Used Continuous Cycle Presses for sale (19,719)

Condition: excellent (used), Year of construction: 1994, Clamping unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of stages: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2 x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Piston 2 diameter: 60/40 mm Weight, approx.: 16 t Hydraulics: Pressure setting: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 at 300 bar Drive power: 22 kW Tank dimensions (L x W x H): 1,000 x 770 x 535 mm Prsdpfxezw E E Rj Abpea Closing speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing stroke: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Pjdpfx Aszw E E Dobpjra Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Available starting September/October. Operating hours: Laser: 35,000 hours. Prodjzn N Hgopfx Abpea

Condition: excellent (used), Year of construction: 1998, Hours: approx. 45,600 6 axles Predpfx Abszniq Espea Location available upon request.

Condition: used, Year of construction: 1983, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 13130B, color channels: 4, paper weight (min.): 55 g/m², paper weight (max.): 400 g/m², paper width (min.): 17 mm, paper width (max.): 51 mm, paper height (min.): 20 mm, paper height (max.): 71 mm, total length: 10 mm, total width: 3 mm, total height: 3 mm, space requirement length: 10 mm, space requirement width: 3 mm, space requirement height: 3 mm, year of last overhaul: 2000, type of input current: three-phase, input voltage: 220 V, Features: Prjdpfx Abozv Rq Njpea High-stack delivery Air angle adjustment Additional cooling unit with electronically adjustable water control Automatic plate clamping bars Additional cylinders Total impressions: 63,100,000 The machine is currently in operation.

Condition: good (used), Swing diameter over the carriage 225 mm Pjdpfezwpkkex Abpora Center height over the bed 260 mm Carriage length 520 mm Carriage width 215 mm Spindle bore 72 mm Chuck diameter 175 mm Spindle diameter in the front bearing 100 mm Drive power 22 kW Spindle speed 20-4000 rpm Tailstock diameter 80 mm Tailstock travel 100 mm Tailstock arbor MK4 Distance between centers 600 mm Bed width 320 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning BendMaster: - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg - Floor-mounted track, welded construction with stable guide rail - Travel range 3215 mm - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal - Network connection Pedpfezwla Uox Abpjra - Remote service via the Internet

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_5, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included Prsdpfx Aezwngksbpoa 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. Pjdpjzt H U Sofx Abpora The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. Psdpszt H N Asfx Abpjra The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Prodpfx Aozt H Nvsbpsa Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, Year of construction: 2013, operating hours: 17,000 h, functionality: fully functional, I am selling a Challenger LT-42 / Microcut LT-42 industrial CNC lathe, manufactured by Buffalo Machinery Co. Ltd. – Taiwan, recognized for its reliability, rigidity and precision in production. Model: Challenger LT-42 / Microcut LT-42 Manufacturer: Buffalo Machinery Company Limited (Taiwan) Year of manufacture: 2013 Power supply: 400V / 3 phases Installed power: 20 KVA Technical specifications: Maximum turning diameter: 210 mm Maximum turning length: 460 mm Bar capacity: 42 mm Spindle speed: up to 6000 rpm Hydraulic chuck: 6” / 3 jaws X-axis travel: 215 mm Z-axis travel: 520 mm Rapid speed X/Z: 30 m/min Main motor: 11 / 15 kW Inclined bed: 30° heavy-duty Features: Automatic turret manual pulse generator Hydraulic chuck Adjustable hydraulic quill Automatic lubrication System cooling Pjdpozwgzasfx Abpora CE Robust construction, ideal for continuous production High precision and reliability Made in Taiwan Suitable for workshops and factories looking for a serious CNC lathe Well maintained machine Can be viewed and tested

Condition: good (used), functionality: fully functional, Very robust and heavy-duty mechanical knee-lever press made of cast iron. Converted to electric heating, 230V/50Hz. Podpfx Abjzuwv Nspora Approx. 850 kg. Pressing area: 40x45 cm.

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm Psdpfx Abjtqqq Repjra dayligth 400 mm total power requirement 15 kW dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK

Condition: used, throat 750 mm punch diameter max. 75 mm max. sheet metal thickness 4 mm weight of the machine ca. 250 kg dimensions of machine L x W x H 1,41 x 0,75 x 1,47 m Pedpfxotqqp Sj Abpjra max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm

Condition: used, Year of construction: 1997, machine/vehicle number: 150069, Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Prjdpfxouqdhwj Abpja Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton Standard configuration electrical overload protectionpneumatic clutch2 connecting rodsPLC Siemens S5 Extended machine accessories Strip shear AI 40max. shear force 10tSheet thickness max. 4 mmSheet width max. 400 mmCross section 600 mm2 Automation Kaiser Feeder KWV 400max. sheet width 400 mm

Condition: as good as new (ex-display), This pellet press, a machine for producing wood pellets, is being auctioned off in our industrial auction/machine auction as part of a stock clearance, warehouse sale – including individual and demonstration units – online. Prodpfx Ajzv Runsbpsa You can find this and many other items on our platform.

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, punching force: 200 t, drop-through hole in table: 220 mm, ram bore: 60 mm, stroke adjustment: 180 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates by force generated through an eccentric mechanism in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type 200 Ton Eccentric Press is engineered for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for high-volume production. Key Advantages: - Consistent stroke performance and high repeatability in mass production - Operator-focused safety design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Application Areas: - Cold cutting and punching operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-way guided slide • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot control system • Mechanical safety system Predpsvtyx Ijfx Abpoa • Emergency reverse motor operation • Complies with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD control panel (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set in requested specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Tons Throat depth: 340 mm Distance between table and slide: 500 mm Distance between slide and table: 600 mm Width between uprights: 510 mm Slide adjustment (shut height adjustment): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchoring dimension: 920 mm Side anchoring dimension: 1420 mm Table hole diameter: Ø240 mm Table dimensions: 680×1000 mm Die clamping hole diameter: Ø60 mm Slide dimensions: 620×350 mm Table height from floor: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 9200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: used, Paper drilling machine, Hang 106 DTK4, $ spindle drilling machine, with various drill bits, 2 different speeds. In good condition. If you are interested, we would also be happy to provide you with information about other machines we have in stock. You are welcome to inspect the machine at our premises after arranging an appointment in advance. Prsdpfx Abjzwdg Tjpoa

Condition: used, Year of construction: 2018, operating hours: 6,765 h, functionality: fully functional, HSM VK 4812P channel baling press, year of manufacture 2018 Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Operating hours: 6765 Pressing force: 48 t Drive power: 15 kW Total power: 18 kW Feed opening: 1020 x 1250 mm (W x L) Capacity: 50 kg/m³: 7.5 t/h Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Psdpfx Abszwnclspera Tying: 4-fold, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (L x W x H) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, film Note: The press has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, For sale is an R. Beck multi-level gluing press in a robust industrial design. This machine is ideally suited for efficient carcass, frame, and panel construction, as well as for a wide range of gluing applications in carpentry and furniture making. The 5 independently operated press levels allow for the simultaneous processing of multiple workpieces, resulting in high productivity. Technical data: Prjdpfxozm Slve Abpsa Manufacturer: R. Beck Maschinenbau Year of manufacture: 1997 Usable length: 2,000 mm 5 press levels Operating pressure: 6 bar CE version Machine no.: 270 Equipment: Pneumatic multi-level gluing press 5 press levels, individually selectable Pneumatic pressing Multiple clamping cylinders per level Even pressure distribution Control panel with individual control of the press levels Mobile base frame Robust industrial design Ideal for carcass, frame, and panel gluing Application areas: Furniture manufacturing Carpentry Joinery Carcass gluing Frame gluing Panel gluing Series production Condition: The machine is in used, well-maintained condition with the usual signs of wear and tear consistent with its age. Thanks to its robust construction, it is ideally suited for professional use in crafts and industry. Inspection and test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 1990, ONLY numbering unit from a GTO 46 or 52. Available for both machines. The image is a sample photo. Can be purchased as a package or as individual parts. Predpfxszv U Uro Abpea If you are interested, we will also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility after prior arrangement of an appointment.

Condition: used, Year of construction: 1982, Heidelberg GTO 46, 1 color, standard dampening system, +Version. 33 x 46 cm. Psdpjzv U Uljfx Abpsra If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our premises, subject to prior appointment.

Condition: used, Year of construction: 2000, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 64 - 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Standard configuration Maximum material thickness: 10 mm Prsdpfx Abszwfqaopsa Extended machine accessories including roller feedincluding waste-cutting shears Automation Straightening unit, model RLM 25-SMaterial width 50–250 mmMaterial thickness 6–10 mmNumber of straightening rollers: 5Diameter of straightening rollers: 88 mm Decoiler USM 2000 AS Coil weight: 2 tonnesCoil outer diameter: approx. 1,500 mmCoil inner diameter: approx. 508 mmMaterial width: 50–250 mm

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening Pedpfoztpa Rjx Abpera – central lubrication – additional safety covers – hard sheet metal for pressure