Used Cutting/Sorting Line for sale (22,235)

Condition: new, Jartek dry and green board sorting line Itsdpfx Aqsx Ddhkjpeg

Condition: ready for operation (used), Maximum saw blade diameter: 550 mm Itjdpexx Scfefx Aqpog Motor power: 5.5 kW Maximum cutting length: 5 m Discharge table with four ejectors Control via touchscreen panel with inPush software Loading table with chains Length: 7800 mm Depth: 1600 mm Weight: 1500 kg Saw blade speed: 2800 rpm Year of manufacture: 2014 CE marking

Condition: excellent (used), Meren Jonson Multi-Saw with Automation Powered roller infeed with centering Roller outfeed with side pusher Rubber crawler feed system Press rollers under the shaft for cutting short pieces Smooth feed speed adjustment Maximum cutting height: 100 mm Supported saw shaft Main motor: 75 HP (56 kW) Planer Double-sided planing (top and bottom) Working width: 610 mm Working height: 152 mm Bottom motor power: 15 kW Material removal: 12.7 mm Electrically adjustable working height Maximum feed speed: 30 m/min Isdpfx Aqexm Sczjpetg Automatic lubrication system Total power: 50 kW

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders Itsdjxf Up Uspfx Aqpjg - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Itodpfsw Az Rpjx Aqpjg

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces Itodpfx Aqox Eb Abjpog - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Year of construction: 2025, condition: new, 1) Climb - conveyor, with hopper: 1 pcs. The length of the conveyor: 8000mm, working width: 600mm, Hopper: length 3000mm, width 2000mm, height 1500mm from the ground, EP 400/3 rubber belt with chevron t 16mm sleepers, Transfer speed controlled by inverter max. 0,2 m / s, conveyor belt with STOP safety switch, 2) belt conveyor for sorting 1 piece. Length of the conveyor: 10000 mm, working width of the conveyor: 950 mm, height: 1400 mm to the upper part of the belt. Height: 1500 mm to the upper part of the sides. The sides of the conveyor are made of galvanized steel, the rubber belt EP 400/3 is smooth, the sides of the conveyor 100 mm. A hopper with a height of 600 mm on both sides and a width of 1000 mm. The speed of the conveyor is controlled by an inverter with a maximum speed of 0.3 m / s. 3) Working platform: 6 pcs, platform width: 1200 mm, platform length: 1200 mm, platform height: 500 mm, platform with safety barriers. 4) Loading handles for recyclable materials: 8 pcs, height: 1300 mm, width: 1300 mm, length 1300 mm, With caster wheels on bearings and handles for fastening big bags. 5) Balast - conveyor on the round axle and two running wheels: 1 piece, The length of the conveyor: 8000mm, working width: 600mm, Itedpfx Aed N Hhujqpeg Hopper: length 1200mm, width 1000mm, height 1000mm above the ground, Ascent height: 3700mm, EP 400/3 rubber belt with 60mm T-steps, 500mm, fixed speed 0.4m / s, conveyor belt with STOP safety switch. 6) Sorting line, out

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Rema system with measuring frame type 9001 Ijdpfxer Hbcfe Aqpjtg Hydraulic log kickers

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Working direction: from right to left. Automatic loading unit. Minimum workpiece length 600 mm (shorter workpieces can be placed directly on the machine infeed table). Model “Speed” (faster material loading, see PDF). Usable length 6000 mm. Cutting accuracy +/- 1.5 mm. Cutting range, see diagram (PDF). Motor 5.5 kW, saw blade ø 500, 3600 rpm. Electronic control CONTROL 6.0 / Windows. Full optimization with error correction. Waste disposal package. Outfeed table with integrated cross pushers 3500 x 1500 mm. PALETTI data connection for use with cutting lists issued in the office. Automatic labeling (PALETTI print manager). LAYOUT. See all technical features attached PDF. Itodpfx Aqjxtmwmspjg

Condition: used, One simple combi sorting line with 10 band pockets and a capacity of up to 40 pieces per minute. Itsdpfx Aqoxyaivspog

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Itedoxa Excopfx Aqpsg

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch Ijdpsxa Ettofx Aqpstg 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 10,000 kg, number of straightening rollers: 6, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 255 mm, sheet thickness copper (max.): 3 mm, inner diameter: 510 mm, outer diameter: 1,500 mm, mandrel diameter: 510 mm, mandrel length: 1,500 mm, coil width: 1,500 mm, coil outer diameter: 1,500 mm, number of blades: 8, warranty duration: 12 months, straightening roller diameter: 140 mm, total width: 1,500 mm, Slitting line model 1,500 x 3 mm, comprising: - Decoiler Aspo mod. 1500/5Ton (customizable) - Loading table - Feeder and straightener with 6 rollers, diameter 140 mm - Rotary cutter with 4 pairs of circular blades Itodpfxex Hr S Se Aqpog - Automatic punching unit with 20 customized punching stations - Mechanical shear - Aspo recoiler

Condition: used, DIMENSIONS: Iodpfx Aow E Eudoqpjtg HEIGHT 100 mm WIDTH 270 mm ELECTRONIC PUSHER LENGTH 6100 mm SAW BLADE MOTOR 4 kW

Year of construction: 2006, operating hours: 8,830 h, condition: good (used), functionality: fully functional, machine/vehicle number: R1153413, Alpine mill including complete plant for sale Cutting mill: Rotor diameter: 600 mm Iodpfx Aqsxd Aiajpjtg Rotor width: 1000 mm 6-knife rotor Year of manufacture: 2006 Included: Material feed belt (designed for automotive bumpers), mill, conveyor line for packaging into octabins or big bags, dedusting system. Condition: Very well maintained, regularly and promptly serviced Inspection: In operation until recently, currently still powered and available for on-site inspection at any time Ready for operation: Immediately available and fully functional The machine is in very good condition and is ready for immediate use.

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport Itsdpfx Aqsgvu Aljpog - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: used, RSA RASACUT SC 3000 – Complete automatic tube cutting, deburring, measuring, cleaning & drying line This is a complete RSA high-performance tube processing line for continuous production, from stock tube to finished fixed-length tube sections up to 3,000 mm. The system integrates the full workflow: Bundle Loader → Cutting → Deburring → Measuring → Cleaning (washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed length cutting up to 3,000 mm · Complete RSA line: Bundle Loader + Cutting + Deburring + Measuring + Cleaning (washing) + Drying · Automatic tube singulation from bundle magazine · Servo-controlled saw forward feed with programmable cutting parameters · Automatic interlinking between stations (no manual adjustment required) · Deburring with 360° rotation, inside + outside edges · 100% length measuring with automatic rejection · Integrated washing and drying system for finished tube preparation · Siemens control: S7-300 + OP17 · Supplied with a large set of wrap-around jaws TECHNICAL DESCRIPTION 1. Bundle loader magazine The tube bundle is loaded by crane or forklift into the magazine. The system automatically singulates the tubes and feeds them into the roller infeed, allowing continuous production from stock tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic sawing unit with servo-controlled saw feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length, with programmable cutting parameters for repeatable cutting results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous inside and outside deburring of both end faces. Automatic adjustment is performed from the central control. 4. Measuring | RSA RASACHECK 3000 A Integrated length measuring station providing 100% control of finished parts. Workpieces outside the programmed tolerance limits are automatically rejected, ensuring only compliant parts proceed to the next stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed for thorough removal of swarf and dirt particles. Workpieces pass through a sealed washing zone where the cleaning medium is applied under pressure and contaminants are collected in a swarf filter. 6. Drying | TURBODRY Hot-air drying station with adjustable air volume and temperature. Removes droplets and condensation after washing, delivering dry tube sections for downstream handling. 7. Tooling | Large set of wrap-arount jaws Supplied with a large set of wrap-around jaws covering multiple tube diameters, enabling quick changeovers without additional tooling. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Stock length (incoming tubes): 8,000 mm · Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) · Tube weight: Max.10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Can be inspected in production (seen running). Iedpfxoyllvyj Aqpetg Contact us for a quote, full details and inspection arrangements. Round tube diameter: 10 to 90 (101) mm Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Wall thickness: 0.6 to 6 mm Tube weight: Max.10 kg/m Length/diameter ratio: 2:1 Stock length (inc...

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 7,700 mm, total length: 19,300 mm, Year - 2016 Model - 630 CBM and 353BCS-R 4 station double loader Cutting , grinding, marking and breakout. Itjdpfjyc Uq Iox Aqpjg Tilt function Shape scanner Perimeter fencing for loader Delivery and Installation available.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, coil weight: 10,000 kg, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, outer diameter: 1,600 mm, coil width: 1,524 mm, number of blades: 3, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 100 mm, CTL Demaq Format. New, only exposed in fair. Itjdotywpbepfx Aqpsg Coil up to 10 Tons D1600, 20" Nominal. Coil Cart hydraulic. 4 rolls of feeder and 7 straight rolls. Hardened and chromed. Servo Nidec in straightener and decoiler. 3 longitudinal knifes, axis (HC) 134 mm, knifes 220 mm. Transversal shear. Full made in Spain in our facilities. Optional other devices and configurations. The most popular Demaq SPL machine. 2 unites available.

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Itsdjihf Tpspfx Aqpog Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: Iodpfx Aethg Disqpotg MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Itedeixqg Njpfx Aqpjg Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Itsdpjuzn Nnjfx Aqpsg Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system Itodpjl H E Tasfx Aqpsg infeed belt 6 m 6 ejection stations total length 12 m The infeed belt is not running at the moment, probably because of the frequency converter.

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Ijdpfx Ajgnygljqpotg