Used Cut Tech Machine Company Compact for sale (72,782)

Condition: good (used), Year of construction: 2016, functionality: fully functional, Duplo DC-746 Multi Finisher / Card Cutter Minimum sheet size: 210 x 210 mm Maximum sheet size: 370 x 670 mm Materials from 110 to 350 g/m² Hedpezbrvfsfx Anvjnn Speed: Up to 50 sheets Good condition Available from July

Condition: used, Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: G300L321302, cutting length (max.): 3,200 mm, type of input current: three-phase, input current: 32 A, input voltage: 208 V, table width: 1,800 mm, table length: 3,200 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer a Zünd L-3200 machine, type: paper cutting machine, year of manufacture 2022. Product: Cutter G3 Type: L-3200 Year of manufacture: 2022 Serial number: G300L321302 Hjdpjymdb Dofx Anvsnn Country of origin: Switzerland Voltage: 208/400 V AC 3-phase Current: 32 A Frequency: 50–60 Hz If you have any questions or require additional information, please send us a message or contact us by phone. The complete specification is available upon request. The machine is practically new (1000 hours).

Condition: used, Year of construction: 2008, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2008 Control : Sonstige Movement X/Y/Z : 550/350/400 mm Workingspace: Movement in X/Y/Z:550/350/400 mm Movement in U/V:550/350 mm Table size:900 x 600 mm Workpiece dimensions (max.):1.200 x 700 x 400 mm Load capacity (max.):1.500 kg Dielectricheight (min./max.):0/435 mm Clearance angle (max.):+/- 45°/400 mm Generator: Technology:ISOPULS-Doppelquellengenerator Cutting speed:400 mm²/min Finest arbitration:0,20 μm Ra Wire: Standard diameter:0,25 mm Wire guiding:Closed diamond guides Equipment/Accessory: Tankcapacity:1.200l Dielektrikum Dielektrikumsmanagement I:Filtercartige Dielektrikumsmanagement II:Chiller, Eckert Setup operations:Electronic Handwheel Workpiececlamping:Clampingjaw, EROWA Further Accessory:Misc. Electrodeholder, clamping devices and Erodingwire Hodpfjzbzb Rox Anvenn : Attention:The displayed Deionisationsfilters are not included in our offer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 38,762 h, machine/vehicle number: A1240A0214, laser power: 4,000 W, sheet thickness (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Sheet thickness (max.): 15 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 10 mm Sheet thickness aluminum (max.): 15 mm Table length: 4,000 mm Table width: 2,000 mm MACHINE DETAILS Laser type: CO2 laser Laser source: TruFlow 4000 Laser power: 4,000 W Power: 77 kW Dimensions & Weight Dimensions: see dimensions in images Total weight: 16,000 kg Hnedozdp Agjpfx Anvsn Type of cooling: Water Operating hours Operating hours: 78,203 h Laser hours: 38,762 h EQUIPMENT Cooling unit

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 78,203 h, control type: CNC control, controller manufacturer: Trumpf, laser type: CO₂ laser, laser hours: 38,762 h, laser power: 4,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 15 mm, table length: 4,000 mm, table width: 2,000 mm, working width: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, power: 77 kW (104.69 HP), type of cooling: water, overall weight: 16,000 kg, year of last overhaul: 2025, Equipment: cooling unit, We offer this Trumpf Laser TruLaser 3040 (L32) laser cutting machine, model TruLaser 3040, in very good condition, year of manufacture 2012. Trumpf Laser TruLaser 3040 (L32), CO2 Laser Year of manufacture: 2012, used by the first and sole owner from new Cutting unit power: 4kW Table dimensions: 2x4 [m] X-axis: 4000 mm Y-axis: 2000 mm Z-axis: 115 mm Maximum sheet thickness: Hnsdpfjy Rxnuox Anven - Mild steel: 15 mm - Aluminium: 15 mm - Stainless steel: 10 mm Weight: 16,000 kg Rated power: 77kW Closed-circuit cooling system Good condition: optics and resonator system overhauled (2025) and conveyor belt replaced (2026), machine serviced under Classic contract (every 6 months) by authorized Trumpf service Operating hours: laser beam - 38,762 h, machine - 78,203 h CNC control Machine number: A1240A0214 Location: Inowrocław, Poland Price without VAT For any questions or if you need more information, please send a message or contact us by phone. Tel. +48 722 151 062

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Object of sale: 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Hnedpfxoqmm D So Anven Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 60,120 h, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Amada, laser type: CO₂ laser, laser source manufacturer: FANUC AF 4000 E, laser hours: 60,120 h, laser power: 40,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, working length: 3,050 mm, working width: 1,620 mm, working height: 380 mm, repeat accuracy: 0.1 mm, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, 4kw, CO2, Fanuc, new turbine in 2025 & vacuum pump. Everyday at work. Automation LKI MP 300 Hsdpfxoxa Dxuj Anvenn

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, laser power: 4,400 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, with ByLaser 4400 with turning axis ByVision cnc control Hjdpfjy N Rgmjx Anvonn with changing table Technische Daten / technical details: Blech-Nennmass X, Y / sheet nominal size X, Y 3000, 1500 mm Schneidbereich X, Y / cutting range X, Y 3048, 1524 mm Hub Schneidkopf Z / stroke cutting head Z 170 mm Drehachse: / turning axis: Profilaufnahme Spannfutter / profile taper clamping chuck 15-315 mm Profilzuführung durch das Spannfutter / profile feed through the clamping chuck 15-155 mm max. Profilbearbeitungslänge / max. profile working length 2700 mm Laserleistung / laser capacity 4,4 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Gewicht ca. / weight ca. 13500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Hodpfx Anjzc Hn Eovsnn Type: COMBIREX DX 3500 Machine No.: 21214714 Year of Manufacture: 2012 If you have any questions or require further information, please contact us by email or phone.

Condition: used, functionality: fully functional, Year of construction: 2022, laser power: 8,000 W, Equipment: CE marking, cooling unit, dust extraction, safety light barrier, TRUMPF TruLaser 5040 L76 8kW TruDisk 8001 8kW SmartBeam Control Highspeed Eco cutting package Compressed-air cutting Cutting package for thick sheets Machine ambient temperature up to 45 °C Technical data: Laser-specific data - TruDisk 8001 Maximum laser power 8000 W Maximum sheet thickness, mild steel 25 mm Maximum sheet thickness, mild steel 32 mm Maximum sheet thickness, stainless steel 40 mm Maximum sheet thickness, aluminum 25 mm Maximum sheet thickness, copper 10 mm Maximum sheet thickness, brass 10 mm Axis data - Maximum axis speed Simultaneous 280 m/min Working range, workpiece size - Nominal working range: X axis 4000 mm Y axis 2000 mm Hjdpfx Anjzcdfbovjnn Z axis 116 mm

Condition: good (used), Year of construction: 2021, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2021 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   Hnsdpfx Aezcng Asnvsn X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace   Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hnedpfxezcngcj Anvon

Condition: excellent (used), Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 1,750 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 60 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting width (max.): 1,750 mm, cutting height (max.): 60 mm, compressed air connection: 6 bar, Automatic conveyor cutting machine OROX ICUT C600, year 2022, in excellent working condition. Low hours of use. Complete package: - OROX ICUT C600, cutting area 180x175 cm, with all standard accessories - FLESE smart blade - COVER second film pressure device - POPS intelligent labelling/marking system - Spreading tables 12 m total (10 m with air flotation + 2 standard) Technical specifications: - Max. cutting height: 6 cm (compressed lay) - Max. cutting speed: 60 m/min - Axis speed: 120 m/min, acceleration 0.8 G - Power: 19 kW max / 8-9 kW average consumption - Supply: 3-phase 400V 50Hz - Compressed air: 150 L/min at 6 Bar - Weight: approx. 2,700 kg - OS: Windows 10, Intel i5 Features: EVAS electronic vacuum system, RIVER SYSTEM continuous cutting, laser zone positioning, automatic diagnostics, wireless/LAN data transfer, CAD interface ISO/DXF, automatic table cleaning, blade sharpening system. Suitable for: fabric, synthetic leather, foam, upholstery, laminated materials, technical textiles. Location: Kaunas, Lithuania (EU). Available for inspection by appointment. Hnodpozb U Hmofx Anvjn

Condition: new, functionality: fully functional, Year of construction: 2025, BODOR Laser Cutting Machine Model: P3015-12000W with 12 kW BODOR Laser Source Equipped with a shuttle table, programmable via CNC control system Configuration: - 12 kW BODOR Laser Source - Bodor Genius Laser Cutting Head - Bodor Thinker Control System - 21.5-inch monitor with touch function - Insert and dovetail plate welded segment bed - Bodor servo motor and driver - SMC oxygen regulating valve from Japan - Parker nitrogen regulating valve from America - Automatic nozzle changer (8 stations), nozzle cleaning, and calibration automatic - One-click processing - Bodor Lightning Perforation Technology - Automatic adjustment of cutting gas pressure (O2) - Protection when the door is open - Alarm function for cutting errors - Autofocus of the laser head - Expert database for laser cutting technology - Ergonomic remote control (Bodor Mango®) - Active anti-collision function - Intelligent maintenance reminder - WIFI internet connection - Bodor Cloud service - Water chiller - Stabilizing transformer - CE conformity Technical Data: Length with panel: 9,950 mm Width: 3,050 mm Height: 2,300 mm Weight: 8,300 kg Working area: 3,048 x 1,524 mm Max. workpiece weight: 1,450 kg Shortest pallet change time: 10 sec. Max. simultaneous speed: 200 m/min. Positioning accuracy: 0.03 mm Repositioning accuracy: 0.02 mm Screen size: 21.5 inches Number of shuttle tables: 2 Max. sheet thickness carbon steel: 35 mm Max. sheet thickness stainless steel: 30 mm Max. sheet thickness aluminum: 25 mm Max. sheet thickness brass: 16 mm Max. laser power: 12 kW Laser source type: Bodor Laser head: Bodor Genius Software: Bodor Thinker Including the following special accessories: - Extraction system (The connection/piping of the extraction system Hedpfjzd Eqgox Anvenn to the machine must be carried out by the customer) - Wear part set - Installation package - Including fully automatic loading and unloading module, Model: iTrans 3 Technical Data: Max. material size: 3,000 x 1,500 mm Min. material size: 1,000 x 1,000 mm Max. material thickness: 25 mm Min. material thickness: 1 mm Max. loading weight: 900 kg Max. loading weight for finished products in the trolley: 3,000 kg Dimensions loading module (L x W x H): 10,000 x 8,500 x 2,600 mm Weight loading module: 4,800 kg Errors and prior sale are reserved!

Condition: good (used), Polar Mohr 78 ES Paper Guillotine Machine in very good condition, serviced and ready to use. Made in Germany. Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Weight: 1400kg Hodpey Tu Tlsfx Anvonn Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), HPM 92 Paper Cutting Guillotine Hnedpfxjy Tu Sne Anvsn Machine in very good condition, ready to work. Year of manufacture: 2009. High quality. Technical specifications: Cutting width: 920 mm Stack height: 120 mm Weight: 2500 kg 380V power supply Equipment: – Programming unit with color touchscreen monitor (Mitsubishi Manufactured) – Air table – Enlarged side tables – Photocells – Chrome table surfaces – Spare knife Machine modeled after the German Polar, very solidly built, with Western electronics (Schneider, Mitsubishi, Eaton). Very stable rear frame construction, CNC rail guidance, ball screw drive.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication Hedpfxsy Tu Rws Anvsnn – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, DGUV certified until: 07/2028, type of input current: AC, total length: 440 mm, total width: 1,700 mm, total height: 470 mm, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 470 mm, space requirement length: 440 mm, space requirement width: 1,700 mm, Cutting LEO with extended infeed conveyor Pretzel Bun Baguette - Schneider Tabletop unit made of stainless steel Knife height adjustable for average Belt speed adjustable DGUV V3 tested Connection 230 / 240V, 50 Hz, ready to plug in Passage width / height 140/90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW machine Hnjdpfx Anjf Epwvevsn With guarantee optional: - Mobile table for LEO - Cutting - freight costs - Shipping wooden crate VISIT our sales center with bakery equipment and many bakery machines

Condition: excellent (used), Year of construction: 1960, machine/vehicle number: 3/60 388, Format (cm): 80 Equipment / Additional information: 1xreserve knife Hnjdpomb U Rcofx Anven Condition: Very good condition / New controller

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 6541110, Format (cm): 137 Equipment / Additional information: Hsdpfexixdwsx Anvenn Side tables, air table, safety barriers, 1xreserve knife -PALLET LIFTER -VIBRO TABLE RAB5 WITH INTEGRATED SCALE (M. No.: 6581211 // Age: 1995) -UNLOADER TR 1ER 145-4 (M. No.: 6591126 // Age: 1995)

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 6386927, Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Hydraulic precision drives for knives and press beams Continuously adjustable pressing pressure with display 99 memory programs with up to 99 steps Hedpfeup Awbjx Anvjnn

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 5561703, Format (cm): 76 Equipment / Additional information: Side tables, air table, 1x reserve knife Hjdpfeydcuqjx Anvjnn

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6173431, Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, Hnjdpfx Aeulxg Djnvsn so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 3392-014, Format (cm): 76 Equipment / Additional information: Side tables, air table, 1xreserve knife Hnsdpfx Ajwmlc Djnvsn

Condition: excellent (used), Year of construction: 2010, Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Hnjdsxcaibepfx Anven