Used Galen Rotary Log Debarker for sale (6,020)

Year of construction: 2023, condition: new, 1. Trapeze Bucket (or Trenching Bucket): Purpose: As the name suggests, a trapeze bucket is primarily used for digging trenches. These trenches are often required for laying utilities such as water, gas, or electrical lines. Design: A trapeze bucket is typically narrower than standard digging buckets, and it may have a trapezoidal shape to create trenches of a specific width and depth. Advantages: Dcedpfx Aden Dxf Dsrsk Precision: Designed for accurate and clean trenching, reducing the need for manual labor to finalize the trench. Efficient: Enables faster excavation, especially for straight-lined trenches. Versatile: Some are designed with replaceable teeth or edges, making them suitable for various ground conditions. 2. Ditch Cleaning Bucket (or Grading Bucket): Purpose: This bucket is used for leveling, grading, cleaning ditches, removing debris, and back-filling trenches. Design: Typically broader and flatter than standard digging buckets, a ditch cleaning bucket might also have a smooth edge to ensure a clean finish. Advantages: Wide Reach: Its broader design means it can cover larger areas in one sweep, making grading and leveling tasks quicker. Smooth Finishing: The flat base allows for a smoother finish on surfaces, which is especially important when preparing for foundations or paving. Versatility: Excellent for landscaping projects, creating drainage slopes, or even spreading materials evenly across a site. Conclusion: The right bucket can make all the difference in a mini excavator's efficiency and the quality of its work. By understanding the specific functions and advantages of the trapeze bucket and ditch cleaning bucket, operators can ensure that they are using the right tool for the job, optimizing productivity and outcomes.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Dsdpfx Ajyy U Shsdrjck Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven Complete with one mobile oven rack In good working condition Dsdsyw T D Djpfx Adrjck

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Dcedpjtrhv Sjfx Adrok Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels Dsdpfxowugcze Adrsck 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm Dsdpsy Tn Enjfx Adrsck • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Dcjdpfju Dbkdox Adrjk Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: used, Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Dcedpfx Aswp E Hzsdrsk Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: used, Rotary Airlock Feeder, Rotary Feeder – Used Machine Manufacturer: VEM / VEB Elektromotorenwerke Thurm (GDR) Model: ZG3 KMRB 80 G 4 Overall Dimensions: Width: 1210 mm Depth: 380 mm Height: 590 mm Technical Specifications: Motor Power: 1.5 kW Dcedpszrwqnofx Adrsk Output Speed: 40 rpm Output Torque: 354 Nm Voltage: 220/380 V (Three-phase) Rated Current: 6.2 / 3.6 A Year of Manufacture: 1989

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES - Manufactured by the Polish brand SAFO - DTR+CE documentation - Includes sleeves - Used chamfering machine, very good condition Dcjdpfozrui Iex Adrek Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: used, Rotary Airlock Feeder, Rotary Feeder – Used Machine Overall Dimensions: Width: 1780 mm Depth: 410 mm Height: 620 mm Dcsdpfxozqatvj Adrsk Pocket Size: 220 × 100 × 120 mm Number of Pockets: 8 Electrical Specifications: Voltage: 400 V Power: 0.75 kW Current: 2.1 A

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Dcodpfozp Ilqox Adrjk

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Working diameter: 4,000 mm Working height: 730 mm X-axis: 1,110 mm Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. As part of this modernization, the entire automation and drive technology was converted to Siemens technology. Dcodpoztc T Djfx Adrjk The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 360 mm Table height: 130 mm Transmission ratio: 120 : 1 Clamping surface: 375 x 430 mm Grid pattern on clamping surface: 400 x 125 mm, Ø 14 mm - Indirect indexing via handwheel on the worm gear, transmission ratio: 120:1 - Worm gear can be engaged/disengaged for direct and indirect indexing - Clamping via 2 clamping levers in any position - Crank handle with index plate Djdey Sbwzspfx Adrsck - 1 index plate with hole counts: 22, 24, 29, 36, 37, 49, 57, 63 - 1 index plate with hole counts: 16, 27, 30, 33, 41, 47, 53, 61 - 1 index plate with hole counts: 23, 25, 28, 31, 39, 43, 51, 59 - 14 mm T-slots in the table surface - Table surface slightly face milled Overall dimensions L x W x H: 600 x 440 x 130 mm Weight: 81 kg Good condition

Condition: used, Inlet diameter: 260 mm with sprocket and drive shaft Dcsdpfx Adezr Hg Sjrjk

Condition: used, Inlet cross-section approximately 450 mm with SEW gearmotor, 3 kW. Dedpozr Hglefx Adrock

Condition: used, Gripper width: approx. 550 mm. Dcjdpfxozr D Nko Adrsk

Condition: used, Vacuum pump, rotary vane pump, sliding vane pump, vacuum pump, cleanroom pump BECKER Type VX 4.40 High Vacuum Pump Serial No.: 2583674 Year of manufacture: 2011 Capacity: 40 m³/h Vacuum: -0.8 bar (determined during test run) Vacuum: -0.9 bar (manufacturer's specification) Djdpfx Adszrzyajrsck Suction connection: G 3/4" Motor speed: 1420 rpm Motor power: 1.25 kW Power connection: 400 Volt, 50 Hz - dry-running, oil-free rotary vane vacuum pump - sound insulation made of polystyrene (Styrofoam) Dimensions with sound insulation housing L x W x H: 820 x 460 x 350 mm Dimensions without sound insulation housing L x W x H: 540 x 250 x 280 mm Weight: 45 kg Very good condition

Condition: good (used), Rotary drive for air flaps, rotary air flap drive -Manufacturer: Siemens -Type: GBB161.1E Dcsdpfed Tn Ddex Adrsk -unused from: warehouse liquidation -Number: 3x available -Price: per piece -Dimensions: 340/105/H105 mm -Weight: 2 kg

Condition: excellent (used), Catalog number: 8058 TECHNICAL DATA - max. log diameter approx. 750mm - main engine 55kW ADVANTAGES – German-made – for debarking logs – used debarker, very good condition – machine equipped with a feeder and an outfeed Dodpfx Aezpwrysdreck – video showing the machine in operation *This is a courtesy listing – the machine is located at a sawmill 15 km from the company's headquarters. Net price: 105,000 PLN Net price: 25,000 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: used, machine/vehicle number: R92, Used KOSME rotary bottle filling machineTechnical Specifications & Performance DataThis rotary rinser-filler is engineered by KOSME for precise, reliable wine bottling within industrial packaging environments. The carousel configuration ensures consistent bottle handling and steady throughput suitable for beverage production, including second hand and used bottling line integrations.Machine type: Rotary rinser-filler (carousel)Manufacturer: KOSMEPrimary application: Still wine fillingProduction speed: Typically a few thousand bottles per hour (configuration-dependent)Bottle size range: Approx. 0.25L to 1.5L (typical 0.75L wine format)Containers: Glass bottlesFilling principle: Level-controlled gravity or light vacuum (light depression)Rinsing: Integrated rinser with three spray stagesProduct contact materials: Stainless steelEnclosure: Glazed, lockable safety guardingAdvanced Automation & Control SystemsThe machine supports both automatic and manual operation to adapt to production needs and changeovers. Operator controls promote safe, efficient handling while maintaining high-quality filling.Automatic/manual mode selectorManual jog and machine start/stop controlsSpeed control for carousel rotation and process optimizationEmergency stop and reset-to-zero functionsLight signal for status indicationGate interlock and glazed safety enclosure for operator protectionDedicated rinsing control with three spray stagesProduction Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or operation as a standalone unit, this rotary rinser-filler interfaces easily with upstream depalletizing/inspection and downstream labeling, capsule application, and secondary packaging machinery. Its glass-bottle handling and stable carousel motion support consistent infeed and discharge on standard conveyor systems.Inline or standalone operationCompatible with conveyors and accumulation systemsFormat range suited to common wine bottles: 0.25L, 0.75L, 1.5LIdeal for beverage production environments focusing on wineMachine Condition & Maintenance HistoryThe machine has operated in a well-maintained environment and features a full glazed, lockable enclosure that preserves hygiene and safety. Backed by KOSME engineering, spare parts and service support are readily accessible through established industrial channels. The overall condition is aligned with second hand equipment prepared for reliable start-up in professional beverage production.Operational Performance & VersatilityPurpose-built for still wine, the level-controlled gravity or light-vacuum system ensures consistent fill levels across a range of formats without over-pressurizing glass containers. The stainless steel product-contact surfaces support hygienic operation and quick cleaning, while the integrated rinser with three spray sta... Dcjdezrgrbopfx Adrok

Condition: used, Year of construction: 2003, machine/vehicle number: M321, Used Acma rotary trigger filling monoblockTechnical Specifications & Performance Data2003 Acma RC15/6-200 with 15-valve rotary filler (gravity/light depression) and 8-head capping turret for 28 mm plastic screw closures. Rated speed 5000 Bottles/hour. Configured for detergents in glass or PET containers across 500 ml, 650 ml, 750 ml, 1 L formats. This used rotary filling machine provides compact, synchronized filling and capping on a single carousel.Manufacturer: AcmaModel: RC15/6-200Year of manufacture: 2003Machine concept: Rotary filling monoblock with integrated capper and cap sorterCategory: Filling MonoblockSpeed: 5000 Bottles/hourProduct types: DetergentsContainer types: Glass, PETFormats: 500 ml, 650 ml, 750 ml, 1 LFiller: 15 mobile nozzles; gravity/light depressionCapper: 8 heads; cap size 28 mm; neck 28 mm; cap type: plastic screwCompliance: CE markedAdvanced Automation & Control SystemsThe RC15/6-200 couples a synchronized rotary filler and capper with automatic cap sorting/feeding. Format parts enable rapid changeover between 0.5 L to 1.0 L. Operator controls coordinate turret timing and capping torque for stable throughput. This monoblock filling machine minimizes handling steps while maintaining fill accuracy and closure quality.Synchronized rotary filler/capper with integrated cap sorterQuick-change format parts for multiple bottle sizesControlled torque application and repeatable fill accuracyCE-compliant guarding and safety logicProduction Line Integration CapabilitiesDesigned for inline placement with upstream bottle handling and downstream equipment. Interfaces cleanly with infeed/outfeed conveyors, labeling, and case packing. For trigger applications, the capping stream can be paired with a downstream trigger capper when required.Inline operation with upstream and downstream conveyorsCompatible with screw-closure ecosystems and downstream trigger cappersFormat scope: 0.5 L, 0.65 L, 0.75 L, 1.0 LSuitable for integration in existing or new linesMachine Condition & Maintenance HistoryOffered in ready for operation condition. This used rotary filling machine is presented as operational equipment; standard integration and commissioning procedures are recommended. Original CE marking is present.Operational second-hand equipmentReady-for-operation conditionOriginal CE markingOperational Performance & VersatilityConfigured for 28 mm plastic screw closures on 28 mm necks. Smooth rotary handling supports consistent output across 500 ml to 1 L. The monoblock filler maintains stable cycles for detergent products in glass or PET.Consistent gravity/lig... Dodpfx Aoymdpzsdreck

Condition: used, Bundle or log saw Guide 150cm Dcedpfx Asztk Dwjdrek 6.3 kW-9 HP motor 380V Chain lubrication Chain in average condition (several teeth missing)

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. Dodpfxezr Hw De Adrjck With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures Dodot Hf T Hjpfx Adrsck machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t