Used Curtain Rack Trolley for sale (6,463)

Year of construction: 2020, condition: used, FISCHER – Cantilever racking for installation in enclosed spaces. The racking must not be clad on-site without consulting FISCHER. Design according to the specifications. Racking No. 1 - single-sided (cantilever arms bolted on). Number of racks: The following information refers to 1 rack. 1 unit Number of uprights: 3 units Racking length (center-to-center distance): 2,500 mm Distance between uprights: 2 x 1,250 mm Upright height (hole pitch 100 mm): approx. 2,500 mm Top storage level: 2,200 mm Foot length: 1st side/2nd side 2,000 / 0 mm Cantilever arm lengths (total length incl. end stop): 2,000 mm Cantilever arms: 1st side/2nd side 4 / 0 units Desired load capacity per cantilever arm: 500 kg Load capacity per upright side (without considering the foot): 2,000 kg Max. floor pressure: 0.11 kN/cm2 Shipping weight per rack: 607 kg Crodpfxezab Rce An Uec Color of uprights: fire red, similar to RAL 3000 Color of cantilever arms: fire red, similar to RAL 3000 1 spray can The profile thickness applies to 100% utilization of the rack load capacity. Seismic zone could not be determined. A verifiable or tested static analysis is available for an additional charge. Text for the static calculation: Important note regarding the static calculation of the storage system: The static calculations take into account the fundamentals according to Eurocode (DIN EN 1991-1-1, DIN EN 1991-3 and DIN EN 1991-1-4) and the framework conditions of the respective national annexes (NA) applicable in the countries where the system will be installed. Since storage systems are usually installed in urban or industrial areas, the requirements applicable to these areas (e.g., for Germany, ground category III and IV) are included in the calculation. Important note regarding building permits, please note: Storage systems may require a permit according to the respective state building code. In the event of an order placed with Fischer, the client undertakes to obtain the necessary public-law permits for the storage system. If the permit is not granted, or the granted permit is revoked or withdrawn, the contractor shall not be liable for this. In the event of installation by Fischer, we generally assume that a valid building permit is in place at the time of installation. Any necessary verifiable static calculations for the building application can be obtained for a fee; please contact us. Cantilever racking: 1 unit 1,500.00 Foot rounding as a safety element: 3 units 13.50 per foot and side Storage location: Customer

Condition: used, Colour: Grey Empty weight: 1.500 kg Length: 550 cm Price: On request Cjdpszba Enefx An Ujrc - Documentation available: No - CE certificate present: No - Type of rack: Double - └ Load capacity per side [kg]: 3000 - Number of uprights [pcs]: 10 - Number of beams [pcs]: 80 - Total load capacity per upright [kg]: 3000 - Load capacity per arm [kg]: 1000 - Arm length [mm]: 1220 - Upright height [mm]: 5500 - Foot length [mm]: 1220 - Width between uprights [mm]: 1500 - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Colour: Grey Empty weight: 4.350 kg Length: 552 cm - Documentation available: No - CE certificate present: No - Type of rack: Single - Number of uprights [pcs]: 26 - Number of beams [pcs]: 87 - Total load capacity per upright [kg]: 3000 - Load capacity per arm [kg]: 1000 - Arm length [mm]: 1220 - Upright height [mm]: 5520 - Foot length [mm]: 1220 - Width between uprights [mm]: 1500 - Transport weight [kg]: 4350kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Csdeza Ubzopfx An Usrc Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Colour: Grey Empty weight: 1.650 kg Length: 402 cm Crjdpfx Anoza Ubue Uec Price: On request - Documentation available: No - CE certificate present: No - Type of rack: Double - Number of uprights [pcs]: 11 - Number of beams [pcs]: 44 - Total load capacity per upright [kg]: 4000 - Load capacity per arm [kg]: 1000 - Arm length [mm]: 1220 - Upright height [mm]: 4020 - Foot length [mm]: 1220 - Width between uprights [mm]: 1500 - Transport weight [kg]: 1650kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 1,600 mm, load center: 600 mm, mast type: simplex, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), empty load weight: 250 kg, total height: 2,030 mm, total length: 1,642 mm, total width: 740 mm, color: yellow, Equipment: pallet forks, A mast trolley with a lifting capacity of 2000 kg is a versatile device used for unloading delivery vehicles as well as for work in warehouses and shops. Its solid construction ensures long service life, while the polyurethane wheels provide quiet and trouble-free operation. Technical Specifications Load capacity: 2000 kg Lifting range: 85–1600 mm Fork length: 1150 mm Mast type: single mast Overall height: 2030 mm Height with forks raised: 2030 mm Overall length: 1642 mm Fork outer width: 550 mm Overall width: 740 mm Net weight: 250 kg Number of wheels (front/rear): 2 / 2 Wheel and roller material: polyurethane Steering wheel dimensions: 180 × 50 mm Roller dimensions: 75 × 70 mm Load center: 600 mm Fork width: 160 mm Fork height: 60 mm Fork inner width: 390 mm Adjustable fork spacing: Yes Cjdpfsytcmrsx An Ujrc Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Should you be interested in other machines please visit our website.

Condition: used, Colour: Grey Empty weight: 1.650 kg Crsdpfx Aneza Tc De Usc Length: 552 cm Price: On request - Documentation available: No - CE certificate present: No - Type of rack: Double - Number of uprights [pcs]: 11 - Number of beams [pcs]: 66 - Total load capacity per upright [kg]: 6000 - Load capacity per arm [kg]: 1000 - Arm length [mm]: 1220 - Upright height [mm]: 5520 - Foot length [mm]: 1220 - Width between uprights [mm]: 1500 - Transport weight [kg]: 1650kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Colour: Grey Empty weight: 1.650 kg Length: 503 cm Price: On request Crsdpfjza Tcwjx An Uoc - Documentation available: No - CE certificate present: No - Type of rack: Double - └ Load capacity per side [kg]: 4000 - Number of uprights [pcs]: 11 - Number of beams [pcs]: 88 - Total load capacity per upright [kg]: 8000 - Load capacity per arm [kg]: 1000 - Arm length [mm]: 1220 - Upright height [mm]: 5030 - Foot length [mm]: 1220 - Width between uprights [mm]: 1500 - Transport weight [kg]: 1650kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, Catalog number: S0367 TECHNICAL DATA dimensions of the work table: 800x800mm motor power S1/S6: 3.0 / 4.4kW Credpfx Ansy Tlquo Uoc diameter of the hole in the table: 190mm spindle diameter: 30mm spindle tilt: 0° -45° spindle speed: 1400 / 3500 / 6000 / 8000rpm rotation: right, left vertical spindle travel: 175mm working height of the spindle: 125mm max. tool diameter for profiling / for tenon machining: 180/250mm diameter of the extraction nozzle: 120mm dimensions L/W/H: 2800x1800x1090mm weight: 410kg – machine is new – tilting spindle – with side table Net price: 17200 PLN Net price: 4100 EUR, depending on an exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Technical details: Number of drawer: 6 Stück tool holder: 36 Stück Dimensions (HxWxD): 930x710x650 mm weight: ca. 20 kg Crodpfsu Nkyljx An Uoc The trolley is for tool holders SK40 or/and SK50 on sale without tools or taper *

Condition: used, Technical details: : 4 St. taper: der tools: SK 40 dimensions L x W x H: ca. 0,6 x 0,75 x 1,16 m Very well maintained tool trolley made of pipe construction, screwed with tools. Codpfeu Nkzcsx An Ujrc The tool holders are plugged in and removable. The trolley is mobile, with 4x wheels, 2 of them are fixed and 2 wheels are steerable with parking brake. Handrails above the trolley. The tools shown in the pictures may vary! *

Condition: excellent (used), functionality: fully functional, Model: Compact 1.10 R-Evolution Tunnel kiln for 1 car with IQTouch Control system Cjdpfx Asyv Uw Ajn Ujrc Energy-efficient & easy to maintain Rotary kiln (car rotating) Water connection for misting Connection 400V Used kiln

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, carrying capacity per cantilever arm: 700 kg, PROFESSIONAL CANTILEVER RACKS FOR WOOD, TIMBER, BEAMS AND PROFILES For sale is a complete set of professional cantilever racks used for storing structural timber, KVH, BSH, beams, lumber, boards, pipes, and other long elements. The set includes: • 9 frames of cantilever racks for indoor use, • 15 frames of outdoor cantilever racks complete with a full roof (storage shed). Csdpfx Aszbi Hnen Uerc The racks were used throughout their service life for storing structural timber in a factory producing prefabricated houses. The construction is solid, stable, and designed for storing large quantities of material with significant length and weight. Key advantages: ✓ quick access to the material without the need to move it, ✓ possibility of sorting the material by cross-sections and lengths, ✓ load capacity of a single arm up to 700 kg, ✓ high load-bearing capacity of the structure, ✓ space-saving in the storage area, ✓ ideal solution for sawmills, timber yards, manufacturers of prefabricated houses, construction companies, and joinery workshops. The outdoor racks are equipped with a roof that effectively protects the stored material from rain and excessive sunlight. The system being sold is an actual storage system that has been in operation at the production facility, not individual elements from a dismantled system. It is possible to sell the entire system or individual sections after prior agreement. It is possible to view the racks on site and learn about their current usage. For detailed dimensions, load capacity information, and pricing, please contact us.

Year of construction: 2015, condition: used, Exhibit Csdpfx Asv Dat Ton Ujrc Storage location: Sonnefeld

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Codpfx Anjv Dauwo Uorc Storage location: Nattheim

Condition: used, Colour: Grey Empty weight: 2.850 kg Length: 450 cm - Documentation available: No - CE certificate present: No - Type of rack: Single - Number of uprights [pcs]: 19 - Number of beams [pcs]: 38 - Total load capacity per upright [kg]: 2000 - Load capacity per arm [kg]: 1000 - Arm length [mm]: 1250 - Upright height [mm]: 4500 - Foot length [mm]: 1200 - Width between uprights [mm]: 1500 - Transport weight [kg]: 2850kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Crodpfxszaq Spo An Usc Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, Catalog number: H0531 – new machine, in stock – tiltable spindle – with side trolley – CE certificate – DTR documentation in Polish Crsdpjy S Aa Rofx An Usc TECHNICAL DATA spindle diameter 30mm spindle stroke 100mm max spindle diameter 180mm spindle adjustable at an angle of -5+45 degrees table dimensions 1000x360mm sliding table 1000x250mm 4 types of speeds 1800, 3000, 6000, 9000 U/min engine power 2.8kW/3.9kW exhaust nozzle diameter 100mm dimensions length/width/height 1150/1155/730mm weight 270kg PRODUCT FEATURES Milling machine lower spindle - table FS 200SF is a massive construction with a table top made of grey cast iron with a high-quality gauge mounted to hold the processing element and high precision of adjustment. The price includes a milling machine with a sliding side carriage. FS 200SF with a tilting spindle is a device with a wide 4-step speed range: 1800/3000/6000/9000 It is successfully used for processing the edges of straight-line elements and for creating decorative strips, grooves, projections, tenons and dovetails The welded steel body and large cast iron table make it a very solid and stable machine, not susceptible to vibration A precise formatting table included Net price: PLN 14,100 Net price: EUR 3,350 Net price calculated according to the exchange rate of PLN 4.2 / EUR (in the event of greater exchange rate fluctuations, the price may change)

Year of construction: 2024, condition: like new (used), functionality: fully functional, Freezer trolley Uni Universal for sheets 60x40/78x58 stainless steel version 4 new castors/wheels Dimensions: W 660 x D 410 x H 1725 mm 20 floors Used device cleaned Visit our large bakery machines sales warehouse! Cjdoil Atwjpfx An Uerc

Year of construction: 2024, condition: like new (used), functionality: fully functional, Stainless steel trolley Stainless steel cabinet for sheets 40x60 3 sides closed front with door Cabinet mobile Used device cleaned Credjil Hfqopfx An Ujc Come to our large bakery machines sales warehouse!

Condition: used, mileage: 5,60,000 km, power: 125 kW (169.95 HP), first registration: 08/2017, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,000 mm, total width: 2,400 mm, total height: 3,360 mm, loading space length: 4,400 mm, loading space width: 2,350 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch with our sales consultant quickly and easily. Please note: Sales are preferably made to commercial businesses. Internal ID number: [3370] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (technical inspection) & emissions test * Nationwide delivery * Financing possible, even without a down payment * Spring offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (depending on the vehicle and manufacturer). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * 2nd owner * Accident-free * Maxi platform body + cover (length = 4,400 mm / width = 2,350 mm / height = 2,300 mm) * Total weight = 3,500 kg / payload = 1,100 kg * Trailer hitch = 3,500 kg * Air conditioning * Cruise control * 6-speed manual transmission Special equipment: Storage package, audio system: radio with CD player, MP3-compatible, USB and Bluetooth hands-free system, body manufacturer interface, exterior mirrors, long, for vehicle width 2350 mm, roof storage compartment with DIN compartment, rear axle suspension: parabolic (reinforced, level 2), fire extinguisher bracket, automatic climate control, fuel tank: 90 liters, cooling compressor 170 ccm, spare wheel in driving condition, spare wheel holder between the floor longitudinal members, mud flaps at the front, seats in the cab: driver's seat comfort (hydraulic) Additional equipment: Airbag for driver, trailer socket preparation, anti-slip control (ASR), design: S-series, exterior mirrors electrically adjustable and heated, brake assistant, electronic brake force distribution, front axle suspension: transverse leaf spring, windshield and side windows tinted, generator 150 A, body/superstructure: standard platform, instrument cluster with pixel matrix display, headlight range adjustment, engine 3.0 L - 125 kW diesel with catalytic converter, radio preparation with speakers, wheelbase 4100 mm, low emissions according to emission standard Euro 5, seats in the cab: double passenger seat with headrests, maintenance indicator, permissible total weight 3.5 t ----Do you want to lease or finance? We offer attractive deals - even without a down payment! Please contact us. Contact: Telephone: Credpfx Aney U Tnqs Ujc E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 AM - 6:00 PM Sat: 9:00 AM - 2:00 PM ----Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. The binding condition of the vehicle is determined exclusively by the purchase contract on site or by written assurances. We prefer to sell vehicles with a mileage of more than 50,000 km or older than 3 years to our commercial customers.

Condition: good (used), 7x pallet transport racks, Lützenkirchen – used - : Price per unit: €395 (net), dismantled, packaged, and loaded! Manufacturer: Lützenkirchen Lagertechnik GmbH Cedpfx Anew Acrus Ujrc Type: / Year of manufacture: not specified Load capacity: not specified Quantity: 7 Dimensions: L76cm x W60cm (54cm effective) x H30cm Condition: good Available: immediately Location: 04720 Döbeln

Condition: good (used), Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights, individual uprights, bracing profiles, shelf panels, shelves, shelf boards Credpfx Aor U Sgwen Ujc -Storage rack: Steel uprights and wooden shelves in various sizes -Shelf stands: Dimensions 1990 x 500 mm (10 Euro net) 1 pc. / 2992 x 500 mm 5 pcs. (12 Euro net) -Shelf units: 1000 x 500 mm 194 pcs (5 Euro net) / 1000 x 600 mm 168 pcs (6 Euro net) -Weight: Stands 5.4 to 8.4 kg/pc. / Shelves 5.6/6.3 kg/pc.

Condition: good (used), Workshop trolley, 400kg load capacity – used - : Price per unit: €550 (net) Manufacturer: unknown, probably Fetra Model: unknown Year of manufacture: unknown Load capacity: 400kg 2 fixed castors, 2 swivel castors Wooden worktop with 3-sided edge 4 drawers 1 cabinet door Wooden top width: approx. 1.20m Depth: approx. 69cm Height incl. worktop: 93cm Length with handle: approx. 1.30m Width of steel frame: 1.04m Cabinet door width: approx. 46cm Cabinet door height: approx. 56cm Drawer width: approx. 43cm Drawer depth: approx. 55cm Condition: good Available: immediately Crjdpfx Anex El Has Ujc Location: Frankenberg / Saxony warehouse

Condition: good (used), Year of construction: 2013, Approx. 200 bays of wide-span shelving / compartment shelving, SSI Schäfer, with steel shelves – used – : Price per bay ex location: Now only €99 instead of €225 (net), dismantled, packed, and loaded! Additional single beams: €5 (net) / each Price per bay without steel shelves ex location: €225 (net), dismantled, packed, and loaded! Additional single beams: €5 (net) / each Manufacturer: SSI Schäfer Type: Carton flow rack (converted) Year of manufacture: 2013 Csdpevxh Arsfx An Usrc Each bay with 3 shelf levels! Frame width: approx. 6 cm Frame depth: approx. 85 cm Beam height: approx. 6 cm Steel shelf dimensions: Depth: approx. 76.5 cm, width: approx. 30 cm, height: approx. 2 cm, qty approx. 130 pcs Depth: approx. 76.5 cm, width: approx. 20 cm, height: approx. 2 cm, qty approx. 76 pcs Bracing beam: height approx. 6.5 cm Available frame heights: Rack height: approx. 2.20 m Depth: 85 cm No. of frames: 288 pcs Rack height: approx. 2.50 m Depth: 85 cm No. of frames: approx. 145 pcs Available bay widths: Clear bay width: 1.80 m Beam with edge for steel shelves: 180 cm – 58 pcs Beam without edge (like a pallet rack – also ideal for chipboard panels): 180 cm – 344 pcs Clear bay width: approx. 2.20 m Beam with edge for steel shelves: 220 cm – 7 pcs Beam without edge (like a pallet rack – also ideal for chipboard panels): 220 cm – 237 pcs Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 2019, condition: good (used), approx. 560 pieces shelves for racking system / Berger, type Bert, 1m and 1,30m x 0,50m, 150kg, different - used - : Price per shelf: 9.-€ (net)! Credoil H Naepfx An Usc Minimum purchase: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of manufacture: ca. 2019 Depth: 50cm width: ca. 1,30m = 540 pieces Width 1m = approx. 20 pieces Height: approx. 4cm Load capacity: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: immediately Location. Frankenberg / Saxony

Condition: new, Year of construction: 2022, Saw blade rack for carbide saw blades from 6” (150mm) to 26” (660mm) Csdpjhq Rkhsfx An Uorc Length: 26” (660mm) Width: 9” (230mm) Height: 7” (180mm) Weight: 16lbs (7.3 kg) Capacity: 35 Blades