Used Easy Step Easy Step Bautreppe for sale (8,662)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA06, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Fpsdpfx Afsykua Sepsi F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations Fpsdpfxoykubie Afpoi A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Fsdpfx Afsykty Depspi Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fedpoykuhpefx Afpopi Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: new, Year of construction: 2026, Step adapter for power tools, consisting of four elements that allow diameter reduction from 100 mm to 68/46/40/35 mm. Fpjdpjycvhnsfx Afpoi

Condition: used, Heavy-duty coil carrier, transport trolley Very robust, custom-built Load capacity: approx. 5 tons Length: 1500 mm Width: 1300 mm Height: 460/660 mm Ground clearance: approx. 250 mm Overall length with fork pockets: 1780 mm Fork insertion distance: 580 mm Fork width: max. 200 mm Fork thickness: max. 75 mm - 4 steel swivel casters with 2 wheels each (wheel outer diameter approx. 220 mm) (steel wheels) - With fork pockets for easy transport with a forklift - Locking pins to secure in the fork pockets For transporting coils, shafts, sleeves, etc. with a forklift. The trolley can be moved fully loaded within the factory using a small forklift. Fpjdef Axnmopfx Afpji Weight: 585 kg Overall length: 175 cm Overall width: 130 cm

Condition: new, functionality: fully functional, A new log step feeder will be made to order based on your technical requirements. Fpedpsyfmn Rsfx Afpoi

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm Fpodpfxod Iipxe Afpsi band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 940 mm total power requirement 1,5 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Fedpfxjfgyias Afpopi Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission Fodpfx Afsfgyicepepi · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed Fpodpjfn Andefx Afpsi • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush Fpjdpfxjd Iiptj Afpoi • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Fpedpfxjnab Rlj Afpei We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: new, diameter 150 mm workpiece length 1300 mm work piece width 800 mm max. dia. of grinding wheel 150 mm turning speed range 0 - 2830 U/min work height max. 945 mm milling-head swivable +/- 180° engine output 1.5 kW weight of the machine ca. 230 kg. dimensions of the machine ca. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents Fjdpfexab Hpjx Afpopi slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,878 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB Fpsdpfx Afoxd Hpkepoi · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,929 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m Fpsdpfx Ajxd Hxlsfpji · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,878 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB Fpsdpfoxd Hzaex Afpji · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,880 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ Fpodpfexd Ex Rjx Afpsi · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,878 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l Fpjdpfx Afjxd Hf Sspoi · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,878 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l Fedpfxoxd Enfj Afpspi · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Electric press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty Fpsdpfxjrp Dp Ts Afpsi - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: as good as new (ex-display), Year of construction: 2023, heating capacity: 7 kW (9.52 HP), tank capacity: 350 l, inner dimension height: 600 mm, inner dimension length: 900 mm, inner dimension width: 650 mm, input voltage: 400 V, input frequency: 28,000 Hz, High power ultrasonic cleaning machine Ultratecno EASY-350L. Demo machine from 2023 used for presentations and exhibitions by the distributor in Poland. Excellent condition, like new. Highest quality of components and several innovative solutions backed by 50 years of experience in manufacturing of ultrasonic cleaning machines. Included pneumatic elevator with platform for max. load 125 kg (max. static load 250 kg). Oil separation tank with pump. Special 50mm insulation. Working chamber dimensions: 900 x 650 x 600 mm. Ultrasound frequency: 28 kHz. Ultrasound power: 2 kW. More technical information included in attached technical sheet. Fjdeq Ruxmepfx Afpjpi Manufactured in Spain.

Condition: used, Simatic Field PG / Programming Device / Programming Computer / Laptop / Step 5, Step 7, ProTool, Notebook SIEMENS Type PG 720 PII Year of manufacture: approx. 1999 CPU: Intel Pentium II RAM: 192 MB Operating system: Windows 98 SE Hard drive: HDD 6 GB Display: 12" LCD (swivel-mounted) Input: Detachable keyboard, trackball Drives: 3.5" LS-120 floppy drive, CD-ROM Interfaces: - EPROM slot - PC/Card (PCMCIA) - MEM-Card - 1 x Parallel port - 1 x Serial port (RS232) 25-pin - 1 x Serial port (RS232) 9-pin - 1 x VGA out - 1 x USB - 1 x MPI/DP 9-pin - external power supply with power cord - In carrying case Installed Siemens software: - Step 5 V7.14 - Step 7 V5.1 - Step 7 MicroWin V5.2 - ProTool V5.2 - ProSave V1.1 Fjdpfsx E Aywex Afpjpi - Logo!Soft V2.0 Overall dimensions (W x H x D): 400 x 270 x 200 mm (in carrying case) Total weight: 6.5 kg Computer operates, display functional, CMOS backup battery drained, Battery for mobile operation not functional, device boots. Siemens software operational.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,390 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 75 kW (101.97 HP), fork length: 1,200 mm, empty load weight: 7,700 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Fedpfx Ajyfivkefpopi Mast type: telescopic Speed class: 20 Technical condition: good Front tyres type: pneumatic Front tyres size: 500/80-24 Front tyres condition: 80–100% Rear tyres type: pneumatic Rear tyres size: 500/80-24 Rear tyres condition: 80–100% 3rd valve,

Condition: ready for operation (used), Masterflex Easy Load 7018-00 Pump Head WE HAVE 6 PCS IN STOCK Fpodjxzd N Nspfx Afpei Price applies to only one unit. Pump Material: PSF/CRS Occlusion: Fixed Shaft lenght: Short L/S Tubing: L/S 13,14,16,25,17&18 Good working condition. Please check out our other listings as well.