Used Dms Ventilapplikator for sale (487)

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker S200 / Root Stock Shear / Stump Shear / In stock & immediately available / NEW Jaw opening (mm): 410 Cutting width (mm): 240 Own weight (kg): 170 Recommended oil flow rate (l/min): approx. 25 - 60 Recommended operating pressure (bar): 180 - 240 Carrier machine operating weight (t): 1.5 – 6 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Our warehouse holds a wide selection of various Westtech products available for immediate delivery! Mr. Herden (Tel. ...) will gladly assist you. Upon request, we can also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. Iodpfx Ahoykhrujnjtl We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We can supply you with the complete range of Westtech Woodcracker products! Errors and interim sales excepted! = Further information = Intended use: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Liebherr Likufix SW33 Adapter Plate / NEW / In Stock & Immediately Available Price: €4,690.00 net / €5,581.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - Likufix SW33 adapter plate is pre-fitted for 4 lines - Also available from stock with a connector for a leakage oil line! Surcharge: €375.00 net - Excavator class: 8t – 20t - Weight: 160 kg Suitable for many attachments such as hydraulic hammers, sorting grabs, as well as for the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 Iodpfx Aeykhucohnotl - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. Mr. Herden (Tel. ...) will be happy to advise you. On request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner for OilQuick, Holp, Gierking GMT, Weber MT, Westtech, DMS, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! = Further Information = Intended use: Construction Please contact Marius Herden for more information.

Condition: new, For inquiries regarding the attachment, Mr. Herden is happy to assist you (by phone at ...). Liebherr Likufix SW48 Adapter Plate / NEW / in stock & immediately available Price: €5,690.00 net / €6,771.10 gross Iedpfjykhuijx Ahnjtl Two hole patterns available. Drawings of the hole patterns can be found in the photos. - Likufix SW48 adapter plate is fitted with 4 connections - Also available from stock with connector for leakage oil line! Surcharge: €375.00 net - Excavator class: 15t – 35t - Weight: 258 kg Compatible with many attachments such as hydraulic hammers, sorting grabs, and also suitable for the following Westtech products: Small hole pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large hole pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All compatible Westtech products are also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and ready for immediate delivery. Mr. Herden (Tel. ...) will gladly assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Holp. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Westtech. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telescopic handlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = More information = Intended use: Construction Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (telephone: [please insert number]). Westtech Woodcracker C300 Felling Grapple / incl. Collector Grapple / incl. ALBACH Quick Coupler / BRAND NEW unit / in stock & immediately available - Softwood cutting diameter (mm): 350 - Hardwood cutting diameter (mm): 300 - Grapple opening width (mm): 1,430 - Shear opening width (mm): 550 - Own weight (basic – fully equipped) (kg): 750 – 1,080 - Recommended flow rate main circuit (l/min): 70 – 150 - Recommended flow rate auxiliary circuit (l/min): 45 – 60 - Recommended operating pressure (bar): 280 - Carrier vehicle service weight (t): 12 – 18 Equipment features: - incl. Autospeed function - incl. collector grapple - incl. hydraulic changeover between collector grapple and cutting unit (Sennebogen single circuit system) - incl. ALBACH quick coupler We stock numerous adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) which are immediately available. At our warehouse, we offer a very large selection of various Westtech products, all available for immediate delivery! Mr. Herden (Tel. [please insert number]) will be happy to assist you. Financing options available upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction equipment - Mercedes-Benz - Iveco With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale reserved. = Additional information = New: Yes Isdoy E Et Tjpfx Ahnstl Part suited for: Forestry applications For further information, please contact Marius Herden.

Condition: excellent (used), Measuring gauge Ijdpjy Ipbmjfx Ahnjtl Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Year of construction: 2022, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Magni boom with winch JW2000 / 2 tons / suitable for RTH & TH series / year of manufacture: 2022 / DEMO unit / in stock & immediately available Price: €6,990.00 net / €8,318.10 gross - Max. load capacity: 2,000 kg - Length: 2,390 mm - Rope diameter: 10 mm - Working length of rope: 25,000 mm - Rope payout speed: 24 m/min - Automatic attachment recognition: yes - Lattice boom with integrated winch - Lattice boom construction made of tubular profiles with an optimal weight/performance ratio - Winch with pressure roller and hydraulic end switch for reeling in/out the rope Itodezb Ugmjpfx Ahnsl This attachment is suitable for the RTH and TH series. Product code: ATT-04-015 We have many other Magni attachments in our warehouse that are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 019995 = Further information = New: No Intended use: Construction Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Greentec HS 212 Branch Cutter / incl. MS08 adapter plate / NEW unit / in stock & immediately available Price: €6,290.00 net / €7,485.10 gross - Working width: 2,100 mm - Cuts per minute: 250 - 450 - Max. branch diameter: 60 mm - Oil flow: 50 l/min - Pressure: 190 bar - Working speed: 5 km/h - Weight: 132 kg Optional: Flow divider with pressure relief valve - freely adjustable (50-90 l/min at 190 bar) = €660.00 net Description: - Clean and smooth cut of small branches and larger limbs up to max. 60 mm diameter - Sturdy frame beam made of high-strength steel Itsdezk S Tbjpfx Ahnjl - Lightweight construction - Low weight and flat housing for optimal visibility - HIGH-POWER blade drive via planetary gearbox with constant torque during direction changes - 100% linear blade movement thanks to a cast iron constant power motor - Max. 450 cuts per minute - PRO CUT blade (Made in Germany) - Fine-toothed double-cut blades (ground on both sides) increase both the surface quality and the working capacity - Special blade guide made of wear-resistant plastic ensures smooth operation and long service life - Blade fingers with branch-saving function = remaining branches are not damaged - Long service life thanks to hardened and galvanized material - Easy and quick blade change - Sliding skid prevents damage from ground contact - Minimal wear and low maintenance - High working speed up to 5 km/h - Variable mounting position of the blade bar - Required hydraulic connections: 1x DW (1x supply + 1x return) Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Greentec products that are immediately available! Mr. Herden (tel. number) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application forestry Please contact Marius Herden for more information.

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model - Electro-hydraulically steered trailing axle, single-tired - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions acc. to Euro 6 Stage E, - with SCR, particulate filter and exhaust gas recirculation - Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake. - Braking power 510 hp / 375 kW (D13K) - Meets ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel fuel - driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB port, 3-way - 8 speakers - High instruments: digital driver information display, 12 with 4 views - Second driver information display, 9-inch touchscreen color display - TOMTOM navigation system - AGM batteries, 2 x 210 Ah - Battery indicator in the display (Volts, Amperes and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable content 64 liters - Tank cap lockable - Tank filler neck, splash guard - Exhaust outlet to the rear - 2 foldable wheel chocks, transport mounting - Marker lights on the rear and sides - Trailer coupling with D-value = 190 kN for G-150/G-260 hole pattern - Trailer coupling to frame end 85 mm - Rear frame length 4395 mm, measured from drive axle / 1st drive axle - Rockinger 400 G-150 trailer coupling (Note D-value / max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Trailer/semi-trailer connection Duomatic - Trailer connections in the center - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle Itedjzl Irpepfx Ahnjl - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x trailing axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle - Scavenge pump, electric - Gearbox/I-Shift operation via control unit on the driver's seat - I-Shift driving mode: Standard, Performance and Economy - Autoreturn in Economy mode - No manual intervention in automatic mode, without kickdown - Cruise control - Gearbox oil cooler, basic, water/oil - Air compressor 2-cylinder, 1100 l/min., for vehicles/combinations with increased air demand - Air intake front with normal air filter - Alternator 150A / 4200W - External noise acc. to ECE R51.03 Phase 2, with low-noise certificate and L-sign - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox side, connection: 1 DIN rear for pump - Auxiliary drive on the gearbox, power max. 600 Nm - Dynamic equipment: seats in fabric, lateral vinyl (blue/dark blue) with interior in fabric grey - Driver's seat Comfort, air-sprung, heated, seatbelt in the seat - Passenger seat Standard, air-sprung - Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net - Stand-up heater cab, 2 kW - Storage space under the bunk - Cool box with freezer compartment 33 L un

Year of construction: 2025, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you by phone. Westtech Woodcracker CS610 compact grapple saw / incl. Power-Tiltator / Year of manufacture: 2025 / DEMO unit / in stock & immediately available / Excellent condition! Price: €38,190.00 net / €45,446.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm Iodpfx Ahoy Nv Ehjnetl - Own weight (basic - fully equipped): 830 - 1,060 kg - Recommended hydraulic flow: 65 - 110 l/min - Recommended auxiliary hydraulic flow: 40 - 60 l/min - Recommended operating pressure: 230 - 280 bar - Carrier vehicle operating weight: 15 - 20 t - Saw box: actively suspended - Chain lubrication: grease Equipment: - Including Power-Tiltator We stock a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.)—available immediately. Our warehouse has a very large selection of various Westtech products, available immediately! Mr. Herden (Tel.) will be happy to assist you. Financing offers available upon request. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Errors and prior sale excepted! Internal No.: 422068 = More information = New: No Part suitable for: Forestry applications Please contact Marius Herden for further information.

Condition: used, mileage: 2,96,000 km, power: 427 kW (580.56 HP), first registration: 09/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment and technical specifications: Itsdoyv Uhujpfx Ahnel *General Information:* * Chassis serial number: 2134791 * Chassis type: R 580 A6x2NB * VIN code: YS2R6X20002134791 * Maximum permissible gross vehicle weight: 66 tons ----*Technical Data:* * Engine: DC16 106/580 hp, 16-liter displacement, 426 kW (580 hp), Euro 6 * Transmission: GRSO905R, Opticruise, Overdrive, Economy, Standard, Performance modes * Wheelbase: 3550 mm * Axle configuration: 6x2 * Maximum permissible gross vehicle weight (technical): 30 tons * Maximum speed: 89 km/h (legally 90 km/h) * Front axle load: 9000 kg * Rear axle load: 12700 kg (first axle), 8300 kg (second axle) * Tire size: Front axle 385/65 R22.5, Rear axle 295/80 R22.5, Tag axle 295/60 R22.5 * Rim material: Aluminum (Alcoa DuraBright) * Rim diameter: 22.5 inches * Brakes: Electronic Braking System (EBS7), Hill Hold, Emergency Braking System, ABS/EBS 6S/5M * Suspension: Air suspension front and rear, 2-spring air suspension rear * Steering: THP90, Ratio 18.6:1, adjustable steering wheel (tilt and telescopic), airbag in steering wheel ----*Electrical System:* * COO8 * LED headlights * LED fog lights * LED taillights * LED daytime running lights * Remote control for climate control and infotainment * Bluetooth * USB charging ports * ESP with deactivation function * Navigation system with European maps * Lane change warning system * Reversing signal * Distance sensor system (DIS2) ----*Cab:* Type CR, Length 20 dm * High roof * Color: White (Ivory White) * Tinted windshield * Rain sensor * Air conditioning (Premium) * Auxiliary heater (WTA cab and engine heater 6 kW) * Electrically adjustable sunroof * Roof rails * Electrically adjustable and heated mirrors * Coffee machine in the roof console * Cooler box in the storage compartment at the rear, lower side, driver's side * Leather seats (driver and passenger) * Driver's seat ventilation * Premium infotainment system AUS4 * DAB+ / Navi / Bluetooth / AUX-IN * TV preparation, driver's side * Signal horn on the cab roof * Electric windows * Sun visor, exterior and interior * Electric mirrors and front mirror with heating * Navigation system * Reversing camera * Auxiliary heater * Auxiliary air conditioning * Automatic climate control * 2 sleeping berths * Leather seats * Leather multifunction steering wheel * Refrigerator ----*Retarder * Adaptive cruise control * Lane keeping assist * Emergency brake assist * Hill start assist ----*Differential lock, drive axle * 3rd axle lift axle * Aluminum rims * Full air suspension ----*Superstructure & Accessories:* * HMF 3220 K4 loading crane * 4 outriggers * RCL 5300 system * Radio system * 2 hydraulic supports * Load capacity at 12.3m = 2170 kg * Load capacity at 4.6m = 6410 kg * Sliding fifth wheel ----*Tire dimension VA: 385/65R22,5 * Tire dimension HA: 295/60R22,5 * Fuel tank: 400 liters * AdBlue tank: 80 liters * Technical gross vehicle weight: 30000 kg * Unladen weight: 14275 kg * Overall length: 7060 mm * Wheelbase: 3550 mm ----Vehicle number: 11945 ----Errors and prior sale excepted ----Advertisements and various inscriptions have been digitally removed. ----We are happy to assist you with all formalities that arise when purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: ----Trade-in of your old vehicle * TÜV/SP inspection (technical inspection and emissions test) * Complete export processing * Arran

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model - Electro-hydraulically steered trailing axle, single-tired Iedoywfxyopfx Ahnotl - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions acc. to Euro 6 Stage E, - with SCR, particulate filter and exhaust gas recirculation - Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake - Braking power 510 hp / 375 kW (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel fuel - Driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB port, 3-way - 8 speakers - High-performance instruments: digital driver information display, 12 with 4 views - Second driver information display, 9-inch touchscreen color display - TOMTOM navigation system - AGM batteries, 2 x 210 Ah - Battery indicator on the display (Voltage, amperage and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable capacity 64 liters - Lockable tank cap - Fuel filler neck, splash guard - Exhaust outlet to the rear - 2 foldable wheel chocks, transport mounting - Marker lights on the rear and sides - Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern - Trailer cross member to frame end 85 mm - Rear frame length 4395 mm, measured from the drive axle / 1st drive axle - Rockinger 400 G-150 trailer coupling (Note D-value / max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pole - Trailer/semi-trailer connection Duomatic - Trailer connections in the center - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x trailing axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle - Venting pump electric - Gearbox/I-Shift operation via control unit on the driver's seat - I-Shift driving mode: Standard, Performance and Economy - Autoreturn in Economy mode - No manual interventions in automatic mode, without kickdown - Cruise control - Gearbox oil cooler, basic, water/oil - Air compressor 2-cylinder, 1100 l/min, for vehicles/combinations with increased air requirements - Air intake at the front with normal air filter - Alternator 150A/4200W - External noise acc. to ECE R51.03 Phase 2, with low-noise certificate and L-sign - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox side, connection: 1 DIN at the rear for pump - Auxiliary drive on the gearbox, power max. 600 Nm - Dynamic equipment: Seats in fabric, side panels in vinyl (blue/dark blue) with interior in fabric grey - Driver seat comfort, air-sprung, heated, seat belt in the seat - Passenger seat standard, air-sprung - Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net - Stand-alone cab heater, 2 kW - Storage spa

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Westtech Woodcracker CB150 crane-mounted harvesting grapple / NEW / in stock & immediately available - Cutting diameter softwood (mm): 150 - Cutting diameter hardwood (mm): 120 - Grapple opening (mm): 800 Iedpfxeyxkq Re Ahnstl - Own weight (basic – fully equipped) (kg): 310 - Recommended oil flow main circuit (l/min): 30 – 60 - Recommended operating pressure (bar): 190 - Carrier vehicle operating weight (t): Crane We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Our warehouse holds a very large selection of various Westtech products, ready for immediate delivery! Mr. Herden (tel.) will be happy to assist you. Upon request, we are also pleased to provide a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Subject to errors and prior sale! = More information = New: Yes Unladen weight: 310 kg Part suited for: Application in forestry Please contact Marius Herden for further information.

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Manufacturer: Huber Type: RoD 1500 Year built: 2005 Driving force: 18,5 kW Throughput m³/h: 12 m3/h Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Iedpoy Edfbefx Ahnetl Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Isdpfx Ahoyhzhnenetl Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Itjdpfx Aoyhzhzshnjl Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Iedjyltvuspfx Ahnjtl Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni Telescopic Handlers. We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Condition: used, For enquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (via phone). WEBER CR 7 CCD 2.0 Hatz Diesel Reversible Vibratory Plate / New unit / In stock & available immediately Sales price: €10,190.00 net / €12,126.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series impress with their high compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced running characteristics, high smoothness, and low hand-arm vibration ensure excellent operator comfort. CR 7 – Power and Comfort in Perfection: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle and hydraulic control lines routed securely inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with height-adjustable handle - Protection of machine and engine through protective frame and fully enclosed engine cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing as all maintenance points are easily accessible - Safe and quick loading thanks to large, fold-down lifting eye - Secure lashing for transport with additional lashing points on the engine console - Increased operator convenience with electric start, hour meter, engine oil and battery voltage monitor - Areas of application: road and civil engineering, trench construction, landscaping, subbase for paving areas, settling pavers, and compacting sand, gravel or crushed stone COMPATROL® 2.0 Compaction Control: - COMPATROL® 2.0 enables uniform and comprehensive compaction - Weak points in the soil can be identified and rectified in time - User-friendly, self-explanatory LED display - Up to 25% time/cost savings due to reduced compaction passes Technical data: Engine: Hatz Diesel Max. engine output: 7.5 kW (10.3 HP) Weight: 477 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm On request, we can also provide a financing offer. We are official dealer and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telescopic handlers, JCB construction machines, Mercedes-Benz, and Iveco. Iodpfsymv Shox Ahnstl Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to prior sale and errors. = Additional information = Condition: New Engine make: Hatz Contact Marius Herden for further information.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden is at your service (by phone). WEBER CR 8 Hatz Diesel Vibratory Plate / New machine / In stock & immediately available. Sales price: €10,490.00 net / €12,483.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series impress with their high compaction performance and maximum efficiency. They are the first choice for compaction tasks ranging from classic road and civil engineering to paving work. Balanced running characteristics, high smoothness, and low hand-arm vibrations ensure a high level of operator comfort. CR 8 – The new top class: powerful, robust, reliable: - Infinitely variable forward and reverse travel - Hydraulic switching for throttle and hydraulic controls integrated and protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable handlebar - Protection of machine and engine by robust protection frame and full engine enclosure - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing, as all service components are easily accessible - Secure and fast loading thanks to large, folding lifting eye - Safe lashing for transport with additional lashing eyes on the engine console - Enhanced operating comfort with electric start and hour counter - Areas of application: road and civil engineering, trench work, sub-base for paving, and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Max. engine power: 10.3 kW (14.1 HP) Weight: 601 kg Iedjymv Szjpfx Ahnotl Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm On request, we can also provide a financing offer. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the full range of Weber MT equipment for you! Errors and prior sale excepted. = More information = New: Yes Engine brand: Hatz Please contact Marius Herden for further information.

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: CD072150, Hosokawa Solids Container Scale BSG – Batch Discharge Scale – Year of Construction 2021 For sale is a Hosokawa Solids container scale, type BSG, for the precise gravimetric batch dosing of powders and bulk materials. The system was manufactured in 2021 and is in very good used condition. It consists of the container scale with discharge, a stainless steel filter housing with cartridge filters, a weighing system, an Endress+Hauser level sensor, and Nord geared motors. An operating manual is available. The control system and switch cabinet are not included in the scope of supply. Technical Data Manufacturer: Hosokawa Solids Solutions GmbH Type: BSG Container Scale (Batch Discharge Scale) Year of Construction: 2021 Container Volume: 30 dm³ Container Tare Weight: approx. 75 kg Max. Product Temperature: 50 °C Max. Total Weight: approx. 150 kg gross Iedezim D Sspfx Ahnjtl The machine is suitable for the dosing of powders, granules, and other bulk materials in the plastics, chemical, food, and recycling industries. Inspection can be arranged at any time. Loading can be organized.

Condition: used, Year of construction: 2000, Machine offer Manufacturer: OMSO Machine designation: DM 385/6 BOX Year of manufacture: 2000 Operating hours approx.: 31,950 Number of printing stations: 6 Iodpfx Ahsw D R Aqjnetl Number of printing units: 6 Number of bottom printing stations: 2 Number of bottom printing units: 2

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Damak 176-pocket intermediate proofer with adjustable timings for dough resting. Fitted with removeable pockets for ease of cleaning. Manufacturer - Damak Makina. Model - DM IP 176. Date of manufacture - 2021. Input height - 800mm. Output height - 1550mm. Electrical requirements - 415 V / 50 hz / 3 phase. Power - 5 kW / 13 Amps. Itedjx I Sn Nepfx Ahnel Please note - the front panel is missing on this machine (as per photos).

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: LR2009MAHEDEDM100PO1, type of input current: AC, total width: 1,150 mm, total length: 2,850 mm, total height: 1,900 mm, overall weight: 1,100 kg, outer diameter of label roll: 550 mm, inside diameter of label roll: 76 mm, input voltage: 380 V, compressed air connection: 6 bar, For sale is a fully automatic mask machine DM-85-P (CE version) with 380V connection – suitable for masks Type II and IIR. The mask machine is designed to process multi-layer fabrics into various masks by means of forming folds, ultrasonic welding, ear loop welding, and nose wire welding. The fully automatic mask machine Lianrou LR-DM-85-P is a late-generation model and is also a patented product by LIAN ROU. Compared to traditional disposable mask machines, it offers the following advantages: First, the LR-DM-85-P requires only one unit to complete the entire mask production process, which significantly reduces the space required for the production line; second, it features an integrated production design with an aesthetically clean and organized structure. Most importantly, it is equipped with a range of reliable safety features, thus ensuring a safe operating environment for the operator. In summary, this machine stands out for its excellent cost-performance ratio and high reliability. Technical data / Notes: Model: DM-85-P Design: Electric-Pneumatic Voltage: 380V Itjdpeya Hdbjfx Ahnol Certification: CE Manufacturer’s documentation and wiring diagrams included If interested, please get in touch – viewing by appointment possible.

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. Itsdju Nu Nkopfx Ahnel *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm Itedeu Nfibjpfx Ahnsl distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Year of construction: 2023, condition: new, Aluminum angle conveyor belt with substructure including adjustable feet and machine feet to level unevenness horizontal area: 3,750mm rising area: 3,200mm angle of inclination at the bend 45° total conveyor belt length measured on the ground: 6,000mm discharge height: 2,500mm horizontal height: 250mm design: aluminum construction - double profile reinforced 90x45mm drive roller + deflection roller S235 steel welded and machined Ø100x520mm crowned, shaft fixed with clamping bearings. Drive: slip-on gear motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Iodpoht Uzaefx Ahnotl Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC including corrugated edges PVC green Conveyor belt width: 500mm 2 corrugated edges 40 high, 35mm wide, high frequency welded 46 T-40 studs, approx. 300mm pitch Belt material: 2-ply, particularly stable across the belt In the bend area, the belt is guided on both sides with 3 hold-down rollers each. The belt is designed with a 70mm edge-free zone on both sides. Due to the corrugated edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 290mm, results as follows: (top view) transverse arrangement 70+35+290+35+70mm Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator