Used Cable Winch for sale (5,020)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Ledpfji Ri Hrsx Akmjhn Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, Lhedpfsk Unitex Akmsn voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 31 m³, total length: 9,090 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, saddle, and tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 king pin Curved front panel, patented 24 tons, 2-stage support winch, single-sided operation, with straight lower part, without extension compensation Lhedpfsi Rivdjx Akmon Chocks with holder Rear underrun protection, foldable Semi-shell mudguards Integrated mudguard holder, surface designed to repel stones With anti-splash flaps, only on the last axle Tarpaulin rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, color-coded lines for easy service Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connection line EBS, electronic brake system with EBS socket in the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets in the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Dump body Steel round dump body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Inside with access ladder on the front wall. Greenline - conical and aerodynamic dump body shape Shovel and broom holder on the outside of the front wall Membrane - rear wall Rear wall as a pivoting flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with toggle closures on the lower side. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with access ladder, connection plate for air/electrical and brake connections with ample space for the best possible operation. Rollover cover on one side for storage on the right-hand side, with central locking on the left-hand side Country of registration/plates Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs, black coated Dump body, RAL color of your choice, single color Rollover cover,

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5 kg, maximum load weight: 29 kg, overall weight: 35 kg, axle configuration: 3 axles, total length: 13,990 mm, total width: 2,550 mm, tire size: 385 / 65 r 22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, semi-trailer, forwarding company Steel welded construction in reinforced design, only 2 longitudinal beams as double T-beams with steel/diamond plate between the longitudinal beams, kingpin plate with 2 interchangeable kingpins. Mudguard for taillights. 1 steel storage box, recessed between longitudinal beams 8 pairs of lashing eyes screwed or welded to the frame, as per manufacturer's choice 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation 2 support wedges with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-shell mudguards with anti-splash flaps according to EG 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 8 pieces of timber rack brackets, as per manufacturer's choice, screwed to the frame with 2 extendable timber racks each, from 1800 to 2800 mm, 7 tons per pair Axles + Suspension SAF disc brake axles with 430 mm disc diameter Air suspension with lifting and lowering valve, safety cable on the axles 1st axle automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Offset axle spacing mm (combined transport) up to 44 tons total weight Wheels and tires 385 / 65 R 22.5 as per manufacturer's choice Steel rims, factory silver Braking system Lhedpfx Asi Rivwskmjn 2-line pneumatic braking system Spring-loaded parking brake Axle load detection via EBS-Canbus signal, for display on the screen in the driver's cab, the truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of ABS! Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connection cable Front panel/corner posts at the front Steel/lattice front panel, approx. 2,300 mm high, screwed to the frame Approval / Signs Country of approval: Germany Type approval according to EG 2007/46 prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Support feet black coated Front panel hot-dip galvanized Note: Archive images! Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,800 mm, loading space width: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ---- New German vehicle: ABS, ESP * Central locking with FFB * Wide mirrors Lsdpfx Akotw Nudsmehn * Radio with Bluetooth * Cable winch * Trailer coupling * Payload approx. 1,300 kg. Full aluminum platform: * "Sport" body variant, platform arranged at an angle to the driver's cab * Body 4800 x 2100 mm. incl. middle floor + loading ramps * Trailer coupling + connection socket * Side aluminum profile painted in the same color as the chassis * Aluminum frame made from C-profile * Loading floor made from aluminum profiles * Aluminum loading ramps * Trailer coupling 2,500 kg. Trailer load * Storage box for tensioning straps * Light bar carrier painted in the same color as the chassis * Light bar * Optional: LED work lighting integrated into the side of the loading floor * Optional: Trailer type Modello, 550x205, 3500kg, price on request Load securing is also available from us: * Tensioning and lashing straps * Locking bars * High visibility vests * Transport boxes * Edge protection * Storage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size on any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodies - Complete vehicles - Trailers - Advice - Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: used, mileage: 1,78,613 km, power: 118 kW (160.44 HP), first registration: 06/2010, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 10/2028, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, Internal vehicle number: G170470 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The auxiliary battery needs to be replaced. Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 06/2010, registered as a self-propelled working machine, green license plate - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer under the frame - Reinforced shock absorbers - Roof and rear door, tall version - Auxiliary hot air heater - Rotating beacon, yellow, front left/rear right - Rear door, two-wing, 270 degrees Lhsdozpcx Ejpfx Akmjn - Mileage: approx. 178,613 km TV inspection system - RCA proline with satellite - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel jib with winch for lowering the camera/carriage - 1 carriage L 135 for main pipes DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional lighting, halogen, inclination measurement, and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G170470 * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), mileage: 1,33,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster - Remote-controlled central locking - Refrigerator - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Toolbox - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Front axle 1: steered Front axle 2: steered Rear axle 1: steered Ljdpfx Akszr Ht Eemohn Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm Lhjdpfxezz Rpce Akmen - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Lhsdpfxjz Agv Uo Akmon - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Lhedpoz Agw Eefx Akmon - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Lodez Ag Rrspfx Akmjhn - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, manual winch Equipment: - 12 tie-down points - Approach angle 11.5° - Spare wheel Net price: €5,621.85 / Gross price: €6,690.00 Article number: IMO227461900.11 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 462 x 194 x 0 cm • External dimensions (LxWxH): 641 x 200 x 100 cm • Loading height of the floor: 60 cm • Permissible total weight: 2,700 kg • Unladen weight: 685 kg • Payload: 2,015 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION Lhjdpfx Akezy Dfnjmon • Freely adjustable bracket for ALKO 901 manual winch • Includes ALKO 901 manual winch with steel cable • Full aluminum floor, with anti-slip coating • 1 adjustable wheel chock • Very stable steel frame welded • Tilting loading platform by means of manual hydraulics + 2 lifting cylinders • Loading platform 394 cm + 68 cm ramp • Side panels color: black • Wheel stop bar / Tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Additional longitudinal struts fully welded • 12 tie-down points inside the loading platform, rubber coated (750kg/each) • Spare wheel mounted under the loading platform • Reverse drive automatic • ALKO inertia coupling and parking brake • ALKO coupling head • Very stable V-drawbar, REINFORCED • 13-pin plug • Reversing lights • Large-sized safety lighting • Swiveling LED rear lights • Integrated rear fog light • Lighting can be swiveled • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any desired modifications! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transport license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, electric winch Equipment: - Loading angle 11.5° - Spare wheel - 14 lashing eyes Net: €8,025.21 / Gross: €9,550.00 Article number: IMO230502000.21 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • Initial registration: without initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 502 x 209 x 0 cm • External dimensions (LxWxH): 670 x 215 x 100 cm • Loading height of the floor: 60 cm • Permissible total weight: 3,000 kg • Unladen weight: 820 kg • Payload: 2,180 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Electric winch • Freely adjustable bracket • Handheld remote control with cable • 12V battery under the loading area in the box • Battery is charged via the 13-pin connector from the towing vehicle, provided the socket is fully occupied. • Solid aluminum floor, with anti-slip coating Lhjdpfxszy Dgfo Akmon • 1 adjustable wheel chock • Very stable steel frame, welded • Tilting loading area by means of manual hydraulics + 2 lifting cylinders • Loading area 434 cm + 68 cm approach ramp • Side panels color: black • Wheel stop bar / lashing eyes color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members for high point load • Additional longitudinal struts continuously welded • 14 lashing eyes within the loading area, rubber-coated (750kg/each) • Spare wheel mounted under the loading area • Reversing automatic • ALKO overrun device and parking brake • Coupling head ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Swiveling LED taillights • Integrated rear fog light • Lighting swivels • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, electric winch Equipment: - 14 tie-down points - Spare wheel - Loading angle 13° Net: €8,949.58 / Gross: €10,650.00 Article number: IMO235542000.21 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 542 x 209 x 0 cm • External dimensions (LxWxH): 725 x 215 x 100 cm • Loading height of the floor: 66 cm • Permissible total weight: 3,500 kg • Unladen weight: 950 kg • Payload: 2,550 kg • Chassis: Low loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • electric winch • freely adjustable mounting bracket • hand-held remote control with cable • 12V battery under the loading platform in the box • Battery is charged via the 13-pin connector from the towing vehicle, provided that the socket is fully occupied. • Full aluminum floor with anti-slip coating • 1 adjustable wheel chock • very stable steel frame welded • tilting loading platform by means of manual hydraulics + 2 lifting cylinders • loading platform 474 cm + 68 cm ramp • Side panels color: black • Wheel stop bar / tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • many stable cross members for high point load • additional longitudinal struts continuously welded • 14 tie-down points inside the loading platform, rubber-coated (750 kg/piece) Ledpfx Akozy Dxusmohn • Spare wheel mounted under the loading platform • Reversing automatic • ALKO overrun device and parking brake • Coupling head ALKO • very stable V-drawbar REINFORCED • 13-pin connector • Reversing light • large-sized safety lighting • swiveling LED rear lights • integrated rear fog light • swiveling lighting • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask for specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: used, mileage: 12 km, power: 132 kW (179.47 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, color: other, number of seats: 3, loading space volume: 21.3 m³, loading space length: 4,230 mm, loading space width: 2,310 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, soot filter, traction control, Simple air conditioning, central locking with automatic locking, electrically adjustable exterior mirror on the passenger side, heated exterior mirrors, traffic sign recognition, driver fatigue detection, cruise control, speed limiter, leather steering wheel, heated steering wheel, spare wheel winch, windshield wipers with rain sensor, daytime running lights, fog lights with cornering lights, analog radio + DAB, 7-inch color touchscreen, hands-free system, Apple CarPlay via USB, Android Auto via USB, tire pressure monitoring system, tinted windows, driver airbag, passenger airbag, ABS, dynamic stability control, driver's seat with adjustable backrest and lumbar support, start/stop system, particulate filter, service booklet available, steel rims 6J16ET68, electric power steering, emission standard Euro 6E, 2.0-liter diesel engine B22LUC, 6-speed manual transmission, truck chassis with extended cab, Opel Movano X250 MCA, body color White Icy, wheelbase 4,035 mm, lower storage compartment, alcove with hood, GSR V2.1, starter motor STTD, roof antenna + digital, drive with internal combustion engine, anti-slip control, indirect tire pressure monitoring with localization, exhaust system on the left side, EOBD self-diagnosis, automatic braking in case of collision, standard battery, manually adjustable passenger seat, automatic activation and switching of lighting, standard roof, ceiling light with door operation, cup holder, left-hand drive, manually adjustable driver's seat, standard chassis, private mode, 90-liter fuel tank, reinforced rear suspension with double leaf springs, gray steel rims, 16-inch steel wheels, remote control with central locking, 92 MHz remote control, standard windshield, 6-speed transmission C637, standard headlights, LCD instrument cluster with text display, battery cable preparation, closed single cab, refrigerant R1234yf, front headrests, diesel, country program Poland, driver's armrest, electric control, traffic information, traffic sign and speed limit recognition, generator class 22, engine type B22, 4G telecommunications, brake assistant, heavy payload 16Q, normal fuel consumption optimization, steel suspension, radio controls on the steering wheel, European radio frequency, hubcaps, tires 215/75 R16 116R, improved repairability, standard rearview mirror, interior mirror day/night, halogen lamps, high-frequency remote control with main key, transmission of vehicle data, passenger double seat, driver's seat, voice recognition via smart device, telematics control unit TBM, stop-and-start system, standard front bumper, spare wheel holder, axle ratio 15 x 73, USB ports 1x USB-C + 1x USB-A, continuous side protection strips, preparation for Visio Park 1 with camera, recommended gears, jack, chrome-plated ventilation nozzles, painted radiator grille, seat belt warning indicator, AUX connection/audio package with USB-C, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank; we will be happy to advise you. This offer is non-binding; no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. We will also take your old vehicle in part exchange. Retrofitting of: - Trailer couplings, also up to 3500 kg possible - Auxiliary heaters - Screen for reversing camera and/or navigation via mobile phone (Android Au Lodpfszum Rcex Akmehn

Condition: used, maximum load weight: 31,100 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2013, Year of construction: 2013, Equipment: ABS, * Faymonville F-S43-1ABA low-loader * First registered: 03-2013 * Hydraulic lift Lhsdpfxozq N N Hs Akmjn * Hydraulically adjustable double-folding gooseneck * Includes cable winch with remote control * 3rd axle with trailing linkage * SAF axles * Air suspension * Drum brakes * Payload: 10,900 kg * Net weight: 31,100 kg * Gross vehicle weight: 42,000 kg * Tires 235 / 75 R 17.5 * More pictures and videos available via WhatsApp * Specifications subject to change without notice; sale subject to prior sale.

Condition: used, mileage: 31,388 km, power: 160 kW (217.54 HP), first registration: 11/1992, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1992, Equipment: ABS, all wheel drive, navigation system, M-Benz 1224 4x4 RW2 Fire Engine VIN: 5569873 Vehicle ID: 1151324 ????? ????? ??? ????? ?? ????? Chassis / Components: Ledpfx Ajzxvg Iskmjhn * Wheelbase: 3,600 mm * Leaf spring suspension * Tires: 10 R 22.5 * Tire tread depth: Front ~90%, Rear ~80% * 1x Diesel tank * Winch, 60 m / 13mm cable * Trailer coupling Cab: * 3-seater * 2x Rotating beacons Body: * Metz RW2 * Crane type: D20SE * Rotzler winch, 60 m * Lighting mast, 6 m * Generator Engine / Transmission: * 11,309 ccm // 218 hp / 160 kW * 5-speed * Differential lock * Power take-off Weights: * Gross vehicle weight: 12,000 kg * Unladen weight: 8,500 kg * Payload: 3,500 kg Other: * German vehicle * Rescue saw (for metal and glass) New inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export / transit license plates; furthermore, we can arrange for the transportation of your purchased vehicles within Germany. Contact us! ----We speak the following languages: German, English, and Russian! ----No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. All rights reserved! ----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day passes / Export license plates We will gladly assist you in obtaining export license plates / short-term license plates. Processing of customs formalities We will gladly assist you in handling customs matters.

Condition: used, mileage: 1,86,000 km, power: 92 kW (125.09 HP), first registration: 05/2013, fuel type: diesel, maximum load weight: 1,080 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro5, number of seats: 7, loading space length: 3,150 mm, loading space width: 2,100 mm, Year of construction: 2013, - Used FORD TRANSIT 350 truck, double cab with 7 seats, - 35 quintals (3.5 tons) gross vehicle weight, twin rear wheels, 10.8 quintals (1.08 tons) payload. Registered in 2013, 2200cc TD engine, 125 hp, Euro 5, 6-speed gearbox, 186,000 km. - Cantoni brand three-way tipper body (external dimensions: 3150 x 2100 mm). Front support for poles, 2 cable winches, protective nets for rear lights, reinforced rear leaf springs. - Equipped with air conditioning, radio, electric windows, central locking, ABS, ESP, TCS, spare wheel, two sets of keys. - Bodywork repainted, interior in good condition, mechanics in good condition. Front tires: 75% tread, rear tires: 75% tread. Single owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM, Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM. - Certified mileage. - Road test possible by appointment. - Transfer of ownership can be carried out on site. - Customized financing options available. Carlo Mauri Srl disclaims any responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual commitment. Prices are quoted excluding VAT and transfer of ownership costs. Lhsdpfeyy Rgnox Akmjn

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Ledsw Eqdqepfx Akmehn Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, mileage: 60,048 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: ABS, * Special equipment: * Wiedemann & Reichhardt BASIC 1000 Type 11.5-360 Vario superstructure, suction and jetting vehicle, former municipal service vehicle. * 3.0 m³ water / 8.0 m³ sludge, piston in front position * Vessel tube, lid, and base made of stainless steel * Stainless steel baffle plate mounted on sludge tank * Combination unit with telescopic piston, suction hose reel, high-pressure hose reel mounted on a boom with electronic pressure and speed control and display readout * ARCON radio remote control * High-pressure pump: Uraca Type P3-45-60 (Plunger 60 mm, 346 l/min, 205 bar drive power 130 kW, drive speed 1500 rpm), 3,421 operating hours * Vacuum pump: Wiedemann KW 2000 (2000 m³/h) with 4,395 operating hours (liquid ring pump) Lhedpfxsxvfxhs Akmjn * Liquid ring pump - power consumption 50 kW, speed 1300 rpm * Liquid ring pump coupled with a pre-charge pump for temperature-dependent water circulation * Suction and high-pressure boom (swivel reel with 2 high-pressure hose reels, which can be operated individually, simultaneously, or synchronously) * Centrally mounted boom for optimal working range on both sides * - hydraulically swivels approx. 180° * - hydraulically telescopes approx. 1,200 mm * Hydraulic cable winch mounted on boom, lifting capacity 250 kg * Suction hose 25 m DN 125 * High-pressure hose reel 200 m DN 25 * Small high-pressure hose reel 80 m DN 13 * Length counter for high-pressure hose * Manhole above tank DN 500 * Hydraulic tilting tank approx. 1 m for maintenance and repair work * Hydraulic oil tank with 80 L capacity * 5 sight glasses on tank lid * Water filling on both sides with level indicator * BEKA-MAX centralized lubrication system for superstructure only, pump type troni X1, runtime 1.5 min or 20 cycles, pause time 4h * Accessories (various nozzles, suction hose DN 125, hose guides, spare parts (cardan shaft, valves, hoses)) * Handwash basin in the right front equipment cabinet, 20 L capacity, with swivel tap and fill unit * Boxes right and left at the rear, approx. 50 L, for storage of return pulleys, nozzles, etc. * Work floodlight (spotlight for shaft illumination), mounted on the boom, with 15 m cable and cable reel * Various work spotlights mounted on both sides of the superstructure * Rotating beacon on the boom and driver’s cab * Holder for manhole hooks at the rear incl. 2 hooks * 2 spring-tension cable reels * Large equipment cabinets mounted to the right and left of the water tank (illuminated), approx. 50 cm deep, aluminum doors opening upwards, gas struts with top locking * Wardrobe positioned over the high-pressure pump with lighting, ventilation slots, and water drain at the bottom * Extendable vice with bracket to the right * Rockinger SK 5 towing coupling * Front axle load 9.5 t * Raised exhaust pipe on right * Exterior mirrors electrically adjustable and heated * Wide-angle mirror with electric maneuvering assistance * Kerb mirror on the right, adjustable and heated * Rear axle differential lock * Air horns on driver's cab roof (2) * Cab: with 2 rear wall windows, tinted * Cab: with air suspension * Flame start system * Toggle brake (EVBec controlled) * Middle seat * PTO NMV 221, i=0.98 n=1470 rpm * Cab socket 12V and 24V * Control module for external data exchange * Additional high/low beam and fog lamps with cornering light * Further equipment: * Reversing camera * Turning camera * Axle configuration: 6x2/4 * Steered trailing axle * Wheelbase 3,600 mm + 1,350 mm * Frame over...

Condition: used, mileage: 3,18,871 km, power: 320 kW (435.08 HP), first registration: 09/2007, fuel type: diesel, empty load weight: 18,700 kg, maximum load weight: 13,300 kg, overall weight: 32,000 kg, axle configuration: 8x2, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: air, number of seats: 2, loading space length: 6,800 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, crane, cruise control, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, soot filter, trailer coupling, * German vehicle * Condition, see photos * Original only 318.871 Km. * Hiab 377 E-6 HiPro loading crane foldable at the rear * FlyJib 70-X4 * Hook height 30 m * Rotzler TC1 cable winch * 26.00 m = 510 kg * 22.20 m = 630 kg * 19.00 m = 770 kg * 16.00 m = 1,660 kg * 13.80 m = 1,940 kg * 11.70 m = 2.360 kg * 9.70 m = 2,940 kg * 7.90 m = 3,750 kg * 6.10 m = 5,100 kg Lsdpfsvhpifjx Akmshn * 4.40 m = 7,500 kg * 3.20 m = 10,000 kg * Radio remote control * 5th + 6th control circuit * 4 hydraulic outriggers * Platform body with aluminum loading flaps * Aluminum floor * High bulkhead * DIN lashing eyes * Trailer coupling * Towing capacity: 24,000 kg * Cab with air conditioning * Multifunction steering wheel * Retarder * Cruise control * Telligent manual gearbox with clutch pedal * Hill start assist * Radio CD navigation * Hands-free system * Comfort driver's seat, air suspension * Seat heating * CB radio * Rotating beacons * ABS and ASR * Full air suspension * 1st + 2nd +4th axle steered * 4th axle liftable * Differential lock * Sun visor * Body dimensions: L=6,800 x W=2,550 x H=1,000 mm * Wheelbase: 1,100 + 3,900 + 1,350 mm * GVW: 32,000 kg * Payload: 13,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Lhedpsv Si Szsfx Akmen Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), functionality: fully functional, machine/vehicle number: WMA56EZZ9NM900210, mileage: 22,661 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, empty load weight: 21,535 kg, maximum load weight: 4,465 kg, overall weight: 26,000 kg, tire size: 385/65 R 22,5 u. 315/80 R 22,5, axle configuration: 6x6, wheelbase: 4,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2021, loading space volume: 5 m³, loading space length: 3,800 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, cable winch, crane, cruise control, differential lock, navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, Vehicle number # 30103 Euro 6 D TN cab with 1 berth 6 x 6 all-wheel drive Wheelbase: 4,500 mm Leaf suspension Tyres: 386/65 R 22.5 and 315/80 R 22.5 Flatbed body (internal dimensions): 3,800 x 2,480 x 600 mm (front wall 1,300 mm) 390-litre fuel tank Differential lock Mechanical 8-speed splitter gearbox Air conditioning Parking heater PTO (power take-off) Cruise control Traction control FASSI loading crane F 455 RA 2.26 JIB L 214 Mech. boom extension PL 21 Cable winch type V20 4-way hydraulic outriggers Lsdpfsv U Abnex Akmohn Front stabilizers Air-suspended driver's seat/heated MAN Multimedia System Advanced Navigation system electric windows (2x) Electric exterior mirrors/heated Reversing camera MAN BrakeMatic 3-stage engine brake Fifth wheel coupling AHK Rockinger Duomatic/Standard Diesel particulate filter Sun visor Beacon lights Roof hatch LED daytime running lights Work lights 5 pairs of lashing eyes 4x large toolboxes 2x small toolboxes Headlight range adjustment Multifunction steering wheel On-board computer RIO-Box Off-road reduction gear ABS Offroad Hill-holder brake Roller blind left Drum brakes Lease purchase or financing available on request!

Condition: used, mileage: 4,33,520 km, power: 235 kW (319.51 HP), first registration: 08/1980, fuel type: diesel, overall weight: 24,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, total width: 2,500 mm, total height: 3,900 mm, Equipment: all wheel drive, crane, Mercedes-Benz 2632 Roofer Crane HMK 6x6 Suspension: Leaf-leaf Wheelbase: 3.20 m Type: HMK 340 T Year: 1988 5x hydraulic extension 4x hydraulic outriggers 1x remote control 1x work platform 1x cable winch Equipment: - Engine brake - Tachograph disc - 1x bed - Radio cassette - Tow bar Lodpfx Akoyw A T Ismjhn We are also happy to assist you with financing/leasing through our partners. All information provided without guarantee. Subject to error and prior sale.

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Lhsdpfslthguex Akmjn Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app