Used Emf Dordt 226U 7,5/4 for sale (58,578)

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 Gedpfohhyizjx Anzebn diameter 3,25 mm length 350 mm 120 pieces in package 2 packages available 95 Euro per package

Condition: used, functionality: fully functional, machine/vehicle number: UFS/200DTFVRE480 / UFS 1078, Year of construction: 1999, operating hours: 1,900 h, load capacity: 2,000 kg, lifting height: 4,800 mm, fuel type: electric, battery weight: 1,000 kg, Equipment: pallet forks, Due to business closure, being sold for immediate sale. The electric forklift is in good condition and was used exclusively indoors on smooth concrete floors. The tires are in good condition. The overall condition is acceptable. Total weight (without battery) is 3.25 tons, the battery weighs approximately 1.0 ton. Charger included. Gbedpfx Aeza A Ehjnzsn No transport included.

Condition: new, empty load weight: 5,940 kg, maximum load weight: 30,060 kg, overall weight: 36,000 kg, next inspection (TÜV): 06/2027, loading space length: 9,250 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 47 m³, suspension: air, tire size: 385/65 R 22.5, color: other, gearing type: other, front tire size: 385/65 R 22.5, driver cabin: other, emission class: none, 47.4 cbm * 4 hook locks * Aluminum rims * Access ladder * Operator platform * Aluminum compressed air tank * Individual wheel fenders * Grain hopper * Rubber seal * Combination tipping cylinder * Grain slide Gbsdeza U Syopfx Anzen * Kingpin 2'' * Single lift axle * Hopper without discharge chute * Roller tarp * SAF axles * Disc brake * Smart Board * Telescoping supports * Foldable underrun protection We expressly reserve the right to sell the item in the meantime, as we also offer it on other platforms. Accessories are listed without guarantee, subject to changes, prior sale, or errors. We strongly recommend and offer a viewing and inspection so that the buyer does not form any false impressions about the condition and suitability. Viewings and inspections are possible and expressly desired at any time by appointment. We will take care of all formalities and hand over the vehicle with the desired transport license plates for an additional fee. The images have been partially edited and are only for initial viewing; if you are interested, please contact us and request current images.

Condition: new, empty load weight: 5,920 kg, maximum load weight: 30,080 kg, overall weight: 36,000 kg, next inspection (TÜV): 06/2027, loading space length: 9,250 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 47 m³, suspension: air, tire size: 385/65 R 22.5, color: other, gearing type: other, front tire size: 385/65 R 22.5, driver cabin: other, emission class: none, 47.4 cbm * 4 hook locks * Aluminum rims * Access ladder * Control panel * Aluminum compressed air tank * Individual wheel mudguards * Grain hopper * Rubber seal * Combination tipping cylinder * Grain slide * King pin 2'' * Single lift axle Gbsdpfxjza U Smo Anzen * Hopper without discharge chute * Roller cover * SAF axles * Disc brake * Smart Board * Telescopic supports * Foldable underrun protection We explicitly reserve the right to sell the item in the meantime, as we also offer it on other platforms. Accessory information is provided without guarantee; subject to changes, prior sale, and errors. We strongly recommend and offer a viewing and inspection so that no false impressions arise regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly desired. We will handle all formalities and hand over the vehicle with the desired transport license plates for an additional fee. The images have been partially edited and serve only as an initial visual aid; if you are interested, please contact us and request current images.

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Gsdpozaa Uaefx Anzjbn Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar.

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm Godpfx Aeq Ulucjnzobn With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: good (used), 4-station bookbinding press for gluing blocks Gbodpfxjy Ehnao Anzjn MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: Godpfx Aoy Ehk Ionzsbn 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: used, REF: MM6436 Chinese 4-head filler with gating system and touch-screen controls. Valves capable of hot filling. Godpfx Aoza T I Hsnzjbn Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Will need guarding to meet CE spec.

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A, (with gas duct) - Output: 100-1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/2-A Design: ZM-LN Output: 75-630 kW Year of manufacture: 2021 4. Gbjdpfx Answgyrtozon WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 125-900 kW - Design: ZM-LN - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 6. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2009

Condition: new, Year of construction: 2023, grinding wheel size 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M4,5 EW17,5° 4GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Gbjdjul Eraepfx Anzsn Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, Year of construction: 2023, grinding wheel size 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M4,5 EW17,5° 5GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance Gbodpfx Anoul Eplozjn - Significantly higher sanding parameters than with standard tools

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Godpfxey Rp D Ts Anzsbn Technical data: - Cutting length: 2800 mm - Cutting width: 1300 mm - Cutting height: 155 mm - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW - Year of construction: 2025 Duplex mitre fence

Condition: good (used), 4 x Bonfiglioli wind turbine gearbox JB00001227 SN B6201603697 Gedpfx Anjwg E Utozobn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,000 kg, load capacity per storage section: 3,000 kg, total length: 34,000 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, pallet spaces: 144 euro pallets, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 34,000 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M45112711-2) each 8.5 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load capacity 3,000 kg. - 16 frames (RM4511 - RAL5019) - 32 footplates, shims, mounting hardware - 64 floor anchors (ZZBA1210) - 72 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Gjdpfxey R R R Ie Anzsbn Freight / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction site/assembly location - Unloading from truck to be carried out by the buyer with their own lifting equipment. - Deliveries possible throughout the entire territory of the Federal Republic of Germany; except islands! Deliveries to EU countries are possible by separate arrangement.

Condition: used, Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of axes: 4, number of slots in tool magazine: 16, Equipment: CE marking, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is perfectly suited for precise processing of wood, MDF, plastics, and sheet materials. The FORMAT-4 H10 stands out for its high traverse speeds and robust construction. Particularly noteworthy are the powerful 10 kW HSK-F63 milling spindle, the 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Type: CNC machining center Working Area * X axis: 3,120 mm * Y axis: 2,160 mm * Z axis: 105 mm Traverse Paths Gedpfsy Smi Ajx Anzjbn * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Milling Spindle * 10 kW HSK-F63 milling spindle * Speed range: 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool slots on the machine frame and mounted laterally Additional Units * C-axis 0–360° Vacuum/Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two rows of stops Control/Software * FORMAT-4 H10 control system * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile operator console * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for drilling head * Operator tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection by appointment possible.

Condition: used, mileage: 36,446 km, power: 129 kW (175.39 HP), first registration: 11/1993, overall weight: 9,500 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 1,650 mm, total width: 2,500 mm, total height: 2,750 mm, Equipment: ABS, all wheel drive, compressor, parking heater, Clean MB 917 box truck 4x4 from the THW with long axle ratio Vmax = 97 km/h, the 917 accelerates briskly, shifts smoothly, and steers precisely. Equipped with ABS, auxiliary heater, large double cab with 9 seats. The driver’s seat is air-suspended. Godpfx Ansy Ritbjzebn (For truck registration reduced to 6 seats) all seats with automatic seatbelts and headrests. Gross vehicle weight rating (GVWR) reduced to 7.5 t, unladen weight approx. 6.0 t +++ with fresh TÜV inspection and historic vehicle certificate. Inspection carried out including checking all fluid levels, Clutch fluid and air dryer cartridge replaced. Chassis lubricated, both starter batteries replaced (NATO block batteries). Box body dimensions, external: 3000 x 2470 x 1650 mm (LxWxH) Wheelbase 3650 mm This 917 is very well maintained and ready for immediate use. Engine, transmission, and axles are dry. The body, cab, including door edges, are free from corrosion and are virtually rust-free. Towing capacity is 7.5 t, with GVWR 9.5 t = 11.5 t with full air brake system. With overrun brake 3.5 t, unbraked 1.5 t (military trailer). +++ Errors, modifications, and prior sale reserved.

Condition: used, mileage: 16,225 km, power: 129 kW (175.39 HP), first registration: 09/1993, overall weight: 9,500 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 1,650 mm, total width: 2,500 mm, total height: 2,850 mm, Equipment: ABS, all wheel drive, compressor, parking heater, Clean MB 917 box truck 4x4 from the THW with long axle ratio Gbodpfxey Rithj Anzjn Vmax = 97 km/h, the 917 accelerates briskly, shifts smoothly, and steers precisely. Equipped with ABS, auxiliary heater, large double cab with 9 seats. The driver’s seat is air-suspended. (For truck registration reduced to 6 seats) all seats with automatic seatbelts and headrests. Gross vehicle weight rating (GVWR) reduced to 7.5 t, unladen weight approx. 6.0 t +++ with fresh TÜV inspection and historic vehicle certificate. Inspection carried out including checking all fluid levels, Clutch fluid and air dryer cartridge replaced. Chassis lubricated, both starter batteries replaced (NATO block batteries). Box body dimensions, external: 3000 x 2470 x 1650 mm (LxWxH) Wheelbase 3650 mm This 917 is very well maintained and ready for immediate use. Engine, transmission, and axles are dry. The body, cab, including door edges, are free from corrosion and are virtually rust-free. Towing capacity is 7.5 t, with GVWR 9.5 t = 11.5 t with full air brake system. With overrun brake 3.5 t, unbraked 1.5 t (military trailer). +++ Errors, modifications, and prior sale reserved.

Condition: used, mileage: 45,473 km, power: 125 kW (169.95 HP), first registration: 10/1997, overall weight: 9,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,000 mm, total width: 2,500 mm, total height: 3,130 mm, Equipment: ABS, all wheel drive, MB 917 AF as LF 16TS with front-mounted pump 16/8, possible downrating to 7.5t GVW, in decent condition with selectable 4x4 all-wheel-drive, power steering, centre and rear differential locks, 9Rx22.5 tyres, trailer hitch with max. towing capacity – braked 3,500 kg – unbraked 1,500 kg, Vmax according to paperwork = 92 km/h, wheelbase = 3,640 mm. Truck runs well, assemblies are dry, rust-free chassis. Box internal dimensions LxWxH in mm: 3,060 x 2,360 x 1,450. Rear cabin behind driver LxWxH in mm: 1,740 x 2,150 x 1,470. – Subject to change, prior sale and errors – Gsdey Ngv Rjpfx Anzobn

Condition: used, mileage: 48,670 km, power: 121 kW (164.51 HP), first registration: 04/1995, overall weight: 9,600 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,000 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, MB 917 AF as LF 16TS with front-mounted pump 16/8, downrating to 7.5t GVW possible. Good condition with selectable all-wheel drive 4x4, hot water auxiliary heater with blower, power steering, differential locks center + rear, tires 10Rx22.5, towing hitch (braked trailer load: 3500kg, unbraked: 1500kg), Gbjdpey Ngwbofx Anzen Vmax according to papers = 97 km/h, wheelbase = 3640mm. +++ Front-mounted pump is defective – 1 outlet is broken, see photo +++ Truck runs well, equipment is dry, rust-free chassis. Auxiliary heater is functional, Hankook tires as new (DOT 2021). Includes recent inspection with new fuel filters and lubrication. Box body dimensions (internal, LxWxH in mm): 3060 x 2360 x 1450 Rear cab dimensions behind driver’s seat (LxWxH in mm): 1740 x 2150 x 1470 Net price: €14,958 + 19% VAT €2,842.00 = €17,800 gross - Subject to change, prior sale and errors excepted -

Condition: refurbished (used), Year of construction: 2019, operating hours: 12,595 h, load capacity: 2,950 kg, lifting height: 7,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,287 mm, fork length: 1,200 mm, empty load weight: 4,261 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION. Our forklifts are technically overhauled in accordance with FEM-4.004 and current safety standards – for maximum quality and your safety. From chassis to battery, including drive, brakes, steering, and electrics – every machine undergoes thorough inspection and reconditioning. ✔ Made in Germany – with accountability and precision ✔ Strict technical inspection ✔ 400+ vehicles available Gedpey Rnz Djfx Anzjbn ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and receive expert advice on-site – we will find the right solution for you. Industrial Truck Specifications: Manufacturer: Jungheinrich Model: Front Forklift EFG S30 Drive type: Electric Rated capacity: 2,950 kg Year of manufacture: 2019 Operating hours: 12,595 Lift height: 7,500 mm Mast type: Triplex Full free lift: Yes Overall height: 3,287 mm Fork length: 1,200 mm Unladen weight: 4,261 kg Load center: 600 mm Tyres: Solid rubber Model type: EFG S30 Battery type: PzS Battery weight: 1,863 kg Cabin type: Full cabin – front, roof & rear window + steel doors (suspended) Cabin equipment: Solopilot control unit Lighting: Rotating beacon Lighting: Rear bluespot – safety light Attachment: Side shifter Attachment: Additional hydraulic circuit – routed to fork carriage

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Gbjdpfx Ansfdkb Tszsn According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Gbedpfod Tbbdex Anzsn - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Gsdpfsd Tqaljx Anzsbn - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Gbsdjfdkb Ujpfx Anzsn - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.