Used Baumann Egx50/14/75Tr - Traverse for sale (13,057)

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Rear doors, Smooth exterior walls Equipment: - 40mm insulated wall - +2° C to +10° C - GOVI 1600N Net: €8,025.21 / Gross: €9,550.00 Item number: UC6113251319.01 Technical data: • Brand: Unsinn • Model: UKT 6C 2513-13-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 250 x 135 x 190 cm • External dimensions (LxWxH): 391 x 192 x 248 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,300 kg • Unladen weight: 625 kg • Payload: 675 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic Fodpfxezy Dwqo Aptsgg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid aluminum chassis for safe driving characteristics • Loading area made of multi-layer glued screen-printed plywood, 18 mm • 4 stable telescopic crank supports for up to 6000 kg standing weight • Thermo-sandwich construction • Interior and exterior skin made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 40 mm PU core • Exterior color silver RAL 9006 • Rear door, double-wing with aluminum hinges • Refrigeration unit toggle fastener and stainless steel door latch • Rear frame and trim profiles made of special aluminum profiles, anodized for aesthetically pleasing appearance • Impact protection 200 mm at the bottom, all around • Refrigeration unit Arktik 1600 N • Cooling capacity 1800 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Fully encapsulated unit with "outdoor" housing mounted on the front at the top • Environmentally friendly, CFC-free refrigerant • Electronic defrosting system for the evaporator • The control display is lockable and therefore protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • 230-volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse drive automatic • Plastic mudguards • 13-pole plug • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load-bearing capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Max. swing over bed: 615mm, max. swing over cross slide: 345mm, distance between centers: 3000mm, spindle bore: 70mm, spindle taper: MT5, forward speed steps: 18, forward speed range: 14-750rpm, reverse speed steps: 9, reverse speed range: 21-857rpm, standard longitudinal feed: 32 steps, 0.1-1.42mm/rev, standard cross feed: 32 steps, 0.03-0.46mm/rev, fine longitudinal feed: 8 steps, 0.048-0.089mm/rev, fine cross feed: 8 steps, 0.015-0.028mm/rev, coarse longitudinal feed: 32 steps, 1.52-2.28mm/rev, coarse cross feed: 32 steps, 0.48-7.2mm/rev, rapid traverse longitudinal: 6m/min, rapid traverse cross: 2m/min, metric threads: 54, range: 1-240mm, Whitworth threads: 37, range: 1-28threads/inch, compound slide travel: 230mm, cross slide travel: 400mm, distance from spindle center to tool holder: 32mm, tool dimensions: 30x30mm, tailstock quill diameter: 100mm, tailstock taper: MT5, quill travel: 205mm, bed width: 490mm, main motor power: 11kW at 1450rpm, rapid traverse motor power: 0.12kW at 1450rpm, coolant motor power: 0.09kW, coolant delivery rate: 25l/min, length: 5500mm, width: 1500mm, height: 1300mm, weight: 4.7t, with documentation. An on-site inspection is possible. Fgedpfozzqbfsx Aptog

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, smooth exterior walls Equipment: -+2° C to +10° C -GOVI 1600N -40mm insulated wall Net price: €9,151.26 / Gross price: €10,890.00 Fodpfx Apjzy A Ihstsgg Article number: UC6226301519.01 Technical data: • Brand: Unsinn • Model: UKT 6C 3015-26-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 300 x 150 x 190 cm • Exterior dimensions (L x W x H): 441 x 207 x 251 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,600 kg • Tare weight: 825 kg • Payload: 1,775 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant aluminum chassis for safe driving characteristics • Loading area made of multi-layered glued screen printing board, 18 mm • 4 stable telescopic crank supports for up to 6000 kg standing weight • Thermo-sandwich body • Interior and exterior shell made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 40 mm PU core • Exterior color silver RAL 9006 • Rear door double-wing with aluminum hinges • Refrigerated compartment pressure lever lock and stainless steel door latch • Rear frame and edge profiles made of special aluminum profiles, anodized for aesthetically pleasing design • Impact protection 200 mm at the bottom, wraps around 3 sides • Refrigeration unit Arktik 1600 N • Cooling capacity 1800 watts at a refrigerated room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Completely encapsulated unit with "outdoor" housing, mounted on the front side at the top • Environmentally friendly, CFC-free refrigerant • Electronic automatic defrost of the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • 230 volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Automatic reversing function • Plastic mudguards • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific wishes! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: good (used), Stacker Baumann BA3 N Transomat The machine is ready to use. This is the most popular design from the German manufacturer. The Transomat can be placed on the left side of the guillotine. The set includes a safety fence and a work area cover. Weight: 1600 kg Fsdpszw T Akofx Aptjgg Power supply: 400 V Control panel. Air table. Chrome table surface

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 179056920, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance spindle nose to tailstock origin: 639 mm - X1/X2 axis stroke (effective travel): 335/289 mm / Rapid traverse X: 30 m/min - Z1/Z2 axis stroke: 560/494 mm / Rapid traverse Z: 30 m/min - Standard fully enclosed cabin with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface according to DIN 55026: Size A6 - Max. spindle speed: 4,500 rpm - Spindle power at 100%/40% duty cycle: 23/18 kW - Spindle torque at 100%/40% duty cycle: 146/115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Tool Turret with Driven Tools - Tool mounts cylindrical shank to DIN 69880: 8 × VDI 40 - Max. tool length: 130 mm - Number of stations: 8 - Max. turret speed: 4,500 rpm - Max. torque at 10% duty cycle: 27 Nm; at 100%: 14 Nm Turret Configuration X2/Z2: Tool Holder with Driven Tools - X-HOT unit for polygon turning, max. eccentricity (stroke): 8 mm Fodsxwmf Sspfx Aptjgg - X-HOT tool holder interface: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length 3,000 mm (6,477 mm with chip conveyor), Width 3,000 mm, Height 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design: Optimum chip disposal, manual or automatic loading/unloading - Control: Siemens 840D for NC1 and NC2 - High precision: Positioning accuracy X/Z axes ±0.002 mm (Heidenhain absolute linear scales) - Powerful main spindle with wide speed range - Driven tools expand application range to include drilling and milling - Tool life monitoring - Chip conveyor coolant: Knoll - Coolant filtration unit up to 40 bar: Knoll FKA/1400 - Part detection system with low air pressure sensor - AUTOMATION INFRASTRUCTURE FOR ROBOT INSTALLED - Fully enclosed work area, work light included - Documentation: Available electronically and as printed manual Machine status: In working condition.

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 179057653, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 axes travel (working stroke): 335/289 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axes travel: 560/494 mm / Rapid traverse in Z: 30 m/min - Fully enclosed with automatic door opening, supporting manual or automatic loading Main Spindle - Spindle according to DIN 55026: Size A6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 23 / 18 kW - Torque at 100% / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Toolholder with Powered Tools - Cylindrical shank holders per DIN 69880: 8 - VDI40 - Max. tool length: 130 mm - Number of positions: 1 x 8 - Max. speed: 4,500 rpm - Max. torque at 10% / 100% duty cycle: 27 Nm / 14 Nm Turret Configuration X2/Z2: Toolholder with Powered Tools - X-HOT unit for polygonal turning, max. eccentricity (stroke): 8 mm - X-HOT tool clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3,000 mm (6,477 mm with chip conveyor), Width = 3,000 mm, Height = 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design for optimum chip removal, suitable for manual or automated loading/unloading - Siemens 840D control, NC1 and NC2 axes Fgedpfxsxxinfe Aptjg - High precision: Positioning accuracy in X, Z axes ±0.002 mm (Heidenhain linear scales) - Powerful main spindle with a wide speed range - Live tooling extends machining capabilities to drilling and milling - Tool life monitoring - Chip conveyor: Knoll - Coolant system filtration up to 40 bar: Knoll FKA/1400 - Workpiece presence detection with low pressure sensor - ROBOT AUTOMATION INFRASTRUCTURE INSTALLED - Fully enclosed work area; integrated lighting - Documentation: available both electronically and as hard copy Machine status: Not operational - Missing: valve for emulsion circuit and inductive sensors

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, Smooth exterior walls Equipment: -+2° C to +10° C -45mm insulated wall -GOVI 1600N Net: €10,075.63 / Gross: €11,990.00 Article number: UC6226361719.01 Technical data: • Brand: Unsinn • Model: UKT 6C 3617-26-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 360 x 170 x 190 cm • External dimensions (L x W x H): 542 x 229 x 253 cm • Loading height of the floor: 53 cm • Permissible total weight: 2,600 kg • Unladen weight: 860 kg Fgsdpfxszy Dpye Aptjg • Payload: 1,740 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid aluminum chassis for safe driving characteristics • Loading area made of multi-layered glued screen printing board, 18 mm • 4 stable telescopic crank supports for up to 6000kg standing weight • Thermo-sandwich construction • Inner and outer skin made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 45 mm PU core • Exterior color silver RAL 9006 • Rear door double-wing with aluminum hinges • Refrigerated room pressure lever lock and stainless steel door retainer • Rear frame and edge profiles made of special aluminum profiles anodized for aesthetically pleasing appearance • Impact protection 200 mm at the bottom, all around on 3 sides • Refrigeration unit Arctic 1600 N • Cooling capacity 1600 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Completely encapsulated unit with "outdoor" housing mounted at the front on top • Environmentally friendly, CFC-free refrigerant • Electronic evaporator defrosting system • The control display can be locked and is thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • 230 volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse automatic • Plastic fenders • 13-pole plug • Reversing light • Oversized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107786, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard closed automation (number of loading stations per workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle as per DIN 55026: Size A5 - Max. speed: 6000 rpm - Power at 100 / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100 / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Toolholders per DIN 69880: 12 × BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm; 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: Fgodpfxoxw Slkj Aptjg - Vertical construction: optimal chip evacuation and easy part loading/unloading - Control: GE Fanuc FS 32i B - High precision: positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: high power and wide speed range - In-process control: Marposs T25 measurement probe - Automated loading/unloading: integrated automation feeds and removes workpieces - Driven tools: enhances machining capabilities for drilling and milling - Tool life monitoring with sister tool management - Chip conveyor - Fully enclosed work area; workspace lighting - Documentation: Electronic available; physical manual incomplete Machine Condition: NOT WORKING - Operator panel touchscreen needs replacement - Hydraulic cylinder for loading door broken - Emulsion pump - Hydraulic pump - Spindle clamp/unclamp sensor - Hydraulic accumulator - Turret motor

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010521, Technical specifications: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading magazines by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum spindle speed: 4500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holder for cylindrical shank DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Max. tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Total machine dimensions: Length = 2680 mm (3820 mm with chip conveyor), Width = 2040 mm, Height = 2400 mm - Weight: 6500 kg Main Features and Capabilities - Vertical design: Enables optimal chip removal and easy loading/unloading - Control system: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X/Z axes is ±0.001 mm thanks to Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic version not available, printed manual incomplete Fjdpsxxt D Rsfx Aptjgg Machine status: NOT WORKING - Spindle drive - X-axis linear scale - Safety access door (Euchner) - Emulsion solenoid valves x2

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 179057784, Technical characteristics: Working Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 travel (working stroke): 335 / 289 mm - Rapid traverse in X: 30 m/min - Z1/Z2 travel: 560 / 494 mm - Rapid traverse in Z: 30 m/min - Standard enclosure with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface as per DIN 55026: Size A6 - Max. speed: 4500 rpm - Power at 100 / 40% duty cycle: 23 / 18 kW - Torque at 100 / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 Fodjxw R Rfspfx Aptogg - Clamping force: 850 daN - Clamping stroke: 200 mm Turret X1/Z1: Tool Carrier with Live Tools - Cylindrical tool holder interface as per DIN 69880: 8 x VDI40 - Max. tool length: 130 mm - Tool stations: 1 x 8 - Max. speed: 4500 rpm - Max. torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Turret X2/Z2: Tool Carrier with Live Tools - X-HOT unit for polygonal machining, max. eccentricity/stroke: 8 mm - X-HOT tool holder clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3000 mm (6477 mm with chip conveyor), Width = 3000 mm, Height = 3650 mm - Weight: 11,000 kg Main Features and Capabilities - Vertical design: Optimal chip removal, manual or automatic loading/unloading - Control: Siemens 840D, controls NC1 and NC2 - High precision: Positioning accuracy in X and Z axes ±0.002 mm (Heidenhain linear scales) - Main spindle: High power, wide speed range - Live tools: Allows drilling and milling operations - Tool life monitoring - Chip conveyor / Coolant: Knoll - Coolant filtration unit, max. 40 bar: Knoll FKA/1400 - Part presence detection system with low air pressure sensor - Automation infrastructure: Prepared for robot integration - Fully enclosed work area with working area lighting - Documentation: Electronic and hardcopy available Machine condition: Working only on X1/Z1 – X2/Z2 operational, but XHOT not available

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 103563, Technical characteristics: Work Area: • Maximum clamping plate diameter: 260 mm • Maximum turning diameter: 260 mm • Maximum machining diameter: 220 mm • Maximum workpiece length: 110 mm • X-axis travel distance: 570 mm / X-axis rapid traverse: 60 m/min • Z-axis travel distance: 200 mm / Z-axis rapid traverse: 30 m/min • Y-axis travel distance: 40 mm / Y-axis rapid traverse: 30 m/min • Standard integrated automation (number of loading pockets by workpiece diameter: 14/(80...200 mm), 18/(30...160 mm), 30/(30...85 mm)) Main Spindle: • Spindle interface according to DIN 55026: Size 6 • Maximum spindle speed: 4,500 rpm • Spindle power (100% / 40% duty cycle): 18 / 27 kW • Spindle torque (100% / 40% duty cycle): 202 / 303 Nm Tool Turret with Live Tools: Fedpfxsxvyk Eo Aptsgg • Tool holders per DIN 69880: VDI40, 12 positions • Number of tool stations: 12 • Maximum tool length (including holder): 190 mm • Maximum speed (live tooling): 6,000 rpm • Maximum torque (duty cycle: 10% / 25% / 100%): 37 / 26 / 14 Nm Electrical Equipment: • Operating voltage: 400 - 480 V • Connected load: 42 kW Dimensions: • Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm • Weight: 6,500 kg Main Features and Capabilities: • Vertical design for optimal chip disposal and easy loading/unloading • CNC control: Siemens Sinumerik 840D-sl • High precision: Positioning accuracy in X, Y, and Z axes ±0.001 mm with Heidenhain linear scales • Main spindle: High power and wide speed range • Automated loading/unloading: Parts are automatically loaded and removed via integrated automation • Live tooling: Enables drilling and milling operations in addition to turning • Chip conveyor Machine condition: NOT WORKING • Live tool drive motor removed from the machine • Main spindle defective – removed from the machine • Turret removed (coolant leaks through the turret's refrigeration circuit)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & Emergency hand pump, Full steel floor Equipment: - Charger - 6x Lashing points - Electric pump Net: €6,008.40 / Gross: €7,150.00 Article number: UDK230301811.01 Technical data: • Brand: Unsinn • Model: UDK 3017-30-14 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 306 x 175 x 35 cm • External dimensions (L x W x H): 450 x 191 x 113 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,000 kg • Unladen weight: 790 kg • Payload: 2,210 kg • Chassis: High loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics • Aluminum side panels anodized, double-walled • All side panels can be folded down and removed • Steel corner posts removable • Rear flap can also be pivoted • Option to attach at all 4 corners for tarpaulin frames, grid extensions, side panel extensions or front wall extensions • Stable toggle lever locks • Full steel floor, 3mm hot-dip galvanized – extremely robust • Drawbar and frame hollow profile construction welded and completely hot-dip galvanized Fgodozy A E Hopfx Aptsg • Many cross members, resulting in high point load capacity • All transverse and longitudinal members rest on the ground • 6 folding lashing points, mounted recessed in the floor frame profile (600DaN/kg) • 6 lashing points under the loading area • U-profile on the rear, for easier attachment of the ramps • Ramp compartment prepared • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box incl. cover • Emergency hand pump, for manual tilting in case of empty battery • Detachable remote control for E-hydraulics • Integrated battery charger with Schuko plug • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced, automatic support wheel, for safely parking the loaded trailer, load capacity 500kg • Premium maneuvering handle with ratchet strap reel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT. - Vehicle registration certificate can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: excellent (used), Year of construction: 2017, operating hours: 8,496 h, lifting height: 4,050 mm, fuel type: diesel, mast type: duplex, total height: 3,050 mm, total length: 5,200 mm, total width: 2,050 mm, color: other, Year of manufacture: Jun 2017 Empty weight: 11.280 kg Lifting capacity: 7.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Registration number: TKG-48-H General Country of production: Italy Condition CE type: CE Fgedsyr D Stepfx Aptsg Hydraulic fork positioner, Table width 1200 mm, Initial lift, Pneumatic tires

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107964, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 - BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions: Length = 4350 mm with chip conveyor, Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Enables optimal chip evacuation and easy loading/unloading. - CNC Control: GE Fanuc FS 32i B. - High Precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales. - Main Spindle: High power and wide speed range. - In-process Measurement: Equipped with Marposs T25 measuring probe. - Automated Loading/Unloading: Integrated automation for part loading and unloading. - Live Tooling: Capability for driven tools expands machining to drilling and milling operations. - Tool Life Monitoring: Sister tool management for tool life tracking. - Chip Conveyor - Fully Enclosed Work Area with Work Area Lighting - Documentation: Electronic available; hardcopy/incomplete book. Machine Status: NOT OPERATIONAL - Cooling pump x2 units - Live tool drive motor - Lubrication pump - Operator panel - touchscreen needs replacement - Hydraulic block valves x3 Fjdpfoxw Srksx Aptsgg - Hydraulic loading door cylinder - Rotary joint - Lubrication pressure switch - Safety door, Euchner type

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 106679, Technical Specifications: Work Area - Chuck diameter: 260 mm - Maximum weight: 150 kg - Swing diameter: 280 mm - Maximum workpiece diameter/height: 200/200 mm - X-axis stroke (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Y-axis stroke: ±30 mm / Rapid traverse in Y: 15 m/min / Feed force: 7.5 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading stations by workpiece diameter): 14 (80–200 mm), 18 (30–160 mm), 30 (30–85 mm) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Turret with Driven Tools - Toolholder interface according to DIN 69880: 12 positions – BMT65 - Number of stations: 12 - Maximum tool length (incl. holder): 200 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100%: 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 100 A - Connected load: 36 kVA Dimensions & Weight - Overall dimensions: Length = 5300 mm (incl. chip conveyor), Width = 2300 mm, Height = 3650 mm - Weight: 9,000 kg Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: GE Fanuc FS 32i B - High Precision: Positioning accuracy X/Z axes ±0.001 mm (Heidenhain linear scales) - Main Spindle: High power and broad speed range - In-Process Control: Marposs T25 measuring probe - Automated Loading/Unloading: Emag O-Type with integrated automation for feeding and removing parts - Live Tools: Supports drilling and milling operations - Tool Life Monitoring: Sister tool management - Chip conveyor & coolant filtration unit: Micronfilter with “paper filter,” 40 bar pumps (supports two machines) Fodjxw Smbjpfx Aptsgg - Fully enclosed work area, integrated lighting - Documentation: Electronic available, incomplete printed manual Machine Status: - In Operation

Condition: new, *AVAILABLE IMMEDIATELY* Includes: E & emergency hand pump, all-steel floor Features: - 8 lashing eyes - Electric pump - Battery charger Net: €7,134.45 / Gross: €8,490.00 Article number: UDK235361811.01 Technical data: • Brand: Unsinn • Model: UDK 3617-35-14 • Vehicle type: Three-way tipper • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 366 x 175 x 35 cm • External dimensions (LxWxH): 512 x 191 x 114 cm • Loading height of the floor: 79 cm • Permissible total weight: 3,500 kg • Unladen weight: 945 kg • Payload: 2,555 kg • Chassis: High loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics • Aluminum side panels, anodized, double-walled • All side panels foldable and removable • Steel corner posts removable • Rear flap can also be used as a swing-out flap • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side panel attachments or front panel extension • Stable toggle lever locks • All-steel floor, 3mm hot-dip galvanized – extremely robust • Drawbar and frame, hollow profile construction, welded together and completely hot-dip galvanized • Numerous crossmembers, allowing for high point loads • All transverse and longitudinal supports rest on the ground • 8 foldable lashing points, recessed and mounted in the floor frame profile (600 DaN/kg) • 8 lashing eyes under the loading area • U-profile on the rear, for easier attachment of the ramps • Ramp shaft prepared • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box incl. cover • Emergency hand pump for manual tilting in case of a discharged battery • Removable remote control for electric hydraulics • Integrated battery charger with Schuko plug • Maintenance-free rubber spring axles from ALKO • Automatic reversing system • ALKO overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced, automatic support wheel for secure parking of the loaded trailer, load capacity 500kg • Premium maneuvering handle with tie-down strap winder _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to ask about your desired modifications! Fgsdpozy Dkkjfx Apteg _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, Smooth exterior walls Equipment: - Lashing rails - 10x lashing points - Smooth GRP coating Net price: €7,058.82 / Gross price: €8,400.00 Article number: ULK226431819.02 Technical data: • Brand: Unsinn • Model: UKU 421719-26-14 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 2 years from first registration Fgsdpozy Anuefx Aptjg • Interior dimensions (LxWxH): 426 x 175 x 194 cm • Exterior dimensions (LxWxH): 569 x 227 x 252 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,600 kg • Unladen weight: 665 kg • Payload: 1,935 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant aluminum chassis for safe driving characteristics • Side walls made of Unique Panels, consisting of GRP-steel-sandwich, similar to white RAL 9016. Transparent roof for good visibility during loading • Loading area made of multiple-layer glued screen-printed plywood 18mm, non-slip and waterproof • Rear frame and edge profiles made of special aluminum profiles, anodized for attractive aesthetics • Tailgate with gas struts and non-slip surface • Twist lock and hinges galvanized • Reversing aid • ALKO overrun device and parking brake • Plastic mudguards • 13-pole connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 109239, Technical characteristics: Work Area # Chuck diameter: 260 mm # Maximum workpiece weight: 150 kg # Swing diameter: 280 mm # Maximum workpiece diameter/height: 200/200 mm # X-axis travel (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN # Z-axis travel: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN # Loading time: 5-6 sec # Standard enclosed automation (number of loading stations based on workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle # Spindle according to DIN 55026: Size 6 # Maximum speed: 4,500 rpm # Power at 100% / 40% duty cycle: 25 / 18 kW # Torque at 100% / 40% duty cycle: 280 / 200 Nm Turret with Driven Tools # Tool shank interface according to DIN 69880: 12 positions - BMT65 # Number of tool stations: 12 # Maximum tool length including holder: 200 mm Fgsdpfx Aexxir Deptsg # Maximum speed: 6,000 rpm # Maximum torque: 27 Nm at 10% duty cycle, 14 Nm at 100% duty cycle Electrical Equipment # Operating voltage: 400 - 480 V, 100 A # Connected load: 36 kVA Dimensions # Overall dimensions: Length = 5,300 mm (with chip conveyor), Width = 2,300 mm, Height = 3,650 mm # Machine weight: 9,000 kg Main Features and Capabilities: # Vertical design: Optimized for chip removal with easy loading/unloading. # CNC control: GE Fanuc FS 32i B. # High precision: Positioning accuracy in X, Z axes ±0.001 mm with Heidenhain linear scales. # Powerful main spindle: High power and broad speed range. # In-process control: Marposs T25 measuring probe. # Fully automated loading/unloading: Emag O-Type; workpieces are automatically loaded and unloaded via integrated automation. # Driven tools: Enables drilling and milling operations within the machine. # Tool life monitoring with sister tool management. # Chip conveyor and coolant filtration unit: Micron filter with paper filter, 40 bar pumps (suitable for filtering two machines). # Fully enclosed work area, internal work light. # Documentation: Electronic version available (book version incomplete). Machine status: OPERATING

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 109242, Technical specifications: Work Area - Chuck diameter: 260 mm - Maximum weight: 150 kg - Swing diameter: 280 mm - Max. workpiece diameter/height: 200/200 mm - X-axis stroke (effective travel): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN Fgedpjxxit Usfx Aptsg - Loading time: 5–6 sec - Standard closed automation (number of loading positions per workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Tool Turret with Driven Tools - Tool holder with cylindrical shank per DIN 69880: 12 positions - BMT65 - Number of tool stations: 12 - Max. tool length (incl. holder): 200 mm - Max. speed: 6,000 rpm - Max. torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Electrical System - Operating voltage: 400 – 480 V, 100 A - Connected load: 36 kVA Dimensions - Overall dimensions: Length = 5,300 mm (with chip conveyor), Width = 2,300 mm, Height = 3,650 mm - Weight: 9,000 kg Main Features and Capabilities: - Vertical design: Optimized for efficient chip removal and easy part loading/unloading - CNC control: GE Fanuc FS 32i B - High precision: Positioning accuracy (X/Z axes) ±0.001 mm; equipped with Heidenhain linear scales - Powerful main spindle: High output and large speed range - In-process measurement: Marposs T25 probing system - Fully automated loading/unloading: EMAG O-Type—parts are loaded and removed by integrated automation - Live tooling: Allows for drilling and milling operations beyond standard turning - Tool life monitoring with sister tool management - Chip conveyor and coolant filtration unit: Micron filter with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, illuminated for safe and easy operation - Documentation: Electronic documentation available (hard copy not complete) Machine status: Operational (in production)

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,150 mm, motor manufacturer: Perkins, Equipment: cabin, lighting, Side loader BAUMANN GX50/12/45 Year of manufacture: 2008 According to the meter: 16,681 operating hours Fgjdpfxeyua Txj Aptjg 5 ton lifting capacity 3.15 m overall height 4.50 m lifting height 60 cm free lift! Perkins engine Hydrostatic drive - Fork positioner - Separate fork lift - Cabin with heating - Lighting system - Pneumatic tyres - Immediately ready for use - Including Dutch road approval Sales price: €13,500 net Affordable delivery possible!

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, Smooth exterior walls Equipment: - 8 lashing points - Lashing rails - Smooth GRP coating Net: €6,294.12 / Gross: €7,490.00 Article number: ULK226371819.02 Technical data: • Brand: Unsinn • Model: UKU 361719-26-14 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 366 x 175 x 194 cm • External dimensions (LxWxH): 506 x 227 x 252 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,600 kg • Unladen weight: 640 kg • Payload: 1,960 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant aluminum chassis for safe driving characteristics • Side walls made of Unique Panels, consisting of GRP-steel-sandwich, similar to white RAL 9016 • Transparent roof for good visibility when loading • Loading area made of multi-layer glued screen-printed plywood 18mm, non-slip and waterproof • Rear frame and edge profiles made of special aluminum profiles, anodized for attractive aesthetics • Tailgate with gas springs and non-slip surface • Rotating bar lock and hinges galvanized • Reversing aid • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug Fgsdpfx Apezy Dlzeteg • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107965, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel path: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel path: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests in relation to part diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum rotational speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Tool shank as per DIN 69880: 12 positions - BMT65 - Number of positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total machine dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: Optimized chip removal and easy loading/unloading - CNC controller: GE Fanuc FS 32i B - High precision: Axis positioning accuracy in X, Z ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and wide speed range - Process control: Marposs T25 measuring probe - Automated loading/unloading: Parts are loaded and removed via integrated automation system - Live tooling: Enables drilling and milling operations in addition to turning - Tool life monitoring with sister tool management - Chip conveyor & coolant filtration system Knoll with paper filter and 40 bar pumps (capable of filtering 2 machines) - Fully enclosed work area; integrated work lighting - Documentation: Available electronically; hardcopy manuals incomplete Machine status: NOT WORKING - Live tool drive motor - Safety locking mechanism (Euchner) for loading door - Turret drive motor - Turret motor driver Fsdoxw Svispfx Aptjgg - Lubrication pump - Hydraulic manifold (4x electrovalves) - Lubrication pressure system - Rotary union - Hydraulic cylinder for loading door - Spindle clamping/unclamping sensor

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Fedjykt N Sspfx Aptegg Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 108113, Technical Characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse Z: 30 m/min - Standard automation with closed system (number of loading nests by workpiece diameter: 14/(80–200), 18/(30–160), 30/(30–85)) Main Spindle - Spindle interface per DIN 55026: Size A5 - Maximum spindle speed: 6000 rpm - Power (100% / 40% duty cycle): 18.1 / 13.9 kW - Torque (100% / 40% duty cycle): 77 / 59 Nm Tool Holder with Driven Tools - Tool shank per DIN 69880: 12 – BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque (10% duty cycle): 27 Nm; (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions (L x W x H): 4350 mm (with chip conveyor) x 1600 mm x 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Optimized for chip removal and easy loading/unloading - CNC Controller: GE Fanuc FS 32i B - High precision: Positioning accuracy in X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and broad speed range - In-process control: Marposs T25 measuring probe - Automated loading/unloading: Integrated automation for feeding and removing parts - Live tools: Capability for drilling and milling operations - Tool life monitoring and sister tool management - Chip conveyor & Knoll coolant filtration unit with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, with work area lighting - Documentation: Electronic version available, printed booklet incomplete Machine Status: - NOT WORKING - LT motor defective, repairable Fsdpfx Apsxxip Astegg - Operator panel, safety switch, and two buttons broken and need replacement

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 31-44336, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle has been completely overhauled! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Pallet size: 400 × 500 mm Number of pallets: 6 Pallet change time: 9 s Max. workpiece size: 720 × 800 mm Max. workpiece weight: 500 kg NC rotary table: B-axis B-axis rotation range: 360,000 × 0.001° B-axis rotation speed: 40 rpm Tool holder: SK 63 Max. tool diameter: 150 mm Max. tool length: 227 mm Max. tool weight: 12 kg Spindle speed: 45–24,000 rpm Spindle torque: 48/72 Nm Spindle drive: 30 kW Feed rate X/Y/Z: 1–60,000 mm/min Rapid traverse X/Y/Z: 60,000 mm/min Fodjzwd Htspfx Aptegg Feed force: 10,000 Nm MACHINE DETAILS Total connected load: approx. 60 kW Connection voltage: 400 V Mains frequency: 50 Hz Total weight: approx. 12,500 kg EQUIPMENT Chip conveyor Documentation/Manual