Used Combination Air Filter for sale (31,983)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic Itodpfx Acezu Aiboaek - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 966 h, MAZAK OPTIPLEX NEXUS 3015 FIBER - 4 kW Itodpfxsy Dgxuj Acask CNC Fiber Laser Cutting Machine Price: EUR 190,000 net Condition: Used – VERY LOW OPERATING HOURS Resonator: IPG YLS-4000 U VERY LOW WORKING HOURS The machine has exceptionally low operating hours. The IPG resonator and critical components are in near-factory condition: - Practically full remaining lifespan of the IPG resonator (rated for up to 100,000 h) - Minimal wear on the optical system, Multi-Control Torch 2.1 head, and linear guideways - Cutting quality and precision comparable to a new machine - Operating hours confirmed by CNC readout – documentation available upon request or during inspection TECHNICAL SPECIFICATIONS Model: Optiplex Nexus 3015 Fiber Laser Type: Ytterbium fiber laser Resonator: IPG YLS-4000 U Laser Power: 4.0 kW Max. Sheet Size: 1,525 x 3,050 mm Max. Pallet Load: 930 kg Travel (X/Y/Z): 3,100 / 1,580 / 150 mm Rapid Traverse (X/Y): 60 m/min (85 m/min combined) Drive X1/X2/Y: Rack & pinion, direct-drive Drive Z: Servo, ball screw Accuracy X/Y: ±0.05 mm / 500 mm Repeatability: ±0.03 mm Head: Multi-Control Torch 2.1, F125-F200 mm Assist Gases: O2, air, third gas; 0.02–2.5 MPa CNC: Mazatrol Preview G, 19" touchscreen Pallet Changer: Automated, 2-pallet Weight: Approx. 12,850 kg Power: 380–480 V, max. 18 kW CUTTING CAPACITY (4 kW) Mild steel O2: 20 mm Mild steel N2: 4 mm Stainless steel N2: 15 mm Aluminum N2: 15 mm Copper O2: 8 mm Brass N2: 8 mm INTELLIGENT FUNCTIONS (INCLUDED) Automatic nozzle changer (8 nozzles), auto focus positioning, focus detection, auto profiler calibration, auto nozzle cleaning, beam diameter control, pierce/plasma/burn detection, fine power ramping, flash cut. SCOPE OF DELIVERY (INCLUDED IN PRICE) Cast-iron frame (foundation-free installation), Mazatrol Preview G CNC 19", Multi-Control Torch 2.1 head with 8-position nozzle changer, OPTIPOD module, automatic 2-pallet changer, chiller with 6 m hoses, cutting nozzles 1.2/2.0/3.0 mm plus 5 adapters, laser edge detection, numerical gas pressure control, multi-tap transformer, slatted table (100 mm spacing), tools, documentation (PL/EN). OPTIONAL EQUIPMENT – NOT INCLUDED The laser system can be purchased separately for EUR 190,000. Options below are available at additional cost. OPTION A – PRESSURE-BOOSTING UNIT – EUR 15,000 net Allows cutting with compressed atmospheric air instead of expensive nitrogen, greatly reducing operating costs. Components: 1. Compressor SK 25 / max. 15 bar / SK.2-13318 2. Condensate Drain Ultramat UFM-D03 3. Economizer Ultra-Filter DF 0035 - DF 1100 4. Ultra-Filter DF 0035 - DF 1100 5. Pressure vessel, 500 l Air cutting capacity: mild steel up to 6 mm, stainless up to 4 mm. OPTION B – SHEET LOADING CRANE – EUR 5,500 net Sheet loading crane, lifting capacity up to 700 kg. Enables safe and quick loading of sheets onto the laser pallet. PRICE SUMMARY (NET, EUR) Machine only: EUR 190,000 Option A (pressure unit): EUR 15,000 Option B (loading crane): EUR 5,500 Total with both options: EUR 210,500 COMMERCIAL TERMS - All prices are net, in EUR (VAT not included) - Offer valid for 30 days - Payment and delivery terms to be agreed - Inspection and test cutting available by appointment

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Itedop S Tlhopfx Acajk Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2021, condition: used, Empty weight: 400 kg GVW: 400 kg Serial number: 211214-098983 Capacity: 20 levels Cooking modes: Convection, steam, and combination cooking Steam generator: Yes Temperature range: 30 °C to 250 °C (preheating up to 300 °C) Controls: Touchscreen Functions: * Hot air cooking * Steam cooking * Combination cooking * Regeneration * Low-temperature cooking * Delta-T * Cook & Hold * ClimaOptima® (automatic humidity control) * SmartChef® (automatic programs) Itsdpfjzvb Ixex Acask * CombiWash® (automatic cleaning) Dimensions (W × D × H): 1,122 × 951 × 1,877 mm Total weight: 400 kg Online auction held following the closure of the Umiami research and development center in Villebon-sur-Yvette (91), which was dedicated to the development of plant-based food products under the "Swap Food" brand. This auction includes over 100 lots, notably featuring state-of-the-art laboratory and process development equipment: “Anton Paar” particle size analyzers and rheometers, a “Stable Micro Systems” texturometer, “Dohmeyer” cryogenic cabinets, “Hounö” and “Unox” ovens, a “Mettler Toledo” metal detector, an “Anritsu” checkweigher, "Sartorius" thermobalances, as well as numerous food preparation appliances, laboratory equipment, stainless steel furniture, shelving, computer equipment, and technical equipment. Auction organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: reconditioned (used), operating hours: 425 h, functionality: fully functional, overall weight: 410 kg, fuel type: gasoline, HAKO JONAS 980 V SWEEPERS NEW AIR FILTER The machine has only 425 hours of operation. A new wire roller brush combined with new side brushes provide excellent sweeping results. New 12V 52Ah starter battery. Built-in warning light. A high-performance dust extraction turbine and new dust guards around the main brush prevent fine dust and debris from being raised after sweeping. The machine has a large debris flap for collecting larger debris. The machine has undergone a thorough overhaul. Operating fluids and parts such as bearings, drive belts, and dust guards have been replaced. Each machine we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: Jonas 980 V Engine: Gasoline Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7200 Sweeping speed (km/h): 6 Tank capacity (l): 60 (2x30) Filter area (m²): 3 Dimensions (L x W x H) 1500 mm x 1000 mm x 1330 mm Machine weight, ready to use (kg) ~ 410 INCLUDED: NEW AIR FILTER NEW cylindrical brush - PPL bristles + ACC (Wire) NEW side brushes - PPL bristles + ACC (Wire) NEW starter battery 12V 52Ah NEW roller guards Built-in warning light Dust bins (2 x 30L) KEY FEATURES: The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The Jonas 980 V sweeper is the perfect machine for efficient, economical sweeping HAKO JONAS 980 V SWEEPERS NEW AIR FILTER The machine has only 425 hours of operation. A new wire roller brush combined with new side brushes provide excellent sweeping results. New 12V 52Ah starter battery. Built-in warning light. A high-performance dust extraction turbine and new dust guards around the main brush prevent fine dust and debris from being raised after sweeping. The machine has a large debris flap for collecting larger debris. The machine has undergone a thorough overhaul. Operating fluids and parts such as bearings, drive belts, and dust guards have been replaced. Each machine we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Itsdpfx Acsztvrtjaek Model: Jonas 980 V Engine: Gasoline Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7200 Sweeping speed (km/h): 6 Tank capacity (l): 60 (2x30) Filter area (m²): 3 Dimensions (L x W x H) 1500 mm x 1000 mm x 1330 mm Machine weight, ready to use (kg) ~ 410 INCLUDED: NEW AIR FILTER NEW cylindrical brush - PPL bristles + ACC (Wire) NEW side brushes - PPL bristles + ACC (Wire) NEW starter battery 12V 52Ah NEW roller guards Built-in warning light Dust bins (2 x 30L) KEY FEATURES: The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The Jonas 980 V sweeper is the perfect machine for efficient, economical sweeping of multi-story parking lots, warehouses, production buildings, and outdoor areas. Petrol power ensures high flexibility. The large working width (1200mm) ensures high surface coverage. A clearly legible and intuitive control panel.of multi-story parking lots, warehouses, production buildings, and outdoor areas. Petrol power ensures high flexibility. The large working width (1200mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 22924, Exhaust Air Dust Extraction System Ijdpfxjv Scfus Acastk Dimensions of suction unit: Length: 1,100 mm Width: 1,100 mm Height: 1,950 mm Dimensions of filter housing: Diameter: 900 mm Height: 1,400 mm Dimensions of control cabinet: Width: 400 mm Height: 600 mm Depth: 300 mm The exhaust air and dust extraction system has already been dismantled and is ready for collection.

Condition: used, mileage: 2,55,584 km, power: 140 kW (190.35 HP), first registration: 03/2018, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 35 m³, loading space length: 6,050 mm, loading space width: 2,500 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Vehicle No. for customer inquiries: 160 ----Special equipment: * Air conditioning * Speed limiter (cruise control) * Tail lift DHollandia 1,000 kg * Engine brake * Cargo area dimensions: L: 6,050 mm W: 2,500 mm H: 2,370 mm * Payload: 2,141 kg * Rear cross member * Trailer socket ABS * Trailer coupling preparation (air/electric) * Anti-slip control (ASR) * Exterior mirrors, electrically adjustable and heated, wide-angle mirror heated * Battery disconnect switch, mechanical * Co-driver's bench seat * Curb mirror, right, electrically adjustable and heated * Brake connection, 2 lines on the rear of the frame * Differential lock, rear axle * Electronic stability program (ESP) * Driver's seat, comfort, air-suspended * Flame start system * Sliding roof, mechanical * Underrun protection, front Iedpfjzviu Hox Acaotk * Central locking ----Standard equipment: * Axle configuration: 4x2 * Approach/front mirrors * Anti-lock braking system (ABS) * Safety belt indicator, left * Audio system: MAN basic Line radio * Exterior mirror, wide-angle, left * Exterior mirror, wide-angle, right * On-board computer MAN-Tronic * Compressed air connection, front * Electronic braking system MAN-Brakematic * EURO 6 engine * Cab: C (Compact) * Suspension: leaf spring/air * Power windows * Windshield, tinted * Generator 28 V 80 A * Transmission, 6-speed - Type: ZF S6 - 800 OD * Rear axle HY-0718 * Body/superstructure: chassis * Fuel filter, heated * Fuel tank: combination tank, plastic - 100 liters diesel + 10 liters urea solution (AdBlue) * Steering column (steering wheel), adjustable * Air intake, elevated, dry air filter behind the cab * Engine 4.6 liters - 140 kW diesel * Engine brake * Radio preparation 24V * Wheelbase 4200 mm * Spare wheel carrier behind the rear axle * Disc brake, rear axle * Disc brake, front axle * Mud flaps, front * Side windows, tinted * Stabilizer, rear axle * Bumper, plastic * Door windows, tinted * Underrun protection, rear * Viscous fan * Front axle VOK-05, curved * Permissible gross weight 8.00 t ----Technical data: * Wheelbase: 4,200 mm * Cargo area dimensions: L: 6,050 mm W: 2,500 mm H: 2,370 mm * Payload: 2,141 kg * Tire size: 215/75 R17.5 * Tire tread: approx. 50% - 80% ----German vehicle! * 14,850.- Euro net plus VAT * MOT/emission test (TÜV) valid until 02/2027 * If exported to third countries or the EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing possible even in difficult cases * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense of the term. * The information does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently convince themselves of the condition and equipment of the vehicles before purchase. * Price changes, typing errors, errors and prior sale are reserved. * Dear customer, please understand that due to the age and mileage of the vehicle, we prefer to sell it to commercial businesses or dealers.

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 31 m², Dust extraction unit, chip extractor, self-cleaning filter, vacuum, pneumatic ALKO MOBIL JET 300 The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is positioned on the clean air side, minimizing explosion risk. The unit is additionally equipped with a fire protection system. Perfectly suited for wide belt sanders and all types of dry dust in various technological processes – filtration bags can be replaced to suit specific requirements and applications. Fan power: 7.5 kW Capacity: 6000 m3/h Isdpfxjy Rz T Hj Acajtk Vacuum: 2400 Pa Nozzle diameter: 300 mm Air return Automation for direct start from machines. Stock no.: 1131

Condition: excellent (used), Air filter -Type: 6.0690.16.7.0110 -Quantity: 8 pieces available -Price: per piece Iodpfx Aob A Iwljcajtk

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar Itsdpfx Asyzaamscajk

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: Itedpfx Aozubtljcaek • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Itodpfx Aozizz Sscaek Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, suitable for nitrogen Iedpfjzu Nqfox Acastk all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, overall weight: 8,000 kg, spindle motor power: 21 W, Equipment: chip conveyor, Spinner 5-axis simultaneous machining center used for training purposes and demonstrations. Therefore, in very good condition. Control system: Heidenhain TNC640 Work area: 630 x 530 x 465 mm (X-Y-Z) Rotary table diameter: 650 mm Iedpfx Acszvcwneastk Inline spindle: 15,000 rpm / HSK63 / 21 kW Tool magazine for 54 tools Direct measuring systems in all axes Chip conveyor High-pressure coolant through the spindle: 70 bar, with strip filter system Air through the spindle

Year of construction: 2025, condition: like new (used), Almost NEW Compact filtering unit mod. FC320 for sale! ADVANTAGES: 1. Negative pressure 2. Fire extinguishing system by powder 3. Rotary valve 4. Pulse air sleeves cleaning 5. Extra low noise 6. Waste extraction to big bags. The filtering unit mod. FC320 is studied and realized for an efficient filtration in less space. Its compact and thin line makes it suitable to be placed in every area, also inside productive areas. Thanks to an accurate design it is reliable, silent and easy to use. EXTRACTION AND FILTERING GROUP 1. Nr.1 filtering unit mod. F320 built in galvanized steel sheet, with dimensions 3500 x 1100 x (h) 4300 mm, running in negative pressure and equipped with nr. 60 antistatic polyester filtering bags with dimensions Ø125 x (h) 1300 (filtring area= 60 m2, grammage= 500 g/m2), with cleaning system by countercurrent compressed-air blasts (ON-LINE). The filter is complete with: · Nr.1 tangential inlet to avoid the direct contact of the waste with the filtering bags, making the filter last longer; Nr. 1 motorized screw conveyor, equipped with a proper motor gearbox, for the discharge of the filtered material towards the opening in the lower hopper; · Nr. 1 kit for Big-Bag installed under the hopper, complete with rotary valve and level probe for the control of the filling level of the bag; · Nr.1 high-performance fan, designed to run with clear air, equipped with a premium branded Class S1, IP55 code electric motor with a power 7,5 kW; · Control panel for the management of the fan and the cleaning system; Model FC320 Dimensions[mm] 3500 x 1100 x (h) 4300 Installed power [kW] 7,5 - 400v/50Hz Exhaustion system Into a big-bag Filtering bags dimensions[mm] Ø 125 x (h) 1300 Filtering material Antistatic polyester Number of bags 60 Grammage [g/m2] 500 Filtering surface [m2] 60 Sleeves cleaning system Automatic cleaning system with compressed air Air Flow 6000m3/h Ijdpfx Acezi Uqmjajtk 1. Instruction and maintenance manual of the filtering unit; 2. Filtering unit conformity declarations with CE marking; 3. Nr.1 automatic fire protection system, composed of: • Nr.1 powder extinguisher; • Diffusing tube with nozzles; • Polymeric tube for fire detection (to be filled with 18 bars nitrogen); • Alarm pressure switch;

Condition: used, mileage: 2,53,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 11/2016, emission class: euro6, color: white, number of seats: 9, Year of construction: 2016, total length: 6,961 mm, total width: 1,993 mm, total height: 2,612 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, For sale is a well-maintained Mercedes-Benz Sprinter 316 MAXI with the globally popular 2.1-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 standard * First owner * Service booklet available * M1 passenger car registration * VAT can be shown separately Equipment: MAXI version Itedpfxozvlbco Acaok * Air conditioning front + rear * 7 seats (up to 9 seats possible) * Auxiliary heater * Multifunction steering wheel * Electric step * Passenger airbag * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2580 KG * Payload: 920 KG * Towing capacity: 2000 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer plates (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally cleaned and hygienically spotless! The special features: Disinfection of the interior and ventilation system by means of ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone a thorough maintenance service. Of course, this includes new fluids, filters and other expenses that you don't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on Special equipment: Ashtray in the passenger compartment, Equipment package: Cabin Comfort, Audio system Audio 15 (radio with color display), Two-way speakers front and rear, Folding cover for storage compartment, Interior paneling in the loading/passenger compartment, Luxury, Additional heater (hot water), Remote control for additional heater, Roof control unit with reading spot driver/passenger side, Fleece battery 95 Ah, Outside temperature display, Additional main key, Heated rear window, Rear door (opening angle 270 degrees), Steering wheel with multifunction including trip computer, Parameterizable special module, Spare wheel in road tire, Spare wheel holder under frame end including jack, Interior mirror, Mud flaps rear, Mud flaps front, Seat equipment: Isofix child seat system, Seat equipment: Comfort headrest, Driver's seat, Seats in the loading/passenger compartment: 1st row, 3-seater bench, narrow, Comfort headrests passenger compartment, Stabilizer rear, Stabilizer front reinforced, Start/Stop system engine, Fuel gauge for auxiliary heater, Step rear door, Front axle reinforced, Additional heater Additional equipment: 3rd brake light, Storage compartments: luggage net on rear doors, Storage net on front seat backrest left, Storage net on front seat backrest right, Adaptive brake light, Airbag passenger side, Airbag driver side, Display for windshield washer fluid level, Exterior mirrors elect. adjustable and heated, both, Exterior mirrors with integrated turn signal, Floor group combination version, Brake system with ABS+ASR, Roof lining, Roof lining in the driver's cab, Window for rear doors, Window

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz Itjdpfsyy U Shox Acaok User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Year of construction: 2022, operating hours: 427 h, condition: like new (used), functionality: fully functional, The extraction unit is from 2022 and has only 427 operating hours. It is therefore immediately ready for use and in excellent condition—see pictures. The price is gross (3,500 EUR net); you will receive an invoice with VAT shown separately. The mobile LOCTITE extraction system LAS 250 is a key component for health and environmental protection at the workplace. Molecules released by adhesives in their liquid phase are captured directly at the workstation, cleaned by the extraction unit via a special activated carbon filter system, and then the purified air is returned to the workspace. This reliably prevents air pollution in the work area and ensures compliance with workplace air quality regulations. Thanks to its low weight and mobility, the LOCTITE extraction system can be easily transported to different workstations. Features: - Special fan with high pressure reserve - Adjustable flow volume control Itodpfx Acexy Spzoajk - Suitable for up to 4 workstations - Filter combination with special activated carbon - Filter cartridges are recycled upon return - Built-in operating hour counter to monitor filter element life

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. Itedjzvb E Depfx Acaok - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops)

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Iodpeyvuvljfx Acastk

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Iedpfxsy Tiaae Acastk Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1.811-943.0, high-pressure hose length: 45 mm, pressure: 230 bar, fuel: diesel, power: 6.8 kW (9.25 HP), temperature: 95 °C, For sale is a well-maintained and fully functional Kärcher HD 1000 DE hot water high-pressure cleaner, manufactured in 2020, from our commercial cleaning business. The machine is in good used condition and is ready for immediate use. It has been thoroughly cleaned and serviced before sale. The engine oil and the oil of the high-pressure pump have been replaced, and the air filter has been cleaned. The high-pressure cleaner features a robust Yanmar diesel engine and a diesel-fired hot water generator. The high-pressure pump, engine, and hot water operation function perfectly. An operating hour meter is not installed on the machine, therefore, operating hours cannot be specified. Reason for sale: The machine is being sold solely because we have now installed an equivalent hot water high-pressure system permanently in one of our vehicles. Therefore, this mobile unit is no longer needed. Inspection and a detailed test run under operating conditions are possible and expressly encouraged after scheduling an appointment. Technical data Manufacturer: Kärcher Model: HD 1000 DE Article number: 1.811-943.0 Year of manufacture: 2020 Drive: Yanmar diesel engine Displacement: 435 cm³ Engine power: 6.8 kW at 3,600 rpm Working pressure: approx. 190 bar Max. pressure: 230 bar Flow rate: 15 l/min (900 l/h) Max. water temperature: 98 °C Burner output: 59 kW Weight: approx. 197 kg Operating hours: not readable / no operating hour meter available Itjdjztut Aopfx Acajk Extensive Kärcher accessories included The machine is sold as a complete, ready-to-use package: * Kärcher EASY!Force Advanced high-pressure gun * High-pressure lance with pressure regulation * Kärcher EASY!Lock system * 30 m high-pressure hose * additional 15 m high-pressure hose * coupling to connect both hoses - allowing up to 45 m hose length * Rotating nozzle / rotor nozzle * Flat spray nozzle * Kärcher eco!Booster TR 50 * integrated hose reel Especially the combination of the 45 m high-pressure hose, EASY!Force Advanced, and the different nozzles makes the machine interesting for larger areas and professional applications. Maintenance performed before sale: * Engine oil replaced * High-pressure pump oil replaced * Air filter cleaned * Machine completely cleaned * High-pressure function tested * Hot water / burner function tested * Functional test performed The machine is in perfect technical condition and ready for immediate use. Suitable for, among other applications: Commercial cleaning, facade cleaning, industrial and hall cleaning, construction companies, agriculture, agricultural machinery cleaning, municipal services, and other professional high-pressure and hot water cleaning tasks. Location: 45966 Gladbeck, North Rhine-Westphalia Inspection and test run: Possible and expressly desired after prior appointment. Sale by a commercial enterprise. An invoice with VAT will be issued.

Condition: ready for operation (used), Year of construction: 2020, Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible. Itedpfx Acoxl Upbsaek

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Itodpfx Ajzukv Necaok Capacity: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines Itedpfxjzu Rpio Acask a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).