Used Guard Column for sale (8,124)

Condition: ready for operation (used), Year of construction: 1996, Travel X/Y/Z: 740mm/500mm/480mm, tool holder: SK40, tool positions: 22, max. spindle speed: 4700rpm, control: Heidenhain TNC 426 PA. Machine dimensions: approx. 3000mm/2400mm/2700mm, weight: approx. 5000kg. The machine was used exclusively for machining plastic and operated without metalworking fluid. The coolant system must be repaired. The backup battery of the control is depleted and must be replaced. Inspection possible by arrangement. Nedozukt Uepfx Airewn

Condition: excellent (used), Control system: Siemens 840-D Nodpezv Hxcofx Airswn X-axis travel: 2000 mm Y-axis travel: 2000 mm Z-axis travel: 500 mm Distance between columns: 2700 mm Max. working height: 1100 mm Table: 2250 x 2000 mm Workpiece weight: 10 tonnes Spindle power: 24 kW Spindle speed: 2250 rpm Tool holder: SK 50

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: DN175501, 1x Abus VS column-mounted swivel crane, NL 500 KG Load capacity at full extension: 500 KG / 0.5 tonnes Height: approx. 4 m (including base: 0.35 m) Outrigger length: approx. 3.7 m Reach: approx. 3.5 m Hook height: approx. 3.3 m Total weight: approx. 450 kg Including Abus chain hoist with floor control (2 lifting speeds) Nedpfx Aiozv Hyterown with swivel and trolley drive Connection to 400V, 16A, swivel range 360° Crane is disassembled and immediately available The gripper is not included! Item location: 75053 Gondelsheim Only the crane system shown in the pictures is sold. Very good condition, see pictures Shipping by freight forwarder or collection by appointment.

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm Nwedpoy Nd Svofx Airsn total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, pressure 130 t throat 450 mm stroke 20 - 200 mm max. distance table - ram at biggest stroke 500 mm no. of strokes 80 Hub/min ram adjustment 110 mm table surface area 1400 x 880 mm ram surface 900 x 450 mm total power requirement 11 + 2,2 (Hydraulik) kW weight of the machine ca. 14 t dimensions of the machine ca. BxTxH 1,55 x 2,68 x 3,46 m Features: - hydraulic clutch - hydraulic overload protection Nwedpfszupkfsx Airon - hydraulic ram adjustment - cam-operated shift mechanism - enlarged table The machine is being partially overhauled at our facility as follows: - complete disassembly and inspection - new paint job - new main drive - new separate control cabinet with touch panel, including machine wiring - Left/right work area enclosure with safety light curtain and cycle operation - New two-hand control panel on a separate stand

Condition: new, pressure 400 t distance between columns 600 mm stroke 600 mm table-size 3000 x 1500 mm travel x / y 2200 x 900 mm working feed 7 mm/sec tank capacity 66 l working pressure 30-250 bar total power requirement 18,5 kW weight of the machine ca. 25 t dimensions of the machine ca. 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation Nodpezyvakjfx Airjwn - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: good (used), pressure 250 t Nwodpfxexcblws Airen passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: used, 4-column punching tool, parting tool, punching tool, punch, punching die, punching punch Njdpfx Aod Sgaaoirown -4 pillars: punching tool -Dimensions: 395/195/H240 mm -Weight: 54 kg

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t Nwsdsu I E Emepfx Airon required space 16,8 x 10,3 x 7,9 m

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Nwjdpfx Aisu I Hptjrsn -Punching tool: 2 columns, Ø 10/14/10 mm -Punching dimensions: see photo with dimensions -Dimensions: 265/105/H150 mm -Weight: 11.7 kg

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Nsdpfx Aoygx D Hsirewn Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Nodpov Tp D Hsfx Airswn Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse Nwjdpfx Ajxwdygoirjn X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2680 mm -Swivel range: 270° -Chain hoist: HADEF type CH1 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm Njdpjxwtw Usfx Airown -Empty weight: 550 kg

Year of construction: 2020, condition: good (used), Impact protection, crash protection, shelf protection, column protection, column impact protection -Column impact protection: for square columns and steel beams, 4 pieces / 1 set -Type: Type 4 SAS-4-1501-34 Nwjdpoyvzk Asfx Airon -Height: 800 mm -Internal dimensions: 320 x 320 mm -Dimensions: 625/625/H800 mm -Weight: 18 kg

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm Nwjdpjy Dvlqjfx Airen speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Year of construction: 1979, condition: excellent (used), machine/vehicle number: Kran, 25 Abus pillar jib cranes 250 500 1000KG payload available, length 4m Please inquire with exact dimensions such as overhangs, overall height, payload etc It is offered: 1x ABUS VS pillar jib crane jib crane chain hoist crane slewing crane 500KG 0.5t 6m PB7 (Picture 1-6) Technical specifications: 1 ABUS VS pillar jib crane 500 KG payload / lifting load Payload with full reach 500 KG / 0.5to Height: approx 3.9m Outreach: approx. 4 m, hook height: approx. 3 m dowel plate 140x140cm (approx 950KG) Weight completely approx. 1750 kg Nwodpfx Aijfi U E Deron with Demag chain hoist Connection to 400V 360 ° swivel range The item location is 75053 Gondelsheim Only the offered crane system shown in the pictures is sold See pictures Shipping by carrier or pickup Feedback geben Verlauf Gespeichert Community

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm Nwsdpfx Aijf Sa N Ueren -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Condition: new, Year of construction: 2026, CORMAK H300SA Automatic Band Saw The CORMAK H300SA automatic band saw is an advanced technological machine designed for professional cutting of solid materials, steel profiles, and pipes. Thanks to its robust construction, high-quality components, and fully automated cutting process, this model is an ideal solution for production plants, metalworking companies, and machining centers where repeatability, precision, and efficiency are essential. Main advantages of the machine Fully automatic operation – the complete cutting cycle is performed without operator intervention. Hydraulic vise and material feeding system – increased efficiency, accuracy, and safety during operation. Two-column band saw construction – provides high rigidity and precise blade guidance. Arm and vise position memory system – reduces cycle times and improves cutting repeatability. Cooling system and powered cleaning brush – extend band saw blade life and improve cutting quality. Machine construction and technology The saw body is made of cast iron mounted on a rigid frame structure. The frame is inclined at a 3° angle, improving the quality of cutting closed profiles. The blade guides, based on bearings and carbide inserts, ensure excellent stability and cutting precision. The hydraulic feeding unit enables accurate and smooth movement of workpieces up to 500 mm in a single feed stroke. Precision and work efficiency Nsdeiz S Nyjpfx Airswn The H300SA model features hydraulic arm feed with stepless adjustment, allowing cutting parameters to be optimized for different materials. The cooling system and cleaning brush significantly reduce blade wear, improving productivity and minimizing downtime. The automatic operating cycle enables precise serial cutting with minimal operator involvement. Applications The CORMAK H300SA automatic band saw is an excellent solution for: production companies processing steel, cast iron, and non-ferrous metals, steel construction plants, steel distributors and logistics centers, companies specializing in pipe and profile prefabrication. Standard equipment Automatic operating mode Hydraulic vise and material feeding unit Arm and vise position memory system Powered blade cleaning brush Cooling system Bi-metal band saw blade CE declaration of conformity Operating manual and technical documentation (DTR) Technical specifications – CORMAK H300SA Automatic Band Saw Parameter Value Cutting capacity Ø 300 mm / 300 × 300 mm Bundle cutting capacity Max. 260 × 90 mm Blade dimensions 3505 × 27 × 0.9 mm Blade speeds 40 / 60 / 80 m/min Arm feed Hydraulic, stepless adjustment Main motor power 3.8 kW Hydraulic unit motor power 0.75 kW Coolant pump motor power 0.09 kW Feeding stroke 500 mm Load capacity 1500 kg Machine dimensions (L × W × H) 1750 × 1950 × 1550 mm Weight 1200 kg

Condition: good (used), 2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Punching tool: 2 columns -Stroke: 40mm Nwjdpomxpt Sjfx Airon -Stamp: without accessories, see photos -Dimensions: 245/240/H240 mm -Weight: 30 kg

Condition: new, DRILL PRESS WITH BELT DRIVE DIGITAL DEPTH GAUGE, REVERSIBLE TABLE WITH INTEGRATED VISE AND SCORER LED LIGHT Quick-action keyless chuck 1 - 16 mm B18 CM 4 chuck attachment SUPPLIED. Drilling capacity on cast iron with Ø 32 mm pre-hole. Max drilling capacity on steel with pre-hole (s235jr) Ø 28 mm Continuous drilling capacity Ø 20 mm Morse taper 4 Spindle 1 - 16 mm B18 Approximate spindle speed (12) 150 - 2450 rpm Spindle stroke 120 mm Spindle sleeve ø 62 mm Column ø 92 mm Height 1720 mm Spindle-column distance 255 mm Distance from machine nose to table 700 mm Table dimensions 460 x 425 mm Distance machine nose-base 1220 mm Hollow 14 mm Clamp 210 x 165 mm Nsdpom E Uhwjfx Airown Single-phase motor 230 V 50 Hz 1.5 kW Net weight 135 kg Packaging dimensions 1415 x 655 x 320 h mm Gross weight 158.00 kg

Condition: new, Shelving frame column cover. The Mega-M storage rack leg bumper is made of yellow lacquered steel. It has 4 holes for permanent installation in the floor and lateral holes for attaching e.g. a horizontal beam. The buffer provides greater safety for forklifts to move around the warehouse, reducing the risk of serious racking repairs. -Made of yellow lacquered steel. -Universal and easy to install. -Mounted on the front side of the racking. -Makes it possible to attach horizontal beams. -Used in industry to protect shelves from mechanical damage. -Increases safety, reducing warehouse maintenance costs. The offer concerns the leg bumper: Product code: MTP001334 - Height: 400 mm - Width: 170 mm - Length: 300 mm - Metal thickness: 4 mm - Mounting hole diameter: 15 mm - Colour: RAL1023 yellow - Pallet quantity : 108 pieces Net price : 11 euro each. We have a wide range of shelving components, both new and used: frames, crossbars/beams and shelving fillings: crossbeams, WEMA gratings, mesh shelves or chipboards. Prices quoted are for the sale of wholesale quantities for export outside Poland, please contact us for details. Would you like to check wholesale and retail prices within Poland please contact us. * The above price is valid for a minimum purchase of one pallet. Nodom Sg Dhjpfx Airswn * Transport throughout Europe possible. * The aforementioned offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: good (used), Manufacturer: DIGÉP Tip: SD 100 Nsdpfx Aom Uc R Asirjwn

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm table dimension - longitudinal 400 mm Njdpfx Aisvwgqrorewn dimensions of the machine ca. 1400 x 1050 x 2350 m

Condition: new, Technical specifications: Two-phase mains voltage: 400 V. Mains frequency: 50/60 Hz. Nodpfx Ajhzg Ihoirjwn Maximum welding current: 9700 A. Maximum open-circuit voltage: 2.6 V. Maximum sheet thickness (2 sides): 3+3 mm. Maximum electrode force: 190 daN. Arm extension: 330 mm. Rated power X=50%: 22 kW. Rated power X=50%: 15 kW. Power factor: 0.7 (cosphi). Duty cycle: 15%. Dimensions: 79 – 32 – 128 cm. Weight: 118 kg. Resistance spot welding machine (spot welder), column-mounted, with oscillating arm and digital microprocessor control. The multifunctional digital LCD panel allows operation in EASY mode (setting the current and welding time) and EXPERT mode (setting various welding parameters) with the possibility of saving up to 20 custom programs. Continuous and pulsed operation ensures excellent welds on various types of steel. Features: Adjustment of welding current (%), welding time (cycles), pressure, and electrode closing speed. Selection of various cycle parameters (approach time, ramp time, welding time, pause time, and number of pulses). Easy-to-read LCD display. Pneumatic operation. Thermal protection with indication. Airflow adjustment for slowing down the arm closing. This model requires water cooling for the electrodes and arms. INCLUDED: Arm L=350 mm. Standard straight electrode.