Used Disc Valve Dn65 for sale (12,941)

Condition: used, Year of construction: 2025, operating hours: 6 h, power: 82 kW (111.49 HP), Operating hours: 6, First registration: 06/30/2026. New tractor with dealer’s temporary registration before handover. Standard equipment / technical data. Engine: Rated power (ISO) 82 / 110 kW / hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4 l, 4 valves, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - one-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-shifting reversing gear, 4-stage load shifting, Continuously cooled wet clutches with independent lubrication system, Double PTO shaft: 540 / 540E / 1000, Switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / lifting system: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single / double acting, mechanical remote control + 1x single / double acting, neutral, SST, Quick coupler Cat. 3 with balls and catch cups Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lifting struts on both sides and 2 side stabilizers, EHR with external control on both fenders. Electrical equipment: Thermostart, 120 A alternator, Battery disconnect switch, electrical, Power supply (12 Volt) for external devices with connector. Axles / additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Quick-adjusting automatic trailer hitch, Fender outer width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Cab: Vibration-damped standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver’s seat with armrests, rotating adapter, seat belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplers, 3 control valves: 1x MR, double acting, EA, SST + 1x double acting, neutral, SST + 1x double acting, neutral, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Passenger / instructor seat with belt, Air-suspended driver’s seat, automatic adjustment with seat belt, rotating adapter and armrests, Rear window wiper / washer system, Battery. Ljdsyvmq Iepfx Apdsag

Condition: used, Year of construction: 2002, Cylindroconical stainless steel tank with glycol cooling for frame and cone, ventilation nozzle at the outlet and various fittings. Wall thicknesses: - Cone 3 mm - Frame 2 mm - Clamp bottom 3 mm Cone angle: 120° Roughness of cone interior < 0.35 µm Additional title: Vertical, cylindrical-conical, coolable stainless steel tank Volume: 4681 liter Working pressure tank: 0,99 bar Working presure double jacket: 0,9 bar Width: 2.3 m Height: 2.5 m Material: V2A stainless steel 1.4301 (AISI 304) Base construction: cylindroconical, opper bottom dished shell, on 3 cabinet legs one is 50mm shorter for a load cell Features: 3 cooling zones with volumes of 7 and 14 and 34 liters, coolant = glycol solution, connection size inlet (one each) DN 20, connection size outlet (one each) DN 25, sight glas DN100 mit halogen lamp,CIP head, air duct with sterile filter, standpipe, outlet pipe DN 65 with disc valve, manhole with lid, sampling tap, temperature sensor, load cell, Safety fitting consisting of over pressure pipe with valve, manometer and flap valve DN32 Lajdpfx Apeztza Aodeg

Condition: used, maximum load weight: 29,947 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 04/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, total length: 13,830 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Strong Light Curtain Side Semi-Trailer Fifth Wheel Height: 1145 mm Side Loading Height with Lifting Roof and Internal Height 2700 / 2610 mm Side Loading Height without Lifting Roof and Internal Height 2700 / 2560 mm Neck Height: 120 mm Overall Length: 13,830 mm Platform Internal Length: 13,620 mm Overall Width: 2,550 mm Platform Internal Width: 2,480 mm Internal Width Between Stanchions: 2,480 mm Internal Width Between Longitudinal Beams (without lifting roof): 2,480 mm Internal Width Between Longitudinal Beams (with lifting roof): 2,430 mm Axle Spacing: 1,310 mm Kingpin to 1st Axle Distance: 6,390 mm Technically Permissible Gross Weight: 42,000 kg Technically Permissible Axle Load: 9,000 kg Technically Permissible Fifth Wheel Load: 15,000 kg Accuracy: +/- 4% n.d. External Height: 4,000 mm Unladen Weight: 6,053 kg Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel area. Welded construction, weight-optimized, made from high-strength S700 steel Air suspension Side underrun protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Floor made of 30 mm phenolic resin plywood, load capacity 7.5t plus steel chequer plate at rear approx. 270 mm deep Steel lamp carrier Lashing rings - 19 pairs, 2T each Rubber bumpers at rear Rigid rear underrun protection Steel rear underrun protection Axles and Suspension Number of axles: 3 Rigid axles No axle lift on 3rd axle BPW disc brake axles 3x9000 kg, 22.5 ECO PLUS 3 clamp BPW ET=120 1st Lift axle Fifth wheel height: 1145 mm Landing Legs SAF Hercules two-speed landing gear, full load Fenders PVC fenders – 1 shell, 2 front, 2 rear Rims 6x aluminum rims 22.5x11.75 ET-120 ALCOA DURA BRIGHT Tyres 6x tyres 385-65-22.5, manufacturer optional Other Chassis Equipment Warning panel mounted on rear underrun protection Bozamet 32 pallet box Two chocks with mountings Body Internal height: 2,700 mm Top boards – 4 rows 1st row: aluminum side boards, H=100 mm, 8 pcs. Lifting roof (0, +50) Side curtains with 18 curtain tensioners, side curtain 900 g/m² Aluminum front wall Front wall collision protection (plywood), H=1,500 mm 2nd row: aluminum side boards, H=100 mm, 8 pcs. 3rd row: aluminum side boards, H=100 mm, 8 pcs. 4th row: aluminum side boards, H=100 mm, 8 pcs. Quick-release curtain tensioner at front Curtain tensioning device at rear Sliding roof, both sides openable, EDSCHA HYBRID Rear wall with aluminum double wing doors Brake System/Pneumatics Aluminum air reservoir Brake system (Knorr, Wabco, Haldex), manufacturer optional RTR automatic self-leveling (Standard brake system Wabco or Knorr with H-S valve) Chassis Paintwork Chassis painted in RAL 3002 (Carmine red) KTL coating Curtain Colour Side curtain colour Roland 3015 ~ RAL 3002 (red) Other Equipment Paintwork Two-sided paintwork (powder coating) for front wall, doors, and corner posts Additional paintwork in RAL3002 (Carmine red) Electrics 2x 7-pin + 1x 15-pin connections with EBS connection, without connecting cables to the tractor unit Hella LED EASYCONN lighting Markings Partial contour marking with Wielton logo Partial contour marking, side white Partial contour marking, rear red Wielton warning stickers Labelling in German Certificates/Homologation XL Certificate Beverage Certificate All details are subject to change. Errors excepted. Subject to prior sale. Laodpfew N Ua Nox Apdog

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return Lsdpfx Apezpcvdsdsag 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Chassis: Ladder frame made of lightweight steel, with continuous crossmembers. Coupling plate, 8 mm thick, with a 2-point kingpin according to DIN 74080 / ISO 337. Suspension: Axle lift mechanism on axle 1, 18330.700, manufacturer optional (Kögel). Three-axle unit, with disc brakes, approximately 430 mm in diameter, approximately 120 mm offset. Air suspension with approximately 180 mm of travel. Vehicle tires: 6x 385/65 R 22.5, 160J (European brand, manufacturer optional - Kögel). Chassis components: Kingpin supports (manufacturer optional - Kögel), mechanical with leveling foot, approximately 24 tons lifting capacity. One-sided operation on the right-hand side when driving. Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011, consisting of 1 pair of quarter-fender mudguards in front of the axles, and 1 pair of quarter-fender mudguards with mud flaps behind the axles. 2 wheel chocks with holder. Pallet box for 24 Euro pallets, completely enclosed, protected against spray water, and also serves as a side protection device. Ground clearance (front) 220 mm. Plastic toolbox, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installed on the left-hand side at the rear. Retractable access ladder at the rear on the right-hand side. High, rigid rear underrun protection made of steel according to ECE-R58. Height of the underrun protection profile min. 120 mm, designed for increased test loads. 1 pair of retractable warning panels for over-width loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection. Arrangement in the front and rear vehicle area. Braking/air suspension system: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting cables), parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. EBS system (manufacturer optional - Kögel). Air suspension system including 1 lifting and lowering valve, mounted on the left-hand side behind the axle unit when driving. Driving height is adjusted automatically. 2 fail-safe coupling heads at the front, ISO 1728. Air tank for brake system and air supply made of steel (EN 286-2). Floor: Plate floor, approximately 30 mm thick. Floor sealed at the rear. Superstructure: WITHOUT quick-release device for front side tarpaulin, with tensioning rods. Quick-release device at the rear for side tarpaulin with tensioning rods and ratchet. Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approximately 27,000 kg. Front wall: Front wall in superstructure height with aluminum corner posts, riveted with aluminum hollow profiles, screwed/riveted to the frame, 1 pair of lashing eyes according to EN 12640. Inside of front wall reinforced with 12 mm plywood with screen-printed surface, approximately 1,250 mm high. Rear wall: Double-wing rear portal door made of aluminum, approximately 2,630 mm i.o.L. 4 integrated twist lock closures (2 pieces on the left, 2 pieces on the right), manufacturer optional - Kögel. Bolted corner posts at the rear made of aluminum at portal height. Corner posts on both sides, approximately 500 Ljdozqii Hopfx Apdeag

Condition: used, machine/vehicle number: WFDFLT21601003373, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2013, total length: 5,200 mm, total width: 2,550 mm, tire size: 285/70 R19,5", color: grey, 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! Conversion to CLG dolly in progress – some units already completed. Please note: The photos shown are archive images and may differ from the actual vehicle. # Chassis Heavy-duty fine-grain steel welded construction Fifth wheel coupling (manufacturer of our choice) for 2" kingpin with ball-bearing turntable, steering angle max. 20° Telescopic landing leg 2 wheel chocks with holders Laedpfxozm Trqs Apdjg Steel rear underrun protection Half-shell mudguards CLG drawbar with certified 50 mm towing eyes for connection to both the dolly and the towing truck. # Axles + Suspension BPW disc brake axles Air suspension with raise/lower valve # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at the front with connecting lines to the towing vehicle 2 non-interchangeable air couplings for the semi-trailer Electronic Braking System (EBS) with front EBS connector and connecting cable EBS connection cable for the semi-trailer Axle load detection for the truck via EBS Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white LED front position lights 2 white/red LED rear outline marker lights 1 × 15-pin connector with cable to the towing vehicle 1 × 15-pin connector with cable to the semi-trailer # Registration Prepared for registration in Germany DEKRA approval included Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Dimensions Fifth wheel height: approx. 1,150 mm Drawbar coupling height: approx. 380 mm Archive photos – actual vehicle may vary.

Condition: used, maximum load weight: 36,250 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame: Chassis frame made of high-quality steel, but without an outer frame. Coupling plate with a 2-inch drawbar eye according to DIN 74080 / ISO 337. With crossmember and container locking mechanisms for accommodating: a) 1 x 45' High-Cube container b) 1 x 40' High-Cube container c) 1 x 30' ISO container, flush at the rear d) 2 x 20' ISO containers e) 1 x 20' ISO container, flush at the rear g) 1 x 45' ISO container h) 1 x 40' ISO container With 1 pair of height-adjustable container locking mechanisms and 3 pairs of foldable center supports, plus crossmember and container locking mechanisms for accommodating: f) 1 x 20' ISO container in the center Frame extension at the rear, mechanically extendable, load capacity approx. 5,800 kg, with spiral cable. Low-maintenance guidance on special plastic sliders and 2 extension rollers. KÖGEL frame extension at the front, manually extendable and mechanically lockable, incl. container guide on the left and right. Designed according to Directive 719/2015. Frame extension in the center, manually extendable and mechanically lockable with the tractor unit. Chassis: Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h. Operation on the chassis via switch. Additionally possible from the cab (switch in the cab necessary - PIN 12). When transporting 30' and 45' containers, the 1st axle CANNOT be lifted! BPW three-axle unit, with disc brakes Ø approx. 430 mm, mounting depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires: Wheels with internal sensors according to UN ECE R141. Tires 6-fold 385/55 R 22.5 UNIROYAL TH 50. 6 steel rims 22.5 x 11.75, mounting depth approx. 120 mm (ET 120). Chassis Components: Lsdpozkx Hzjfx Apdjag JOST landing gears, mechanically operated with leveling foot, 24 t lifting capacity. One-sided operation in the direction of travel, on the right. Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with mud flaps. 2 chock blocks with holder. Side protection, according to ECE-R73, closed. Rear underrun protection made of square steel tube according to ECE-R58, screwable. Height of the underrun protection profile min. 120 mm, designed for increased test forces. Brake / Air Suspension System: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. Air suspension system incl. 1 raising and lowering valve, mounted on the left in the direction of travel in front of the axle unit. 2 non-interchangeable coupling heads at the front ISO 1728. Air reservoir for brake system and air supply made of steel (EN 286-2). Rear Impact Protection: Continuous steel rear impact protection, solid, on the end member at the rear. Information Systems: Tire pressure monitoring system according to UN ECE R141. Accessories: Document tube, diameter approx. 105 mm. Mounting on the left in the direction of travel on the side protection. 1 fire extinguisher 6 kg with pressure gauge (European approval). Mounting incl. holder and protective cover on the left in the direction of travel o

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,950 kg, maximum load weight: 15,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,080 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy arms based on 20" dimensions for 7.15 m and 7.45 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center measuring approx. 200 mm in length and 800 mm in width! Swivel mount with heavy-duty ball bearing swivel ring Wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Quarter-shell fenders in front and half-shell fenders in the rear Includes mud flaps for fenders Large Fliegl mud flap mounted transversely on the underrun protection at the rear *Trailer coupling system (turntable) Drawbar with certified 40 mm drawbar eye *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lift & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly “TPMS” tire pressure monitoring system according to ECE R 141, display in the towing vehicle via EBS *Wheels and tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver Lsdpfozfp S Dox Apdsag *Electrical system 24 volts, multi-chamber lights, yellow LED side lighting Yellow LED side lighting linked to the turn signals “Flashing side lights” 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, additional LED work light(s) at the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of registration/license plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Chassis galvanized or painted in colour of choice

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Laedpey Rxmwsfx Apdog Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: new, Factory-new, electrically heated stainless steel mixing tank Article number: EBB150RWAD Volume: 152L Dimensions approx.: Ø 660mm x cylindrical height 625mm Overall height: 910mm Material: 1.4301 stainless steel V2A Surface: Matte finish inside and out Welds ground smooth Operating temperature max.: 110°C Operating pressure tank: ATM -Vertical design on rollers -Top: Central cross member for the agitator with two hinged lid halves -Bottom: Flat bottom with side outlet DN50 DIN11851 and disc valve -Agitator flange on the top -2x handle for pushing -1x nameplate Heating system: Indirect heating Double jacket around the tank with glycerine filling as the heat transfer medium. Heating is carried out by an electric heating element in the double jacket. Power: 9KW Operating voltage: 3PH 400V Incl. supply line 16A CEE plug Centric agitator: Slow-speed anchor agitator with wall scrapers Type: SRTGMK/0.37-9.5 Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.37KW Speed: 0-9.5 RPM Operating voltage: 1PH 230V Material in contact with product: 1.4301 stainless steel -Gearbox and motor in the latest aluminum technology, manufacturer Getriebebau NORD -Gearbox with food-grade approved oil filling "Klüber" -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of large anchor agitator in the tank, welds ground smooth, arranged close to the wall -2 Teflon wall scrapers in the cylindrical area, one at the bottom -Stainless steel flange with shaft seal, EPDM Speed control: Compact frequency inverter on the agitator motor with on/off switch and potentiometer Control: 5m cable and RCD socket switch, undervoltage release Eccentric agitator: Speed-adjustable dissolver agitator Type: SRTMKD/1.1-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 1.1KW Speed: 0-1690 RPM Operating voltage: 3PH 400V Lajdpfx Ash Hxxfjpdog Material in contact with product: 1.4301 stainless steel -Motor in the latest aluminum technology, manufacturer Getriebebau NORD -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of dissolver disc Ø 125mm screwed onto the end of the agitator shaft, seal O-ring, EPDM -Stainless steel flange with V-ring seal, EPDM -Stainless steel spacers for motor mounting Speed control: Frequency inverter mounted on the motor, manufacturer Getriebebau NORD. On/off switch, potentiometer, phase inverter Control: CEE plug switch on the tank with undervoltage release and phase inverter, emergency stop

Condition: used, machine/vehicle number: WFDFLT21601003376, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 01/2014, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer at our discretion for 2 kingpins, telescopic support leg, chock blocks with holder, steel underride guard, half-shell fenders. Drawbar with tested 50 mm drawbar eye, lower coupling drawbar mechanically adjustable in length. BPW disc brake axles, air suspension with raise and lower valve, electronic dolly steering system, sensor via contact in the drawbar eye (required in Germany to comply with the BO-Kreis regulation, or the semi-trailer must be steerable). 2-line pneumatic brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit, 2 non-interchangeable coupling heads to the semi-trailer. EBS, electronic braking system with EBS plug at the front, with connecting cable, EBS connecting cable to the semi-trailer, axle load recognition for the truck via EBS, without truck installation. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole plug at the front. Registration country: Germany, with Dekra approval, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70. Fifth wheel height approx.: 960 mm. Lajdei Riydopfx Apdsg

Condition: used, machine/vehicle number: WFDFLT21301003569, empty load weight: 2,400 kg, maximum load weight: 11,000 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 03/2014, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer to our choice for 2 kingpins with ball bearing swivel, stop max. 20°, telescopic support leg, 2 chock blocks with holder, steel underrun protection, half-shell mudguards. CLG drawbar with tested 50 mm towing eyes for the dolly and the tractor unit. BPW disc brake axles, air suspension with lift and lower valve. 2-line pneumatic brake system, spring-loaded parking brake, Duomatic coupling head at the front, with connection lines to the tractor unit, 2 fail-safe coupling heads for the semi-trailer. EBS, electronic brake system with EBS plug at the front, with connection cable, CAN router, EBS connection cable to the semi-trailer. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! Axle load recognition for trucks via EBS, not installed. 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, 2 white position lights at the front in LED. 2 white/red marker lights at the rear in LED, 1 x 15-pole plug at the front, with connection cable to the truck, 1 x 15-pole plug with connection cable to the semi-trailer, cable routing for camera system. Country of registration: Germany, with Dekra approval, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Fifth wheel height approx.: 1150 mm. Lsdpfx Aji Rizmopdeag

Condition: new, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 6,896 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,310 mm Rollway length approx. 6,880 mm Wheelbase 5,100 mm Complete empty weight 3,860 kg Gross weight approx. 18,000 kg Payload 14,140 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis with cross members, welded box-type idler beams made of QSTE steel 4 pneumatically operated container locks Side guards closed according to Directive 89/297/EEC. Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40mm, outer diameter 110mm, thickness 30mm Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 4300 mm, wheel mounting by centering according to DIN 74 361 Part 3. Braking system Compressed air brake system according to EU directive with Duomatik coupling head Ledpfx Apevynaasdsag Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system in accordance with Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice 1 x 15-pin connector 6 LED side marker reflectors with flashing lights 2 white LED front marker lights 2 LED rear lane departure lights, separately mounted 1 LED reversing light Wheels/Tires Regional transport tires: 4 tires 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles serve to protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box Paintwork Chassis color: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions Side protection device, closed Hanging net box, galvanized EBB sticker DEKRA certificate All information No guarantee. Errors excepted. Prior sale possible.

Condition: new, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 6,896 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,310 mm Rollway length approx. 6,880 mm Wheelbase 5,100 mm Complete empty weight 3,860 kg Gross weight approx. 18,000 kg Laedpsvynagefx Apdsg Payload 14,140 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis with cross members, welded box-type idler beams made of QSTE steel 4 pneumatically operated container locks Side guards closed according to Directive 89/297/EEC. Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40mm, outer diameter 110mm, thickness 30mm Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 4300 mm, wheel mounting by centering according to DIN 74 361 Part 3. Braking system Compressed air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system in accordance with Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice 1 x 15-pin connector 6 LED side marker reflectors with flashing lights 2 white LED front marker lights 2 LED rear lane departure lights, separately mounted 1 LED reversing light Wheels/Tires Regional transport tires: 4 tires 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles serve to protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box Paintwork Chassis color: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions Side protection device, closed Hanging net box, galvanized EBB sticker DEKRA certificate All information No guarantee. Errors excepted. Prior sale possible.

Condition: used, machine/vehicle number: WFDFLT21301006798, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 05/2017, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth-wheel coupling, manufacturer at our discretion for 2 kingpins, telescopic support leg, chocks with holder, steel underrun protection, half-shell fenders, removable upper parts Drawbar with tested 50 mm drawbar eye, lower coupling for drawbar BPW disc brake axles, air suspension with raise and lower valve, mechanical dolly steering system (required in Germany to comply with the BO-Kreis regulations) 2-line compressed air brake system, spring-loaded parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, Duomatik coupling head for the semi-trailer, including connecting coil, EBS, electronic brake system with EBS plug at the front, with connecting cable EBS connecting cable to the semi-trailer, with CAN router, axle load detection for the truck via EBS, without truck installation. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole plug at the front, with connecting cable to the truck, 1 x 15-pole socket, with connecting coil to the semi-trailer, cable for reversing camera system with socket with DEKRA approval, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70 Lasdsi Rivtepfx Apdog Saddle height approx.: 960 mm

Condition: used, machine/vehicle number: WFDFLT21301008306, empty load weight: 2,000 kg, maximum load weight: 11,400 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2018, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer's choice for 2 kingpins, with ball bearing swivel, stop max. 20°, lockable, support on the drawbar, shims with holder, steel underride guard, quarter-panel fenders in front of and behind the axle assembly, with tarpaulin cover for empty journeys. CLG lower coupling drawbar with tested 50 mm towing eyes for the dolly and the tractor unit. Lajdpfx Apsi Riyaodjg BPW disc brake axles with 370 mm disc diameter, air suspension with raise and lower valve. 2-line compressed air braking system, spring brake parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, 2 keyed coupling heads for the semi-trailer, incl. connecting spiral cable. EBS manufacturer Wabco, electronic braking system, with CAN router, with EBS plug at the front, with connection cable. EBS connection cable to the semi-trailer. Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Axle load recognition for trucks via EBS, not installed for trucks. 24 Volt, 4 x 3-chamber lights + 1 round rear fog light, yellow LED side lighting, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin plug at the front, with connection cable to the tractor unit, 1 x 15-pin socket, with connecting spiral cable to the semi-trailer, cable for reversing camera system with socket, additional LED work lights at the rear, switched via reversing light. Country of registration: Germany, with Dekra inspection, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Fifth wheel height approx.: 950 mm.

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2027, Year of construction: 2026, Equipment: ABS, BDF 2-axle interchangeable platform trailer 1120-1320 Dimensions and Weights Distance between twist locks – width: 2259 mm Distance between twist locks – length: 5853 mm Wheelbase: 1420 mm Lowering height: 1120-1320 mm Special lowering: 450 mm Ride height: approx. 1110 mm Tires: 385/55R22,5 nd Height of the drawbar eye: 400 mm Total weight: 18000 kg Manufactured according to EN 284 for C745/C782 nd Unladen weight: 3270 kg Technical Data Chassis Rubber-steel impact buffer at the rear Guide rollers - 2 pairs Bolted drawbar without longitudinal adjustment Steel side impact protection, Wielton design Lowering height: 1120 - 1320 mm Frame made of high-strength S700 steel, hot-dip galvanized. Container support with individual locking mechanisms (twist locks) for securing the interchangeable container. Lsdpfx Aszx Iqlspdoag Wheelbase: 1420 mm Drawbar eye: Ø50 mm, height-adjustable Steel underrun protection, galvanized Adjustable front bumper, suitable for bodies C745 / C782 Steel lamp bracket Axles and Suspension Number of axles: 2 BPW axles: 2x 9000 kg 22.5 with disc brakes. Large air suspension travel (450 mm). Outriggers 2 SAF steel crank outriggers front 2 SAF steel crank outriggers rear Fenders Plastic single-wheel fenders Rims 4x Steel rim 22.5-11.75 ET-120 Tires 4x Tires Hankook 385-55-22.5 Other Chassis Equipment Key for locking Marking plates according to ECE Wedges with handles, installed Two toolboxes (145 l Aberg), on both sides in front of the axles Braking System / Pneumatics Braking system Wabco with basic modulator with RSS/RSP Steel air reservoir Standard connection HS valve, mounted in front of the axles on the left side (driver's side) Painting – Chassis Frame hot-dip galvanized Electrical System Lighting: LED Aspöck - EUROPOINT III with flashing side marker lights Connection cables - swivel arm on the right side (passenger side) Electrical connectors: 15-pin and EBS. The system meets the ADR requirements LED work lights rear, controlled via a switch on the HS console: 5 LED lights rear, 2 each, on both sides, behind the axles; LED light front, 2 each, on both sides, in front of the axles; Centrally mounted LED light, 1 piece, in front of the rear container support Additional Systems The system has been developed for semi-trailers and trailers and is used to monitor the tire pressure and tire temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Suspension relief system (Bounce Control) Markings Partial contour marking with Wielton logo Partial contour marking, white, on the sides Partial contour marking, red, at the rear Warranty The manufacturer grants a 24-month warranty for the purchased vehicle, depending on the market in which the product is offered, in accordance with the General Terms and Conditions of Sale and Delivery, provided that the maintenance intervals specified in the warranty booklet are observed. Warranty period for ON-ROAD/OFF-ROAD products: 24 months for the entire product from the date of first registration 36 months for the vehicle frame from the date of first registration 36 months for the paintwork of the tipping semi-trailer loading platform 120 months for rust penetration of the frame sheet (i.e. from the inside out) Warranty exclusions: Warranty exclusions are regulated in sections P.3.1, P.3.2 and P.5.1 of the warranty booklet. In the event of a breakdown, we will provide you with

Condition: used, power: 120 kW (163.15 HP), first registration: 08/2012, fuel type: diesel, color: orange, empty load weight: 5,990 kg, driver cabin: other, gearing type: other, Year of construction: 2012, operating hours: 4,850 h, number of seats: 2, * Compact sweeper CLEANGO, standard configuration for Germany, 50 km/h * Speed 50 km/h * Disc brakes on the front axle with dual brake calipers * Proportional parking brake Lasdpezcfzwjfx Apdeg * Load-dependent valve on the rear axle (required for all 50 km/h machines) * Driver's seat with air suspension * Seat belts * Radio with USB and SD card connection * Heated exterior mirrors * Additional work mirror * Colored rear view monitoring system with TFT monitor * Air conditioning * Tachograph * Cup holder * Independent control of the rotary brush (raise/lower, ground pressure, inclination) * Third front brush Cleango 500 * Weed brush for the 3rd brush * Additional work light (for the 3rd brush) * Suction nozzle with rubber insert * Suction pipe with rubber insert * Preparation for subsequent installation of the hand suction hose * Water return system Cleango 500 * Container door with high and low-level water drain valves (top and bottom) * Water filling hose, Germany * Standard paint RAL 2011 municipal orange * Noise reduction package (only for exhaust fan) * Automatic central lubrication system instead of manual central lubrication * Protection for the rotating beacon * Oil service and maintenance performed at 4,850 operating hours Other: * Trade-in and purchase of vehicles and machines possible. * Selling price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer is non-binding. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/2020, Equipment: ABS, FFB semi-trailer with silo, model EUT 60.3-4/4, for the transport of feed, approx. 60,000 liters volume, 4-chamber aluminum design. Rated for a trailer total weight of 34,000 kg: 10 tons saddle pressure, 24 tons axle load technically permissible, 13 tons saddle pressure, 27 tons axle load (3 x 9 tons). Unladen saddle height 1250 mm. Container design: Container with 4 chambers, approx. 8,000 / 19,000 / 17,000 / 16,000 liters volume. Pressure equalization via elongated holes in the partition walls. 4 material discharge cones with special FFB material discharge bowls, DN 800 / DN 1000. Fluidization via special fluidization valve, manufacturer OLI. Operating parameters: The pressure vessel complies with the EC Pressure Equipment Directive. Operating pressure 2 bar, test overpressure 3 bar. Wall thickness approx. 5 mm. Operating temperature -40 to 80°C. 5 manholes DN 450 with pivoting and folding dome covers. Material discharge: For each material discharge cone, a central material sump with a diameter of 200 mm. The sumps are equipped with bottom flaps DN 200 with an aluminum housing, steel plate and stainless steel shaft, NBR seal (white), which are operated laterally via remote controls. A 4" material collection line made of special steel is collected on the left side on the operating side in front of the axle unit. Chamber 1 and 2 collected in front of the axle unit and chamber 3 and 4 collected behind the axle unit. At the end of each material line, a 4" annular nozzle is installed for material acceleration. A 4" sight glass is installed behind each annular nozzle. Material discharge via one 4" TW coupling with a blank cover. Agitation nozzles in the sumps. Air piping: An aluminum air collection line is mounted on the left side on the operating side and runs to the rear with a Storz B coupling. Ladder and walkway: One stainless steel access ladder on the front and one on the rear, left side. Aluminum safety walkway on the left. Brake lock when the safety guardrail is raised. Chassis: The saddle plate is equipped with a tested 2" kingpin. Suspension: Axle unit, manufacturer SAF, type INTRADISC PLUS II INTEGRAL, 3 x 9 tons, disc brakes ø 430 mm. The air-sprung axle unit is mounted in FFB aluminum suspension. Axle spacing 2 x 1310 mm. First axle as a lift axle, controllable from the driver's cab, with starting aid. Third axle as a trailing steering axle, lockable via reverse gear and additionally via a switch on the control panel. Braking system: 2-sensor 2-module SLV ABS/EBS pneumatic braking system equipped with a spring-loaded parking brake on two axles. RSS - Rollover Stability Support. Air suspension system: Air-sprung suspension with automatic height adjustment. Lifting and lowering valve mounted laterally on a control panel in front of the first axle. Tires: 6 tires, size 385/65 R22.5, are installed. Rims: Forged aluminum rims, manufacturer Alcoa, type Dura Bright EVO, size 22.5 x 11.75. Offset: 120 mm. Wheel bolt holes: 26 mm. Wheel cover: Single-wheel plastic mudguards, black, attached with stainless steel brackets. Mud flaps mounted on the rear mudguards. Electrical system: 24-volt electrical system consisting of: - a 15-pole socket mounted in front of the saddle plate. - two multi-chamber lights integrated into the rear underrun protection. - yellow side marker lights. - outline lights at the rear. - license plate lights at the rear. - 4 work lights, 2 x left at the discharge (switched via parking lights and additionally via a sw Lajdpfszr A R Hsx Apdeg

Condition: used, machine/vehicle number: WFDFLT21802036332, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Swap-Body Trailer Please note: the images shown are archive photos. #Weights and Dimensions - Gross vehicle weight: 18000 kg - Payload approx.: 14800 kg - Bogie load: 18000 kg - Nose weight: 1000 kg - Unladen weight (base version) approx. only: 3200 kg +/- production tolerance - Overall length with 7820 mm swap body approx.: 10020 mm - Overall width max.: 2550 mm - Frame height lowered approx.: 1010 mm - Frame height raised approx.: 1390 mm - Frame height in travel position approx.: 1070 mm Laedszu I D Rspfx Apdjg - Parking height approx.: 1040 to 1320 mm - Standard stop to front locking device approx.: 985 mm - Locking distance: 5853 mm - Coupling height approx.: 380 mm - Drawbar length set from 7820 mm swap body stop approx.: 2200 mm - Parking heights apply on level ground. - The towing vehicle must have a similar lift range to the trailer, otherwise the unit will stand at an angle. #Chassis - Swap-Body Centre-Axle Trailer - Fine-grain steel welded construction - Front stop, longitudinally adjustable and foldable - 2 pairs of removable guide rollers, front and rear - 4 twist locks with sturdy brackets on a 20" base, for 7.45 m and 7.82 m swap bodies (note: combined with the underrun protection, this protrudes on a 7.15 m swap body) - 1 pair of geared landing legs front, with straight foot and single-side operation on the RHS (direction of travel) - 1 pair of geared landing legs rear, with straight foot and single-side operation on the RHS (direction of travel) - 2 wheel chocks with holder - Aluminium side impact protection - Steel rear underrun protection - Full-width rear mudflaps (not in combination with forklift pockets) - Half-shell mudguards - Mudflaps #Coupling Gear - Centre-Axle Trailer - Drawbar with certified 50 mm tow eye, haulage-specification version - Low-mounted drawbar coupling, 2200 mm - Coupling height: 380 mm #Axles and Suspension - SAF disc brake axles - Axles/chassis laser-aligned - reduces tyre wear and fuel consumption - Air suspension #Braking System - 2-line air braking system - Colour-coded pipework for easy servicing - Air reservoir capacity 208 litres - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, with connecting lines to the towing vehicle, connection on the RHS - 24-volt EBS electronic braking system with EBS connector at the front, with connecting cable, connection on the RHS - Warning: this trailer must only be towed by towing vehicles that guarantee the effectiveness of the ABS! - With lift-and-lower valve, hold function in both lowered and raised positions #Wheels and Tyres - 445/45 R19.5" make of manufacturer's choice - Steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED marker lights at the sides - 2 white front position lights - 2 white/red rear tail lights - 2 x 7-pin anti-mismatch connectors at the front, with connecting cable, connection on the RHS - LED work lights on both sides (switched via reversing light) - 2 additional LED work lights at the rear, switched via reversing light - 1 LED work light at the front, centred between the beams, facing rearward, switched via reversing light #Country of Registration / Plates - Germany - With Dekra inspection and certificate (in accordance with §13 EC-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape to ECE R 048, white at the sides and red at the rear

Condition: used, Used stainless steel tank Item number: 10823 Volume: 1260 liters Type: Standing on 4 feet Material (wetted parts): 1.4301 / AISI 304 Design: Single-walled Operating pressure according to nameplate: ATM Max. operating temperature: +0 / +20 °C Tank dimensions: Inner diameter: 1190 mm Outer diameter: 1210 mm Cylindrical height: 920 mm Ljdjwcd Taspfx Apdsag Overall width: 1370 mm Overall length: 1370 mm Overall height: 1970 mm Height of feet: 1000 mm Materials: Inner: 1.4301 / AISI 304 Outer parts: 1.4301 / AISI 304 Features: Nameplate: Yes Outlet diameter: 47mm Distance from drain to floor: 220mm Drain valve: Disc valve Removable lid

Condition: good (used), axle configuration: 3 axles, first registration: 10/2011, suspension: air, color: green, Year of construction: 2011, Make axles: SAF Empty weight: 5.400 kg Carrying capacity: 33.600 kg GVW: 39.000 kg Ledpfx Aez D Eafjpdsag Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks = Remarks = Schmitz Cargobull SCF 24 / SAF + Disc / 1x Extendable / 1x Lift Axle / All containers

Condition: good (used), axle configuration: 3 axles, suspension: air, color: silver, Year of construction: 2011, Year of manufacture: 2011 Make axles: Schmitz GVW: 39.000 kg Laodpfxsz D Ed Rs Apdjg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks = Remarks = Schmitz Cargobull SCF 24 / SAF + Disc / 1x Extendable / 1x Lift Axle / All containers

Year of construction: 1995, condition: excellent (used), Dual-fuel burner Weishaupt GL40/1B – TM version Output: 450-2550 kW Year of manufacture: 1995 Oil flow rate: 45-215 kg/h With existing Dungs DN65 valves. Worldwide shipping possible. Мы говорим по-русски! Please arrange a viewing by phone beforehand. Preferably sold to dealers, businesses, or for export. Lajdpfx Apjhl R Twsdsg All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading is possible.

Condition: used, Year of construction: 2002, Overview This Alfa Laval VNPX 510 SFD-34C is a self-cleaning disc-stack separator built in 2002 by Alfa Laval (Tumba, Sweden). The VNPX series is an established solids-ejecting clarifier platform for the food and beverage industry; this unit was last operated in a brewery. The separator is currently disassembled: frame, bowl section, drive motor and fittings are stored as individual components, which makes inspection of the main parts straightforward and simplifies transport. The scope of delivery includes the 22 kW ABB drive motor, a stainless steel sludge collection vessel of approx. 150 l and the Siemens SIMATIC C7-633 control system with a separate touch panel and switch cabinet. Technical data Lajdpfxjzpai Is Apdjg - Manufacturer: Alfa Laval (Tumba, Sweden) - Model: VNPX 510 SFD-34C - Year of manufacture: 2002 - Machine type: self-cleaning disc-stack separator (clarifier) - Max. bowl speed: 6,240 rpm - Motor shaft speed: 1,500 rpm, 50 Hz - Recommended motor power: 22 kW - Max. density of feed: 1,100 kg/m³ - Process temperature: -5 to +100 °C - Control: Siemens SIMATIC C7-633 incl. separate touch panel and switch cabinet Equipment - ABB drive motor, 22 kW (separate) - Stainless steel sludge collection vessel, approx. 150 l - Siemens SIMATIC C7-633 control with touch panel and switch cabinet - Valve and fittings assembly with flow meters and pressure gauge - Operating manual (German) Condition Used. The separator was dismantled for operational reasons and is sold disassembled; the motor is separate. The components were stored outdoors. Availability Immediately. Location: Germany.