Used Dust Extraction Fan 3.0 Kw for sale (40,825)

Condition: used, Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 Ijdpfx Aisuqf Ilozsaw -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm -Speed: 2800 rpm -Inlet: Ø 105 mm -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg

Condition: good (used), Fan, ventilator, blower, duct fan, pipe fan Iaodpfx Aeuqq N Ueizew -Manufacturer: SEW-Eurodrive ebmpapst, fan blower ventilator -Type: A4S 200-AA 02-01 0.042 kW / 1350 rpm -Voltage: 230 V -Dimensions: 225/210/H210 mm -Weight: 2.9 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Coolant pump: Coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm Ijdpfov Iyl Rjx Aizjaw -Overall dimensions: 500/340/H880 mm -Weight: 74 kg

Condition: excellent (used), Year of construction: 2020, Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan Ijdpfx Aioxd Tr Sjzsaw -Housing: made of stainless steel -Condition: unused stock, function tested -Manufacturer: Fläkt Woods, Axial fan Axial fan -Type: 112JM/31/4/6/223S D160L -Power: 15 kW 1465 rpm -Number: 2 fans available Price: per piece -Dimensions: 1350/1350/H830 mm -Weight: 300 kg/unit

Condition: used, Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan -Manufacturer: Ziehl-Abegg, axial fan EAC GR45G-4EK.41.2R -Engine: RH350-4EK Iodpfx Ajp A A R Dsizsaw -Power: 0,30 kW / 1330 U/min -Fan wheel: diameter 365 mm -Protection rating: IP44 -Dimensions: 430/430/H235 mm -Weight: 7.7 kg

Condition: used, Fan, ventilator, electric motor, blower, emergency ventilation fan, smoke gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, axial wall fan -Manufacturer: Dietz, axial fan axial wall fan motor type F DR 71 5/4 -Power: 0.37W -Connection: inlet Ø 515 mm -Dimensions total: 640/640/H335 mm Iedpfx Asupphyjizoaw -Weight: 13 kg

Condition: good (used), fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Fan: axial fan axial fan -Motor: Type D 564 0.11 kW / 1350 rpm -Total dimensions: Ø 440 x 200 mm Iaodpfxouqq Nze Aizow -Weight: 3.5 kg

Condition: used, fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan Iaedpfxeuqq Sce Aizew -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: FA061-8EA.6F.1 -Power: 0.36 kW / 680 rpm -Number: 1x fan available -Dimensions: Ø 610 x 160 mm -Weight: 14.9 kg.

Condition: good (used), Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, diagonal fan, duct fan, diagonal fan Isdorxgv Njpfx Aizsaw -Manufacturer: Maico, axial fan, tube fan, diagonal fan -Type: EDR 71-0080.0665 -Power: 3.74 kW -Conveying volume: approx. 23140 m³/h -Quantity: 3 pieces available -Price per piece -Dimensions: 730/720/H720 mm -Weight: 48 kg/piece

Condition: good (used), Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, stable fan -Manufacturer: Multifan, built-in fan suction fan type 6E63 Ijdpfx Aeuncx Asizjaw -Engine: 0.60 kW 900 rpm -Conveying volume: 12020 m³/h -Fan: Ø 630 mm / Ø 640 mm -Protection class: IP 54 -Number: 2x fan available -Price: per piece -Dimensions: Ø 630 x 340 mm / Ø 640 x 340 mm -Weight: 13.1kg / 13kg

Year of construction: 1960, condition: used, Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, duct fan, Iodsunn I Aopfx Aizeaw -Manufacturer: Lange & Breithaupt, Troca multi-fan type A 500 -Power: 3.4 kW / 1400 rpm -Volume flow: 41 m³/sec -Bolt circle: Ø 555 x 10 mm -Dimensions: Ø 595 x 550 mm -Weight: 90 kg

Condition: good (used), Fan, blower, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, axial ventilator, suction fan, high-performance axial fan, stable fan -Manufacturer: Multifan, Axial fan, Duct fan type 6E40 -Motor: 0.17 kW 900 rpm -Flow rate: 3760 m³/h -Protection class: IP 55 -Number: 1x fan available Iodpfxsywib Ee Aizeaw -Dimensions: 500/450/H480 mm -Weight: 10 kg

Condition: good (used), Fan, ventilator, electric motor, blower, axial high-performance fan -Manufacturer:Helios, axial fan axial fan suction fan -Power: 1.1 kW 2880 rpm -Fan: Ø 400 mm -Number: 10x fans available -Price: per piece Ijdpfx Aiswy Nliozoaw -Dimensions: 430/430/300 mm -Weight: 13 kg/piece

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Engine: VEM K11R 160 MX2 -Engine power: 15 kW / 2920 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 160 mm Iajdovt R Akepfx Aizew -Connection output: 150 x 130 mm -Base plate: 580 x 520 mm -Dimensions total: 990/810/H1055 mm -Weight: 365 kg.

Condition: used, Year of construction: 2019, functionality: unexamined, Plymovent Fume Extraction Arm High-quality Plymovent welding fume extraction arm, complete with an extraction fan and electric motor. This unit is suitable for extracting welding fumes, grinding dust, smoke, and other airborne contaminants directly at the source. Professionally dismantled from an industrial production facility and available immediately from our warehouse in Rotterdam, The Netherlands. Manufacturer: Plymovent Model: FUA Year of Manufacture: 2019 Extraction Arm: Flexible articulated extraction arm Fan: Included Motor Manufacturer: Echtop Motor Type: T7112-2 Motor Power: Ijdpfx Ajzmgr Rjizoaw 0.55 kW Voltage: 230 / 400 V Frequency: 50 Hz Speed: 2760 rpm Protection Class: IP55 Condition: Used – Excellent condition Location: Rotterdam, The Netherlands SURPLUS – Industrial Solutions From Surplus to 2nd Life

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Iajdpfx Aijl Dw U Dozjw Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. Iaodsib Dadopfx Aizsw The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Year of construction: 2014, condition: excellent (used), Professional, pneumatic cleaning booth with dust extraction. It is used in power plants, cement and gypsum factories, mills, and companies involved in mixing, including the chemical industry, as well as in metallurgy, where dust can have a very negative impact on the health of personnel. By using cleaning booths, we prevent the spread of dust and hazardous substances to restrooms, changing rooms, etc. Iajdohm E S Ajpfx Aizjw The booth provides personnel with a simple option to clean themselves during work, e.g., before morning and lunchtime breaks, and at the end of the shift. Dust extraction unit, EX version. Year of manufacture: 2014 Filtration area: 16 m2 Capacity: 2500 m3/h Negative pressure: 2400 Pa The unit is in very good condition.

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Iasdpezcqxuefx Aizew Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), OptiAir unit to extract dust when predusting food products with fine flour. Iedpex Hamqjfx Aizsaw

Condition: new, For sale: professional centrifugal fan from the renowned German manufacturer ELEKTROR – Karl W. Müller. This unit is suitable for applications such as ventilation systems, dust extraction, air transport in industrial installations, paint shops, woodworking shops, and production machinery. The fan is in very good visual and technical condition – solid, heavy-duty construction. Technical data: • Manufacturer: Elektror • Model: RD 06 • Motor power: 2.2 kW • Power supply: 230 / 400 V • Speed: approx. 2870 rpm • Frequency: 50 Hz • Airflow: approx. 3600 m³/h • Pressure: approx. 2550 Pa Iajdpfx Ajyuqrloizew • Protection class: IP54 Rectangular inlet and outlet – dimensions visible in the photos.

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications Iaodsuc Unqepfx Aizjw CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Dunli, axial fan -Type: YMF.A4T-630S-7FIIIS01 -Power: 1.4 kW at 1400 rpm -Voltage: 380 volts -Fan wheel: Ø 630 mm / see photos Quantity: 1 piece available Iodpfjylhwgjx Aizjaw -Dimensions: 805/805/H265 mm -Weight: 36 kg

Condition: used, Colour: Grey Empty weight: 250 kg Dimensions (LxBxH): 245 x 65 x 240 cm - Documentation available: No - CE certificate present: No - Suitable for material: Wood dust - Main fan [pcs]: 1 - Number of filter bags [pcs]: 3 - Filter length [mm]: 1200 - Filter diameter [mm]: 500 - Filter surface area [m²]: 7 - Connection diameter [mm]: 250 - Number of connections [pcs]: 1 - Options: Collection bags - └ Number of bins/bags [pcs]: 3 - Transport dimensions: 2450mm x 650mm x 2400mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iajdpfx Asyy R Ryeizsw Yorick Diebels

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Iaodpfey Sz Dnex Aizew Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140