Used Frozen Blocks Flaker (Shredder), Fr 100 for sale (29,120)

Condition: used, Haffner SL100 door lock milling machine for simultaneously: Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Drilling out the handle and keyhole using a drill bit. Technical data: - Chain cutter motor: 1.7 kW - Rebating cutter motor: 0.6 kW - Drill motor: 0.25 kW Lhjdpfx Aksztvw Njmjn - Blade length: 150 mm - Chain width: 12–17 mm

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Lhjdpsy Hkd Hofx Akmsn Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Lhodpfx Aszd Sdmjkmen Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Used shredder in good condition for sale. Serviced in September 2026. Lhodpfezu Rz Ssx Akmjn * Available at a special price of €9,950 net plus VAT, ex works Neckartailfingen. For shredding hard and soft wood of all kinds. Engine: 15 kW Weight: approx. 1,300 kg Used machine, sold as is. Functional guarantee upon delivery.

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Lhsdpfx Akjzizl Rsmjn Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46003, Technical characteristics: Work Area # Maximum diameter of the clamping plate: 220 mm # Maximum turning diameter: 170 mm # Maximum machining diameter: 170 mm # Maximum workpiece length: 100 mm # X-axis travel: 495 mm / Rapid feed in X: 48 m/min # Z-axis travel: 250 mm / Rapid feed in Z: 30 m/min # Standard enclosed automation (number of loading stations by workpiece diameter: 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm)) Main Spindle # Spindle interface to DIN 55026: Size A5 # Maximum speed: 7000 rpm # Power at 100% duty cycle: 23 kW # Torque at 100% duty cycle: 130 Nm Powered Tool Turret # Turret type: VDI40, Siemens drive 0.5.435.220, Manufacturer: Sauter # Number of stations: 12 # Maximum speed: 4000 rpm Electrical Equipment # Operating voltage: 400 V, fuse protection 80A GL Ledjxw Ub Ispfx Akmjhn # Connected load: 41 kW Dimensions # Total dimensions: Length = 3913 mm, Width = 2160 mm, Height = 2955 mm # Weight: 6500 kg Main Features and Capabilities: # Vertical design: Optimal chip evacuation and easy loading/unloading # CNC control: Siemens 840D SL # High precision: Positioning in X and Z axes via Heidenhain linear encoders # Main spindle - Manufacturer: Weiss, providing high power and wide speed range # Automated loading/unloading: Integrated automation supplies and removes parts # In-process probe: Marposs T25 # Live tooling: Allows drilling and milling operations in addition to turning # Chip conveyor: Knoll # Coolant filtration and cooling: Knoll KF150/950 paper filtering unit # Fire suppression system: Kraft & Bauer # Electrostatic oil mist filter: IF Vario EC1500 Machine status: WORKING

Condition: good (used), Year of construction: 2019, functionality: fully functional, A complete shredding system is for sale. The machine can be inspected at any time. Lhjdjz Ixfispfx Akmsn

Condition: excellent (used), mileage: 19,453 km, power: 74 kW (100.61 HP), first registration: 05/2024, fuel type: diesel, fuel: diesel, color: silver, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Number of doors: 5 Cab type: single Number of cylinders: 4 Ljdpfx Aksw T Szlsmehn Engine displacement: 1,500 cc Technical condition: very good Optical condition: very good Damages: none Warranty: none

Condition: good (used), mileage: 29,083 km, power: 57 kW (77.50 HP), first registration: 08/2022, fuel type: electric, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 3, total length: 5,350 mm, total width: 1,850 mm, total height: 1,900 mm, loading space length: 2,600 mm, loading space width: 1,580 mm, loading space height: 1,300 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Unladen weight: 2128 kg, Gross vehicle weight: 3055 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assist: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Air conditioning, Bluetooth, Engine power: 57 kW (76 hp), Fuel: electric, Type of gearbox: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L3H1 75 kWh Long Range Snelladen Airco PDC Rear doors Automatic 136 hp!, Tire type: All-season tires = Additional information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Ledpfx Aksz Nd E Eemohn Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 2,128 kg Payload: 927 kg GVW: 3,055 kg Functional Loading platform height: 60 cm Maintenance APK (Technical inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €383 per month (van, 72 months); Please inquire for further information and conditions.

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. Lhodjz Srm Nepfx Akmon The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: electric, Shredding machine MRZ 1530, Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ hydraulically operated slide Screen opening: 12 - 15 mm Suction nozzle Ø 200 mm Weight approx. 4,500 KG Dimensions (l x w x h) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - Profile rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics Ledpfxj Aa Nq To Akmehn - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Special guides for hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard, and MDF with a maximum hardwood content of 10% per hopper filling. If the hardwood content is higher, we recommend our MGZ series wood shredders. Other materials after testing and approval by the manufacturer. When shredding veneer or paper, a special scraper (at extra cost) is required to prevent the thin materials from getting under the hydraulic slide and causing it to jam. Requirements for the raw material: - The moisture content (oven-dry) must be below 14% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear - For an optimal shredding process, the material to be shredded must be pre-broken to a maximum of 140x80x30 cm before being fed into the wood shredder. The shredder is placed higher to prepare for the conveyor belt. The conveyor belt is not included!!!!!

Condition: used, Catalog number: 7536 – Made in Germany – Engine not included – Used wood chipper TECHNICAL DATA Inlet width: 530 mm Number of blades: 2 pcs Shaft diameter: 580 mm Inlet width: 420 mm Inlet height: 200 mm Ljdpfx Akozwwy Homehn Net price: 30,000 PLN Net price: 6,977 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0085, pressure: 6 bar, power: 895 kW (1,216.86 HP), temperature: 120 °C, Viessmann Vitoplex 100, 895 kW. Lodez Uikkepfx Akmehn

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Ledpfx Akoz N H D Domehn Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: new, functionality: fully functional, fuel type: gas, fuel tank capacity: 70 l, color: red, empty load weight: 117 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB BPM 100 | Hand-Push Crack Sealing Machine for Asphalt Repair & Maintenance The TICAB BPM 100 is a professional hand-push crack sealing machine designed for efficient asphalt crack filling, joint sealing, pothole edge repair, and preventive road maintenance. Compact, reliable, and easy to operate, it is the perfect solution for both urban and industrial pavement repair works. Lhodpfox U Atvox Akmjn Engineered for contractors, municipalities, and road maintenance crews, the BPM 100 ensures precise application of hot bitumen, crack sealant, or asphalt mastic, helping extend pavement service life and reduce long-term repair costs. Key Features ✔ 70 L tank capacity for bitumen, crack sealant, or asphalt mastic ✔ Efficient heating system (diesel or propane) ensures stable and consistent material temperature ✔ Hand-push design for excellent maneuverability and easy operation in confined areas ✔ Fast heating and ready-to-use performance for quick jobsite deployment ✔ Durable construction for intensive daily use in demanding environments ✔ Compact size ideal for urban maintenance and small repair teams Ideal Applications • Asphalt crack sealing and joint repair • Driveways, sidewalks, and bike paths • Parking lots and industrial pavements • Municipal streets and highways • Preventive road maintenance programs • Small and medium-scale asphalt repair works • Pothole edge reinforcement Built for Professional Road Maintenance Its precise heating and application system ensures high-quality sealing, preventing water penetration and further pavement deterioration. The TICAB BPM 100 is widely used by road contractors and municipal services looking for a reliable and cost-effective solution for asphalt maintenance. Why Choose TICAB BPM 100? • Simple operation with high productivity • Reliable heating system for consistent material performance • Compact and mobile design for any jobsite • Reduced maintenance costs and long service life • Professional results for crack sealing and asphalt repair The BPM 100 is the perfect balance between efficiency, mobility, and durability for everyday road maintenance tasks. Request a Quote Today Contact us for pricing, delivery options, and technical specifications. TICAB BPM 100 is available for fast production and worldwide shipping.

Condition: good (used), fuel type: diesel, color: white, Year of manufacture: 2017 Operating hours: 2.560 Lifting capacity: 550 kg CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: NL Please contact Vink Machinery for more information Knikmops 100 Lhsdpfxsx I Rbnj Akmsn * 2017 * Diesel * 2560 working hours * 2 meter lifting height * 550 kg lifting capacity * Hydro quick change * extra functions * including Dutch registration

Condition: used, total height: 2,400 mm, total length: 2,000 mm, total width: 950 mm, Year of manufacture: 2002 Colour: Blue Weight: 1.500 kg - Year: 2002 - CE marking present: Yes - Serial number: AY11051 - Saw direction: vertical - Main motor power [kW]: 15.0 - Wheel diameter [mm]: 915 - Max. cutting to feed roller opening [mm]: 230 - Max. cutting to stop opening [mm]: 260 - Max. cutting width to column [mm]: 300 - Max. total opening [mm]: 480 - Max. cutting height [mm]: 330 - Table width [mm]: 1010 - Table length [mm]: 740 - Max. band saw width [mm]: 100 - Min. band saw length [mm]: 5385 - Max. band saw length [mm]: 5485 - Min. band saw thickness [mm]: 0.8 - Max. band saw thickness [mm]: 1 - Feed roller type: Manual - Extraction port diameter [mm]: 150 - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.0 - Transport dimensions: 2000mm x 950mm x 2400mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ledszudb Eepfx Akmehn Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Shredder Dreher S20/20 No.:K2740 Funnel opening: 310mm x 340mm Lhodpfxowh I Uxs Akmsn Motor: 3kW 6.3 Amps 380 Voltage - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3 - Opening width [mm]: 310 - Opening length [mm]: 340 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of manufacture: 2013 Colour: Grey Price: On request - Year: 2013 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 - Opening length [mm]: 1400 - Number of rotating knives [pcs.]: 0 - Number of fixed knives [pcs.]: 100 Financial information VAT: The price shown is exclusive of VAT Lhedpfx Ajwz Nxxskmon VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2004, operating hours: 10,500 h, functionality: fully functional, power: 300 kW (407.89 HP), Wood chipping system BRUKS BK-RH485 – Year of manufacture 2004 For sale is a powerful wood chipping system, BRUKS BK-RH485, ideal for the industrial production of wood chips. The system is in good working order and has been regularly maintained. Technical data Model: BRUKS BK-RH485 Max. log diameter: 485 mm Min. infeed length: 1,500 mm Max. infeed length: 5,500 mm Rotor disk drive power: 315 kW Wood chip length: approx. 25 mm Capacity: 80–100 m³/h Lsdpez Tzrkefx Akmehn Operating hours: approx. 12,500 Year of manufacture / Commissioning: 2004 System no.: H4224653 Equipment & Components Step feeder Infeed belt Metal separator / metal detector 2x discharge augers (BRUKS): 600 × 6,500 mm 800 × 9,500 mm Control cabinet / control units Description The BRUKS BK-RH485 is designed for high throughput and heavy-duty industrial applications. Thanks to its robust construction and powerful drive technology, it is ideally suited for the production of homogeneous wood chips. The integrated metal separation and reliable feeding technology ensure safe and efficient operation.

Condition: used, Manufacturer: Gendron Type: RU 28-100 Max. grinding length: 1000mm Max. grinding diameter: 280mm Center-height: 155mm Ledownhkmopfx Akmjhn Table: 1660x150mm Grinding wheel: 300mm Machine-dimensions: 2700x1550x1500mm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Lhjdpfozxgglox Akmon Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, IPG Lodpfx Aezd Rmaskmehn Type Model: YLP-HP-2-1500-50-100 IPG Ytterbium Fiber Laser 90-240 VAC Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Lhedpfx Akezimaaomon Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Lhjdpfei Ebhhsx Akmen