Used Buddisa Bag Rt 7000 Farm for sale (8,285)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Dodpfx Aey Urtfokgokn Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2002, A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible. Dodpjzb Nlkefx Akgjkn

Condition: used, Year of construction: 2008, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2008 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles (Coca-Cola, multiproduct, Sprite formats) Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower bottles DELTA reject system Vision system: CCD matrix cameras 32-bit image processors Stroboscopic lighting with microprocessor control Control system: HEUFT SPECTRUM multiprocessor control Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display Construction: Stainless steel and synthetic material housing Additional features: Encoder for conveyor speed monitoring Automatic air-blow cleaning system Pre-programmed bottle formats with additional programs Dodpjy Ucy Nofx Akgskn

Condition: used, Year of construction: 2007, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower bottles DELTA reject system Vision system: CCD matrix cameras 32-bit image processors Stroboscopic lighting with microprocessor control Control system: HEUFT SPECTRUM multiprocessor control Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display Construction: Stainless steel and synthetic material housing Additional features: Encoder for conveyor speed monitoring Automatic air-blow cleaning system Pre-programmed bottle formats with additional programs Dodpoy Ucyvsfx Akgskn

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 87A, total width: 2,400 mm, total length: 10,500 mm, total height: 2,300 mm, cutting length (max.): 670 mm, type of input current: three-phase, overall weight: 9,000 kg, Holweg RS2 (42GL) Year 1988 Brand: Holweg Model: RS2 (42GL), modified for standard single-channel RS21 operation Year: 1988 For the production of flat-bottom paper bags, with or without gusset. Machine overhauled: new electrical components, new 3-phase main motor with frequency inverter, unwind station with new Renova Italy electronic brake system and dancer roller. Equipped with inline 4-color flexographic printer model IS 80, maximum print width 800 mm. Printing sleeves included: 4 x 220 mm, 3 x 320 mm, 1 x 370 mm, 1 x 380 mm, 4 x 400 mm, 4 x 430 mm, 4 x 440 mm, 1 x 520 mm, 3 x 520 mm, 3 x 580 mm, 6 x 660 mm, 3 x 680 mm. Gears: - 320 mm: 4 printing gears + 2 machine gears - 340 mm: 4 printing gears + 2 machine gears + 1 printer gear - 380 mm: 4 printing gears + 2 machine gears + 1 printer gear - 440 mm: 4 printing gears + 2 machine gears + 1 printer gear - 520 mm: 4 printing gears + 1 machine gear - 580 mm (290): 4 printing gears + 2 machine gears + 1 printer gear Djdpfjy Iclxsx Akgokn - 680 mm: 4 printing gears + 2 machine gears + 1 printer gear Forming plates: 1 x 90 mm, 1 x 120 mm, 1 x 140 mm, 1 x 150 mm, 1 x 170 mm, 1 x 180 mm, 1 x 200 mm, 1 x 240 mm, 1 x 300 mm. Note: Gluing knives for different bag widths are not included. Printer shafts/adapters: 4 printer shafts included, compatible with the printing sleeves listed above. Perforation type. Max unwinder diameter: 1,200 mm Pneumatic shaft: 70 mm Max paper width: 900 mm Min–max bag width: 70–340 mm (current owner produced only one bag size: 140 mm width x 260 mm length) Cut-off length: 190–680 mm Min–max bag length: 180–670 mm Working speed: 400–800 bags/min (depending on bag size) Suitable paper: 30–70 g/m² Machine can be inspected in operation. Immediately available.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: CK 898, total width: 2,100 mm, total length: 8,500 mm, total height: 2,300 mm, cutting length (max.): 560 mm, type of input current: three-phase, overall weight: 5,000 kg, W&H Matador 30 - CK 898 flat paper bag making machine, 1970s Brand: W&H Model: Matador 30 - CK 898 Year: 1970s Equipped with QMS 900 in-line printer (4 colors) Fitted with new printing cylinders, anilox rolls, and rubber rolls for all 4 printing stations. The electrical system has been replaced, and it features a new three-phase main motor with inverter, a mechanical and electric brake system, as well as a dedicated glue system with its own motor drive. Maximum paper width: 830 mm Maximum roll diameter: 1000 mm Inner core diameter: 70/76 mm Speed: 100–180 bags/min Forming plates: 115, 140, 190, 220, 300 mm Printing cylinders: 4 x 280, 2 x 350, 2 x 410, 2 x 480, 2 x 560 mm Dkodpoy Icv Dofx Akgsn Machine can be inspected in production Available immediately

Condition: excellent (used), Year of construction: 2016, Complete line for packing products like flour, semolina etc into small, fold top paper bags. Was installed new in 2017. Photos show the machine set-up for potatoes. Price of machine without potato weigher is EUR 25,000 Dedpfx Aettwt Askgjkn

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Dsdpfxey D T S Us Akgskn Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 2,603 h, load capacity: 680 kg, empty load weight: 3,243 kg, construction height: 2,590 mm, fuel type: diesel, total length: 3,120 mm, drive type: Diesel, construction width: 1,750 mm, working height: 10,000 mm, Scissor lift Speed class: 5.6 Technical condition: normal Djdpfx Ajyafdmjkgekn Battery condition: normal Description: The Genie GS-2669 RT is a powerful all-terrain scissor lift for working at height outdoors and on uneven surfaces. With a working height of up to 10 m, a large platform, and excellent off-road capability, this machine is ideal for construction sites, assembly, maintenance, and construction work involving personnel, tools, and materials. Robust, stable, and easy to operate. Further information and a non-binding inquiry can be found on our website - Safe working at any height. In addition to this machine, we offer scissor lifts and telescopic handlers for rent and sale. Our machines are continuously serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,152 h, load capacity: 454 kg, empty load weight: 3,447 kg, construction height: 2,590 mm, fuel type: diesel, total length: 3,120 mm, drive type: Diesel, construction width: 1,750 mm, working height: 11,960 mm, Scissor lift Speed class: 5.6 Djdpoyafdaofx Akgskn Technical condition: good Battery condition: good Description: The Genie GS-3369 RT is a powerful all-terrain scissor lift for working at height outdoors and on uneven ground. With a working height of up to 11.96 m, a large platform, and high off-road capability, this machine is ideally suited for construction sites, assembly, maintenance, and construction work involving personnel, tools, and materials. Robust, stable, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer scissor lifts and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, load capacity: 227 kg, empty load weight: 7,394 kg, construction height: 2,130 mm, fuel type: diesel, total length: 7,580 mm, drive type: Diesel, arm reach: 9,370 mm, construction width: 2,290 mm, working height: 17,590 mm, Articulated boom lift Speed class: 8 Technical condition: New Battery condition: New Dkjdpoym Hz Tsfx Akgsn Description: The Genie Z-51/30J RT is a powerful articulated boom lift for working at heights outdoors as well as on uneven terrain. With a working height of up to 17.59 m, high lateral reach, and an articulated arm, this machine is ideally suited for assembly, maintenance, and construction work, even in hard-to-reach locations or over obstacles. Robust, off-road capable, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer boom lifts and telehandlers for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from one source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,109 h, load capacity: 454 kg, empty load weight: 3,447 kg, construction height: 2,590 mm, fuel type: diesel, total length: 3,120 mm, drive type: Diesel, construction width: 1,750 mm, working height: 11,960 mm, Scissor lift Dsdpoy Ii Hpofx Akgekn Speed class: 5.6 Technical condition: New Description: The Genie GS-3369 RT is a powerful, all-terrain scissor lift for working at height outdoors and on uneven surfaces. With a working height of up to 11.96 m, a large platform, and excellent off-road capability, this machine is ideal for construction sites, assembly, maintenance, and construction work involving people, tools, and materials. Robust, stable, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer scissor lifts and telescopic loaders for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, Year of construction: 1995, CNC gantry cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Djdpfx Akjyay Dhegokn Track gauge: 7,000 mm 8 x oxy-fuel torch, type ALFA 8 x Omnilift 200 Without rail Without table Without filter 3626ä

Condition: used, Year of construction: 2010, machine/vehicle number: LC420, Used Sacmi Filling Line for Bag in Box, Up to 650 Bags/Hour Introduction to Efficiency and Precision The used Sacmi filling line exemplifies efficiency, targeting Bag in Box applications with up to 650 bags/hour capacity. Importantly, it stands ready for operation, facilitating seamless integration into production lines. Versatility in Container Handling of the Filling Line for Bag in Box Additionally, this machinery accommodates a variety of Bag in Box sizes, including 3 L, 5 L, 10 L, and if needed also for 20 L. This versatility ensures that producers can meet diverse market demands with ease. Innovative Filling Methodology Furthermore, the line employs a sophisticated gravity and light depression filling technique. Specifically, this approach is designed to handle still wine, optimizing quality preservation during the filling process. Operational Efficiency and Speed Dkjdpfx Aovvh Sujkgsn Moreover, the filling line is engineered for maximum operational efficiency. It achieves remarkable speeds of up to 650 bags per hour. Consequently, this capability supports high-volume production requirements. Adaptability to Various Formats The machine’s format adaptability is a key feature, enabling swift changes between different Bag in Box sizes. Thus, it reduces downtime and enhances production flexibility. Gravity/Light Depression Filling Advantages Additionally, the gravity and light depression method minimizes wine oxidation risks. It ensures the wine’s organoleptic properties are preserved, maintaining product quality from filling to consumption. Technical Specifications for Optimal Performance of the Filling Line for Bag in Box The filling line’s technical specifications are tailored for still wine products. The gentle filling process safeguards the wine against agitation, crucial for maintaining taste and aroma integrity. Maintenance and Operational Readiness Regular maintenance checks are essential for sustaining operational readiness. The design facilitates easy access for maintenance, promoting efficient problem-solving and minimizing potential downtime. Enhancing Production Throughput Importantly, the ability to quickly adjust to different bag sizes enhances production throughput. This adaptability is crucial for meeting varied packaging requirements without sacrificing speed or efficiency. Conclusion of the Filling Line for Bag in Box In conclusion, the used Sacmi filling line for Bag in Box applications up to 650 bags/hour represents technical excellence. Its design prioritizes efficiency, versatility, and quality, making it an invaluable asset for wine bottling operations seeking to optimize their production capabilities while ensuring product integrity.

Condition: good (used), functionality: fully functional, Year of construction: 2013, AVAILABLE FROM October 2026 Punching force: 220 kN Laser power in watts: 4000 Travel range - x: 2500 mm Travel range - y: 1250 mm Cutting capacity in structural steel: 8 mm Cutting capacity in stainless steel: 8 mm Cutting capacity in aluminum: 6 mm Workpiece weight: 280 kg Machine weight approx.: 24,000 kg Dimensions: 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Traveling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower Djdpfxey Tm Dps Akgokn - High-frequency excitation - TASC laser control etc.

Condition: ready for operation (used), Year of construction: 1987, A Haver & Boecker bagging system for valve bags with a turbine system for powdered bulk materials is available. Weighing system: gross weighing, filling material: phenolic resin, bag layers: 2-4, filling weight range: 25kg-30kg, filling capacity: approx. 150-175bags/h, explosion protection class: EEx de II C T6, pack silo height: 800mm, load cell: Z3H2-A, certification valid until 2026. Documentation available. An on-site inspection is possible. Dsdozbuvnopfx Akgjkn

Condition: ready for operation (used), Year of construction: 1990, A Behn bag filling machine for powder and flakes is available. Accuracy class: Gkl X(1), filling material: resin powder, verification: 2019, filling principle: screw filling, filling nozzle diameter: 60mm, weighing range: 2kg-32kg, scale interval: 20g, inlet diameter: 350mm, flange diameter: 520mm, machine weight: approx. 1000kg. The control system of the machine has been overhauled. Including approx. 4000 bags and spare parts for the control system. An on-site inspection is possible. Dsdpfxezbuvuo Akgskn

Condition: like new (used), machine/vehicle number: ESD EG 64/32 HG, 7000 pieces plastic crate 600x400x320mm ESD EG 64/32 HG Auer or UTZ/RAKO Used goods, in very good condition, almost new, see photos Stickers may be present on the crates, but easy to remove! Content: 66 Liters Load capacity per crate: Stacking capacity: Type: ESD EG 64/32 HG Dodpfxewl Dite Akgekn Outside length: 60 cm / inside length: 37 cm Outside width: 40 cm / inside width: 27 cm Outside height: 32 cm / inside height: 31.5 cm Stacking height (usable height inside): 30.3 cm ESD stacking containers 60x40x32cm Colour: Black Completely closed containers Dimensionally stable and robust Stackable on top of each other 40 pieces per pallet Negotiated price: € 11.00 net from stock Sale price: € 11.00 net from stock when purchasing at least 1 pallet (40 pieces) * Goods are in stock. * Transport and assembly possible on request. * Viewing always possible by appointment. * Further information on request. More than 1000 linear meters of pallet racking from various manufacturers in stock. Also 100,000 plastic containers in stock. Transport containers or for storage/grab containers. (Changes and errors in technical data, specifications and prices reserved, as well as prior sale! See our AV, all prices excl. VAT from stock).

Condition: new, power: 8 kW (10.88 HP), Year of construction: 2026, STIHL RT 4097.1 SX lawn tractor NEW / Unused * Year of manufacture: 01.2026 * Type: Ride-on mower * Power: 8.9 kW * Fuel: Gasoline * Fuel tank capacity: 9 l * Engine type: 4-stroke * Cutting width: 95 cm * Cutting system: Side discharge * Displacement: 452 cm³ Dedpfey Tz Iiox Akgokn * Power transmission: Hydrostatic * Number of blades: 2 * Height adjustment: 5 settings * Starting system: Electronic ignition * Cutting height min - max: 30 mm - 100 mm * Number of gears: 1 forward - 1 reverse, foot pedal Inspection possible during our opening hours at any time; test drive available by appointment! For export sales, a deposit will be retained, which will be refunded after receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No warranty is given for the functionality of the extras. All information is without guarantee - subject to errors, changes, typographical errors and prior sale. Vehicle descriptions are expressly not guaranteed characteristics. We refer to our general terms and conditions and request that you take note of them.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 28,246 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,600 mm, table load: 20,000 kg, overall weight: 28,000 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,000 mm Z-axis travel: 1,600 mm B-axis: 360° C-axis: 360° Spindle taper: SK 50 Rotary table (L x W): 2,500 x 2,000 mm Table load capacity: 20,000 kg Dsdpfjy R Dpkox Akgekn Tool magazine: 100 pcs. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,300 x 7,700 x 4,350 mm Machine weight: 28,000 kg Operating hours Operating hours: 75,377 h Spindle hours: 28,246 h EQUIPMENT H- / V- head

Condition: good (used), functionality: fully functional, machine/vehicle number: W&H 18499 / W&H 14623 /Garant 1723G, total width: 2,200 mm, total length: 1,30,000 mm, total height: 2,300 mm, We are offering this ready-to-use Windmöller & Hölscher Triumph 3A with QMS 992 inline 4-color flexo printing unit. - For single- or double-ply paper bags - High-bottom folding (Bodendeckblatz) - Machine is currently in production and fully operational Bag Specifications: - 1 or 2-ply paper - Bag width: 180 – 320 mm - Bag gusset: 60 – 180 mm - Bag height: up to 510 mm (610 mm cut-off / tube length) Tube length / cut-off: - 460, 490*, 500, 530*, 550*, 580*, 600, 610* mm (*each format includes 4 printing cylinders) Other formats available only without printing capability. Format plates / bag widths: - 160, 165, 170, 175, 180, 210, 230, 250, 260, 300, 320 mm Max. output (depending on bag size): 40–60 bags/min Max. roll diameter: 1000 mm / 39" Max. roll width: 102 cm / 40" Core diameter: 76 mm / 3" QMS 992 Flexo Printing Unit: - 4-color flexo printing (without doctor blade) - Max. printing length: 1000 mm / 39" We have three additional Triumph 3A machines including QMS 992 inline printing units for sale! If you are looking to produce larger bags (up to 320 x 180 x 760 mm), we would recommend a different machine from our inventory. Dkodpfx Akeyrqxajgon If you have any questions or require further information, please feel free to contact us. All machines are immediately available!

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of Cloth Bags for Dust Extractors Dimensions: Ø500 × 850 mm Designed for the following dust extractor models: Dedpfx Ajy T Hbhekgskn CORMAK FM300 CORMAK FM300S The set includes two cloth bags: one upper bag with a mounting handle for installation on the top of the dust extractor, and one lower waste collection bag.

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of 20 Foil Waste Bags for Dust Extractors Bag dimensions: 800 × 1200 mm Designed for CORMAK dust extraction systems: FM300, FM300S, FM300SA, Dedpfx Akey T E Umegekn FM500,

Condition: like new (used), The machine was used for only 10 days. Weighing range: Potatoes, onions, citrus fruits: 0.5 – 5.0 kg Carrots: 0.5 – 5.0 kg Apples, pears, tomatoes: 0.5 – 3.0 kg, 0.5 – 5.0 kg Raschel mesh bags Dkedpfoxpi I Tex Akgjn

Condition: like new (used), Year of construction: 2022, operating hours: 120 h, functionality: fully functional, The Red Rhino 7000 is a mobile (mini) jaw crusher – essentially a self-contained, movable crusher that uses one fixed and one movable jaw to crush material. Dsdpey It Tgsfx Akgokn - Crushing principle: Jaw crusher – large, wear-resistant jaws made of manganese steel. - Inlet size: approx. 700 mm × 400 mm – this is the maximum material size the crusher can handle at one time. - Capacity: up to approx. 45 tons/hour (depending on material quality). - Drive: Diesel engine (e.g., Deutz, approx. 66–70 hp, but the exact engine size depends on the specific model). - Output size: adjustable between coarse and fine (e.g., 10–120 mm), resulting in variable particle size of the crushed material. - Mobility: Tracked or rubber-tired chassis → easy to move across terrain. - Control: often via radio remote control. What is it used for? - Crushing construction waste - On-site crushing of concrete, reinforced concrete, bricks, and stones for reuse or easier handling. - Recycling