Used Enercon Rotating Device for sale (18,109)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Fgodpozyy Rmjfx Aptjg Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: good (used), container turning device, boiler turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning device Fgedjvt Rcdopfx Aptsg -Container turning device: welding turning device -Load capacity: 5000 kg -Drive motor: SEW Eurodrive 0.37 kW -Unrolling speed: 100 to 600 mm/min right/left rotation -Roller spacing: 270 - 960 mm, rollers Ø 230 x 159 mm -Transport dimensions: 1200/740/H745 mm / 870/430/H745 mm -Weight: 378 kg / 275 kg

Condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system, roller block turning device -Roller block: container turning device, without drive Fodpfxsu Tlg Sj Aptogg -Roll spacing: 290 to 1205 mm -Rollers: 4 pieces on both sides Ø 230 mm, total width 282 mm -Load capacity: kg -Dimensions: 940/640/H835 mm -Weight: 445 kg

Condition: excellent (used), functionality: fully functional, GERNAL 2000L | Tilting brewing kettle with hydraulic tilting (Process kettle with heating jacket) Manufacturer: GERNAL Model / Type: Tilting brewing kettle Fgsdpfx Apsy Umuwjtog Working capacity: 2000 liters Internal tank dimensions: Ø 1700 x 1400 mm Overall dimensions: 2300 x 2500 x 2600 mm Heating system: Double jacket Tilting system: Hydraulic Equipment: - Control cabinet - Pallet with accessories This gigantic, industrial brewing kettle with a capacity of up to 2000 liters is an advanced process device designed for food processing plants operating on a large scale. This type of kettle is a key piece of equipment in large meat processing plants, ready-meal factories, fruit and vegetable processing plants, large central kitchens, airline catering facilities, and in the sauce, soup, and culinary base production industry. The tank construction is based on double-jacket heating technology, which prevents direct contact between the raw material and the heating element. This guarantees perfectly even temperature distribution over the entire surface of the large tank (Ø1700 mm) and completely eliminates the risk of burning thick product batches. The most important advantage of the machine is the automatic, hydraulic tilting system of the working chamber. Advanced actuators, powered by an external hydraulic pump, smoothly and effortlessly rotate the kettle, allowing for rapid discharge of the cooked product directly into waiting butcher carts or onto a subsequent transport and dispensing line.

Condition: used, Year of construction: 1983, Working width 1350 mm Number of sanding units x st. Second-hand machine Fgedpfxozk Npmj Aptog Year of manufacture: 1983 Condition: fully inspected and serviced, Includes new feed belt Features and technical specifications: - Includes combination unit with contact roller and sanding shoe - with height-adjustable contact roller for calibration - with an air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - with pneumatic belt tensioning device - fitted with a rotating cleaning brush on the outlet side of the machine - Belt oscillation controlled by a photoelectric sensor for automatic monitoring and control of the lateral belt position to ensure even belt wear - with roller table at the inlet - with digital display for the electrically driven workpiece thickness adjustment - with additional veneer sanding beam - Includes 2 spare grinding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Clearance height: 150 mm - Main motor: 15 kW - Feed speed continuously adjustable from 2.5 to 12.5 m/min - Extraction connections: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2,300 kg Availability: at short notice Storage location: 63934 Röllbach

Year of construction: 2016, condition: used, Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: longitudinal to transverse. This device is commonly used in the wood and furniture industries to facilitate the movement of panels during processing. If you have any further questions or require further details, please don't hesitate to ask! TECHNICAL DETAILS TO BE VERIFIED Fjdpfew Db Epjx Aptegg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, Optical 3D coordinate measuring machine, manufacturer Keyence Model series VL 550 / VL 570 with few operating hours. - Basic device VL-550 - Measuring head VL-570 - Control unit VL-500 Fgedpfx Aer Epxpepteg Some technical data on the measuring device: Display resolution: 0.1µm Repeatability: 2µm Measuring accuracy: ± 10µm in accordance with VDI/VDE 2634 Bl.3 Standard measuring mode: 4 million measuring points Fine measuring mode: 16 million measuring points Motorized rotary table: XY and 360° rotation Scope of delivery: - 500mm base VL-550 - Measuring head VL-570 - Control unit VL-500 - cover - Calibration plate - User manuals - Certificates from the manufacturer - Shape and position tolerance module (software CD) - Comparison measurement module (software CD) - Alternating current cable Further technical data is available on request.

Condition: ready for operation (used), Column drill press GILLARDON GB 25 -Drilling capacity / steel 32 mm -Drilling capacity / cast iron 35 mm -Speed range - stepless 60 - 1800 rpm -Direction of rotation / right - left -Morse taper MK 3 -Overhang 290 mm -Quill travel 175 mm -Table area 450x360 mm -Table height adjustment by means of hand crank -Threading device -Coolant system -Drill chuck -Analog speed display -Foot switch -Emergency stop -Documentation Fsdpfxszdb H So Aptjgg Dimensions: L x W x H 0.7 x 0.7 x 2 meters / Weight: 490 kg Errors and omissions excepted.

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Fgedpfxjykr Aqo Aptjg Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Fjdpfezq Ab Nsx Aptegg Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Fgjdpfx Aswc A Rdjptog

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops Fedpfx Apjzuw H Istjgg - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. Fgodotu Hpqspfx Aptsg We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Fjdpfx Apozyz Erstsgg Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) Fedpfx Apjzf E Hqstogg The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2013, Vehicle No. G0113245_1 – Manufacturer: Krone. Fedpfxjzx Nd Ho Aptegg * Inserted slat (wood) * Contour marking, side/rear * Load certificate, Code-XL * Multi-hole strip * Portal door with double rotating bar locks (exterior) * Side sliding tarpaulin * Forklift accessible * Fixed support legs * Device for rail loading * Lashing recesses * Lashing options * Perforated pallet stop strip Financing available upon request. Delivery time: IMMEDIATELY. Multi-Lock exterior frame. New tarpaulin. Newly painted. Technically ready for operation, body and support legs newly painted. Door seals NEW! Undercarriage (KTL) cleaned and treated with underbody protection. Valid UVV inspection. UVV documents available. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request, please call or email.

Condition: used, Year of construction: 2023, New demonstration machine! List price: €93,317 net. Basic machine complete in standard configuration for drilling and grooving: Detailed technical data can be found in the data sheet for ProTec Type 0571. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4-axis drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Milling unit Profit HSK63F with 3-position magazine for automatic tool changing, motor 5.5 kW (S1), 1000-20000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connection power 12 kVA, rated current 17.5 A, fuse 32 A, voltage 400 V, 50 Hz, 3 phases (without transformer). Power supply system TN or TT. Pneumatics connection 7 bar (102 psi). On the machine: coupling connector (quick coupling) ¼, DN7.2, brass, factory side. To the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, hose inner diameter 12 mm (min.). Compressed air requirement: continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection: 3x extraction nozzle dia. 80 mm. Extraction speed 30 m/sec - measured at the extraction nozzle. Extraction requirement: min. approx. 2500 m3/h min. Machine weight approx. 1650 kg (with options!). Machine installation location: In principle, a ProTec can be fixed to the floor with screws. A concrete floor (or foundation) is assumed (at least at the 4 machine edges/machine feet). Equipment: ProTec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for the front of the machine, width 500 mm. Roller table 765 mm (Y-axis), foldable, for the back of the machine, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device via slat curtain. Requirement for horizontal milling for Lamello P-system (without tools for Lamello P-system). Drill set for ProTec shaft ø 10 mm with clamping surface (JSO): 1 HW roofing drill 5x70mm (cutting depth 35mm), LH # 30566-5-05035-L3. 1 HW dowel drill 5x70mm (cutting depth 35mm), RH #30540-5-05035-R4. 1 HW dowel drill 5x70mm (cutting depth 35mm), LH #30540-5-05035-L3. 1 HW dowel drill 8x70mm (cutting depth 35mm), RH #30540-5-08035-R. 1 HW dowel drill 8x70mm (cutting depth 35mm), LH #30540-5-08035-L2. 1 HW dowel drill 10x70mm (cutting depth 35mm), LH #30540-5-10035-L1. 1 HW countersink drill 15x70mm (cutting depth 35mm), LH #30300-5-15070-L1. 1 HW countersink drill 20x70mm (cutting depth 35mm), RH #30300-5-20070-R1. 1 HW countersink drill 35x70mm (cutting depth 35mm), RH #30300-5-35070-R. 1 HW grooving cutter ø 125/30 mm, grooving cutter width (SB) 4.0 mm, Z=12, LH, Leitz. Only for chipboard and MDF, solid wood on request and by agreement. Tool holder HSK63 F, 3.0 pcs. For collet 462E/OZ25. Collet 462E/OZ25 for shank 25 mm, 3.0 pcs. Carbide shaft cutter Z1+1, 1.0 pcs. with WP drill cutter ø20, S25, LH 120, L2/L3 58 mm. Grooving cutter HW indexable insert Fgjdpfjw Tfzfox Aptog

Year of construction: 2016, condition: used, Panel rotation device used in production lines. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: longitudinal to transverse. This device is commonly used in the wood and furniture industries to facilitate the movement of panels during processing. Fsdpfx Apsw Da Shstsgg

Condition: good (used), Kama Pro Fold 74 Folder Gluer The machine is in very good condition, recently inspected, regularly serviced, and maintained. The KamaProFold 74 is a multifunctional, modular folder-gluer. It is used for automatic folding, gluing, and applying additives. Designed by the German manufacturer KAMA GmbH, the machine allows for the quick and profitable production of small and personalized print runs. The device eliminates time-consuming manual labor in commercial and packaging printing houses. It handles a wide range of products: – Advertising materials: presentation folders, folded cards, ticket envelopes, calendars. – Packaging: boxes, linear boxes, CD/DVD covers. Fedpfxjzw Tzto Aptsgg – Postal accessories: shipping envelopes, courier bags, zigzag folds. The machine was manufactured in 2013. Controlled by two touchscreen panels. HHS XMelt 3-nozzle glue system, manufactured in 2021. Kraus JoKer Servo inserter Double-sided tape feeder Creasing module Two folding cassettes 90° rotation device Maximum sheet width: 740 mm Maximum speed: 150 m/min Weight: 100-600 gsm Power: 4.5 kW Power supply: 380 V Weight: 2500 kg Paper set, cabinet for small parts, spare parts, glue, and tape.

Condition: excellent (used), Year of construction: 2021, Semi & fully automatic pallet wrapping machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating mode: Semi-automatic & fully automatic Year of manufacture: 2021/2022 Functions and specifications of the LP-SWA-SERIES Production speed: Up to 35 loads per hour. Load capacity: Maximum load weight: 4,500 lbs dynamic - 10,000 lbs static Maximum load size to safely pass the tower: 67“ x 67” (96“ load diagonal) x 80” H Maximum load size to stay inside the turntable: 46“ W x 46” L (65“ load diagonal) x 80” H Low profile turntable: 65” diameter, laser-cut steel top with all-around deck protection. Maintenance free 54-roller bearing support system. Turntable height 2.813 inches from floor. ANSI No. 50 direct chain drive with chain tensioner. Speed between 3 and 12 rpm with smooth start acceleration Film carriage elevator: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Fedpfx Apswb A N Rotsgg Automation functions: Fully electric - no pneumatics required Cousins Smart Engineering has developed the A-Arm, an advanced cutting and holding device. It offers significant productivity gains and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting stretch film offers you the following benefits: - Selectable banding function at the top - Stabilizes the load early in the wrapping cycle - Places the film end at the top of the load instead of the bottom - There is no film clamp on the turntable that can be damaged by dirt or operator error - and Also, no slip rings are required to power the turntable, reducing maintenance requirements - Load placement on the turntable is not critical - No air connections or noisy compressors - New automatic load detection safety feature on first rotation detects unevenly or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions - A-arm fall protection Control functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) Power off - power on - reset switch and operation indicator Automatic wrapping cycle start/pause with just one button Cycle pause for applying the cover sheets Reinforce the wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Film tension control (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height detection sensor for dark or shiny loads Separate control for 1 to 12 turns top and bottom wrapping Selectable parameters for reduced film tension to wrap the top and/or bottom of the load Non-proprietary UL/CSA approved components A - B - C wrapping program selector with the option of entering and saving individual wrapping parameters for each program Product video 1 Product video 2 Product video 3 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1969, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device Welding Rotating Device Type W05 -Drive motor: -Load capacity: 9500 kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 395 mm Fjdszd Rd Sepfx Aptjgg -Rolling speed: 0.2 to 1.45 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 2770/1120/H560 mm / 2350/990/H560 mm -Weight: 2510 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: SLM06EC01-R1, workpiece weight (max.): 5,000 kg, EMC Model 1350 HHH Giant Brush Sanding Machine - Never Used Premium high volume sanding machine made in Italy. Installed and tested, but was never implemented into production. Working width: 1.35m Working thickness: 3mm to 150mm CE and CSA Standards Line machine: 900mm from floor. 3 sanding brush groups 3 zones x 11 brush heads = 33 brush heads 200mm Disc diameter 3 x 15hp gear driven motors independently housed inside the machine's basement. Welded monocoque type frame, made in heavy duty carbon steel construction for production setting. Inverter controlled oscillation 70 to 140mm Inverter controlled rotation speed 280 to 1100 rpm Inverter controlled feed belt for variable feed speeds 0.5 to 8 m/min Adjustable vertical pressure stroke 50mm Each zone of brushes have discs on 2 staggered rows (6 and 5) Automatic feed belt centering device. Soundproof protection on all doors. Premium components - ball screws, rubber parts, electronics, pneumatics, etc. Quick tool changer locking device for all 33 spindles Vacuum holding system (5.5hp) under machine with short pipes and no curves. Turbo blowers for piece and feed belt cleaning. Programmable and active by the working piece. Extra sanding brushes: two full sets of wire stock removal brushes for rustic finishing, one set of sanding heads for finish sanding, and one set of Tynex brushes for contoured / raised sanding. All controlled and programmed by touch screen - fully computerized machine with customizable programs. Fodpfxswrrchs Aptsgg 575v, 3ph (RT Can Help Source a Transformer for US-Voltage if Need Be

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² 1) Extruder Designed for double degassing Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Number of heating zones on the barrel: 5 Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices Fodjzhm Ihopfx Aptjgg The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Condition: used, Year of construction: 1990, Used Overhauled Rinsing Machine The Used Overhauled Rinsing Machine Virmauri rinsing machine, built in 1990 and overhauled, is an industrial machine dedicated to the treatment of glass containers. With an operating capacity of 7000 bottles per hour (BPH), the device implements a system of 28 grippers for the optimization of rinsing processes. Operating clockwise, this unit features movable nozzles, allowing flexibility in specific treatment for each container. Mechanics and Operation Focusing on mechanics, the device adopts a single-step treatment approach, using water as the main cleaning agent. This choice, while simplifying the process, imposes stringent requirements on the quality of the water used and on the maintenance of the nozzles to prevent cross-contamination. The clockwise rotation direction and the arrangement of the sockets have been designed to optimize the workflow and minimize downtime during production batch changes. These technical aspects require careful evaluation when integrating the machine into existing production lines. Current Status and Maintenance of Used Overhauled Rinsing Machine Regarding the current status of Virmauri, the used overhouled rinsing machine is classified “On stock”, indicating immediate availability for installation and use post-overhaul. The Used Overhauled Rinsing Machine has undergone an overhaul process to ensure its functionality and reliability over time. Maintenance management requires a meticulous approach to ensure the availability of spare parts and the technical competence for rapid interventions. Conclusions of Virmauri rinser equipment: In conclusion, the 1990 Virmauri rinser, with 28 grippers and a capacity of 7000 BPH, represents a technologically viable option for companies in the bottling industry that need an efficient and reliable unit for processing glass containers. The decision to acquire a machine of this nature requires a detailed analysis of your production needs, compatibility with existing lines and internal maintenance capabilities, to ensure optimal integration and operation. Fodpfjvgvwajx Aptjgg We can assure full service on this Virmauri equipment with our staff.

Year of construction: 2003, condition: good (used), functionality: fully functional, number of axes: 5, DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Fgsdpfx Apezwhunotsg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Volume flow for tool clamping: 6.6 l/min Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.