel platform system 2: 2025.00 m² Total area: approx. 6990.00 m² Construction material: Galvanized steel beams with overlaid wooden panels Staircases: Galvanized steel stringers with galvanized steps Elevator: Goods elevator, load capacity 500 kg TECHNICAL DATA: Footprint: approx. 3495.00 m² (1470.00 + 2025.00 m²) Load capacity: Kodpfjzr E R Nsx Ahhodr 250 kg/m² Floor height: 2.60 m - Ground floor 3.00 m - 1st floor Total building height: 5.60 m

Condition: like new (used), Year of construction: 2010, operating hours: 7,177 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 PL - 386 * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25011.5978 Cat.: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2010 Hours: 7177 hours Battery: Complete NEW * 48v/625ah * year 2025 Options: CONTAINER specs!! * EX * Proplan!!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat. 2G (approved for ZONE 1 and 2) Temp. class = T4 Equipped with: - Complete road lighting - Additional spotlights - Flashing beacon - Joystick control forward/reverse - 2D - FFL mast Kjdszutvfspfx Ahhsdr - New tyres (ATEX specs)

Condition: like new (used), Year of construction: 2011, operating hours: 6,313 h, load capacity: 1,400 kg, lifting height: 8,400 mm, fuel type: electric, mast type: triplex, construction height: 3,520 mm, Manufacturer + model: BT RRE 140 * EX * Miretti 2G / Zone 1 Mast: 3F8400 ID: 25013.7057 Category: Used Mast: 3F8400 Lowered height: 3520 mm Lifting height: 8400 mm Capacity: 1400 kg Year: 2011 Hours: 6313 hours Battery: Completely NEW * 48v/560ah * Year 2026 Options: * EX * MIRETTI !!!!! System = CEC 15 ATEX 161 Ref = E7207 Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temp. class = T2 Gb Ksdpfxezutvxj Ahhsdr

Condition: refurbished (used), Year of construction: 2020, Our mobile winder, is one of our demonstration machines, condition good, slight scratches on the housing and on the chassis, Warranty 12 months, completely checked and serviced. On request with optional accessories such as a wide feeler strap. Warranty: 12 months (single-shift operation), The advantages at a glance: - Working area of only 750 mm around the pallet - Extremely compact design - Patented steering system - Compared to its competitors, it takes up to 40% less space - Easiest handling - German support - Upgrades are also optionally available later The LEO only needs 75cm (about a shoulder width) around the pallet to be wrapped. WORKSPACE Pallet size: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / without limit Width: min. 600 mm / without limit Machine dimension: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (optionally also lower possible) FILM DATA Wrapping programs: - Foot and head wrapping - Cross and one-way winding - with stop for cover sheet support Film width max. 500 mm Core diameter max. 76 mm Outside diameter max. 220 mm MACHINE DATA Tension: - Battery: 2x 12 volts - Charger integrated 220 volts - Drive: 2x 24 volts Kdjdpfx Ahewtt D Ajher - Foil slide: 1x 24 volts Foil carriage: - own parameters for up and down movement - Mechanical film brake - stepless adjustment Control: - Touch panel with digital display - Speed dial buttons - Drawbar with navigation buttons - Pallet detection via tactile belt - Emergency switch - 6 storable working modes - Double collision protection Mast: Stationary construction Weight: 195 kg CE marked machine the wrapping of black products or the use of black stretch film. and can be charged with any cable with a Euro mains plug at a 230V household socket. Such a charging cable is of course part of the scope of delivery.

Year of construction: 2019, condition: ready for operation (used), A complete automation system for handling machining center products is available. 1) Full protection cabin with safety door. 2) 6-axis robot Kuka KR 120 R 3200 PA with gripper adapter. 3) 6-axis robot Kuka KR 120 R 3500 with gripper adapter. 4) 2x 6-axis robots Kuka KR 10 R 1420 with gripper. 5) Handling unit with 2 robots. 6) Reference chamber. 7) Marking station with extraction, cleaning station, and assembly unit for 2 lanes. 8) 2x adhesive application stations. 9) 2x screwing stations. 10) Drawer system with part inserts. 11) Pallet storage area. The transfer stations and removal/handling grippers are designed for specific parts. Documentation available. An on-site inspection is possible. Kdedjxaph Iepfx Ahher

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed description For sale: complete aisle Automated Storage and Retrieval System (AS/RS) (Knapp) Ideal lot for integrators and logistics companies wishing to enhance their automated storage capacity. Sold as is, complete lot ready for installation. Less than 100 hours of service! Lot contents: • 10 OSR units (Knapp shuttles) – shuttles for automatic storage and handling • 2 lifts (for connecting levels) • Infeed and outfeed conveyors included (for easy integration into the existing flow) Kjdpfextfa Hex Ahhsdr • 2,200 SILVERLINE plastic containers, European standard (or equivalent) + dividers included • Ladders, rails, and crossbars for racking (structural elements for storage) • Protective mesh (production) • No picking stations included Condition: equipment very little used. Inspected and functional. Sold as is. Numerous spare parts available! Delivery and installation possible, please contact us! No control system service or installation (software) provided. Advantages: • High automated storage capacity (2,200 containers) • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to facilitate flow integration Price: €340,000.00 excluding VAT (complete lot). ⚠️ Important: ISC Recycle only handles the sale of the equipment. Integration available upon request.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Dual pallet changer Spindle cooling Oil cleaner Chip conveyor Cooljet Systems oil cooler Kedeztpixjpfx Ahhjdr Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.

Condition: used, Year of construction: 1998, Velcorin dosing system for the cold sterilisation of beverages during bottling. Velcorin is drawn from a storage tank and injected into the product stream via a dosing pump. System out of service. Ideal as a source of spare parts. Additional title: Cold sterilizing Capacity: 7200 l/h Maximum permissible dosing rate: 20 ml/hl Features: Velcorin storage tank; compressed air connection; dosing pump (Cibus 32 lubricant); flow/volume measurement module; pneumatic control block; centrifugal fan; control panel with buttons and warning lights; various valves, actuators and sensors Kdodpfx Ahjzty S Djhjr