Used Beco Beco Brevis 100 for sale (22,791)

Condition: used, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 350 mm, A1 GW2640818, * Unique, torsionally rigid aluminium chassis for safe driving characteristics * 4 recessed, foldable lashing eyes mounted in the side wall for secure load securing * Side walls made of anodised aluminium hollow profiles, rear foldable, with recessed latches * Folding front wall Bsdjym Ihhjpfx Apaewn * Loading height 550 mm Errors and prior sale reserved

Condition: used, Year of construction: 2023, load capacity: 12,000 kg, lifting height: 5,550 mm, fork length: 2,400 mm, total length: 7,200 mm, · Tragfähigkeit Genormte (kg) 10.000 · Lastschwerpunktabstand (mm) 1200 · Sitzhöhe, EGO cabin (mm) 1770 · Lastabstand (mm) 990 · Spurweite (c-c), vorn – hinten (mm) 1855-1960 · Wenderadius, außen – innen (mm) 4360-125 Bodoyl Agiopfx Apaswn · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 7945 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5-10 · Breite über Gabelblatt, max. – min. (mm 2360-640 · Seitenverschub ± bei Breite über Gabelblatt (mm) 430-1500 · Achslast vorn, ohne Last (kg) 10.000 · Achslast vorn, mit Nennlast (kg) 26.700 · Achslast hinten, ohne Last (kg) 8.600 · Achslast hinten, mit Nennlast (kg) 1.900 · Luftdruck (Mpa) 0,9 · Lenksystem: Typ – Steuerung Hydraulikservo – Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte · Lamellenbremsen (Wet disc brakes) – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder: Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 12,5 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen (l) 15 · Hubgeschwindigkeit Ohne Last (m/s) 0,50 · Hubgeschwindigkeit mit Nennlast (m/s) 0,35 · Senkgeschwindigkeit Ohne Last (m/s) 0,40 · Senkgeschwindigkeit mit Nennlast (m/s) 0,40 · Fahrgeschwindigkeit, V/R Ohne Last (m/s) 29 · Fahrgeschwindigkeit mit Nennlast (m/s) 28 · Steigfähigkeit, max. Ohne Last (%) >120 · Steigfähigkeit, max Mit Nennlast (%) 58 · Zugkraft Max. (kN) 141 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 71 · Geräuschpegel, innen LpAZ*, EGO-Kabine OHG (dB(A)) ·83 · Geräuschpegel, außen LwAZ (dB(A)) 107 · Motor Hersteller – Typenbezeichnung Cummins QSB6,7 (Turbo-Intercooler · Kraftstoff – Arbeitsweise des Motors Diesel – 4-Takt · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm) 945-1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6-6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Getriebe Hersteller – Typenbezeichnung ZF – 3WG171 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts 3-3 · Lichtmaschine Typ – Leistung (W) AC – 1960 · Anlasserbatterie Spannung – Kapazität (V – Ah) 2×12 – 150 · Antriebsachse Hersteller – Typ Kessler D81 – Differential und Nabenreduktion

Condition: used, Year of construction: 2005, Horizon brochure production line consisting of: VAC-100 vacuum collating tower (2 units) SPF-20A stapling and folding module FC-20A front trimmer Technical data: Horizon VAC-100 – vacuum collating tower Function: Collating printed sheets Number of stations per tower: 10 (20 in total with 2 towers) Paper format: min. 120 × 148 mm, max. 350 × 500 mm Paper weight: 52–208 g/m² (up to 300 g/m² in some cases) Stack height per compartment: 55 mm Production speed: up to 9,900 sets/hour Control: touchscreen control panel Horizon SPF-20A – Stapling and folding module Function: Stapling and folding brochures Stapling heads: 2 × Hohner 48/5 Paper size: 120 × 180 mm to 350 × 500 mm Final format: 90 × 120 mm to 250 × 350 mm Stapling thickness: max. 4 mm (stapling only), max. 2 mm (stapling + folding) Stapling distance: 73–160 mm Wire diameter: 0.5 mm Production speed: up to 4,050 brochures/hour (A5), approx. 3,200 brochures/hour (A4) Power consumption: approx. 450 W Dimensions: 271 × 81 × 110 cm Weight: approx. 490 kg Horizon FC-20A – Front trimmer Function: Front edge trimming of brochures Brochure size: max. 250 × 20 mm; min. 85 mm Bwsdpfoxpv Adsx Apajn Trim size: max. 20 mm Processing: min. 4 pages / max. 88 pages (at 80 g/m²) Production speed: up to 3,400 cycles/h Power supply: 230 V / 50 Hz, 0.2 kW Dimensions: 610 × 810 × 1,070 mm Weight: approx. 240 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Manufacturer: Pfaff, hydraulic cylinder short-stroke heavy-duty cylinder -Stroke: 20 mm -Piston rod: Ø 64 mm -Operating pressure: max. 700 bar -Number: 2x cylinders available Bedpfjwuqdiex Apaswn -Price: per piece -Dimensions: 310/150/H85 mm -Weight: 13.4 kg/piece

Condition: used, Year of construction: 2023, gebraucht 2023 7280 prompt, Zwischenverkauf v Türkei 15700 € Bwodpfswiqm Hox Apasn 1 100 to 1000 mm 300 mm 7.5 kW 2110 mm 1000 mm 2275 mm 1900 kg 1 680 mm 1020 mm 5 mm/s 10 mm/s 6 mm 100 mm 190 mm demo machine / mint condition net price (price for new machine € 19.550,00) 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2023, gebraucht 2023 7280 prompt, Zwischenverkauf v Türkei 15700 € 1 100 to fix 1020 mm 300 mm 1020 mm 680 mm 9 mm/s 5 mm/s 10 mm/s 6 mm 500x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2275 mm 2082 kg demo machine / mint condition net price (price for new machine € 19.550,00) 2 guidings Bsdpfjynm Nmjx Apaswn big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel AND FOOT PEDAL Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, operating hours: 638 h, High-pressure air/nitrogen compressor for sale – EFCO Maschinenbau GmbH BOE 100/200 booster. The compressor is used, fully operational. Currently connected – inspection and testing on site are possible. Designed for compressing air or nitrogen up to a pressure of 200 bar. Suitable for pressure testing, industrial processes, valve testing systems, and other high-pressure applications. Specifications: Model: EFCO BOE 100/200 Maximum working pressure: 200 bar Tank capacity: 2 x 50 l (100 l total) Electric drive – 400 VAC Suitable for air and nitrogen compression Automatic shutdown upon reaching maximum pressure Automatic start when pressure drops Simple and convenient operation Filling time from 0 to 200 bar (2900 psi): approx. 2.5 hours Operating hours: 638 h German-made, professional, industrial-grade equipment. If you have further questions, we will be happy to answer them. Bwjdsy R Nnrjpfx Apasn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, usable tank capacity: 100 l, input voltage: 400 V, tank capacity: 100 l, total width: 820 mm, total length: 1,050 mm, total height: 1,690 mm, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, NEW +++ NEW Fermentolevain Fermento NEW +++ NEW TOP system for preparing and preserving liquid sourdough with Dual Care system for best flavors Control of the fermentation and preservation phases with integrated cooling easy-Touch control Mixing time and speed adjustable Stainless steel design Removable stirring tool with overflow – probe and alarm Discharge height 440 mm Bwedpfx Ajt Sckmspaon 2 stirrers, double flap Scrapers on the bottom and sides for high quality Tank capacity 100/125 kg Integrated frame heating and add-on cooling coil Cooling capacity per hour approx. 6°C reduction only available from us, DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH New machine & SAB inspected with warranty + spare parts service Optional: Integrated scale Water connection with hand shower Cleaning cycle Maintenance contract Service package More TOP bakery machines in stock!

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained, used E Brake by Safan Bodpfozbhk Esx Apaown Type E Brake 100 3100 Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bwsdpfxjvf E Avo Apasn Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2012, MAZAK QUICK TURN NEXUS 100-II M Max. machining diameter: 280 mm Max. machining length: 334 mm Max. spindle speed: 6,000 rpm Max. milling spindle speed: 4,500 rpm Max. bar diameter: 51 mm Machine is equipped with: Bwedozav Ehjpfx Apaen - CNC control Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - C-axis - Main spindle with bar capacity 51 mm - NC tailstock - Reinforced coolant pump - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm Bedpfetq Ngbjx Apaewn X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA

Condition: used, Pneumatic cylinder SAD-30/100. Bedpfx Aolkcg Hspaewn

Condition: excellent (used), Year of construction: 2009, MAZAK Quick Turn Nexus 100-II M Mazatrol Matrix Nexus control Bwjdpfx Asyhh Dropaon C-axis with driven tools 6-inch chuck Kitagawa BB206 Spindle bore 51 mm Max turning diameter 280 mm Z-axis 385 mm X-axis 185 mm Max spindle speed 6000 rpm Max driven tool speed 4500 rpm 12-position turret Programmable tailstock Tool probe Parts catcher with the machine: - 4 driven tools (2 left, 2 right) - 8 standard tool holders - chip conveyor - documentation Operating hours: 3180 hours

Condition: excellent (used), Year of construction: 2007, 2-axis CNC lathe MAZAK QTN 100II Mazatrol Matrix control Collet chuck Spindle bore 45mm Turning length 310mm Turning diameter 280mm X-axis travel 190mm Bjdpeyvzwvofx Apaswn Z-axis travel 330mm Spindle speed max. 6000 rpm Turret with 12 positions -Tool probe -Tailstock -Parts catcher -Interface for bar feeder Included with the machine: -Mayfran chip conveyor with coolant tank and pump -Documentation

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t Bodpfx Aju Nfhdopaewn distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: used, Year of construction: 1983, Technical details: Bwodpfx Apeu Nfizeajn pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm This press is currently for sale without controls. Bwsdpeu Nfh Djfx Apasn Optional on customer request completion possible. i.D. *

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Both pumps = 7.5 kW Weight 164 kg * Bwodpfx Aeu N E Htepajn

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t Bwedpfx Apsu Nfi Usaen stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm Bedpfx Ajvc Awrspaown y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm Bwjdpjvc Ax Nofx Apajn ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, usable tank capacity: 100 l, input voltage: 400 V, tank capacity: 100 l, total width: 995 mm, total length: 870 mm, total height: 1,300 mm, TOP Aroma System Isernhäger A 100 for thermally controlled pre-mixing Bodjyhznuspfx Apajwn for the individual production of leavened, steeped, cooked, and flavored dough pieces easy control with a special mixing unit robust technology Connection: 400V, 16A CEE plug Dimensions: 995 x 870 x 1300 mm (W x D x H) Used machine, cleaned & SAB inspected Options: Maintenance contract Delivery service Spare parts box Instruction and commissioning Come and visit us!

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Bsdpfsvvi Scex Apajwn

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, hydraulic flat cylinders -Manufacturer: Yale, hydraulic cylinder with spring return, single-acting, 100 mm stroke Bedpfx Ajwtmznepaewn -Type designation: YS-23/100 -Piston rod: Ø 42 mm -Lifting capacity: 23 t -Operating pressure: max. 700 bar -Number: 3 cylinders available Price: per piece -Dimensions: 150/85/H195 mm -Weight: 7 kg/pc.