Used Beyschlag Resistance for sale (2,010)

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized Podpozvz Tbefx Alworb - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: new, functionality: fully functional, power: 10.3 kW (14.00 HP), color: red, lifting power: 600 kg/m, shovel volume: 0.13 m³, Year of construction: 2025, The design of the simplified control panel is user-friendly, making operation easier and more comfortable. Comfortable seating, intuitive operation Ergonomically designed seats enable long working periods without fatigue. The recommended operator layout streamlines the workflow and increases efficiency. Podpfx Alow Ufqijwjrb Machine body made from high-quality material The frame of the mini loader is manufactured from high-grade steel, enhancing stability and wear resistance, which ultimately improves the machine’s durability. More powerful machine core A brand-name engine and premium internal components ensure reliable performance of the mini loader. PERFORMANCE: Model: H130 PRO Payload: 238 kg Bucket volume: 0.13 m³ Maximum lifting force: 600 kg Travel speed: 0–4.2 km/h Hydraulic pressure: 18.5 MPa Lifting time: 4.7 s Lowering time: 3.2 s Dumping time: 4.6 s Gradeability: 30% Operating weight: 780 kg ENGINE: Brand: KOOP Model: 192F Type: 1-cylinder, diesel Power: 14 hp / 3600 rpm Fuel consumption: ≤ 2.3 l/h Starting: electric Tank capacities Fuel tank: 5.5 l Engine oil: 1.65 l Hydraulic oil: 23 l DIMENSIONS: Length with bucket: 2373 mm Width with bucket: 1050 mm Width without bucket: 1010 mm Height with ROPS: 1867 mm Height without ROPS: 1291 mm Track width: 800 mm Ground clearance: 180 mm WORK RANGE: Maximum working height: 2572 mm Height to bucket pivot pin: 1953 mm Maximum dump height: 1484 mm Dump reach: 561 mm Dump angle at max height: 29° Rollback angle on ground: 24° PRICE: €6,900 net €8,211 gross KINGWAY DEUTSCHLAND is the sole permanent distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. Our extensive inventory ensures around 100 machines are available at any time. We deliver throughout Germany, Austria, Switzerland, Italy, and neighboring countries. We also provide our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, This listing is for informational purposes only and does not constitute a legally binding offer. Prsdpfsyk Tvfox Alwob The ultra-light straight snow blade features a compact, lightweight design, making it ideal for winter maintenance of agricultural land as well as municipal areas such as clearing yards, walkways, parking lots, and residential streets. The low dead weight allows it to be used with carrier vehicles of low engine power. The scraper bar is available either in wear-resistant steel or rubber. Blade angle adjustment is manual in one of five positions (optional hydraulic adjustment directly from the driver's cab via a hydraulic cylinder). The plough is equipped with a support leg. 1500 mm Working width: 1500 mm Length: 910 mm Width in working position: 1470 mm Height: 630 mm Weight: 136 kg Sheet thickness / blade profile: 4 mm Number of rubber blade segments: 3 pcs. Price: 1000 € net 1190 € gross 1800 mm Working width: 1800 mm Length: 910 mm Width in working position: 1750 mm Height: 630 mm Weight: 148 kg Sheet thickness / blade profile: 4 mm Number of rubber blade segments: 4 pcs. Price: 1100 € net 1309 € gross 2000 mm Working width: 2000 mm Length: 910 mm Width in working position: 1930 mm Height: 630 mm Weight: 156 kg Sheet thickness / blade profile: 4 mm Number of rubber blade segments: 4 pcs. Price: 1200 € net 1428 € gross

Condition: new, Galen Hot Slag Bucket is specially designed for demanding steel mill and high-temperature material handling applications. Prsdjzut A Espfx Alwjb The bucket features a reinforced heavy-duty construction to withstand impact, abrasion and extreme working conditions. It is also coated with high-temperature resistant, fire-resistant paint for additional protection in hot slag applications. Main Features: Heavy-duty reinforced structure Designed for handling hot slag and abrasive materials High-temperature / fire-resistant paint coating High wear and impact resistance Suitable for steel plants, foundries and recycling facilities Optimized bucket geometry for efficient loading and discharge Custom manufacturing according to machine model and application Pin-on or quick coupler connection options Different capacities and widths available upon request Galen manufactures buckets and attachments for excavators and wheel loaders in its own production facilities in Turkey. Please contact us with your machine brand/model, required bucket capacity and working conditions for a customized quotation. Manufacturer: Galen Group Country of Production: Turkey

Condition: excellent (used), EA Elektro-Automatik 120 kW High-Voltage Rack System Manufacturer: EA Elektro-Automatik GmbH & Co. KG Rack: EA Rack 24 RU for 4x PSB/ELR 10000 4U Series Article No. Rack: 09114762 Power Modules: 4x PSB 11000-80 For sale is a complete bidirectional, high-performance rack system with four EA PSB 11000-80 units. The PSB units combine a programmable DC power supply and an electronic load with grid feedback into a single device. The system is particularly suitable for high-voltage test benches, battery and energy storage testing, e-mobility, automotive, power electronics, as well as research and development. Technical Data: 4x EA PSB 11000-80 Voltage range per module: 0–1000 V DC Current range per module: 0–80 A Power per module: 30 kW Installed rack total power: max. 120 kW Resistance range per module: 0.4–650 Ohm Output capacitance per module: 200 µF Efficiency source/sink: up to approx. 95.8 % Rack connection data according to nameplate: Rated voltage: 3x 400 V AC L1/L2/L3/PE Rated current: 3x 192 A Frequency: 45–65 Hz Operating mode: Continuous P-max: 120 kW Country of manufacture: Germany Equipment: 4x EA PSB 11000-80 EA 24 RU industrial rack Bidirectional source/sink operation Grid feedback Master-Slave/Share-Bus connection Common DC high-current copper busbars Color touch displays USB and Ethernet interfaces Bender LINETRAXX VMD460 Separate protection of the power modules Main switch Emergency stop Touch protection for the DC busbars Integrated power and protective conductor distribution The four power modules are interconnected within the rack. The common DC power distribution is provided via touch-protected copper busbars. Dimensions / Transport data: Dimensions L x W x H: approx. 1,050 x 610 x 1,400 mm Weight: approx. 400 kg Footprint: approx. 1,050 x 610 mm Pallet spaces: 1 Shipping: Freight forwarder The dimensions and weight are preliminary transport values based on a comparable rack. Condition: Used Optical condition according to the images. The devices can be switched on, and the displays are active. A complete power and feedback test is not documented. Scope of delivery: 1x EA Elektro-Automatik 24 RU Rack 4x EA PSB 11000-80 Bender LINETRAXX VMD460 Integrated power, protection and monitoring technology Cabling and equipment according to the images Prsdpfx Ajzyltgolwsb Inspection possible by prior arrangement. Loading possible by arrangement. Availability: by arrangement. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 Prodpfjw U Sz Iox Alwsb GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: new, empty load weight: 144 kg, maximum load weight: 606 kg, overall weight: 750 kg, axle configuration: 1 axle, Year of construction: 2024, Manufacturer UNITRAILER Product code UT004240 Model Garden Trailer 264 KIPP Podpor Nbp Hsfx Alwerb GVW min. 300 kg GVW max. 750 kg Length of loading area 2641 mm Width of loading area 1256 mm Tire type 155/70 R13 Spare wheel with holder optional Where are the wheels located outside the load compartment? Type of suspension unbraked axle up to 750 kg Number of axles 1 Braked no Drop sides steel Dropside height 300 mm Type of loading area made of screen-printed floor panel Tipping mechanism yes Use Removals, internal transportation of goods Tare weight 144 kg Total capacity 606 kg Reversing light No Long trailer GARDEN TRAILER 264 KIPP with high tarpaulin, high bows and support wheel Below you will find more information about the largest single-axle trailer (currently available from UNITRAILER) with a transport area of 264x125 cm, which can be used to transport large loads with ease. The Garden Trailer 264 KIPP makes all transportation tasks easier. The trailer also has a tipping mechanism that allows virtually all loads to be loaded and unloaded at lightning speed. Required documents and immediate delivery If you decide to buy the Garden Trailer 264 KIPP with high tarpaulin and high frame, you don't have to worry about any official matters. We will do everything for you to save your time and guide you smoothly through the execution of the order. We will prepare the necessary documents for you that you need for immediate registration, i.e. invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. The purchased car trailer will be dispatched within 7 working days with the complete set of documents. Buy online now! The car trailer is both tiltable and very robust. What should you look out for in the Garden Trailer 264 KIPP model? - Very large transport area, which facilitates the transportation of large goods - Corrosion-resistant structure - Above-average strength with additional support beams under the loading area - clearance lights, which are very important when reversing - corrosion-resistant and very robust mudguards - rear lights that are protected against damage - the option of placing the trailer on the tailgate [this ensures that the trailer takes up little space] - the wheels on this model are mounted on the side (and not under the loading area), which is a very convenient solution when driving without a load Technical dimensions of the Garden Trailer 264 KIPP car trailer DRIVE: - Steering axle from Knott or AL-KO - Wheel size: 155/70 R13 - Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time. CONSTRUCTION: - Support frame made of hot-dip galvanized sheet steel - Curved profiles with bolts were used - Loading area: anti-slip screen-printed floor panel, 9 mm thick - Loading area dimensions: 2640 mm (length) x 1250 mm (width) - Overall dimensions: 3541 mm (length) x 1690 mm (width) DROP SIDES: - all drop sides are made of galvanized steel - Rear dropside can be opened and completely removed - 110 cm (standard drop sides - 30 cm high, high bows - 80 cm high) - corrosion resistant Shipping from: 249€

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, tire size: 13, wheelbase: 155 mm, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004188 The UNITRAILER Garden Trailer 230 TIPPING transport trailer is the latest product from UNITRAILER. It is currently our largest car trailer with a GVWR of up to 750 kg. The trailer has a folding tailgate, which allows for loading and unloading in just a few minutes. By using a tilting drawbar, it can be placed vertically against the rear wall. We will take care of all formalities associated with the purchase for you. When ordering a car trailer, please specify the GVWR of the vehicle that will be towing the trailer. You can find information on the permissible total weight on the last page, under the information in the vehicle registration document. Technical data of the Garden Trailer 230 TIPPING car trailer CHASSIS - Steered axle from Knott or AL-KO – special orders available on request from Unitrailer. Wheel size: 155/70 R13. Tilting V-drawbar that can be folded under the trailer floor at any time. BODY - Load-bearing frame made of hot-dip galvanized sheet steel. Curved profiles were used with screws. Loading area: non-slip, water-resistant screen-printed plywood, 9 mm thick. SIDE WALLS - all side walls are made of galvanized steel. Rear side wall folds down. Predjir H R Nspfx Alweb Delivery costs will be charged separately.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 3.6 m³, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004191 The Garden Trailer 230 TILT car trailer from UNITRAILER, with a maximum permissible weight of up to 750 kg, features a folding rear gate, allowing for loading and unloading in just a few minutes! The tilting drawbar allows it to be positioned vertically on the rear gate at any point. All formalities related to the purchase will be handled for you. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will be used to tow the trailer. Technical data of the Garden Trailer 230 TILT car trailer: CHASSIS - Steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-shaped drawbar, which can be folded under the trailer floor at any time BODY - Load-bearing frame made of hot-dip galvanized sheet steel Pjdpfxjir H R To Alwerb Curved profiles were used with screws Loading area: non-slip and water-resistant screen-printed plywood floor, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel. Total height of the side panels: 70 cm Shipping costs will be charged separately.

Condition: used, Year of construction: 2019, ## Universal Robots UR5 with CB3.1 Controller The CB3.1 (Control Box 3.1) is a robust and widely utilized control platform known for its stability and user-friendly interface. Paired with a 2019–2020 UR5 arm, this configuration offers a highly reliable automation solution that balances modern safety standards with simplified industrial integration. ### Hardware Overview * Teaching Pendant: 12-inch wide-screen resistive touch pendant with a user-friendly GUI (PolyScope). * Digital I/O: 16 Digital Inputs and 16 Digital Outputs. * Analog I/O: 2 Analog Inputs and 2 Analog Outputs. Predsyy Itfopfx Alwob * Communication: Modbus TCP, PROFINET, Ethernet/IP, and TCP/IP. * Power Source: 100-240 VAC, 50-60 Hz. --- ### Key Technical Benefits * Enhanced Safety Logic: The 3.1 revision features improved safety-rated I/O and dual-channel safety circuitry, allowing for Category 3, PLd safety configurations without complex external hardware. * Proven Stability: As the final and most refined iteration of the CB3 series, the 3.1 controller is optimized for high uptime and is compatible with a massive library of legacy UR+ grippers and sensors. * Programming Versatility: Supports both Graphical Programming (Polyscope) for beginners and URScript for advanced users who require complex logic and external peripheral control. * Small Footprint: The compact cabinet design allows it to be tucked under workstations or mounted in tight spaces, mirroring the agility of the UR5 arm itself. --- ### Connectivity & Expansion The CB3.1 controller acts as the central hub for your entire work cell: * Tool I/O: Provides 12V/24V power and I/O directly at the tool flange, minimizing the need for external cables along the arm. * Remote Control: Can be easily integrated into a Master PLC system via standard industrial Ethernet protocols. * Quick Setup: Features a "Teach" button on the back of the pendant for easy manual guidance of the robot arm. --- ### Technical Summary Table | Feature | Specification | | :--- | :--- | | Safety Functions | 15 Configurable Safety Functions | | I/O Ports | 16 DI, 16 DO, 2 AI, 2 AO | | IP Rating | IP20 (Controller) / IP54 (Robot Arm) | | Ambient Temp | 0°C to 50°C | | Software | PolyScope (CB3 Edition) |

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Prodpfx Aoy Apdqslwjb Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: good (used), Approx. 4-500 units, SSI Schäfer, Euro container LTB 8320 - used: Price per unit, ex warehouse: €8.50 (net)! Manufacturer: SSI Schäfer Type: LTB 8320 Year of manufacture: unknown Volume: 135 liters Weight: 5.28 kg Temperature resistance: -20 to +100 degrees Dimensions: External dimensions: Length 800 mm Width 600 mm Height 320 mm Internal dimensions: Pjdpfszv Ippox Alworb Length 752 mm Width 552 mm Height 317 mm New price: approx. €80 Condition: good Available: immediately Location: Frankenberg/Saxony warehouse

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDT Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Technical Specifications Hopper Dryer HDE-25 • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW • Installation Size: 150 × 150 mm • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW Podpfszv Emljx Alwjrb • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg

Condition: new, functionality: fully functional, fuel type: electric, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 150 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. Pedpfx Aszwftnjlwsrb GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, table length Rohmateriallänge 6500 mm table width Rohrdurchmesser max. 230 mm burner heads 1 Control CNC workpiece weight 300 kg traversing speed 91 m/min weight 5750 kg Pjdpfxswh Ulde Alwerb dimensions of the machine ca. 12900 x 2370 x 2650 mm Tube laser with T-loader Configuration 1. Bodor Power laser source 6 KW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-up servo blanking clamp 7. Support for composite clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water cooler 17. Extraction system 18. Wear parts set 19. Auxiliary feeding device T-Loader: - One-click adjustment - Material shortage alarm - Automatic loading - Scratch-resistant tube - Host safety lock - Tube size range: Round tube 20 - 220 mm Square tube 20 - 220 mm Rectangular tube 220 mm = side length = 20 mm - Maximum tube weight: 300 kg - Pipe loading length range: 4500 mm-6500 mm - Maximum loading weight: 1800 kg CUTTING CAPACITY: STRUCTURAL STEEL 16 mm STAINLESS STEEL 12 mm ALUMINUM 10 mm WALL THICKNESS STRUCTURAL STEEL* (mm) If DM < 50: WS = 1.2 If DM = 50: WS = 2.5% × DM Max. finished part length 4500 mm OPTIONAL: LANTEK FLEX3D TUBES PLUS

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Prsdsun Um Eopfx Alwob * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm Prsdpfexz Hhzjx Alwsb capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: excellent (used), Year of construction: 2017, cutting diameter 350 mm saw band length 4780 x 34 x 1.1 mm capacity 90 degrees: flat 500 x 340 mm capacity 45 degrees: round + 350 mm capacity 45 degrees: flat + 380 x 340 mm capacity 60 degrees: round 230 mm capacity 60 degrees: flat 220 x 340 mm capacity 45 degrees: round - 350 mm capacity 45 degrees: flat - 220 x 340 mm coolant capacity ca. 100 l band speed 20 - 100 m/min Control SIEMENS voltage 3x 400 V total power requirement 3.0 kW AC weight 2150 kg range L-W-H 3030 x 3150 x 2000 mm In very good condition Demo machine from the manufacturer PEGAS With a wide range of special features Original price about 60.000 euros Special price upon request - in checked conditions - machinevideo - ?v=dv_wXIT9BaQ Features: - Robust, highly efficient electro-hydraulic miter band saw * Fully automatic (INDUSTRIAL) = with automatic material feed * Model: Two-column band saw * Maximum stability and vibration damping during cutting * Powerful saw band drive with a 3.0 kW motor - Material feed unit with ball screws * "Longstep feed gripper" for a maximum feed length of 1.000 mm - Includes SIEMENS PLC control unit * Selectable semi-automatic or fully automatic cycle * 200 programs, each with 99 programmable cut lengths and quantities * When the remaining length is 500 mm, the machine interrupts the sawing cycle * Protection against damage or jamming of the material - For angles from 0° to 60°, with a ball-bearing rotary table * Programmable CNC adjustment of the miter angle * Right (0° to 60°) and left (0° to 45°) * Stepless adjustment of the miter angle * Adjustment via a robust gear train - Saw blade guides made of carbide plates - Saw feed infinitely adjustable via a fine-adjustment knob Prodpfx Aezqgf Sslwob - Sturdy machine bed and torsion-resistant saw frame - Infinitely variable speed adjustment of the saw blade - Coolant system - Operating instructions for the machine and control system

Condition: new, bore capacity in steel (diameter) 30 mm throat 254 mm bore stroke 120 mm 4 Motor output 9 speeds 120 - 1810 U/min column diameter 92 mm table surface area 475 x 425 mm total power requirement 1,1 kW dimensions 915 x 450 x 1705 mm weight ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability Pedpfx Aeq Nrmrjlwerb * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: excellent (used), Vertical tank with a capacity of 30,000 liters. Diameter: 2800 mm Height: 5600 mm The tank comes with a complete set of lids for closing. The tank is made of fiberglass-reinforced polyester. The tank is resistant to chemicals and acids. Prodjzyz Ugopfx Alwob Please see my other listings.

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min • Saw spindle speed: 2,900 rpm • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm • Rip fence and machine table. Psdpozkkf Aofx Alwjrb • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: new, Year of construction: 2025, Quick option to shrink film packaged briquettes. Operator manually loads briquettes into machine and it packs them into selected thickness film. Does not need an automated transporter system, compact. Two sided seam system is more dust resistant (when compared to airless units which have a very long seam). Has a plate that covers sealing surface from dust during operation. Selectable package width. Can be used for other products (bottles, sugar packets Pedpfxotpnwls Alworb and etc.). Can be purchased with motorised conveyor which returns packages back to operator for better ergonomics. Recommended to be used with 1-3 presses depending on operator capabilities. Specifications: Min cycle time: 8 seconds Installed power: 22kW Length: 3500mm Width: 1500mm Height: 2100mm Weight: 700kg Warranty: 2 years / 1000 workhours

Condition: good (used), For sale is a heavy-duty industrial lathe TOS TRENČÍN type 16D20 (long-bed version). The machine stands out for its robust construction, smooth operation, and an exceptionally large spindle bore – ideal for shafts, pipes, and large workpieces. Technical Data Machine type: Engine lathe with leadscrew and feed shaft Manufacturer: TOS TRENČÍN Model: 16D20 Control: conventional Max. turning diameter over bed: 400 mm Max. turning diameter over cross slide: 220 mm Spindle bore: 63 mm Max. workpiece length: 1,000 mm Spindle speed range: 8.5 – 2,000 rpm Main drive: 11 kW Dimensions & Weight Dimensions (L × W × H): approx. 2,880 × 1,270 × 1,605 mm Machine weight: approx. 2,800 kg Heavy, torsion-resistant machine construction Large working area for universal turning tasks Precision spindle bearings Smooth running even at high speeds Suitable for single-piece and series production Used Solid industrial machine Technically fully functional Ready for operation Pjdoypcy Repfx Alwerb Delivery time: immediately Terms: ex-site, loaded free of charge Loading: no problem Transport / forwarding: can be organized

Year of construction: 2002, condition: good (used), machine/vehicle number: 90996-1, Pizza electric oven Brand: Moretti Forni Rialto, type RHC / 18 CZ Year of manufacture: 2002 Serial number: 90996-1 Pizza oven frame support on rollers. The oven has 3 chamotte Thermal insulation electric oven 1 pizza room of 12 pizza Ø 30 Fibreglass insulation Viewing windows emergency stop Digital display Digital temperature display Digital control unit Heat resistant materials Athermal door handles Baking surface made of special cotton wool under the effect of heat Pedeg H Tlzspfx Alwjrb Adjustable temperature Temperature: 400 ° C constant temperature (even with frequent opening) connection Power: 9.3 kW Electrical connection: 3 / N / PE 400 volts / 50 Hz Size: Oven external dimensions: L x W x H: mm 1600x1350x650 Oven interior dimensions: L x W x H: mm 1300x950x180 Dimensions of the structure on rollers: L x W x H: mm 1600x1150x900 Total external dimensions: L x W x H: mm 1600x1350x1550 Price: 1,600 Euro + VAT, negotiable, FCA Oradea, Jud. Bihor, Romania A separate guarantee is provided upon request, for a fee. We reserve the right to make mistakes, modifications and prior sale. You can make us a firm offer if you are interested in this pizza oven. We sell this labeller “as it is”. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), The NI IC-3171 is a compact, fanless industrial controller designed for use in machine vision systems, industrial automation, quality control, and measurement applications. The device is equipped with an Intel Celeron processor, 4 GB of RAM, and a 32 GB SSD, ensuring stable and reliable operation in industrial environments and research and development laboratories. Other National Instruments devices and accessories are also available: PXIe-1085 – PXI Express chassis, sbRIO-9651 – embedded Single-Board RIO controller, NI IC-3120 – industrial vision controller, NI PCIe-8233 – 4-Port GigE Vision PoE frame grabber card, NI 8234 Dual Gigabit Ethernet Controller for Windows – dual-port Gigabit Ethernet controller, NI PXIe-8238 – dual-port 10 Gigabit Ethernet module for the PXI Express platform, NI PXI-6224 M Series DAQ – M Series data acquisition (DAQ) card, NI Vision Builder AI Development Kit – software license, NI Vision Development Module Run-Time (778044-35) – runtime environment license, NI PCIe-6509 – 96-channel 5 V digital input/output (DIO) card with NI-DAQmx support, Industrial Controller and CVS I/O Accessory with a 3 m long, 44-pin male-to-female HDSub cable, Panel Mount Accessory for IC-317X Industrial Controllers – panel mount kit for the IC-317X controller series. The controller runs on Windows Embedded Standard 7 (WES7) and is designed for integration with industrial cameras, data acquisition systems, and applications requiring continuous operation. Thanks to its fanless design, the device offers high resistance to dust, dirt, and mechanical failures associated with traditional cooling systems. Specifications Manufacturer: National Instruments (NI) Model: IC-3171 Type: industrial controller Processor: Intel Celeron RAM: 4 GB SSD: 32 GB Operating System: Windows Embedded Standard 7 (WES7) Design: Fanless Operating Temperature Range: 0°C to 55°C Application: machine vision, industrial automation, metrology, test & measurement Applications Machine vision systems, Quality control and production inspection, Industrial automation, Data acquisition and analysis, Industrial camera integration, Prjdpfxjzkazao Alwjb Measurement stations, Research and development laboratories, Industrial applications operating in continuous mode. Key Features Compact industrial design, Fanless operation for increased device reliability, Support for machine vision systems and measurement applications, Ability to integrate with industrial devices and control systems, Stable operation in demanding industrial environments, Solution used in quality control systems and industrial automation. The device comes from equipment used in research and development activities related to machine vision systems, metrology, and industrial automation. The technical and visual condition corresponds to the product photos. The product is covered by a short-term warranty.