Used Electromagnet for sale (309)

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. Hjdev Rpn Topfx Aiyenl We cordially invite you to cooperate!

Condition: new, New tool holders for the FAT Wrocław TUR-50, TUR-560, TUR-63, TUR-630, TUR-710, and TUD 40/50 lathes. Hnsdpfx Ajwak Dtoiyel Spare parts for 4-way tool holders and many other mechanical parts and electromagnetic clutches for metalworking machines are also available for sale. The largest selection in Europe. We ship our parts worldwide.

Condition: new, We specialize in the sale of electromagnetic clutches and brakes and spare parts for them, i.e. clutch and brake plates and discs, brush holders, carrier baskets and others. We have the largest stationary warehouse in Europe of electromagnetic clutches and brakes from Stromag, ZF, Heid, Psp Pohony, Ema Dessau and many other brands. Thanks to our extensive experience, we help in the most difficult situations. To minimize possible production downtime, we ship some clutches within 24 hours of ordering. Hnedpov Tz Abofx Aiyel If you do not know the type of clutch you are looking for, write to us, together we will choose the best solution for your needs. From the Stromag brand we offer mainly: EKE 25, EKB 16, EDE 16 T, EKE / EDE 25 S, EKE / EDE 41 S, EKE / EDE /EFL100 T, EKE 161, EKE 40, EDE 41 T, EKE / EDE 64 S/T, EDE 250, EZE 2, EZE 5, EZE 10, EZE 16, EZE 25, EZE 40, EZE 63, EZE 100, EZF 40, clutch series ERD 2, ERD 5, ERD 10, ERD 16, ERD 16A, ERD 25, ERD 40, ERD 63, ERD 63/75 A EX

Condition: good (used), 1x electromagnet with coolant connection, 500 x 200 x height 125 mm, and 1x electromagnet without coolant connection. Items are sold individually. Hedpjy Agm Aofx Aiyjnl

Condition: new, Year of construction: 2022, A mid range, industrial level sliding table panel saw for cutting sheet material or timber. Standard features include electric rise / fall / tilt of the saw group, table locking in any position and quick angle setting of the cross cut fence. Specification : Ex College A1 Condition - Unused Worktable dimensions 1000X560 mm Sliding table dimensions 3200X350 mm Max squaring capacity with scorer 3350 mm Cutting width max - blade to rip fence 1300 mm - manually adjusted - scale / pointer Tilting blade 0.45 degrees Max cutting height with blade at 90° d.350 mm 118 mm Max cutting height with blade at 45° (d.350 mm) 81 mm Max sawblade dia and bore size 350/30 mm Saw rotation speeds 3000/4600 RPM Dust extraction outlet on machine base d.100 mm Main sawblade motor 4kW (5.5HP) 50Hz Scoring motor 0.55kW (0.75HP) Max squaring with stops 3600 mm STANDARD EQUIPMENT: Carriage in anodised aluminium alloy sliding on high precision adjustable guides in hardened and ground steel Mitre gauge on sliding table 90° quick locking and single degree tilting scale plus reference at 10, 15, 22.5, 30 and, 45 degrees. Quick fence positioning at 90° 10° 15° 22.5° 30° 45° keeping without change the stop position in reference to the blade position. Anodised aluminium profiles Table locking in any position Main saw blade speed change accessed through the table Sliding table with push handle Eccentric workpiece clamp Motorised blade rise / fall Motorised sawblade tilting with electronic read out Electrical safety micro switches on access door Overload switch protection Key locking master witch Emergency stop Electromagnetic main motor brake CE compliant overhead saw guard with extraction point Outfeed side extension table Hsdpjy Efz Rsfx Aiyjnl Complete with set of sawblades - 350dx30x3.2 Z60 and 120dx20x3.5 Z24

Condition: new, Year of construction: 2022, Ex College A1 Condition - Unused Worktable size 1200 x 700mm Useable spindle height 140mm Max spindle protrusion above the table 190mm Spindle rotation speeds 1300 / 2500 / 3500 / 5000 / 6000 / 8500 rpm. Max size of tool retractable under the table 320 x 50mm Main motor power 5.5hp Spindle tilting range -5 to +45 degrees 11/4" dia fixed spindle Adjustable fence max tool dia 250mm Mechanical readout and hand wheel for total fence displacement Mechanical readout and hand wheel adjustment for right infeed fence Hnodpfx Aey Efvheiyol Dust extraction point on hood 120mm Dust extraction point on rear of machine frame 120mm Gravitational display for tilting angle of the spindle - adj by hand wheel Power rise / fall of spindle with decimal height readout Safety interlock on door Safety microswitch on fence assembly Key locking master switch Electromagnetic spindle brake LED light display for spindle speed setting Emergency stop button Pre arrangement (electrically) to accept a power feed unit (Feeder extra cost) Left and right table extensions 200mm total overall length with frontal retractable support bar

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Hnjdpfx Aioyu If Neyel Automatic motor calibration Touch control panel

Condition: excellent (used), functionality: fully functional, Linck High-Performance Frame Saw Type DS 71 Frame opening 710 x 710 mm. Stroke 500 mm. Speed 320 rpm. Hnodpfx Aiouqmu Heyol Hydraulic roller lift with adjustable roller pressure. Hydraulic feed continuously adjustable from 0 to 13 m/min. Automatic overhang adjustment of the saw frame. Electromagnetic remote control. Jansen hydraulic saw blade tensioner with blade mount. 55 kW motor with gearbox. Hydraulic clamping carriage with hydraulic auxiliary carriage. Electrical switch cabinet with control and operator's panel. Dismantled and loaded free on truck. A video showing the saw in operation can be provided on request.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Hnsdpfewf Iq Uox Aiyjl Capacity: 25,000 l/h. Year of manufacture: 2014 Equipped with 2 density meters, 4 electromagnetic flowmeters, and 3 flow control valves for measuring and controlling the fat content in milk and cream. - Including original documentation. - Can be operated via Profibus central system - Can run stand-alone with SCADA system Sattline; we are currently working on integrating a control screen in the control panel to make stand-alone operation easier. - Excellent condition.

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 4,100 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, +++ Buy +++ Lease +++ Rent +++ Mercedes Benz Sprinter 417 CDI downgraded to 3.5t with Rockstroh Drain Jet 100-1 High-Pressure Jetting Installation €1,707.09 per month plus VAT, 60 months term, 40,000 km per year, business customers only Internal Number: #560 Rockstroh Drain Jet 100-1 * Power take-off from Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/minute at 210 bar (38 kW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 80m DN16 * Filling hose reel with approx. 40m DN20 * Approx. 1,000-liter water tank * Water shortage protection * Electric filling system and overflow protection * Electronic speed control * Bypass system * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with slip-resistant surface * Basic set of cleaning nozzles Special equipment: Second battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, single-pole battery disconnect switch, driver assistance system: traffic sign recognition, chassis: stabilization level III, electric parking brake, all-weather floor mats, vehicle without lashing eyes, PTO gearbox lock, front cup holders, A-pillar grab handles, additional main key, rear doors (opening angle 270 degrees), flip-top storage compartment, terminal strip for electric connections (under driver seat), comfort lighting in passenger/cargo area, dashboard loading package (additional USB ports and 12V socket), cable duct at rear portal, cable duct at side wall, navigation system for MBUX multimedia system, PTO 2B with intermediate shaft, programmable special module, crossmember for trailer hitch, crossmember with integrated step, driver’s cab seats: comfort passenger seat, driver's seat comfort, fuel sender for auxiliary heater, cutoff relay with additional battery, reinforced front axle, pre-installation for transmission oil cooling, permissible gross weight 3.88t, soft-close aid for sliding door right Hedpfxsy Ac Ipo Aiyjnl Additional equipment: Third brake light, storage compartment above windshield, storage below passenger dashboard, adaptive brake light, passenger airbag, driver airbag, acoustic package, hill start assist, trailer hitch: electrics for trailer socket, electrically folding mirrors, electrically adjustable and heated mirrors (both sides), mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio), roof light in cargo area with door contact, automatic headlights, entry handle on rear right C-pillar, entry handle for sliding door at partition, assistance systems: turn-off assist, active brake assist, active lane keeping assist, start information assist, Attention Assist (drowsiness detection), Intelligent Speed Assist, breakdown management, crosswind assist, digital tachograph, 250 A alternator, speed limiter 90 km/h, body: standard panel van, instrument cluster with color display, LTE communication module for digital services, fuel tank: main tank 93 liters, full partition wall, multifunction steering wheel, truck registration, ...

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: Hnedpfxsv Iflpj Aiyol • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Hnodpfx Aisw U Tlzoysl Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, This listing is for a Watson Marlow 120S/DV Peristaltic Pump. The unit is in full working condition and is ready for intimidate release. Introducing the Watson-Marlow 120S/DV Peristaltic Pump, a cutting-edge solution designed for precise and reliable dosing and metering applications. This versatile pump is ideal for laboratories and cleanroom environments, offering exceptional performance for a wide range of fluid transfer tasks. Key Features: Flexible Control Options: Choose between manual remote control or automatic operation via 4-20mA or 0-10V inputs, providing adaptability to your specific workflow needs. Impressive Flow Rate: Achieve flow rates from 0.001 to 170 mL/min at 30 psi, making it suitable for both low and high-volume applications. High Motor Speed: With a motor speed range of 0.1 to 200 rpm, the 120S/DV allows for precise adjustments to match your process requirements. Versatile Tube Acceptance: Compatible with 1.6mm wall thickness tubing in five materials, accommodating internal diameters from 0.5 to 4.8mm for diverse applications. Technical Specifications: Model: 120S/DV Pump Head: 114DV flip-top pump head Operating Characteristics: Compact and stackable design, perfect for installation in cleanrooms, LAF, and biosafety cabinets. Benefits: Maintenance-Free Design: The 120S/DV features a virtually maintenance-free operation with no costly seals, valves, or rotors that can leak or clog, ensuring longevity and reliability. Hodpexx Aktofx Aiysnl User-Friendly Features: Speed scrolling, priming, and keypad lock functions enhance usability, making it easy to operate in fast-paced environments. Safety and Compliance: This pump meets international safety standards, including UL and CSA certifications, and complies with electromagnetic compatibility standards, ensuring peace of mind in critical applications. Elevate your liquid handling processes with the Watson-Marlow 120S/DV Peristaltic Pump—the perfect combination of precision, reliability, and user-friendly design for all your dosing and metering needs. Experience the difference today!

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 519 CDI with Leistikow B55 High-Pressure Flushing Installation Internal Number: #527 Leistikow B 55 * PTO from Sprinter * AQUABAR KF32/36 high-pressure pump * approx. 120 liters per minute at 170 bar (40kW) * Pressure control and safety valve * 1st hydraulic high-pressure hose reel for approx. 120m DN19 * 2nd hydraulic high-pressure hose reel for approx. 80m DN13 * Fill hose reel with approx. 60m DN20 * Approx. 1,600-liter water tank * Water shortage safety device * Electric filling unit with overflow protection Hnjdpfxjyzllbj Aiyol * Electronic speed control * Bypass switch * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Adjustable heavy-duty shelf * Basic set of cleaning nozzles Special Equipment: 2nd battery (auxiliary battery) in engine compartment, 3-button remote for central locking, 13-pin trailer socket, 1-pole battery disconnect switch, Driver assistance system: traffic sign recognition, Tachograph controls front under headliner, Suspension: Stabilization Level II, All-weather floor mats, Vehicle without lashing eyes, Transmission lock for PTO, Front cup holder, A-pillar grab handles, Additional master key, Rear doors (opening angle 270 degrees), Storage compartment lid, Terminal strip for electrical connections (driver seat base), Comfort lighting in passenger/cargo area, Dashboard charging package (additional USB ports and 12V socket), Cable duct at rear portal, Cable duct on sidewall, Navigation system for MBUX multimedia system, Fog lights with cornering function, 2nd PTO with layshaft, Programmable special module, Cross-member with integrated step, Sliding door on left cargo/passenger compartment, Rear mud flaps, Seats in cab: Driver comfort seat, Fuel sender for auxiliary heater, Additional battery isolator relay, Reinforced front axle, Pre-installation for transmission oil cooler, Winter package, Soft-closing left sliding door, Soft-closing right sliding door Further Equipment: 3rd brake light, Storage compartment above windshield, Storage compartment below dashboard passenger side, Adaptive brake light, Passenger airbag, Driver airbag, Acoustic package, Hill-start assist, Trailer hitch: trailer socket wiring, Exterior mirrors electrically folding, Exterior mirrors electrically adjustable and heated, both, Exterior mirror with blind spot assist, Outside temperature display, DAB tuner (digital radio reception), Ceiling light in cargo area with door contact, Automatic headlights, Grab handle on right rear C-pillar, Grab handle for sliding door on cargo partition, Driver assistance system: turning assistant, Driver assistance system: active brake assistant, Driver assistance system: active lane-keeping assistant, Driver assistance system: start-off information assistant, Driver assistance system: Attention Assist (drowsiness monitoring sensor), Driver assistance system: intelligent speed assistant, Driver assistance system: breakdown management, Driver assistance system: crosswind assistant, Digital tachograph, 250A alternator, Speed limiter to 90 km/h, Body/configuration: standard high-roof van, Instrument cluster with color display, Communication module (LTE) for digital services, Main fuel tank 93 liters, Continuous bulkhead, Multifunction steering wheel, Truck registration, Marker lights

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. The machine has been completely disassembled and refurbished (including a new spindle bearing). Hnjdeyy R N Aopfx Aiysl Gillardon GB 40 VE Year of manufacture 2003 Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Clamping surface 400x500mm MT 4 chuck Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Shipping for an additional charge. Forklift available for loading.

Year of construction: 2018, condition: ready for operation (used), overall weight: 1,900 kg, total height: 1,900 mm, spindle motor power: 3,700 W, product length (max.): 1,950 mm, number of axes: 3, This 3-axis Proth PSGS 3060 BH / S1 surface grinding machine was manufactured in 2018. It features a table size of 300 × 600 mm and an electromagnetic chuck of the same dimensions. The grinding wheel measures 355 × 38 × 127 mm. Powered by a 3.7 kW spindle motor, this robust machine weighs approximately 1,900 kg. Consider the opportunity to buy this Proth PSGS 3060 BH / S1 surface grinding machine. Contact us for more information. • Table size (L × W): 300 × 600 mm • Electromagnetic chuck size (L × W × H): 300 × 600 × 74 mm • Grinding wheel size (Ø × width × bore): 355 × 38 × 127 mm Additional equipment Hnsdpfx Asydpn Roiyol • Optional: Tools • Optional: Clamping devices

Condition: new, Year of construction: 2025, functionality: fully functional, Cutting range: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Hnsdpjyx H Dtjfx Aiyol Motor power: 5.5 kW Continuously adjustable scoring unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame • Manufacture of precision components to 1/100 mm accuracy • Solid, self-supporting, permanently welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of central support • Automatic roller locking during cutting Saw Beam • Stable, durable steel construction of the saw beam • Automatic saw beam locking with interface detection Saw Unit • Play-free, easy-running guides • Robust bearing of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased operator comfort thanks to largely automated operation • Laser-assisted display for horizontal cuts • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch-over to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized user guidance • Multilingual user interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic cutting process • Infinitely variable feed speed from 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • UPS 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winner (including the Design Prize Switzerland) • Ergonomically optimized for function and user Installation • Wall-mounted or free-standing installation possible

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 47390 € 905.15 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 21 20 - 2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" Hodpfxjwiqz Ds Aiyenl 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm turning length 4.000 mm turning length 5.000 mm

Condition: new, functionality: fully functional, overall weight: 32 kg, input voltage: 230 V, Automatic internal lubrication – coolant is supplied directly to the core drill, increasing tool life and work quality STEPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined Hnodpfxjyt I Uuj Aiyol Morse taper MK4, enabling the installation of various tools such as twist drills, countersinks, reamers, tap holders, or hole saws Powerful high-torque motor with soft start and overload protection ensures reliable operation Strong electromagnet securely holds the machine in place during operation Ergonomic control panel enables quick and intuitive setting of work parameters Robust machine construction increases stability and minimizes vibrations during machining Wide range of applications – ideal for industrial, workshop, and service use Technical specifications: Drilling diameter (core bit): 100 mm Drilling depth (core bit): 100 mm Drilling diameter (twist drill): 38 mm Spindle stroke adjustment: 275 mm Maximum threading capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed settings – number of gears / stepless: 1. 50–110 / 2. 20–200 / 3. 200–500 / 4. 320–800 Spindle taper: MK4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. plate: 165 mm Magnet holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2,580 W Voltage: 230 V Dimensions – width: 330 mm Dimensions – depth: 430 mm Dimensions – height: 830 mm Weight approx.: 31.5 kg

Condition: new, functionality: fully functional, grinding length: 510 mm, grinding width: 250 mm, Reduced slip-stick effect thanks to plastic-coated x and y-axis guides. The longitudinal table guide is flat, while the transverse guide is triangular. Radial and axial forces are evenly distributed on special backlash-free bearings in the grinding spindle head. A separate hydraulic unit with heat exchanger prevents vibration and overheating. High stability thanks to ribbing and dimensioned wall thicknesses. Digital control of automatic vertical feed with servomotor. The hydraulic system ensures smooth table movement, even under heavy load. Rapid approach to workpiece height, automatic lifting after completion of the work cycle. Adjustable longitudinal and vertical table feed via end stops. PLC models are equipped with SIEMENS PLC controllers and touchscreens. Technical specifications: Table clamping surface width: 510 mm Table clamping surface depth: 250 mm T-slots (quantity/width): 1 / 14 mm Electromagnetic table size: 250 x 500 mm Longitudinal travel (x): 560 mm Transverse travel (y): 275 mm Max. spindle axis-to-table distance: 450 mm Max. table load: 180 kg Grinding wheel size: 200 x 20 x 31.75 mm Hydraulic table feed speed: 5 - 25 m/min Grinding spindle speed: 2850 rpm Hnjdoyt Hzmepfx Aiyjl Grinding spindle motor power: 2.2 kW Hydraulic pump motor power: 0.75 kW Vertical feed motor power: 0.5 kW Total motor power: 3.45 kW Voltage: 400 V Dimensions (W x D x H): 1900 x 2050 x 1840 mm Weight (approx.): 1750 kg Transverse feed (Y): Automatic transverse feed: 0.5 - 8 mm/stroke Rapid transverse feed: 990 mm/min Transverse feed per handwheel revolution: 4 mm/rev Graduation on handwheel (Y): 0.02 mm Vertical feed (Z): Automatic vertical feed: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke Rapid vertical feed: 480 mm/min Vertical feed per handwheel revolution: 2 mm Graduation on handwheel (Z): 0.005 mm

Condition: good (used), Year of construction: 1982, 1 used surface and guideway grinding machine Manufacturer: ELB Model: SWDE 30 U CNC Year of manufacture: 1982 / 1999 Control type: CNC Control: Mitsubishi 520 Location: NRW Country of origin: Germany Delivery time: short notice Delivery terms: ex stock TECHNICAL DATA Grinding length: 3000 mm Hsdeynglbspfx Aiyenl Grinding width: 900 mm Workpiece height: 600 mm Electromagnetic chuck: 3000 x 900 mm Pole pitch: 18 mm Grinding wheel dimensions: Ø 500 x 100 mm Control: Mitsubishi 520 Total power requirement: 18.5 / 5.5 kW Machine weight approx. 19 t Space requirement approx. 9 x 4.5 x 3.5 m Shipping dimensions approx. 13 x 2.5 x 3.5 m

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes - Renishaw measuring arm for tool measurement - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Hnedpfeymlhrsx Aiysl Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Hodpfx Aeyr Awboiyonl Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: as good as new (ex-display), Year of construction: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Dimensions and Weight: - Max. width/depth: 2300 mm - Approx. length: 2530 mm - Approx. width/depth: 1595 mm - Approx. height: 1795 mm - Approx. weight: 2600 kg Working Range: - Chuck diameter: 150 mm - Chuck clamping actuation: hydraulic - Centre height: 223 mm - Centre distance: 850 mm - Swing diameter over bed: 446 mm - Swing diameter over gap: 520 mm - Swing diameter over cross slide: 240 mm - Bed width: 300 mm Servo Torque: - X-axis: 6 Nm - Z-axis: 8.5 Nm Spindle Speed Range: - Number of speed ranges: 1 - Spindle speed range: 10 – 3000 rpm Electrical Data: - Drive motor power: 7 kW - Voltage: 400 V - Network frequency: 50 Hz - Total connected load: 23 kVA Accuracy: - Repeatability: ± 0.005 mm - Positioning accuracy: ± 0.005 mm Hnsdsymkwropfx Aiysl Hydraulic System: - Motor power: 0.75 kW - Tank capacity: 50 l Ball Screw: - X-axis diameter: 25 mm - X-axis lead P: 5 mm - X-axis accuracy grade: C3 - Z-axis diameter: 40 mm - Z-axis lead P: 5 mm - Z-axis accuracy grade: C3 Coolant System: - Coolant pump power: 270 W - Tank capacity: 90 l Machine Data: - Spindle bore diameter: 40 mm - Drive motor torque: 33 Nm Tailstock: - Taper: MT 4 - Quill travel: 165 mm - Quill diameter: 52 mm Spindle: - Spindle nose: DIN ISO 702-1 No. 5 - Spindle bore/bar capacity: 52 mm Controller: - Type: Sinumerik 828D PPU 240 - System software: SW 24 - CNC memory: 3 MB - Look Ahead: 50 - Block change time: 3 ms - Number of tools: 128 Travel: - X-axis: 250 mm - Z-axis: 760 mm Vertical Spindle: - Drive motor continuous power S1: 7 kW - Drive motor S6-30% duty cycle power: 16 kW - Drive motor torque: 33 Nm - Drive motor torque S6-30% duty cycle: 80 Nm Feed Rate: - X-axis: 15,000 mm/min - Z-axis: 15,000 mm/min Feed Force: - X-axis: 7.5 kN - Z-axis: 5.3 kN Tool Changer: - Type: hydraulic; VDI 30 - Number of tool stations: 8 - Max. square tool shank height/width: 20 x 20 mm - Max. boring bar diameter: 25 mm Features: - Siemens spindle and servo motors - Full enclosure with safety interlock - Standard with max. spindle speed up to 3000 rpm - Automatic central lubrication - Swiveling control panel - Tailstock cover - Electronic hand wheels for X and Z axes - Coolant system with 90-liter tank - RJ45 connection, USB port, and 230 V power socket - EMC (Electromagnetic compatibility) - Six leveling feet - Operator tools included SINUMERIK 828D Basic – COMPLETE PACKAGE - Safety Integrated - Remainder material detection and machining - ShopTurn step programming - Network drive management - 3D simulation - Graphical tracking Control: - 10.4” color display - 4:3 format - User-friendly SINUMERIK Operate software - Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card Guides: - Rigid flat-bed guideways Ball Screw: - For high rapid traverse speeds on all axes - Reduced wear - High positioning and repeat accuracy

Condition: excellent (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 110-00310, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 2,500 mm, feed length Y-axis: 800 mm, pneumatic connection: 6 bar, compressed air connection: 6 bar, The KSL110-Headbag CNC Rotary Head Sewing System is in excellent condition and has logged approximately 2,000 operating hours. Fields of Application: Demanding safety, functional, and decorative seams. Features: - Sewing machine driven on the X axis, template driven on the Y axis - 360° rotary head with alternating double feed for perfect seam results in multi-directional sewing processes - Intermittent feed (feed stops when the needle pierces the material) - Switchable needle feed (on/off) for continuous sewing with maximum seam quality - Sewing head can be pneumatically lifted (75 mm) for direct access to any seam position - Two 26 mm bobbins and hooks - Excellent sewing properties thanks to the vertical hook system - Top thread tension is electrically/pneumatically adjustable via menu with Eltex unit - Broken thread monitoring - Bobbin thread monitoring via stitch counter - Electromagnetic thread trimmer for upper and lower thread - Mobile electric bobbin winder (freely positionable) - The touchscreen control panel provides intuitive operation and stands out with its modern, clear layout. Seam progress can be monitored in real time on the screen. Special Features: - Automatic detection of the workpiece holder/sewing program via hand scanner and barcode ensures additional process safety - Sewing area is protected by light barriers (CE compliant) - Pneumatic presser foot height adjustment - Clamping device for fixing two sewing templates in the working area Technical Data for the KSL110-Headbag CNC Rotary Head Sewing System: - Length and width: 3,495 mm x 4,276 mm - Height: 1,685 mm - Weight: 2,000 kg - Max. sewing area: 2,500 mm x 800 mm - Stitch type: 2-needle/double lockstitch - Max. material thickness: 10 mm Hodpfoyxnl Ssx Aiyenl - Max. sewing speed: 2,800 stitches per minute - Max. stitch length: 12 mm - Operating voltage: 3P+N+PE / 400 VAC / 50–60 Hz - Power consumption: 16 A / 5 kW - Operating pressure (min. – max.): 6 bar - Year of manufacture: 05/2017 - Operating hours: approx. 2,000 h - Control unit: Touchscreen monitor with computer (Windows) The CNC Rotary Head Sewing System KSL110-Headbag is a powerful industrial sewing system designed for demanding safety, functional, and decorative stitches. Manufactured in 2017, this model is characterized by its robust construction. The machine is housed in a grey and white aluminum cabinet that appears clean and well-maintained, indicating careful use. This advanced CNC sewing system offers a sewing area of 2,500 mm x 800 mm and operates with a 2-needle double lockstitch system. It supports a maximum sewing speed of 2,800 stitches per minute and a maximum stitch length of 12 mm. The sewing head is pneumatically liftable by 75 mm, allowing direct access to any seam position, and features a 360° rotating head with alternating double feed, ensuring perfect seam results in multi-directional sewing processes. It is particularly suitable for demanding and industrial sewing applications that require high precision and reliability.