Used Bench Grinder Ds 400 S for sale (79,081)

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Fodpfx Aasxg Hrke Nsgb Further questions can be answered by phone.

Condition: used, Double Bench Grinder STEPHAN-WERKE HAMELN Type SLD 121 Serial No. 1176445 Grinding wheel diameter: 175/145 mm Grinding wheel width: 20 mm Motor power: 0.37 kW Grinding wheel speed: 2800 rpm Mains connection: 380 Volt, 50 Hz - Original base - Side-mounted ball bearing slide with dovetail guide - Universal holder for the sliding carriage Space requirement (L x W x H): 470 x 430 x 1160 mm Weight: approx. 80 kg In good condition Fjdpfx Aasxciu Hj Njgb

Condition: used, Double bench grinder METABO type 7206 D Year of manufacture: approx. 1985 Max. grinding wheel diameter: 150 mm Grinding wheel width: 20 mm Fgjdpfjxf Uv Uex Aa Nob Grinding wheel bore: Ø 32 mm Speed: 3000 rpm Motor power: 280 watts Power supply: 380 volts, 50 Hz – Fitted with one 36 and one 80 grit corundum grinding wheel Required space (L x W x H): 460 x 240 x 220 mm Weight: 18 kg Good condition

Condition: used, Double Bench Grinder GREIF Type D 17 Serial No. 05105 Grinding wheel diameter: 175 mm Grinding wheel width: 25 mm Motor power: 0.35 kW Grinding wheel speed: 2800 rpm Fgedpsxciu Tjfx Aa Neb Power supply: 380 Volt, 50 Hz - Grinding spindle newly fitted with bearings - Original pedestal Required space (L x W x H): 500 x 450 x 1120 mm Weight: approx. 100 kg Good condition

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Fsdjt Hw S Uepfx Aa Nogb Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: new, Year of construction: 2025, functionality: fully functional, The DMS 400 brush sanding machine is manufactured by our company and is built using top-quality components. Grinding/sanding is performed manually by pressing the workpiece against the rotating sanding head. The DMS 400 is intended for processing materials such as wood, metal, composites, and paint/varnish. For optimal machine performance, we recommend Flex Trim flap wheels as the abrasive tooling. By using Flex Trim sanding materials, you benefit from: Better and more uniform surface quality – Optimum sanding results Optimized production and working environment Extended lifespan of abrasive materials TECHNICAL DATA: Power: 0.55 kW Rotational speed controlled by frequency inverter Flex Trim brushes 2 Flex Trim heads 400 x ø180mm Dimensions: 1330mm x 750mm x 1100mm (Width – Length – Height) Weight: 180 kg Fgodpfoxp E Dwox Aa Nob ADVANTAGES OF THE DMS 400: Sands wood, metal, composites, paint/varnish Easy to operate Polish-manufactured sanding machine

Condition: excellent (used), functionality: fully functional, filling opening width: 1,600 mm, filling opening length: 2,200 mm, bale width: 400 mm, bale height: 400 mm, total width: 3,345 mm, total height: 3,160 mm, total length: 7,440 mm, input voltage: 380 V, overall weight: 28,000 kg, power: 55 kW (74.78 HP), Equipment: documentation/manual, Baler 400 x 400 mm. Very good condition. Well maintained. Fgjdpfsxcazwjx Aa Neb

Condition: excellent (used), Joystickbox for Mitutoyo CMM with CMMC 1, 1S, Fgjdpfsgynw Dex Aa Neb 2; 2S; 3; 3S; 6 and UC200/400

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper Fedpfx Aasxxuyto Nsgb - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: new, machine/vehicle number: 408ba9a39bbb8087056d6e563, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguards 1st + 2nd axle with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 storage box on offset recessed in floor with lid, W=720 mm/ L=520 mm / D= 170 mm Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3,000 mm Storage compartment for wooden planks under the loading area Low loader lashing eyes (40 lashing options) 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing points at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) 3 additional pairs of hinged lashing eyes, 10 tons each 1 x inside next to the main frame at the start of the low bed Fgsdoi Ri Daopfx Aa Nsb 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Towing equipment Trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined 8° / D-value min. 160 kN Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Offset at the front with steel/ checker plate flooring Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of approval / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized

Condition: excellent (used), Year of construction: 2019, TITANIUM PICKLING PLANT Comprises 16 tanks Tank – Degreasing, large 1150 x 1000 x 1200/1250 mm Tank – Rinsing Tank – Hot rinse Tank – Etching Circulation pump 1 - Level probe; PTFE 1 Fodpfx Aasxa Dmls Negb - Temperature sensor 1 - Manual top-up DI water valve 1 - Manual lid 1 - Supports 2 Complete titanium pickling plant

Condition: used, mileage: 2,28,400 km, power: 130 kW (176.75 HP), first registration: 11/2006, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: orange, gearing type: semi-automatic, emission class: euro4, Equipment: air conditioning, all wheel drive, * Mercedes Unimog U400 4x4 * 3-way tipper * All-wheel drive * Dual-range gearbox * Dual PTO (high and low) * Rear hydraulic system * Snow plow preparation * Front PTO * Semi-automatic transmission * VIN: WDB4051031V211726 * Engine type: 900916 * kW: 130 * Euro 4 * Displacement: 4249 cc * Unladen weight: 6540 kg * Gross weight: 12500 kg * Fifth wheel load: 1000 kg * Towing capacity: 18700 kg * Wheelbase: 3080 mm * Tipper length: 2.40 m Fodpjqcriuofx Aa Negb * Tipper width: 2.15 m * Vehicle length: 5150 mm * Vehicle width: 2330 mm * Vehicle height: 3070 mm * Tires: 385 / 65 R 22.5 * Net price * All information without guarantee Tel./WhatsApp:

Condition: excellent (used), Steel grinding machine REMA Fgodowv Smnopfx Aa Njb 2 speeds 1450–2900

Condition: ready for operation (used), Double grinding stand, 380 Volt, up to 500 mm grinding wheels Fgsdpfx Aaodt Suno Nsb

Condition: used, Bench Grinder – CONSTAN New Star Motorist Manufacturer Constan – New Star Motorist (France) Type Double-wheel bench grinder (three-phase motor) Industrial Applications - Manual tool sharpening - Deburring of metal parts - Surface preparation and light grinding - Maintenance and repair workshop tasks Main Technical Specifications: - Power supply: 220 / 380 V – 50 Hz (three-phase) - Motor power: 1.5 HP - Current: 1.8 A at 380 V - Speed range: 2030 RPM max, 1550 RPM min - Rotation direction indicated by arrow 🧩 Machine Usage Heavy-duty bench grinder designed for tool sharpening, rough grinding, and surface cleanup. Ideal for general mechanical workshops, tool rooms, and industrial maintenance tasks. ⚙️ Features / Differentiators Fgedpfxsw Ec Nro Aa Njb Equipped with a dual-voltage industrial motor, this grinder is adaptable to standard workshop three-phase networks. It stands out with a wide speed range, making it suitable for both fine and coarse grinding operations, and a 1.5 HP integrated motor, offering power and durability.

Year of construction: 1995, condition: good (used), machine/vehicle number: 044092, Offer 22148 Technical data: Fgsdpfx Asiba R Noa Neb - Grinding wheel diameter approx. 200 mm - grinding wheel width approx. 25 mm - grinding wheel bore approx. 51 mm - wheel speed 1450 rpm - drive 400 V / 0,7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting

Condition: good (used), Year of construction: 2008, machine/vehicle number: 87920908, Offer 24228 Fodpfx Ajv Hzq Sea Nsgb Technical data: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg

Year of construction: 1985, condition: good (used), machine/vehicle number: 013125, Offer 21283 Fgodpfx Asi Daw Toa Neb Technical data: - Grinding wheel diameter approx. 500 mm - grinding wheel width approx. 50 mm - grinding wheel bore approx. 127 mm - wheel speed 950 rpm - drive 400 V / 3,3 kW - working height approx. 800 mm - working depth / protection depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 41,881 h, functionality: fully functional, machine/vehicle number: 217330, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen distance: 1,100 mm Fjdpfx Aaew Suy Ij Nsgb Min. mold height: 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Specific injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Heating power (electric): 13.6 kW Motor power (electric): 30 kW Operating hours: 41,881 h EQUIPMENT Handling unit GEKU SR 500 SH, year of manufacture: 2011 Conveyor belt "16"

Condition: ready for operation (used), Year of construction: 2017, operating hours: 16,948 h, functionality: fully functional, machine/vehicle number: 239279, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen spacing: 1,100 mm Mould height: min. 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Fsdow Su A Njpfx Aa Nsgb Spec. injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Electric power heating/motor: 13.6/30 kW Operating hours: 16,948 h EQUIPMENT Handling industrial robot SEPRO Stäubli 6X 160

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Fedpfxoxr Dyve Aa Negb Total height: 1100 mm Weight: approx 80 KG

Condition: used, Double Bench Grinder REMA DS 04/150 Rotation: 2900 RPM Grinding wheel: Ø 150 x 25 mm Motor power: 0,3 kW Voltage: 380 V Fsdpfxsxr D Aqo Aa Nsgb Width: 450 mm Depth: 300 mm Total height: 1100 mm Weight: env. 50 KG

Condition: excellent (used), Year of construction: 1950, Safag Type27 Special Carbide Bit Grinder Brand: Safag Model: 27 Serial number: 296 Year of manufacture: Vintage 1950s (approx.) Dual 6" diamond wheels with fine grit (700) Universal tool holder Tool holder for up to 10 mm square bit tools Coolant tank mounted on the back of the machine 3/4 HP main drive 220 volts 3Ph Complete factory locking system, wide range of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Fgedpfxsh Izv As Aa Nob Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: like new (used), Pump name: KRTK 100-400/654UG1-S Year: 2016 Q (capacity): 76.39 m³/h Fgodpfx Aaeu Up Rwo Nob H (head): 51 m Motor power: 62 kW Speed: 1475 rpm

Condition: new, Motor ----- 900W Voltage ----- 400V - 3 Phase Speed ----- 2950 rpm Grinding stone dimensions ----- 250 x 32 x 32 mm Coarse stone ----- Grain 36 Fine stone ----- Grain 80 Fedpfx Aajga Tw Ao Nogb Safety class ----- IP40 Weight ----- 32 kg OPTION * Support box Price: € 99,00 ex vat