Used Fgl Fgl-Sw50-10/V3D for sale (30,091)

Condition: used, mileage: 3,34,520 km, first registration: 01/1986, fuel type: gasoline, axle configuration: 2 axles, color: white, gearing type: mechanical, Year of construction: 1986, LICENSE PLATE: PD9815306 TITLE: FIAT 60 10 USED SPECIAL PURPOSE VEHICLE FOR MOBILE SHOP (CATEGORY C LICENSE) REF. 25C40 YEAR: 1986 HORSEPOWER: 100 ENGINE DISPLACEMENT: 4570 cc EMISSIONS: Euro 0 KILOMETRES: 334,520 TRANSMISSION: Manual TOTAL VAN LENGTH: 6.00 m TOTAL VAN WIDTH: 2.10 m TOTAL VAN HEIGHT: 3.00 m INTERNAL VAN LENGTH: 4.10 m INTERNAL VAN WIDTH: 1.82 m INTERNAL VAN HEIGHT: 1.90 m COUNTRY OF ORIGIN / ABROAD: Italian AXLES: 2 WHEELBASE: 3000 mm SEATS: 3 PAYLOAD: ACCESSORIES: - Roof luggage rack with manual awning (to be replaced) REFURBISHED: No LAST INSPECTION: 21/05/2024 TYRE CONDITION: 50% Gjdpfxsxya I Sj Akajug Subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales department for updated pricing and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA DEMOUNTABLES operates in the field of sales and procurement of industrial and commercial vehicles, with a focus on the waste management sector. We specialize in trucks, trailers, and demountable equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 bins, containers—with or without demountable cranes. E.&O.E. Due to the large number of listings and details provided, Aurora recommends verifying the accuracy of the information with our sales staff.

Condition: good (used), functionality: fully functional, DALEX PMS 10-4 powerful and robust industrial spot welding machine, supplied as a ready-to-use set with a matching COHLINE water cooling unit. Highlights & Condition Extremely low operating hours: The installed digital DALEX MPS 100 controller shows an original counter reading of only 13,282 cycles. For an industrial machine of this class, this indicates exceptionally low use and minimal wear. High electrode force: This model provides a powerful electrode force of up to 690 daN, enabling reliable welding points even on thicker sheet metal. Cooling unit included: Thanks to the powerful COHLINE cooling unit with 5.8 kW cooling capacity, the machine is suitable for continuous industrial operation without overheating. Flexibility & Safety: Equipped with a key switch for easy selection between operation via foot switch or two-hand safety control panel. Technical Data at a Glance DALEX PMS 10-4 Spot Welding Machine Guodpfx Akjzz H Eyjajg Maximum welding power: 294 kVA Rated power (50% duty cycle): 80 kVA Maximum short-circuit current: 51.7 kA Supply voltage: 400 V / 50 Hz No-load voltage: 3.5 to 7 V Electrode force: 115 to 690 daN Controller: DALEX MPS 100 with digital display Machine weight: approx. 465 kg COHLINE WRK 245-53 Cooling Unit – Year 2000 Rated cooling capacity: 5.8 kW at 32°C ambient / 15°C water temperature Refrigerant: R407C, 4.0 kg Supply voltage: 400 V / 50 Hz Fuse protection / Current consumption: 16 A / 9.0 A Operating cycles: 13,282 cycles Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Gusdpozuyxgjfx Akaog Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: used, offer consists of: Horizon PK-10 klicker for almost all horizon machines Guedpfx Aksu Tdm Rsasg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, Year of construction: 2026, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Godpfsr Eli Tsx Akaeug Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Sepro Success 7 Number of axis: 3 Reach: 1000 mm Payload: 3 kg X=1000 mm Y=400 mm Z=800 mm Gedpex Ec E Rsfx Akaeug C= R1 pneu Euromap 67 yes Pressure circuit : 1 Robot is immediately available Available list of Robots: SUCCESS 7| R001321-03| 2016 ---|---|--- SUCCESS 7| P22212| 2014 SUCCESS 7| P24358| 2015 SUCCESS 7| P19869| 2013 SUCCESS 7| R001321-04| 2016 SUCCESS 7| R004687-01| 2017 SUCCESS 7| P22213| 2014 SUCCESS 7| R001321-02| 2016 SUCCESS 7| P24357| 2015 SUCCESS 7| P22214| 2014

Condition: used, Technical specifications: Max. planing width: 240 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle arrangement: bottom: 5.5 kW right/left: 7.5 kW top: 5.5 kW top: 5.5 kW bottom: 5.5 kW universal: 5.5 kW Spindles 1/4/5/6 are on separate motors Spindles 2/3 are on one motor Grooved tables Grooved rollers in the table: 2 Top steel feed rollers: 5 Top rubber feed rollers: 3 Dust extraction port diameter: 6 x 140 mm Infinitely variable feed rate adjustment Feed via cardan shafts Table lubrication pump 2 smooth rollers in the table Pressure: 6 atm. Electric lifting of the machine body Power supply: 400 V Total power: 46 kW Gjdpfeycu R Iox Akajug Overall dimensions: Length: 4600 mm Width: 2000 mm Height: 1800 mm

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FL-10-80 Constr. year: 1985 diameter range: 10 mm Gsdpfx Ajxnyrtokasug shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels Gujdpfx Akov Df T Eoasg -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Tire size: 23x9-10 (225/75-10) RIM 6.50 F-10 -Bolt circle: Ø 160 x 20 mm -Recess: Ø 110 mm -Price/Fee: complete -Dimensions each: Ø 550 x 215 mm -Weight: 58 kg/piece

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Gusdpfoyw Tm Eox Akajg Prior sale is reserved.

Condition: used, Year of construction: 2019, operating hours: 200 h, machine/vehicle number: 2782, overall weight: 2,680 kg, enginetype: Electric, manufacturer: Haulotte Guedezca N Nepfx Akaog

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 - Regular maintenance carried out - Documentation available Special accessories: - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating Guedpey Dibxofx Akaog *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. The disclosure or transfer of the data provided by us is not permitted without our express written consent. Translated with (free version)

Condition: used, Year of construction: 1988, operating hours: 2,506 h, functionality: fully functional, machine/vehicle number: 032-230, We are offering this Unicontrol 10 window manufacturing machine from Michael Wenig AG. It is in used condition but fully functional. Year of manufacture: 1988, Machine No. 032-230 Including control cabinet! Comes with three complete sets of Leitz tools: - IV68 reversible cutting tool with standard profile - IV68 cornice profile for historic buildings - Tools for wood and aluminum windows The following tools are available (as shown in the pictures): 1x straight cutter, vertical and 1x horizontal 1x straight frame cutter, horizontal 1x tenon cutter, vertical, bottom and 1x top 1x cornice profile cutter, horizontal 1x tenon cutter, vertical 7 straight cutters 1x milling head frame, left/right/ top 1x milling head frame, bottom 1x milling head cutter, left/right/ top 1x milling head cutter, 2-wing, vertical 1x milling head cutter, bottom 1x milling head cutter, aluminum, for clipping 1x frame milling head, aluminum, for clipping 1x glass bead cutter, profile, standard 1x glass bead cutter, profile, cornice 1x roller shutter bead cutter It was decommissioned due to lack of space. Further information available upon request. Stored in a weatherproof location in 96231 Bad Staffelstein - Uetzing. Gjdozx Emdspfx Akaeug Collection at your own expense, including loading. We are happy to help, but due to the weight and the necessary loading equipment, we cannot take over the loading and transport and cannot provide any warranty. Price upon request. Private sale. Old, used machine. No warranty, return, or guarantee claims.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 5 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,092 kg, empty load weight: 908 kg, loading space volume: 10 m³, loading space width: 1,720 mm, loading space length: 3,875 mm, loading space height: 2,000 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts are possible when purchasing multiple containers. Europe-wide delivery possible by arrangement. Leasing/hire purchase options available. 12 units available in the short term, other RAL colors available upon request. Other versions and sizes are available ex warehouse Paderborn. You can view our stock on our website. Skip containers according to DIN standard. Technical description: * Internal dimensions: 3875 x 1720 x 2000 mm * Usable volume: 10 cbm * Tare weight: 908 kg * Floor: 5 mm S235 * Sides: 3 mm S235 Guodpfx Ajzu Rf Dskaog * 2 steel lids, torsion bar spring, vertically liftable * All sheets and profiles continuously welded * Asymmetrical * Container tested and approved according to DGUV Rule 114-010 * Corner reinforcements * Double-sided 3-point tipping bearing (bolt Ø45) * Stacking rail, L-profile * Securing rail * Frame edges U 80x50x4 * Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: used, machine/vehicle number: IC1482, Year of construction: 2014, operating hours: 5,158 h, load capacity: 1,000 kg, lifting height: 1,980 mm, fuel type: electric, mast type: mono, construction height: 2,380 mm, 5255509 Serial Number: F2027E006022 Gedpfx Akjzu U Ateaoug

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Year of manufacture: 2004 (date of manufacture 12/2004) Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Guedpfxezxgmxj Akaeg Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Description: For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: please request a quote.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 168 kg, input voltage: 1,000 V, KARCHER HDS 10/20-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 10/20-4M Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 500 - 1000 Gusdpfx Akezvfl Uoajg Working pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 7.8 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 168 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: excellent (used), container length: 10 ft, Equipment: cooling unit, Used, insulated 10 ft container (refrigerated container) Gsdpfx Aezwq Htekaoug Aluminum exterior cladding of the sandwich panels with air conditioning unit Manufacturer: DANTHERM Model: Flexibox 900 Outdoor Year of manufacture: 10/2023 I was unable to test the air conditioning unit. The plug-in control unit is missing. External dimensions of the container: Length: approx. 303 cm (plus approx. 50 cm for air conditioning unit) Width: approx. 243 cm Height: approx. 270 cm Internal dimensions of the container: Length: approx. 286 cm Width: approx. 243 cm Height: approx. 245 cm with crane lifting points Weight: approx. 1800 kg According to the data sheet, the container is also suitable as an external load for transport by helicopter. With data sheets/documentation! The container can be loaded onto a suitable vehicle in my warehouse!

Condition: new, power: 210 kW (285.52 HP), fuel type: diesel, empty load weight: 11,000 kg, maximum load weight: 5,000 kg, overall weight: 16,000 kg, tire size: 11R22.5, axle configuration: 4x4, wheelbase: 4,100 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,440 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, crane, cruise control, differential lock, fog lights, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, steel body, permit house, 1x air-suspended seat, double bench seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control system (ASR), constant throttle, PTO (power take-off), vertically mounted exhaust, automatic transmission, differential lock, fog lights, storage box, leaf suspension, trailer coupling with air, light, and hydraulic connections, underrun protection, pendulum flaps, roof hatch, crane behind the cabin, emergency stop, green environmental badge. Gsdpfx Akexap R Aoaoug Wheelbase: 4100 mm. Body: 3-way tipper with crane, 10–13 m/t, Atlas, Palfinger, or Hiab. Loading height approx. 1620 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 1,345 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 10 rpm, Equipment: documentation/manual, CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 Guodpfxszv T D Eo Akaog If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Gedpfxozukaus Akaoug Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 511900J00120, Year of construction: 2018, operating hours: 9,918 h, load capacity: 1,000 kg, lifting height: 6,200 mm, free lift: 2,200 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, TECHNICAL DETAILS Lifting height: 6,200 mm Free lift: 2,200 mm Lifting capacity: 1,000 kg Fork length: 1,150 mm Maximum fork width: 700 mm Attachment: Side shift MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery brand/type: 04EPZV0480SC Battery manufacturing year: 2020 Battery capacity: 480 Ah Battery voltage: 48 V Operating hours: 9,918 h Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,270 x 2,600 mm Unladen weight: 3,279 kg Transport packages: 1 unit EQUIPMENT Side shift Joystick Gujdpfezult Aex Akaeg Non-marking tires Free lift Documentation User manual CE marking

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Godpfehk Dfkex Akaeug Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Guedegf Sw Njpfx Akaeg Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Gujdpfoctg Rrsx Akasg -Quantity: 10 collets -Various sizes: 5-25 mm -Drawing in the pictures -Price/Sale: complete -Weight: 2.1 kg